Catalytic performance and thermostability of chloroperoxidase in reverse micelle: achievement of a catalytically favorable enzyme conformation

The catalytic performance of chloroperoxidase (CPO) in peroxidation of 2, 2′-azinobis-(-3 ethylbenzothiazoline-6-sulfononic acid) diammonium salt (ABTS) and oxidation of indole in a reverse micelle composed of surfactant-water-isooctane-pentanol was investigated and optimized in this work. Some positive results were obtained as follows: the peroxidation activity of CPO was enhanced 248% and 263%, while oxidation activity was enhanced 215% and 222% in cetyltrimethylammonium bromide (CTABr) reverse micelle medium and dodecyltrimethylammonium bromide (DTABr) medium, respectively. Thermostability was also greatly improved in reverse micelle: at 40°C, CPO essentially lost all its activity after 5 h incubation, while 58–76% catalytic activity was retained for both reactions in the two reverse micelle media. At 50°C, about 44–75% catalytic activity remained for both reactions in reverse micelle after 2 h compared with no observed activity in pure buffer under the same conditions. The enhancement of CPO activity was dependent mainly on the surfactant concentration and structure, organic solvent ratio (V _pentanol/V _isooctane), and water content in the reverse micelle. The obtained kinetic parameters showed that the catalytic turnover frequency (k _cat) was increased in reverse micelle. Moreover, the lower K _m and higher k _cat/K _m demonstrated that both the affinity and specificity of CPO to substrates were improved in reverse micelle media. Fluorescence, circular dichroism (CD) and UV–vis spectra assays indicated that a catalytically favorable conformation of enzyme was achieved in reverse micelle, including the strengthening of the protein α-helix structure, and greater exposure of the heme prosthetic group for easy access of the substrate in bulk solution. These results are promising in view of the industrial applications of this versatile biological catalyst.     

Characterization of a thermostable lipase showing loss of secondary structure at ambient temperature

A gene encoding extracellular lipase was cloned and characterized from metagenomic DNA extracted from hot spring soil. The recombinant gene was expressed in E. coli and expressed protein was purified to homogeneity using hydrophobic interactions chromatography. The mature polypeptide consists of 388 amino acids with apparent molecular weight of 43 kDa. The enzyme displayed maximum activity at 50°C and pH 9.0. It showed thermal stability up to 40°C without any loss of enzyme activity. Nearly 80% enzyme activity was retained at 50°C even after incubation for 75 min. However above 50°C the enzyme displayed thermal instability. The half life of the enzyme was determined to be 5 min at 60°C. Interestingly the CD spectroscopic study carried out in the temperature range of 25–95°C revealed distortion in solution structure above 35°C. However the intrinsic tryptophan fluorescence spectroscopic study revealed that even with the loss of secondary structure at 35°C and above the tertiary structure was retained. With p-nitrophenyl laurate as a substrate, the enzyme exhibited a K _m , V _max and K _cat of 0.73 ± 0.18 μM, 239 ± 16 μmol/ml/min and 569 s⁻¹ respectively. Enzyme activity was strongly inhibited by CuCl₂, HgCl₂ and DEPC but not by PMSF, eserine and SDS. The protein retained significant activity (~70%) with Triton X-100. The enzyme displayed 100% activity in presence of 30% n-Hexane and acetone.     

Purification, immobilization and characterization of linoleic acid isomerase on modified palygorskite

Linoleic acid isomerase from Lactobacillus delbrueckii subsp. bulgaricus 1.1480 was purified by DEAE ion-exchange chromatography and gel filtration chromatography. An overall 5.1% yield and purification of 93-fold were obtained. The molecular weight of the purified protein was ~41 kDa which was analyzed by SDS-PAGE. The purified enzyme was immobilized on palygorskite modified with 3-aminopropyltriethoxysilane. The immobilized enzyme showed an activity of 82 U/g. The optimal temperature and pH for the activity of the free enzyme were 30 °C and pH 6.5, respectively; whereas those for the immobilized enzyme were 35 °C and pH 7.0, respectively. The immobilized enzyme was more stable than the free enzyme at 30–60 °C, and the operational stability result showed that more than 85% of its initial activity was retained after incubation for 3 h. The K _m and V _max values of the immobilized enzyme were found to be 0.0619 mmol l⁻¹ and 0.147 mmol h⁻¹ mg⁻¹, respectively. The immobilized enzyme had high operational stability and retained high enzymatic activity after seven cycles of reuse at 37 °C.     

