Producing a P1 bacteriophage library from pine: isolation and cloning of very high molecular weight DNA.

We have generated a genomic P1 bacteriophage library using Monterey pine (Pinus radiata) DNA. We first developed a method for isolating from pine tissue the very high molecular weight DNA necessary for the preparation of libraries requiring large inserts. The method involves protoplasting the cells, isolating nuclei and lysis in a high concentration of detergent. Fragments of greater than two megabases in size are produced in solution. Modifications introduced to the protocol for library preparation and for P1 plasmid isolation are described.     

Partition of nonreplicating DNA by the par system of bacteriophage P1.

P1 plasmid encodes a cis-acting centromere analog, parS, and two Par proteins that together stabilize plasmids by partitioning them to daughter bacteria. We infected immune bacteria with bacteriophage lambda into which parS had been inserted. The presence of P1 Par proteins in the infected cells was found to delay the appearance of cells cured of the nonreplicating, extrachromosomal lambda-parS DNA. This stabilization of lambda-parS, approximated in a computer simulation, demonstrates that active partition by the P1 par system does not require the act of plasmid replication and can be studied in its absence.     

Preparative scale, high resolution purification of low molecular weight DNA fragments

A commercially available continuous electroelution system has been used to separate and purify low molecular weight DNA fragments from polyacrylamide gels. This method has several advantages over previously reported methods for the recovery of DNA fragments from polyacrylamide gels. This technique, which gives very high recovery rates (80-95%), can be carried out on a relatively large scale and in a way that is not labour intensive. Data are presented for the purification of DNA fragments with molecular weights in the range 1-4 x 10(5) (200-700 base-pairs), although the method is also applicable to larger molecular weight DNA fragments, RNAs and proteins.     

Cloning of restriction fragments of DNA from staphylococcal bacteriophage phi 11.

EcoRI fragments of Staphylococcus aureus bacteriophage phi 11 DNA were cloned in vector plasmid pSA2100 in S. aureus. The clones were analyzed in marker rescue experiments with suppressor- and temperature-sensitive mutants of phi 11 to correlate the genetic and physical map. Several mutants could be identified on the physical map, and a clone containing fragment EcoRI-B of phi 11 DNA expressed immunity to phage infection. In addition, it was found that recombinant plasmids containing phi 11 DNA sequences can be transferred by high-frequency transduction after phage phi 11 infection of host cells.     

Fluorescent labeling of fragments of high molecular weight RNA.

We describe a method to fluorescently label microgram quantities of high molecularweight RNA with acriflavine. The method involves hydrolyzing the RNA with HCl at pH 1.0 for 10 min to obtain segments of about 80 nucleotides. The 3′-terminal phosphate is removed from the ribose with alkaline phosphatase, and the terminal ribose is oxidized with periodate to form dialdehydes. Acriflavine is bound to the dialdehyde by the formation of a Schiff's base, and unbound acriflavine is removed by dialysis followed by chromatography on a Sephadex G-25 column eluted with phosphate buffered guanidine-HCl. Human 18 S rRNA bound 0.94 acriflavine molecules per 100 nucleotides and had a fluorescence excitation maximum at 460 nm and an emission maximum at 508 nm. If the hydrolysis step was omitted, this RNA bound only 0.12 acriflavine molecule per 100 nucleotides. Acriflavine-labeled high molecular weight yeast RNA showed a fluorescent intensity which was proportional to RNA concentration to a 1000-fold dilution.     

Cloning of bacteriophage T5 DNA fragments in plasmid pBR322 and bacteriophage lambda gtWES

Bacteriophage T5 was digested with the restriction endonucleases HindIII and EcoRI and the resulting fragments were inserted into the plasmid pBR322 and the bacteriophage lambda gtWES as vectors. Approx. 15% of the phage genome was recovered in recombinant clones. The recombinants were characterized by restriction analysis, DNA/DNA hybridization employing Southern blots, and ability to complement or recombine with amber mutants of T5. The results obtained allow revisions of the physical map of the T5 genome and partial correlation of the physical map with the genetic map.     

A high molecular weight lipopolysaccharide specific bacteriophage for Klebsiella pneumoniae

High-molecular weight lipopolysaccharide (O antigen enriched fraction) from Klebsiella pneumoniae was determined to be the receptor for bacteriophage FC3-1. A methodology for the identification of the lipopolysaccharide component involved in FC3-1 bacteriophage reception was used that is suitable for other phages and host bacteria.     

