The role of the loxP spacer region in P1 site-specific recombination.

The lox-Cre site-specific recombination system of bacteriophage P1 is comprised of a site on the DNA where recombination occurs called loxP, and a protein, Cre, which mediates the reaction. The loxP site is 34 base pairs (bp) in length and consists of two 13 bp inverted repeats separated by an 8 bp spacer region. Previously it has been shown that the cleavage and strand exchange of recombining loxP sites occurs within this spacer region. We report here an analysis of various base substitution mutations within the spacer region of loxP, and conclude the following: Homology is a requirement for efficient recombination between recombining loxP sites. There is at least one position within the spacer where a base change drastically reduces recombination even when there is homology between the two recombining loxP sites. When two loxP sites containing symmetric spacer regions undergo Cre-mediated recombination in vitro, the DNA between the sites undergoes both excision and inversion with equal frequency.     

Cre induces an asymmetric DNA bend in its target loxP site

Cre initiates recombination by preferentially exchanging the bottom strands of the loxP site to form a Holliday intermediate, which is then resolved on the top strands. We previously found that the scissile AT and GC base pairs immediately 5' to the scissile phosphodiester bonds are critical in determining this order of strand exchange. We report here that the scissile base pairs also influence the Cre-induced DNA bends, the position of which correlates with the initial site of strand exchange. The binding of one Cre molecule to a loxP site induces a approximately 35 degrees asymmetric bend adjacent to the scissile GC base pair. The binding of two Cre molecules to a loxP site induces a approximately 55 degrees asymmetric bend near the center of the spacer region with a slight bias toward the scissile A. Lys-86, which contacts the scissile nucleotides, is important for establishing the bend near the scissile GC base pair when one Cre molecule is bound but has little role in positioning the bend when two Cre molecules are bound to a loxP site. We present a model relating the position of the Cre-induced bends to the order of strand exchange in the Cre-catalyzed recombination reaction.     

Bacteriophage P1 Cre-loxP site-specific recombination. Site-specific DNA topoisomerase activity of the Cre recombination protein

Site-specific recombination in bacteriophage P1 occurs between two loxP sites in the presence of the Cre recombination protein. The structure of the 34-base pair loxP site consists of two 13-base pair inverted repeats separated by an 8-base pair spacer region. A mutation in the loxP site has been constructed which deletes one of the internal bases of the spacer region at the axis of dyad symmetry. This mutant loxP site shows a 10-fold reduction in recombination activity with a wild-type site both in vivo and in vitro. This low level of intramolecular recombination between a wild-type loxP site and the mutant loxP501 site is observed in vitro only when the DNA substrate is supercoiled. The majority of the supercoiled substrate is relaxed by the Cre protein, and on longer incubations, single-stranded nicks accumulate in the DNA. We have determined that these nicks occur in both the wild-type and the mutant sites. The positions of these nicks correspond to the positions of cleavage found during recombination of two wild-type sites, suggesting that the Cre protein is attempting to carry out recombination with the mutant site but most of the time this reaction is abortive. We have determined that the Cre protein relaxes a supercoiled topoisomer of a DNA substrate containing one wild-type site and one mutant site to yield a distribution of topoisomers whose linking numbers differ by steps of one, indicating that Cre can act as a type I topoisomerase.     

Preferential synapsis of loxP sites drives ordered strand exchange in Cre-loxP site-specific recombination

The bacteriophage P1 Cre recombinase catalyzes site-specific recombination between 34-base-pair loxP sequences in a variety of topological contexts. This reaction is widely used to manipulate DNA molecules in applications ranging from benchtop cloning to genome modifications in transgenic animals. Despite the simple, highly symmetric nature of the Cre-loxP system, there is strong evidence that the reaction is asymmetric; the 'bottom' strands in the recombining loxP sites are preferentially exchanged before the 'top' strands. Here, we address the mechanistic basis for ordered strand exchange in the Cre-loxP recombination pathway. Using suicide substrates containing 5'-bridging phosphorothioate linkages at both cleavage sites, fluorescence resonance energy transfer between synapsed loxP sites and a Cre mutant that can cleave the bridging phosphorothioate linkage but not a normal phosphodiester linkage, we showed that preferential formation of a specific synaptic complex between loxP sites imposes ordered strand exchange during recombination and that synapsis stimulates cleavage of loxP sites.     