Reversible immobilization of uricase on conductive polyaniline brushes grafted on polyacrylonitrile film

Polyacrylonitrile film (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The conductive films were used for immobilization of uricase. The surface resistance of the conductive film in this work was found to be 0.97 kΩ/cm. The maximum amount of immobilized enzyme on conductive film containing 2.4% PANI was about 216 μg/cm². The optimum pH for free and immobilized enzymes was observed at 7.0 and 7.5, respectively. The K _m values for free and immobilized uricase were found to be 94 and 138 μM, respectively. V _max values were calculated as 1.87 and 1.63 U/mg protein for the free and immobilized enzymes, respectively. Immobilized uricase exhibited ~68% of its original activity even after 2 months of storage at 4 °C while the free enzyme lost its initial activity within 4 weeks.     

Purification and characterization of a highly selective sucrose isomerase from Erwinia rhapontici NX-5

A highly selective sucrose isomerase (SIase) was purified to homogeneity from the cell-free extract of Erwinia rhapontici NX-5 with a recovery of 27.7% and a fold purification of 213.6. The purified SIase showed a high specific activity of 427.1 U mg⁻¹ with molecular weight of 65.6 kDa. The K _m for sucrose was 222 mM while V _max was 546 U mg⁻¹. The optimum pH and temperature for SIase activity were 6.0 and 30 °C, respectively. The purified SIase was stable in the temperature range of 10–40 °C and retained 65% of the enzyme activity after 2 weeks’ storage at 30 °C. The SIase activity was enhanced by Mg²⁺ and Mn²⁺, inhibited by Ca²⁺, Cu²⁺, Zn²⁺, and Co²⁺, completely inhibited by Hg²⁺ and Ag²⁺. The purified SIase was strongly inhibited by SDS, while partially inhibited by dimethylformamide, tetrahydrofuran, and PMSF. Additionally, glucose and fructose acted as competitive inhibitors for purified SIase.     

Cloning and characterization of a thermostable and halo-tolerant endoglucanase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis> MB4

A β-1,4-endoglucanase (Cel5A) was cloned from the genomic DNA of saccharolytic thermophilic eubacterium Thermoanaerobacter tengcongensis MB4 and functionally expressed in Escherichia coli. Substrate specificity analysis revealed that Cel5A cleaves specifically the β-1,4-glycosidic linkage in cellulose with high activity (294 U mg⁻¹; carboxymethyl cellulose sodium (CMC)). On CMC, kinetics of Cel5A was determined (K _m 1.39 ± 0.12 g l⁻¹; k _cat/K _m 1.41 ± 0.13 g⁻¹ s⁻¹). Cel5A displays an activity optimum between 75 and 80 °C. Residues Glu187 and Glu289 were identified as key catalytic amino acids by sequence alignment. Interestingly, derived from a non-halophilic bacterium, Cel5A exhibits high residual activities in molar concentration of NaCl (3 M, 49.3%) and KCl (4 M, 48.6%). In 1 M NaCl, 82% of Cel5A activity is retained after 24 h incubation. Molecular Dynamics studies performed at 0 and 3 M NaCl, correlate the Cel5A stability to the formation of R-COO⁻···Na⁺ ···⁻OOC-R salt bridges within the Cel5A tertiary structure, while activity possibly relates to the number of Na⁺ ions trapped into the negatively charged active site, involving a competition mechanism between substrate and Na⁺. Additionally, Cel5A is remarkably resistant in ionic liquids 1-butyl-3-methyllimidazolium chloride (1 M, 54.4%) and 1-allyl-3-methylimidazolium chloride (1 M, 65.1%) which are promising solvents for cellulose degradation and making Cel5A an attractive candidate for industrial applications.     