Cloning fragments of bacteriophage T5 DNA, determining expression of phage-dependent ligase

Cloning vèctor lambda gt-p MB9 has been used for cloning of DNA fragments of bacteriophage T5 produced by EcoR*I activity. One clone contains a DNA fragment of 2.2 Md which has been mapped at 67-71% on the physical map of the genome. Functional studies have shown that bacteriophage lambda gt-T5 can grow on E. coli lights 7. Infection of this E.coli strain with phage lambda gt-T5 induces DNA-ligase activity which has been previously observed in E. Coli infected with bacteriophage T5.     

Transient electric birefringence of two small DNA restriction fragments of the same molecular weight.

The transient electric birefringence of two small DNA restriction fragments of the same molecular weight, one of which migrates anomalously slowly on polyacrylamide gels, has been investigated. Both fragments exhibit negative birefringence. The decay of the birefringence of the anomalously slowly migrating fragment is 8-9% faster than that of the normally migrating fragment. The faster birefringence decay of the anomalous fragment 12A persists under a variety of buffer conditions, suggesting that it is due primarily to static bending and/or curvature of fragment 12A. In reversing electric fields the absolute amplitude of the birefringence of fragments 12A and 12B decreased about 26% before returning to the steady state value. The minimum in the birefringence occurred faster than expected from the birefringence decay times and decreased with increasing electric field strength, suggesting that the minimum is due to a slow polarization of the ion atmosphere. For both fragments, the rise of the birefringence in the Kerr region is about 10% slower than the field-free decay. The buildup of the negative birefringence is preceded either by an interval when no birefringence is observed or by a small positively birefringent transient, suggesting that a small transverse ionic polarizability is also present. Both DNA fragments exhibit Kerr law behavior over most of the range of electric field strengths investigated. Analysis of the shapes of the saturation curves suggests that differences may exist in the polarization mechanisms of the two fragments.     

Cloning of the DNA BglII fragments of bacteriophage T4 in the vector plasmid pSCC31

An attempt has been made to clone six BglII fragments of T4 DNA in the range of 3.3-8.1 kb in the vector plasmid pSCC31 containing a single BglII site within the gene for endonuclease EcoRI and pL promoter of phage lambda. DNA fragments were extracted from the corresponding bands of agarose gel. The following BglII fragments were cloned: the 3.3 kb fragment No. 9 containing a portion of gene 20, the gene 21 and a portion of gene 22; the 4.2 kb fragment No. 8.1 with genes 17, 18, 19 and a portion of gene 20; the 5.2 kb fragment No. 7.1 with genes 25-29 and a portion of gene 48. In the case of the fragment No. 7.1, the recombinant plasmids pRL705 and pRL707 with different orientation of phage DNA fragment were obtained. An attempt to clone the fragments No. 8.2 (4.2 kb), No. 7.2 (5.45 kb) and No. 6 (8.1 kb) was unsuccessful and this probably indicates the presence of the genes, whose products are deleterious to the growth of bacterial cell.     

Unstable high molecular weight inverted repetitive DNA in human lymphocytes.

About 1% of newly synthesized DNA from PHA-stimulated human lymphocytes can be isolated as large (up to 90 kilobase pairs) double stranded fragments that resist sequential alkali and heat denaturation steps but are not closed circular. By electron microscopy about 1% have single-strand hairpin loops at one end and therefore present inverted repetitive sequences (IR-DNA). Most of the remainder have a blunt-appearing double-strand terminus at both ends (78%) or one end (18%). Indirect evidence indicates that these also are inverted complementary structures with terminal hairpin loops too small to be visualized: (1) Treatment with either a 5' or 3' single-strand exonuclease generates essentially only fragments with a single strand at one end; (2) with partial denaturation, the number of fragments with identifiable single-strand hairpin loops increases (to about 20%); (3) after S1 nuclease digestion, greater than 95% can be fully heat denatured. Cot analysis indicates that these fragments are derived from dispersed sites throughout the genome. Up to 25% of DNA released from lymphocytes during growth similarly resists denaturation, and released DNA and IR-DNA are both enriched in the same set of repetitive sequences. Thus at least a portion of IR-DNA appears to be unstable.     