Analysis of spacer regions derived from intramolecular recombination between heterologous loxP sites

In Cre-loxP recombination system, Cre recombinase binds cooperatively to two 13bp inverted repeats in a 34bp loxP and catalyzes strand exchange in the 8bp spacer region. Up to date, spacer sequences within the recombined loxP sites derived from two loxP sties that have different 8bp spacer regions have never been analyzed. In the present study, we analyzed the spacer sequences within the recombined products, resulted from intramolecular recombination between heterologous loxP sites including M2, M3, M7, M11, and 2272 in vivo and in vitro. From the analyses, it was found that loxP sites with aberrant 8bp spacers can be generated from Cre-mediated recombination between heterologous loxP sites at significantly high frequency, proposing the possibility that recombination between heterologous loxP sites would have not undergone typical formula of Cre-loxP recombination.     

Sequence of the loxP site determines the order of strand exchange by the Cre recombinase

Conservative site-specific recombinases of the integrase family carry out recombination via a Holliday intermediate. The Cre recombinase, a member of the integrase family, was previously shown to initiate recombination by cleaving and exchanging preferentially on the bottom strand of its loxP target sequence. We have confirmed this strand bias for an intermolecular recombination reaction that used wild-type loxP sites and Cre protein. We have examined the sequence determinants for this strand preference by selectively mutating the two asymmetric scissile base-pairs in the lox site (those immediately adjacent to the sites of cleavage by Cre). We found that the initial strand exchange occurs preferentially next to the scissile G residue. Resolution of the Holliday intermediate thus formed takes place preferentially next to the scissile A residue. Lys86, which contacts the scissile nucleotides in the Cre-lox crystal structures, was important for establishing the strand preference in the resolution of the loxP-Holliday intermediate, but not for the initiation of recombination between loxP sites.     

Synapsis of loxP sites by Cre recombinase

Cre recombinase catalyzes site-specific recombination between 34-bp loxP sites in a variety of topological and cellular contexts. An obligatory step in the recombination reaction is the association, or synapsis, of Cre-bound loxP sites to form a tetrameric protein assembly that is competent for strand exchange. Using analytical ultracentrifugation and electrophoresis approaches, we have studied the energetics of Cre-mediated synapsis of loxP sites. We found that synapsis occurs with a high affinity (Kd = 10 nM) and is pH-dependent but does not require divalent cations. Surprisingly, the catalytically inactive Cre K201A mutant is fully competent for synapsis of loxP sites, yet the inactive Y324F and R173K mutants are defective for synapsis. These findings have allowed us to determine the first crystal structures of a pre-cleavage Cre-loxP synaptic complex in a configuration representing the starting point in the recombination pathway. When combined with a quantitative analysis of synapsis using loxP mutants, the structures explain how the central 8 bp of the loxP site are able to dictate the order of strand exchange in the Cre system.     

Determinants of product topology in a hybrid Cre-Tn3 resolvase site-specific recombination system

Many natural DNA site-specific recombination systems achieve directionality and/or selectivity by making recombinants with a specific DNA topology. This property requires that the DNA architecture of the synapse and the mechanism of strand exchange are both under strict control. Previously we reported that Tn3 resolvase-mediated synapsis of the accessory binding sites from the Tn3 recombination site res can impose topological selectivity on Cre/loxP recombination. Here, we show that the topology of these reactions is profoundly affected by subtle changes in the hybrid recombination site les. Reversing the orientation of loxP relative to the res accessory sequence, or adding 4 bp to the DNA between loxP and the accessory sequence, can switch between two-noded and four-noded catenane products. By analysing Holliday junction intermediates, we show that the innate bias in the order of strand exchanges at loxP is maintained despite the changes in topology. We conclude that a specific synaptic structure formed by resolvase and the res accessory sequences permits Cre to align the adjoining loxP sites in several distinct ways, and that resolvase-mediated intertwining of the accessory sequences may be less than has been assumed previously.     