Biotransformation of Acetamide to Acetohydroxamic Acid at Bench Scale Using Acyl Transferase Activity of Amidase of <Emphasis Type="Italic">Geobacillus pallidus</Emphasis> BTP-5x MTCC 9225

The bioprocess employing acyl transferase activity of intracellular amidase of Geobacillus pallidus BTP-5x MTCC 9225 was harnessed for the synthesis of pharmaceutically important acetohydroxamic acid. G. pallidus BTP-5x exhibited highest acyl transferase activity with acetamide: hydroxylamine in ratio of 1:5 in 0.1 M NaH₂PO₄/Na₂HPO₄ buffer (pH 7.5) at 65°C. In one liter fed-batch reaction containing 1:5 ratio of two substrates total of eight feedings of 0.05 M/20 min of acetamide were made and it was found that maximum acetohydroxamic production was achieved at 3:5 ratios of substrate and cosubstrate. In 1 l bench scale batch reaction containing 0.3 M acetamide, 0.5 M hydroxylamine in 0.1 M NaH₂PO₄/Na₂HPO₄ buffer (pH 7.5, 50°C, 400 rpm) and 0.5 mg/ml (dry cell weight) of whole cells of G. pallidus BTP-5x (as biocatalyst) resulted in an yield of 0.28 M of acetohydroxamic acid after 20 min reaction time at 50°C. The acetamide bioconversion rate was 90–95% (mol mol⁻¹) and 51 g powder containing 40% (w/w) acetohydroxamic acid was recovered after lyophilization.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Molecular characterization of phenylalanine ammonia lyase gene from <Emphasis Type="Italic">Cistanche deserticola</Emphasis>

We cloned the gene, CdPAL1, from Cistanche deserticola callus using RACE PCR with degenerate primers that were designed based on a multiple sequence alignment of known PAL genes from other plant species. The gene shows high homology to other known PAL genes registered in GenBank. The recombinant protein exhibited Michaelis–Menten kinetics with a K _m of 0.1013 mM, V _max of 4.858 μmol min⁻¹, K _cat of 3.36 S⁻¹, and K _cat/K _m is 33,168 M⁻¹ S⁻¹. The enzyme had an optimal pH of 8.5 and an activation energy of 38.92 kJ mol⁻¹ when l-Phenylalanine was used as a substrate; l-tyrosine cannot be used as substrate for this protein. The optimal temperature was 55°C, and the thermal stability results showed that, after a treatment at 70°C for 20 min, the protein retained 87% activity, while a treatment at 75°C for 20 min resulted in a loss of over 85% of the enzyme activity. Treatment with heavy metal ions (Hg²⁺, Pb²⁺, and Zn²⁺) showed remarkable inhibitory effects. Among the intermediates from the lignin (cinnamyl alcohol, cinnamyl aldehyde, coniferyl aldehyde, coniferyl alcohol), phenylpropanoid (cinnamic acid, coumaric acid, caffeic acid, and chlorogenic acid) and phenylethanoid (tyrosol and salidroside) biosynthetic pathways, only cinnamic acid showed strong inhibitory effects against CdPAL1 activity with a K _i of 8 μM. Competitive inhibitor AIP exhibited potent inhibition with K _i = 0.056 μM.     

