Methods for rapid cloning and detection for sequencing of cloned inverse PCR-generated DNA fragments adjacent to known sequences in bacterial chromosomes.

Since the invention of PCR, many adaptation techniques have been developed for sequencing DNA fragments flanking known sequences. Of them, inverse PCR is a matter of interest because of the simplicity of its principle. However, the protocols for inverse PCR introduced so far consist of some time-consuming procedures, and with them, we cannot "walk" chromosomes too far since the number of suitable restriction enzymes is limited. Our experiments led to confirming simpler technical approaches applicable to the case of bacterial chromosomes, that is, designing two end-specific "contextual" sequences with which we can quickly detect the desired clones of targeted DNA fragments by simply analyzing PCR products, employing "the minimum value of the desired fragments" as a "discriminating minimum" value to decrease contaminant DNA fragments, and creating a new tandem of two cleaved end fragments of a known sequence ("reordering") for PCR amplification in combination with cloning of the inverse PCR-generated DNA. With the improvements, we could both simplify the procedures and broaden the capacity of the inverse PCR in "walking" chromosomes.     

Single primer-mediated polymerase chain reaction: application in cloning of two different 5'-untranslated sequences of acidic fibroblast growth factor mRNA.

Polymerase chain reactions (PCR) are used to generate specific DNA sequences from minute amounts of DNA templates using a pair of oligonucleotide primers. To amplify regions of unknown sequence, methods such as inverted PCR, Alu PCR, and rapid amplification of cDNA ends (RACE) have been developed. These methods require several enzymatic manipulations of DNA which are either tedious or only suitable for certain special conditions. We have explored the possibility of PCR using a single primer. This method takes advantage of the fact that partial complementarity provides sufficient affinity for the oligonucleotide primer to anneal to a secondary, imperfect binding site. Thus, no modification of DNA template was required for the single primer-mediated PCR. We have used this method to generate two different aFGF cDNA clones containing different 5'-untranslated sequences.     

Chromosomal walking of flanking regions from short known sequences in GC-rich plant genomic DNA

High-efficiency thermal asymmetric interlaced (HE-TAIL) PCR is a modified thermal asymmetric interlaced (TAIL) method for finding unknown genomic DNA sequences adjacent to known sequences in GC-rich plant DNA. Necessary modifications to obtain high-efficiency amplification of flanking sequences are the inclusion of 2 control reactions during tertiary cycling and the design of long gene-specific primers, which can be used during single-step annealing-extension PCR. The modified protocol is suitable to walk from short known sequences, such as sequence-tagged sites (STS), expressed sequence tags (EST), or short exon sequences, and enables researchers to clone full-length open reading frames (ORFs) without library screening. Moreover, the HE-TAIL method can be used to identify DNA sequences flanking T-DNA insertions or to isolate promoter regions. Although individual steps are limited to about 4 kb, multiple steps can be done to walk upstream or downstream of known regions.     

Validation of fluorescence-labeled artificial nonhuman sequences for single-strand conformation polymorphism mutation detection in familial hypercholesterolemia

We developed a two-in-one, polymerase chain reaction (PCR)-based method with a specific amplification step and a universal amplification step in one tube to screen for the presence of DNA variations. The method relies on fluorescence-labeled artificial nonhuman sequences for mutation detection. To document utility, we applied this method as a high-throughput capillary single-strand conformation polymorphism screening system to identify 30 mutations in the low-density lipoprotein receptor gene. The sensitivity of mutant allele detection compared to wild-type allele detection was 93%. We conclude that the "two-in-one PCR" is sensitive, simple, and cost effective.     

Headloop suppression PCR and its application to selective amplification of methylated DNA sequences

Selective amplification in PCR is principally determined by the sequence of the primers and the temperature of the annealing step. We have developed a new PCR technique for distinguishing related sequences in which additional selectivity is dependent on sequences within the amplicon. A 5′ extension is included in one (or both) primer(s) that corresponds to sequences within one of the related amplicons. After copying and incorporation into the PCR product this sequence is then able to loop back, anneal to the internal sequences and prime to form a hairpin structure—this structure is then refractory to further amplification. Thus, amplification of sequences containing a perfect match to the 5′ extension is suppressed while amplification of sequences containing mismatches or lacking the sequence is unaffected. We have applied Headloop PCR to DNA that had been bisulphite-treated for the selective amplification of methylated sequences of the human GSTP1 gene in the presence of up to a 10⁵-fold excess of unmethylated sequences. Headloop PCR has a potential for clinical application in the detection of differently methylated DNAs following bisulphite treatment as well as for selective amplification of sequence variants or mutants in the presence of an excess of closely related DNA sequences.     

A simple and efficient amplification method of DNA with unknown sequences and its application to microdissection/microcloning.

