Cloning, nucleotide sequence, and expression of the chromate resistance determinant of Pseudomonas aeruginosa plasmid pUM505.

The chromate resistance determinant of Pseudomonas aeruginosa plasmid pUM505 was cloned into broad-host-range vector pSUP104. The hybrid plasmid containing an 11.1-kilobase insert conferred chromate resistance and reduced uptake of chromate in P. aeruginosa PAO1. Resistance to chromate was not expressed in Escherichia coli. Contiguous 1.6- and 6.3-kilobase HindIII fragments from this plasmid hybridized to pUM505 but not to P. aeruginosa chromosomal DNA and only weakly to chromate resistance plasmids pLHB1 and pMG6. Further subcloning produced a plasmid with an insert of 2,145 base pairs, which was sequenced. Analysis of deletions revealed that a single open reading frame was sufficient to determine chromate resistance. This open reading frame encodes a highly hydrophobic polypeptide, ChrA, of 416 amino acid residues that appeared to be expressed in E. coli under control of the T7 promoter. No significant homology was found between ChrA and proteins in the amino acid sequence libraries, but 29% amino acid identity was found with the ChrA amino acid sequence for another chromate resistance determinant sequenced in this laboratory from an Alcaligenes eutrophus plasmid (A. Nies, D. Nies, and S. Silver, submitted for publication).     

Nucleotide sequence of the chloramphenicol resistance determinant of the streptococcal plasmid pIP501

We have sequenced the chloramphenicol resistance determinant (cat) of plasmid pIP501 from Streptococcus agalactiae to investigate its relationship with other cognate cat determinants. Sequence analysis revealed that it exhibits a high degree of similarity with the cat genes of plasmids pC221 and pUB112 from Staphylococcus aureus and pSCS1 from Staphylococcus intermedius. These genes, however, display several differences in their regulatory and coding regions. These results demonstrate that the cat determinant of plasmid pIP501 belongs to the pC221 subgroup of CAT variants.     

Complete nucleotide sequence of a plant tumor-inducing Ti plasmid

Crown gall tumor disease in dicot plants is caused by Agrobacterium tumefaciens harboring a giant tumor-inducing (Ti) plasmid. Here, for the first time among agrobacterial plasmids, the nucleotide sequence of a typical nopaline-type Ti plasmid (pTi-SAKURA) was determined completely. In total, 195 open reading frames (ORFs) were estimated in the 206479 bp long sequence. 20 genes for conjugation, three for replication, 22 for pathogenesis and 37 for genetic colonization of host plants were found within two-thirds of the plasmid. These genes formed seven functional gene clusters with narrow inter-cluster spaces. In the remaining one-third of the plasmid, novel genes including homologs of mutT, Rhizobium nodQ and Sphingomonas ligE genes were found, which are likely to be responsible for the broad host range. Restriction fragment length variation indicates extreme plasticity of the part required for conjugational gene transfer and the above-mentioned one-third of the plasmid, even among closely related Ti plasmids.     

The complete nucleotide sequence of a small cryptic plasmid from Lactobacillus plantarum

The complete nucleotide sequence of a cryptic plasmid isolated from a Lactobacillus plantarum strain has been determined. The plasmid, designated pC30i1, has a molecular size of 2140 bp and a GC content of 37%. The sequence contains one major open reading frame (ORF R) of 951 bp, encoding a basic polypeptide of 317 amino acids, and a molecular weight of 36,956. ORF R shows extensive sequence similarity with genes coding for replication-associated proteins in a group of gram-positive plasmids known to replicate via single-stranded intermediates (ssDNA plasmids), and a stretch of 9 amino acids in the translation of ORF R closely matches a conserved region in these proteins, as well as the active site of the phi X174 Rep protein. Sequences similar to the ssDNA plasmid origins of replication are also present in the pC30i1 sequence, strengthening the hypothesis that pC30i1 belongs to the ssDNA plasmid family. The other main feature of the pC30i1 sequence is a noncoding region consisting of 14 direct, imperfect repeats of a 17-bp sequence, which may have an incompatibility function.     

The nucleotide sequence of the replication control region of the resistance plasmid R1drd-19

Summary The region of plasmid R1 containing the replication control genes has been sequenced using the Maxam-Gilbert method. The nucleotide sequence of two small PstI restriction fragments (a total of about 1,000 base pairs) was determined for the wildtype R1 plasmid as well as for two different copy mutants. It was found that one copy mutant has a single base substitution in the fragment which was recently shown to harbor an important inc/cop gene (Molin and Nordström 1980). Furthermore, the sequence indicates the presence of a structural gene that codes for a polypeptide of size 10,500 daltons. Possible gene products predicted from the nucleotide sequences and their role in replication control are discussed.     