Xylanase II from <Emphasis Type="Italic">Trichoderma reesei</Emphasis> QM 9414: conformational and catalytic stability to Chaotropes,Trifluoroethanol, and pH changes

Xylanase II, a key enzyme in the hydrolysis of xylan, was purified from cultures of Trichoderma reesei QM 9414 (anamorph of Hypocrea jecorina) grown on wheat straw as a carbon source. Xylanase treated with increasing guanidinium hydrochloride concentrations was denatured in a cooperative way regarding secondary and tertiary structures with midpoint transitions 5.6 ± 0.1 and 3.7 ± 0.1 M, respectively, whereas the enzymatic activity showed an intermediate state at 2–4 M denaturant. Treatment with urea showed that xylanase secondary structure was stabilized up to 4 M urea to be destabilized thereafter in a cooperative way with a transition midpoint Dm = 5.7 ± 0.2 M, but the ellipticity at 220 nm was greater than control in the presence of urea up to 6 M. Tertiary structure in the presence of urea showed also intermediate states with partial cooperative transitions with a midpoint: Dm = 2.7 ± 0.04 and 6.7 ± 0.3 M, respectively, whereas the enzymatic activity was enhanced about 40% at 2 M and inhibited above 4 M urea. Assays with the fluorescent probe 4,4′-bis-1-phenylamine-8-naphftalene sulfonate (bis-ANS) proved that the intermediate states had the characteristics of molten globule structures. The change of free energy for xylanase in absence of denaturants obtained from the spectral centre of mass (SCM) data at 298 K is \Updelta G_{H2 O}⁰ \Updelta G_{{{\rm H}_{2} {\rm O}}}^{0}  = ~17 kJ mol⁻¹. In the presence of increasing trifluoroethanol (TFE), the enzyme gained α-helix content and lose tertiary structure and catalytic activity. Changes in pH (2–9) had practically no effect on the secondary structure of the enzyme, whereas the SCM values indicated that tertiary structure is maintained above pH 4. Bis-ANS binds to xylanase at pH 2 and 2.5 and in the presence of 30–40% TFE (v/v) characterizing molten globule states in those environmental conditions.     

Production,purification and characterization of a thermostable laccase from a tropical white-rot fungus

A thermostable laccase was isolated from a tropical white-rot fungus Polyporus sp. which produced as high as 69,738 units of laccase l⁻¹ in an optimized medium containing 20 g of malt extract l⁻¹, 2 g of yeast extract l⁻¹, 1.5 mM CuSO₄. The laccase was purified to electrophoretic purity with a final purification of 44.70-fold and a recovery yield of 21.04%. The purified laccase was shown to be a monomeric enzyme with a molecular mass of 60 kDa. The optimum temperature and pH value of the laccase were 75°C and pH 4.0, respectively, for 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS). The Michaelis–Menten constant (K _m ) of the laccase was 18 μM for ABTS substrate. The laccase was stable at pH values between 5.5 and 7.5. About 80% of the initial enzyme activity was retained after incubation of the laccase at 70°C for 2 h, indicating that the laccase was intrinsically highly thermostable and with valuable potential applications. The laccase activity was promoted by 4.0 mM of Mg²⁺, Mn²⁺, Zn²⁺ and Ca²⁺, while inhibited by 4.0 mM of Co²⁺, Al³⁺, Cu²⁺, and Fe²⁺, showing different profiles of metal ion effects.     

A cold-adapted esterase of a novel marine isolate, Pseudoalteromonas arctica: gene cloning, enzyme purification and characterization

A gene encoding an esterase (estO) was identified and sequenced from a gene library screen of the psychrotolerant bacterium Pseudoalteromonas arctica. Analysis of the 1,203 bp coding region revealed that the deduced peptide sequence is composed of 400 amino acids with a predicted molecular mass of 44.1 kDa. EstO contains a N-terminal esterase domain and an additional OsmC domain at the C-terminus (osmotically induced family of proteins). The highly conserved five-residue motif typical for all α/β hydrolases (G × S × G) was detected from position 104 to 108 together with a putative catalytic triad consisting of Ser¹⁰⁶, Asp¹⁹⁶, and His²²⁵. Sequence comparison showed that EstO exhibits 90% amino acid identity with hypothetical proteins containing similar esterase and OsmC domains but only around 10% identity to the amino acid sequences of known esterases. EstO variants with and without the OsmC domain were produced and purified as His-tag fusion proteins in E. coli. EstO displayed an optimum pH of 7.5 and optimum temperature of 25°C with more than 50% retained activity at the freezing point of water. The thermostability of EstO (50% activity after 5 h at 40°C) dramatically increased in the truncated variant (50% activity after 2.5 h at 90°C). Furthermore, the esterase displays broad substrate specificity for esters of short-chain fatty acids (C₂–C₈).     