Localized conversion at the crossover sequences in the site-specific DNA inversion system of bacteriophage P1

The crossover sites for site-specific C inversion consist of imperfect 12 bp inverted repeats with the dinucleotide TT at the center of symmetry. The phage P1 Cin recombinase acts not only at these cix sites but also less efficiently at cix-related sequences called quasi-cix sites, cixQ. When cixQ contains a central dinucleotide TT, crossover occurs in vivo at the 2 bp sequence TT in the normal and the quasi-cix sites. If cixQ carries only one T residue, inversion-associated localized conversion can occur at the mismatched position within the 2 bp sequence. The results indicate that Cin generates 2 bp staggered cuts in vivo and that reciprocal strand exchanges occur at these 2 bp crossover sequences.     

Extraction of high molecular weight DNA from microbial mats

Successful and accurate analysis and interpretation of metagenomic data is dependent upon the efficient extraction of high-quality, high molecular weight (HMW) community DNA. However, environmental mat samples often pose difficulties to obtaining large concentrations of high-quality, HMW DNA. Hypersaline microbial mats contain high amounts of extracellular polymeric substances (EPS)1 and salts that may inhibit downstream applications of extracted DNA. Direct and harsh methods are often used in DNA extraction from refractory samples. These methods are typically used because the EPS in mats, an adhesive matrix, binds DNA during direct lysis. As a result of harsher extraction methods, DNA becomes fragmented into small sizes. The DNA thus becomes inappropriate for large-insert vector cloning. In order to circumvent these limitations, we report an improved methodology to extract HMW DNA of good quality and quantity from hypersaline microbial mats. We employed an indirect method involving the separation of microbial cells from the background mat matrix through blending and differential centrifugation. A combination of mechanical and chemical procedures was used to extract and purify DNA from the extracted microbial cells. Our protocol yields approximately 2 μg of HMW DNA (35-50 kb) per gram of mat sample, with an A(260/280) ratio of 1.6. Furthermore, amplification of 16S rRNA genes suggests that the protocol is able to minimize or eliminate any inhibitory effects of contaminants. Our results provide an appropriate methodology for the extraction of HMW DNA from microbial mats for functional metagenomic studies and may be applicable to other environmental samples from which DNA extraction is challenging.     

Isolation of high molecular weight DNA from wholeEuglena cells

Summary A method for isolating high quality DNA from wholeEuglena cells is described. The procedure consists in: the weakening of the cell pellicle in glycerol avoiding the mechanical disruption of cells and shearing damage in DNA molecules; the decondensation ofEuglena compact chromatin directly inside the cells; the complete dissociation of cells and nucleoproteins in sarkosyl detergent; the optional digestion of proteins and RNA with DNase-free enzymes and the final purification of DNA by isopycnic banding in CsCl gradients. Degradation of DNA is prevented all along the extraction procedure by glycerol, antioxydants, EDTA and sarkosyl detergent. Using the enzymatic digestion step, DNA containing few single-stranded nicks is obtained with a yield approaching 100%. DNA with no single-stranded nick could be obtained with a 35% yield when the enzymatic digestion step was omitted. In both cases, the double-stranded DNA has an average molecular weight equal or greater than 6×10⁷. It is free of contaminants and could be easily digested with restriction enzymes. After digestion with Eco RI and size-fractionation in agarose gel this DNA has permitted specific hybridization of the rDNA sequences with a radioactive rRNA probe.Abbreviations Kbp kilobasepairs - Kb kilobases     

A bacteriophage P1-encoded modulator protein affects the P1 c1 repression system

Bacteriophage P1 encodes a tripartite immunity system composed of the immC, immI, and immT region. Their basic genetic elements are the c1 repressor of lytic functions, the c4 repressor which negatively regulates antirepressor synthesis, and the bof gene, respectively. The function of the latter will be described here. We have cloned and sequenced the bof gene from P1 wild type and a P1 bof amber mutant. Based on the position of a TAG codon of the bof amber mutant the bof wild type gene was localized. It starts with a TTG codon, comprises 82 codons, and is preceded by a promoter structure. The bof protein (Mr = 7500) was overproduced in Escherichia coli from a bof recombinant plasmid and was purified to near homogeneity. The N-terminal amino acids predicted from the DNA sequence of the bof gene were confirmed by sequence analysis of the bof protein. Using a DNA mobility shift assay, we show that bof protein enhances the binding of c1 repressor to the operator of the c1 gene. In accordance with this result, in transformants of Escherichia coli, containing both a bof- and a c1-encoding plasmid, c1 expression is down-regulated. We conclude that bof acts as a modulator protein in the repression of a multitude of c1-controlled operators in the P1 genome.