The complete nucleotide sequence of the bacteriocinogenic plasmid CloDF13

The complete nucleotide sequence of the bacteriocinogenic plasmid CloDF13 has been determined. The plasmid consists of 9957 base pairs (molecular weight 6.64 X 10(6] with a GC content of 54.4%. At this moment 16 identified biological functions can be assigned to the primary structure of the CloDF13 DNA. The functions include those of eight protein encoding genes, two untranslated RNA species, and six DNA sites. We discuss these functions in relation to the structure of CloDF13 DNA. For convenience we have divided the CloDF13 genome into five defined regions: region I (origin of vegetative replication, priming and control of replication, type I incompatibility), region II (cloacin DF13, cloacin immunity, cloacin release, cloacin operon control), region III (double-stranded DNA-phage interaction, type II incompatibility, multimer resolution), region IV (inhibition of male specific RNA phages and transfer of Flac), and region V (mobility proteins, basis of mobility).     

Complete nucleotide sequence of plasmid Rts1: implications for evolution of large plasmid genomes

Rts1, a large conjugative plasmid originally isolated from Proteus vulgaris, is a prototype for the IncT plasmids and exhibits pleiotropic thermosensitive phenotypes. Here we report the complete nucleotide sequence of Rts1. The genome is 217,182 bp in length and contains 300 potential open reading frames (ORFs). Among these, the products of 141 ORFs, including 9 previously identified genes, displayed significant sequence similarity to known proteins. The set of genes responsible for the conjugation function of Rts1 has been identified. A broad array of genes related to diverse processes of DNA metabolism were also identified. Of particular interest was the presence of tus-like genes that could be involved in replication termination. Inspection of the overall genome organization revealed that the Rts1 genome is composed of four large modules, providing an example of modular evolution of plasmid genomes.     

The aacA-aphD gentamicin and kanamycin resistance determinant of Tn4001 from Staphylococcus aureus: expression and nucleotide sequence analysis

The aacA-aphD aminoglycoside resistance determinant of the Staphylococcus aureus transposon Tn4001, which specifies resistance to gentamicin, tobramycin and kanamycin, has been cloned and shown to express these resistances in Escherichia coli. The determinant encoded a single protein with an apparent size of 59 kDa which specified both aminoglycoside acetyltransferase [AAC(6')] and aminoglycoside phosphotransferase [APH(2")] activities. Nucleotide sequence analysis of the determinant showed it to be capable of encoding a 479-amino-acid protein of 56.9 kDa. analysis of Tn1725 insertion mutants of the determinant indicated that resistance to tobramycin and kanamycin is due to the AAC activity specified by, approximately, the first 170 amino acids of the predicted protein sequence and is consistent with the gentamicin resistance, specified by the APH activity, being encoded within the C-terminal region of the protein. Comparison of the C-terminal end of the predicted amino acid sequence with the reported sequences of 13 APHs and a viomycin phosphotransferase revealed a region which is highly conserved among these phosphotransferases.     

The nucleotide sequence of the rep gene of cyanobacterial plasmid pSM1

The nucleotide sequence was established for the rep gene of plasmid pSM1 isolated from cyanobacterium Plectonema boryanum CALU 465. Both nucleotide sequence and the encoded amino acid sequences showed 98% homology to the corresponding sequences of small plasmids pPF1, pGL3, pPBS1, pBLX, and pPB1. An active center was identified in the replicative protein sequences.     

The nucleotide sequence of the replication origin of plasmid NTP1.

The sequence of the DNA of the origin region of NTP1 has been obtained. Analysis of the sequence indicates that: (1) there is great sequence homology in the DNA upstream from the origin in NTP1, ColE1, CLODF13, PBR345 AND PBR322; (2) only seven base pairs of NTP1 are identical with the sequence downstream from the origin in ColE1, although some homology exists for 140 bases downstream; (3) two ten base pair direct repeats are present in NTP1 which are also conserved in all four plasmids named above; (4) probably no polypeptide greater than fifteen amino acids in length is encoded by the NTP1 origin region, since no single open reading frame is conserved in all five plasmids.     