An alternative method for amplification of DNA with unknown sequences was developed. This involves the direct ligation of a primer oligodeoxyribonucleotide itself to restricted DNA fragments with unknown sequences to be amplified by PCR. The oligonucleotide need not be phosphorylated and need not be annealed with its complementary oligonucleotide in advance for ligation. The ligation reaction seems to be independent of the concentration of unknown DNA, proceeds in short time, and is efficient. The ligation efficiency was more than 30% at a low concentration, 10 fg/microliters, of DNA. This method was applied to a microdissection/microcloning of the short arm of human chromosome 2. Of 65 clones screened for the highly repetitive sequences with total human genomic DNA, eleven (17%) were positive. Their inserts ranged in size from 150 to 1,200 bp (average, 460 bp). In Southern blot analysis, thirty consecutive clones all detected signals common to both total human genomic DNA and mouse-human hybrid cell DNA containing only chromosome 2 of human origin. Among them, 24 (80%) were unique sequences, and 6 (20%) were multi-copy (or intermediate-repeat) sequences. Thus, this method is simple and efficient, and provides an alternative way to amplify unknown DNA.     

Relative quantification of 40 nucleic acid sequences by multiplex ligation-dependent probe amplification

We describe a new method for relative quantification of 40 different DNA sequences in an easy to perform reaction requiring only 20 ng of human DNA. Applications shown of this multiplex ligation-dependent probe amplification (MLPA) technique include the detection of exon deletions and duplications in the human BRCA1, MSH2 and MLH1 genes, detection of trisomies such as Down’s syndrome, characterisation of chromosomal aberrations in cell lines and tumour samples and SNP/mutation detection. Relative quantification of mRNAs by MLPA will be described elsewhere. In MLPA, not sample nucleic acids but probes added to the samples are amplified and quantified. Amplification of probes by PCR depends on the presence of probe target sequences in the sample. Each probe consists of two oligonucleotides, one synthetic and one M13 derived, that hybridise to adjacent sites of the target sequence. Such hybridised probe oligonucleotides are ligated, permitting subsequent amplification. All ligated probes have identical end sequences, permitting simultaneous PCR amplification using only one primer pair. Each probe gives rise to an amplification product of unique size between 130 and 480 bp. Probe target sequences are small (50–70 nt). The prerequisite of a ligation reaction provides the opportunity to discriminate single nucleotide differences.     

A-T linker adapter polymerase chain reaction for determining flanking sequences by rescuing inverse PCR or thermal asymmetric interlaced PCR products

The polymerase chain reaction (PCR)-based genome walking method has been extensively used to isolate unknown flanking sequences, whereas nonspecific products are always inevitable. To resolve these problems, we developed a new strategy to isolate the unknown flanking sequences by combining A-T linker adapter PCR with inverse PCR (I–PCR) or thermal asymmetric interlaced PCR (TAIL–PCR). The result showed that this method can be efficiently achieved with the flanking sequence from the Arabidopsis mutant and papain gene. Our study provides researchers with an additional method for determining genomic DNA flanking sequences to identify the target band from bulk of bands and to eliminate the cloning step for sequencing.     

A method for amplification of unknown flanking sequences based on touchdown PCR and suppression-PCR

Thermal asymmetric staggered PCR is the most widely used technique to obtain the flanking sequences. However, it has some limitations, including a low rate of positivity, and complex operation. In this study, a improved method of it was made based on suppression-PCR and touchdown PCR. The PCR fragment obtained by the amplification was used directly for sequencing after gel purification. Using this improved method, the positive rate of amplified flanking sequences of the ATMT mutants reached 99%. In addition, the time from DNA extraction to flanking sequence analysis was shortened to 2 days with about 6 dollars each sample.     

A novel and rapid cloning method for the T-cell receptor variable region sequences

Conventional polymerase chain reactions (PCR) require sequence information on both ends of the DNA to be amplified. The novel technique described here allows the amplification of cDNA fragments with sequence information from one end only. Blunt-ended double-strand cDNA is prepared, circularized with T4 DNA ligase and used as a PCR template. The two PCR primers are desinged to hybridize to the known region in an outward orientation allowing the amplification of the unknown sequence. The method was established using the -chain of T-cell antigen receptors (Tcr) as an example. The cDNA synthesized from 1 g of total RNA from human peripheral lymphocytes was amplified and cloned resulting in a library of 1–2 × 10⁶ Tcr-specific clones. The method should also be useful for cloning full-length cDNA or for the identification of new members of a gene family that share a conserved domain.     

Sensitive measurement of unmethylated repeat DNA sequences by end-specific PCR

We describe a new method that is well-suited for the determination of the methylation level of repetitive sequences such as human Alu elements. We have applied the method to the analysis of cell and tissue DNAs and expect it to have wide utility in studies of DNA methylation in cancer and other disease states, in monitoring response to epigenetic cancer therapies and in epidemiological studies. Only 1 ng DNA is needed for a duplex, one-tube real-time PCR in which methylation level and the amount of input DNA are concurrently measured. The relative cutting by the methylation-sensitive enzyme BstUI is compared with that of the methylation-insensitive enzyme DraI to give a measure of DNA methylation. The method depends upon the use of 5'-tailed, 3'-blocked oligonucleotides called facilitator oligonucleotides (Foligos). Only cut DNAs with specific matching sequences at their 3' ends can copy the tails of the Foligos and thus become tagged and available for subsequent PCR. Both the tagging and PCR are carried out by the same enzyme, Taq DNA polymerase. Because amplification only occurs if suitable ends have been generated in the target DNA, we have called this method end-specific PCR (ESPCR). ESPCR avoids the bisulfite treatment step that is usually required to measure methylation.     