Multiplex Cre/lox recombination permits selective site-specific DNA targeting to both a natural and an engineered site in the yeast genome.

Variant lox sites having an altered spacer region (heterospecific lox sites) are not proficient for Cre-mediated recombination with the canonical 34 bp loxP site, but can recombine with each other. By placing different heterospecific lox sites at different genomic locations, Cre can catalyze independent DNA recombination events at multiple loci in the same cell without concern that unwanted inter-locus recombination events will be generated. Such heterospecific lox sites also allow Cre to specifically target efficient integration of exogenous DNA to endogenous lox-like sequences that naturally occur in the genome. Specific targeting occurs only with a DNA vector carrying a heterospecific lox site in which the spacer region has been redesigned to match the 'spacer' region of the targeted chromosomal element. Moreover, in cells expressing a catalytically active Cre recombinase, naturally occurring lox-like sequences can exhibit almost 20% mitotic recombination. Thus, in the same cell, heterospecific lox sites can be used independently at multiple loci for integration, for deletion and for enhanced mitotic recombination, thereby increasing the repertoire of genomic manipulations catalyzed by the Cre recombinase.     

Reversed DNA strand cleavage specificity in initiation of Cre-LoxP recombination induced by the His289Ala active-site substitution

During the first steps of site-specific recombination, Cre protein cleaves and religates a specific homologous pair of LoxP strands to form a Holliday junction (HJ) intermediate. The HJ is resolved into recombination products through exchange of the second homologous strand pair. CreH289A, containing a His to Ala substitution in the conserved R-H-R catalytic motif, has a 150-fold reduced recombination rate and accumulates HJs. However, to produce these HJs, CreH289A exchanges the opposite set of strands compared to wild-type Cre (CreWT). To investigate how CreH289A and CreWT impose strand exchange order, we characterized their reactivities and strand cleavage preferences toward LoxP duplex and HJ substrates containing 8bp spacer substitutions. Remarkably, CreH289A had different and often opposite strand exchange preferences compared to CreWT with nearly all substrates. CreH289N was much less perturbed, implying that overall recombination rate and strand exchange depend more on His289 hydrogen bonding capability than on its acid/base properties. LoxP substitutions immediately 5' (S1 nucleotide) or 3' (S1' nucleotide) of the scissile phosphate had large effects on substrate utilization and strand exchange order. S1' substitutions, designed to alter base-unstacking events concomitant with Cre-induced LoxP bending, caused HJ accumulation and dramatically inverted the cleavage preferences. That pre-formed HJs were resolved via either strand in vitro suggests that inhibition of the "conformational switch" isomerization required to trigger the second strand exchange accounts for the observed HJ accumulation. Rather than reflecting CreWT behavior, CreH289A accumulates HJs of opposite polarity through a combination of its unique cleavage specificity and an HJ isomerization defect. The overall implication is that cleavage specificity is mediated by sequence-dependent DNA deformations that influence the scissile phosphate positioning and reactivity. A role of His289 may be to selectively stabilize the "activated" phosphate conformation in order to promote cleavage.     

Reversible dimer formation and stability of the anti-tumour single-chain Fv antibody MFE-23 by neutron scattering,analytical ultracentrifugation,and NMR and FT-IR spectroscopy