Immobilization of Candida rugosa lipase on poly(3-hydroxybutyrate-co-hydroxyvalerate): a new eco-friendly support

The overall objective of this study is to evaluate the morphological [scanning electron microscopy (SEM)], physicochemical [differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), chemical composition analysis, Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR)], and biochemical properties of Candida rugosa lipase (CRL) immobilized on a natural biopolymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. CRL was immobilized by physical adsorption with efficiency of 30%. Compared with free CRL enzyme, there were slight changes in immobilized CRL activity as a function of temperature (from 37°C to 45°C), but a similar optimal pH value of 7.0. Inactivation rate constants for immobilized CRL enzyme were 0.009 and 0.334 h⁻¹, and half-lives were 77 and 2 h at 40°C and 60°C, respectively. Kinetic parameters obtained for immobilized CRL include the Michaelis–Menten constant of K _m = 213.18 mM and maximum reaction velocity of V _max = 318.62 U/g. The operational stability of immobilized CRL was tested repeatedly, and after 12 cycles of reuse, the enzyme retained 50% activity. Based on our results, we propose that PHBV-immobilized CRL could serve as a promising biocatalyst in several industrial applications.     

High-efficiency vitrification protocols for cryopreservation of in vitro grown shoot tips of rare and endangered plant <Emphasis Type="Italic">Emmenopterys henryi</Emphasis> Oliv.

In vitro-grown shoot tips of Emmenopterys henryi Oliv. were successfully cryopreserved by vitrification. Shoot tips excised from 3-month old plantlets were precultured in a liquid hormone-free Murashige and Skoog (MS) medium supplemented with 0.5 M sucrose for 3 days at 25°C and then treated with a mixture of 2 M glycerol plus 0.4 M sucrose (LS solution) for 40 min at 25°C. Osmo-protected shoot tips were first dehydrated with 60% vitrification solution (PVS₂) for 30 min at 0°C and followed by 100% PVS₂ for 40 min at 0°C. After changing the solution with fresh 100% PVS₂, the shoot tips were directly plunged into liquid nitrogen. After rapid warming in a water-bath at 40°C for 2 min, the shoot tips were washed for 20 min at 25°C with liquid MS medium containing 1.2 M sucrose and then transferred onto solid MS medium supplemented with kinetin 2 mg l⁻¹, α-naphthaleneacetic acid 0.1 mg l⁻¹, 3% (w/v) sucrose and 0.75% (w/v) agar. The shoot tips were kept in the dark for 7 days prior to exposure to the light (12 h photoperiod cycle). Direct shoot elongation was observed in approximately 12 days. The regeneration rate was approximately 75–85%. This method appears to be a promising technique for cryopreserving shoot tips of Emmenopterys henryi Oliv. germplasm.     

Encapsulation of <Emphasis Type="Italic">Pannonibacter phragmitetus</Emphasis> LSSE-09 in alginate–carboxymethyl cellulose capsules for reduction of hexavalent chromium under alkaline conditions