The nucleotide sequence of Staphylococcus aureus plasmid pT48 conferring inducible macrolide-lincosamide-streptogramin B resistance and comparison with similar plasmids expressing constitutive resistance

The complete nucleotide sequence of a naturally occurring Staphylococcus aureus plasmid, pT48 (from S. aureus strain T48), has been determined. The 2475 bp plasmid confers inducible resistance to macrolide-lincosamide-streptogramin B (MLS) type antibiotics. It is similar to the constitutive MLS resistance plasmid, pNE131, from Staphylococcus epidermidis and shows homology with S. aureus plasmids pSN2 and pE194. It contains a palA structure homologous to that on S. aureus plasmid pT181. The open reading frame, ORF B, within the pSN2 homologous region has a frameshifted C-terminus, relative to pNE131, resulting in a smaller, 158 amino acid putative polypeptide. The pE194 homologous region has the ermC resistance determinant and retains the leader region, deleted in pNE131, required for inducible expression of an adenine methylase. Another naturally occurring S. aureus strain, J74, shows constitutive resistance to erythromycin and contains a small plasmid, pJ74, which is similar to pNE131 but with a different deletion in the leader sequence. The results are consistent with the translational attenuation model for ermC expression.     

Complete nucleotide sequence of pAL5000, a plasmid from Mycobacterium fortuitum

We have determined the complete nucleotide sequence of pAL5000, a plasmid from Mycobacterium fortuitum; the plasmid contains 4837 bp with 65% G + C. Five open reading frames (ORF1 to ORF5) have been identified. A number of sequences corresponding to palindromes, repeats, a helix-turn-helix motif, a signal sequence and repetitive amino acid motifs can be identified. This sequence should facilitate the construction of vectors based on pAL5000 for transfer and expression studies in mycobacteria.     

Analysis of the complete nucleotide sequence of an Actinobacillus pleuropneumoniae streptomycin-sulfonamide resistance plasmid, pMS260

pMS260 is an 8.1-kb non-conjugative but mobilizable plasmid that was isolated from Actinobacillus pleuropneumoniae and encodes streptomycin (SM) and sulfonamide (SA) resistances. The analysis of the complete nucleotide sequence of the plasmid revealed a high degree of similarity between pMS260 and the broad-host-range IncQ family plasmids. pMS260 had a single copy of an origin of vegetative replication (oriV). This sequence was identical to a functional oriV of the IncQ-like plasmid pIE1130 that had been exogenously isolated from piggery manure. However, pMS260 did not carry the second IncQ plasmid RSF1010-like oriV region present in pIE1130. A pIE1130-identical transfer origin was also found in pMS260. In addition, the deduced amino acid sequences from 10 open reading frames identified in pMS260 were entirely or nearly identical to those from genes for the replication, mobilization, and SM-SA resistance of pIE1130, indicating that pMS260 belongs to the IncQ-1 gamma subgroup. pMS260 is physically indistinguishable from pIE1130 apart from two DNA regions that contain the chloramphenicol and kanamycin resistance genes (catIII and aphI, respectively) and the second oriV-like region of pIE1130. The codon bias analysis of each gene of pIE1130 and the presence of potential recombination sites in the sulII-strA intergenic regions suggest that pIE1130 seems to have acquired the catIII and aphI genes more recently than the other genes of pIE1130. Therefore, pMS260 may be the ancestor of pIE1130. Information regarding the broad-host-range replicon of pMS260 will be useful in the development of genetic systems for a wide range of bacteria including A. pleuropneumoniae.     

The nucleotide sequence of a small cryptic plasmid found in Staphylococcus aureus and its relationship to other plasmids

The nucleotide sequence of a small (1273 bp) plasmid (pOX1000) of Staphylococcus aureus has been determined and compared with similar plasmids. The sequence includes a single open reading frame; two large palindromes and a 22 bp palindrome that is contiguously repeated three times upstream of the open reading frame. Composite plasmids of pE194ts and pOX1000 were constructed with pUC18 separately inserted into five different sites on pOX1000 and used to analyse the replication functions of the cryptic plasmid.     

Nucleotide sequence of the kanamycin resistance determinant of plasmid RP4: Homology to other aminoglycoside 3′-phosphotransferases

The kanamycin resistance determinant of the broad-host-range plasmid RP4 encodes an aminoglycoside 3'-phosphotransferase of type I. The nucleotide sequence of the kanamycin resistance gene (Kmr) and the right end of the insertion element IS8 of plasmid RP4 has been determined. The gene (816 bp) is located between IS8 and the region (Tra 1) encoding plasmid factors mediating bacterial conjugation. Kmr and Tra 1 are transcribed toward each other. The nucleotide sequence has been compared to five related aphA genes originating from gram-negative and gram-positive organisms and from antibiotic producers. Among these that of Tn903 shares the highest degree of similarity (60%) with the RP4 gene. Significant similarities were also detected between the amino acid sequences of the six enzymes. The C-terminal domains of six different aminoglycoside 3'-phosphotransferases (APH(3'] are highly conserved. They are substantially similar to segments of a variety of enzymes using ATP as cofactor. The role of the C-terminal sequences of APH(3') as potential domains for ATP recognition and binding is discussed.