Rolling circle amplification of genomic templates for inverse PCR (RCA–GIP): a method for 5′- and 3′-genome walking without anchoring

We have devised an improved method of genome walking, named rolling circle amplification of genomic templates for Inverse PCR (RCA–GIP). The method is based on the generation of circular genomic DNA fragments, followed by rolling circle amplification of the circular genomic DNA using ϕ29 DNA polymerase without need for attachment of anchor sequences. In this way from the circular genomic DNA fragments, after RCA amplification, a large amount of linear concatemers is generated suitable for Inverse PCR template that can be amplified, sequenced or cloned allowing the isolation of the 3′- and 5′- of unknown ends of genomic sequences. To prove the concept of the proposed methodology, we used this procedure to isolate the promoter regions from different species. Herein as an example we present the isolation of four promoter regions from Crocus sativus, a crop cultivated for saffron production.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

DNA analysis with multiplex microarray-enhanced PCR

We have developed a highly sensitive method for DNA analysis on 3D gel element microarrays, a technique we call multiplex microarray-enhanced PCR (MME-PCR). Two amplification strategies are carried out simultaneously in the reaction chamber: on or within gel elements, and in bulk solution over the gel element array. MME-PCR is initiated by multiple complex primers containing gene-specific, forward and reverse, sequences appended to the 3′ end of a universal amplification primer. The complex primer pair is covalently tethered through its 5′ end to the polyacryl- amide backbone. In the bulk solution above the gel element array, a single pair of unattached universal primers simultaneously directs pseudo-monoplex PCR of all targets according to normal solution-phase PCR. The presence of a single universal PCR primer pair in solution accelerates amplification within gel elements and eliminates the problem of primer interference that is common to conventional multiplex PCR. We show 10⁶-fold amplification of targeted DNA after 50 cycles with average amplification efficiency 1.34 per cycle, and demonstrate specific on-chip amplification of six genes in Bacillus subtilis. All six genes were detected at 4.5 pg of bacterial genomic DNA (equivalent to 10³ genomes) in 60 independent amplification reactions performed simultaneously in single reaction chamber.     

Rapid amplification of genomic DNA ends bynla III partial digestion and polynucleotide tailing

We report a simple and efficient method, which combines restriction endonuclease digestion and deoxynucleotide tailing, for cloning unknown genomic sequences adjacent to a known sequence. Total genomic DNA is partially digested with the frequent-cutting restriction enzymeNla III. A homo-oligomeric cytosine tail is added by terminal transferase. The tailed DNA fragments are used as the template for cloning flanking regions from all sequences of interest. A first round PCR amplification is performed with a gene-specific primer and the selective (modified polyguanine) anchor primer complementary to the cytosine tail and theNla III recognition site, with a universal amplification primer sequence at its 5′ end. This is followed by another PCR amplification with a nested gene-specific primer and the universal amplification primer. Finally, the amplified products are fractionated, cloned, and sequenced. Using this method, we cloned the upstream region of a salt-induced gene based upon a partial cDNA clone (RSC5-U) obtained from sunflower (Helianthus annuus L.).     

Diversity of streptomycetes in water-damaged building materials based on 16S rDNA sequences

AIMS: The diversity of streptomycetes in two different types of water-damaged building materials was investigated. METHODS AND RESULTS: Direct PCR amplification of 16S rDNA from DNA isolated from building materials, cloning of the fragments and sequence analysis were used. In the phylogenetic analysis of the variable gamma region of the PCR amplification products, the sequences affiliated with five groups. CONCLUSIONS: Several different sequences were found in both materials, suggesting the presence of several species. Also, previously unknown sequences were detected, although all the sequences clustered together with sequences of known species. SIGNIFICANCE AND IMPACT OF THE STUDY: Streptomycetes are known as indicators for moisture and mould damage in buildings and potential health risk, but their diversity in indoor environments is still unknown.     

High-efficiency thermal asymmetric interlaced PCR for amplification of unknown flanking sequences

Isolation of unknown DNA sequences flanked by known sequences is an important task in molecular biology research. Thermal asymmetric interlaced PCR (TAIL-PCR) is an effective method for this purpose. However the success rate of the original TAIL-PCR needs to be increased, and it is more desirable to obtain target products with larger sizes. Here we present a substantially improved TAIL-PCR procedure with special primer design and optimized thermal conditions. This high-efficiency TAIL-PCR (hiTAIL-PCR) combines the advantages of the TAIL-cycling and suppression-PCR, thus it can block the amplification of nontarget products and suppress small target ones, but allow efficient amplification of large target sequences. Using this method, we isolated genomic flanking sequences of T-DNA insertions from transgenic rice lines. In our tests, the success rates of the reactions were higher than 90%, and in most cases the obtained major products had sizes of 1-3 kb.