Cr(VI) was efficiently reduced to Cr(III) by Pannonibacter phragmitetus LSSE-09 encapsulated in liquid-core alginate–carboxymethyl cellulose capsules under alkaline conditions. Taking into account the physical properties of the capsules, the activity of encapsulated cells, and total Cr(III) concentration in the supernatant, optimal conditions (0.5% w/v sodium alginate; 2% w/v sodium carboxymethyl cellulose; 0.1 M CaCl₂; 30-min gelation time) for LSSE-09 encapsulation were determined. At optimal conditions, a relatively high reduction rate of 4.20 mg g_{(dry weight)}⁻¹  min⁻¹ was obtained. Total Cr(III) concentration in the supernatant was significantly decreased after reduction, because 63.7% of the formed soluble organo-Cr(III) compounds compared with those of free cells were captured by the relatively smaller porous structure of alginate capsules. The optimal pH value (9.0) for Cr(VI) reduction was not changed after encapsulation. In addition, encapsulated LSSE-09 showed no appreciable loss in activity after eight repeated cycles at 37°C, and 85.7% of its initial activity remained after 35-day storage at 4°C. The results suggest that encapsulated LSSE-09 in alginate–carboxymethyl cellulose capsules has potential biotechnological applications for the detoxification of Cr(VI)-contaminated wastewater.     

Covalent immobilization of β-1,4-glucosidase from <Emphasis Type="Italic">Agaricus arvensis</Emphasis> onto functionalized silicon oxide nanoparticles

An efficient β-1,4-glucosidase (BGL) secreting strain, Agaricus arvensis, was isolated and identified. The relative molecular weight of the purified A. arvensis BGL was 98 kDa, as determined by sodium dodecylsulfate polyacrylamide gel electrophoresis, or 780 kDa by size exclusion chromatography, indicating that the enzyme is an octamer. Using a crude enzyme preparation, A. arvensis BGL was covalently immobilized onto functionalized silicon oxide nanoparticles with an immobilization efficiency of 158%. The apparent V _max (k _cat) values of free and immobilized BGL under standard assay conditions were 3,028 U mg protein⁻¹ (4,945 s⁻¹) and 3,347 U mg protein⁻¹ (5,466 s⁻¹), respectively. The immobilized BGL showed a higher optimum temperature and improved thermostability as compared to the free enzyme. The half-life at 65 °C showed a 288-fold improvement over the free BGL. After 25 cycles, the immobilized enzyme still retained 95% of the original activity, thus demonstrating its prospects for commercial applications. High specific activity, high immobilization efficiency, improved stability, and reusability of A. arvensis BGL make this enzyme of potential interest in a number of industrial applications.     

An L-arabinose isomerase from Acidothermus cellulolytics ATCC 43068: cloning, expression, purification, and characterization

The araA gene encoding an L-arabinose isomerase (L-AI) from the acido-thermophilic bacterium Acidothermus cellulolytics ATCC 43068 was cloned and overexpressed in Escherichia coli. The open reading frame of the L-AI consisted of 1,503 nucleotides encoding 501 amino acid residues. The recombinant L-AI was purified to homogeneity by heat treatment, ion-exchange chromatography, and gel filtration. The molecular mass of the enzyme was estimated to be approximately 55 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified enzyme was optimally active at 75°C and pH 7.5. It required divalent metal ions, either Mn²⁺ or Co²⁺, for both enzymatic activity and thermostability improvement at higher temperatures. The enzyme showed relatively high activity and stability at acidic pH. It exhibited over 90% of its maximal activity at pH 6.0 and retained 80% of activity after 12 h incubation at pH 6.0. Catalytic property study showed that the enzyme had an interesting catalytic efficiency. Its apparent K _m, V _max, and catalytic efficiency (k _cat/K _m) for D-galactose was 28.9 mM, 4.9 U/mg, and 9.3 mM⁻¹ min⁻¹, respectively. The enzyme carried out the isomerization of D-galactose to D-tagatose with a conversion yield over 50% after 12 h under optimal conditions, suggesting its potential in D-tagatose production.     

Characterization of an extracellular alkaline serine protease from marine <Emphasis Type="Italic">Engyodontium album</Emphasis> BTMFS10

An alkaline protease from marine Engyodontium album was characterized for its physicochemical properties towards evaluation of its suitability for potential industrial applications. Molecular mass of the enzyme by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) analysis was calculated as 28.6 kDa. Isoelectric focusing yielded pI of 3–4. Enzyme inhibition by phenylmethylsulfonyl fluoride (PMSF) and aprotinin confirmed the serine protease nature of the enzyme. K _m, V _max, and K _cat of the enzyme were 4.727 × 10⁻² mg/ml, 394.68 U, and 4.2175 × 10⁻² s⁻¹, respectively. Enzyme was noted to be active over a broad range of pH (6–12) and temperature (15–65°C), with maximum activity at pH 11 and 60°C. CaCl₂ (1 mM), starch (1%), and sucrose (1%) imparted thermal stability at 65°C. Hg²⁺, Cu²⁺, Fe³⁺, Zn²⁺, Cd⁺, and Al³⁺ inhibited enzyme activity, while 1 mM Co²⁺ enhanced enzyme activity. Reducing agents enhanced enzyme activity at lower concentrations. The enzyme showed considerable storage stability, and retained its activity in the presence of hydrocarbons, natural oils, surfactants, and most of the organic solvents tested. Results indicate that the marine protease holds potential for use in the detergent industry and for varied applications.     

Purification and characterization of the exopolygalacturonase produced by Aspergillus giganteus in submerged cultures

Polygalacturonases are pectinolytic enzymes that catalyze the hydrolysis of the plant cell-wall pectin backbone. They are widely used in the food industry for juice extraction and clarification. Aspergillus giganteus produces one polygalacturonase (PG) on liquid Vogel medium with citrus pectin as the only carbon source. In specific applications, such as those used in the food and medicine industries, the PG must be free of substances that could affect the characteristics of the product and the process, such as color, flavor, toxicity, and inhibitors. We present here an efficient, simple, and inexpensive method for purifying the A. giganteus PG and describe the characteristics of the purified enzyme. Purified PG was obtained after two simple steps: (1) protein precipitation with 70% ammonium sulfate saturation and (2) anion-exchange chromatography on a DEAE-Sephadex A-50 column. The final enzyme solution retained 86.4% of its initial PG activity. The purified PG had a molecular weight of 69.7 kDa, exhibited maximal activity at pH 6.0 and 55–60°C, and was stable in neutral and alkaline media. It had a half-life of 115, 18, and 6 min at 40, 50 and 55°C, respectively. Purified PG showed its highest hydrolytic activity with low-esterified and nonesterified substrates, releasing monogalacturonic acid from substrate, indicating that it is an exopolygalacturonase. PG activity was enhanced in the presence of β-mercaptoethanol, dithiothreitol, Co²⁺, Mn²⁺, Mg²⁺, NH₄ ⁺, and Na⁺ and was resistant to inhibition by Pb²⁺.     

Effects of sodium nitroprusside on callus induction and shoot regeneration in micropropagated Dioscorea opposita

The effects of sodium nitroprusside (SNP) on callus induction and shoot regeneration of Dioscorea opposite Thunb. have been studied. Application of 40 μM of SNP depresses accumulation of H₂O₂ in tuber explants of Dioscorea opposita markedly. Supplementation of 40 μM of SNP to the Murashige and Skoog medium with combinations of benzylaminopurine (3 mg dm⁻³) and naphthaleneacetic acid (0.5 mg dm⁻³) reduces the browning of explants and increases the frequency of callus induction from tuber explants significantly. The regeneration frequency of adventitious shoot shows a significant increase in the presence of SNP. Further analysis indicates that treatment with 40 μM of SNP results in significant decreases in catalase and peroxidase activity, while increasing the activity of superoxide dismutase. Supplementation with 40 μM of SNP also promotes the accumulation of non-enzymic antioxidants, including proline and glutathione. The effects on callus induction and shoot regeneration promoted by SNP were reversed by the nitric oxide (NO) scavenger 2-(4-carboxyphenyl)- 4,4,5,5- tetramethylimidazoline-1-oxyl-3-oxide. These results indicate that the exogenously applied NO-donor SNP alleviates browning of tuber explants by reducing H₂O₂ accumulation, thereby promoting a higher in vitro proliferation frequency of D. opposita.