Cre recombinase uses two pairs of sequential cleavage and religation reactions to exchange homologous DNA strands between 34 base-pair (bp) LoxP recognition sequences. In the oligomeric recombination complex, a switch between "cleaving" and "non-cleaving" subunit conformations regulates the number, order, and regio-specificity of the strand exchanges. However, the particular sequence of events has been in question. From analysis of strand composition of the Holliday junction (HJ) intermediate, we determined that Cre initiates recombination of LoxP by cleaving the upper strand on the left arm. Cre preferred to react with the left arm of a LoxP suicide substrate, but at a similar rate to the right arm, indicating that the first strand to be exchanged is selected prior to cleavage. We propose that during complex assembly the cleaving subunit preferentially associates with the LoxP left arm, directing the first strand exchange to that side. In addition, this biased assembly would enforce productive orientation of LoxP sites in the recombination synapses. A novel Cre-HJ complex structure in which LoxP was oriented with the left arm bound by the cleaving Cre subunit suggested a physical basis for the strand exchange order. Lys86 and Lys201 interact with the left arm scissile adenine base differently than in structures that have a scissile guanine. These interactions are associated with positioning the 198-208 loop, a structural component of the conformational switch, in a configuration that is specific to the cleaving conformation. Our results suggest that strand exchange order and site alignment are regulated by an "induced fit" mechanism in which the cleaving conformation is selectively stabilized through protein-DNA interactions with the scissile base on the strand that is cleaved first.     

Topological selectivity of a hybrid site-specific recombination system with elements from Tn3 res/resolvase and bacteriophage P1 loxP/Cre.

In order to investigate the functions of the parts of the Tn 3 recombination site res, we created hybrid recombination sites by placing the loxP site for Cre recombinase adjacent to the "accessory" resolvase-binding sites II and III of res. The efficiency and product topology of in vitro recombination by Cre between two of these hybrid sites were affected by the addition of Tn 3 resolvase. The effects of resolvase addition were dependent on the relative orientation and spacing of the elements of the hybrid sites. Substrates with sites II and III of res close to loxP gave specific catenated or knotted products (four-noded catenane, three-noded knot) when resolvase and Cre were added together. The product topological complexity increased when the length of the spacer DNA segment between loxP and res site II was increased. Similar resolvase-induced effects on Cre recombination product topology were observed in reactions of substrates with loxP sites adjacent to full res sites. The results demonstrate that the res accessory sites are sufficient to impose topological selectivity on recombination, and imply that intertwining of two sets of accessory sites defines the simple catenane product topology in normal resolvase-mediated recombination. They are also consistent with current models for the mechanism of catalysis by Cre.     

Communication between accessory factors and the Cre recombinase at hybrid psi-loxP sites

By placing loxP adjacent to the accessory sequences from the Xer/psi multimer resolution system, we have imposed topological selectivity and specificity on Cre/loxP recombination. In this hybrid recombination system, the Xer accessory protein PepA binds to psi accessory sequences, interwraps them, and brings the loxP sites together such that the product of recombination is a four-node catenane. Here, we investigate communication between PepA and Cre by varying the distance between loxP and the accessory sequences, and by altering the orientation of loxP. The yield of four-node catenane and the efficiency of recombination in the presence of PepA varied with the helical phase of loxP with respect to the accessory sequences. When the orientation of loxP was reversed, or when half a helical turn was added between the accessory sequences and loxP, PepA reversed the preferred order of strand exchange by Cre at loxP. The results imply that PepA and the accessory sequences define precisely the geometry of the synapse formed by the loxP sites, and that this overcomes the innate preference of Cre to initiate recombination on the bottom strand of loxP. Further analysis of our results demonstrates that PepA can stimulate strand exchange by Cre in two distinct synaptic complexes, with the C-terminal domains of Cre facing either towards or away from PepA. Thus, no specific PepA-recombinase interaction is required, and correct juxtaposition of the loxP sites is sufficient to activate Cre in this system.     

DNA recognition, strand selectivity, and cleavage mode during integrase family site-specific recombination

We have probed the association of Flp recombinase with its DNA target using protein footprinting assays. The results are consistent with the domain organization of the Flp protein and with the general features of the protein-DNA interactions revealed by the crystal structures of the recombination intermediates formed by Cre, the Flp-related recombinase. The similarity in the organization of the Flp and Cre target sites and in their recognition by the respective recombinases implies that the overall DNA-protein geometry during strand cleavage in the two systems must also be similar. Within the functional recombinase dimer, it is the interaction between two recombinase monomers bound on either side of the strand exchange region (or spacer) that provides the allosteric activation of a single active site. Whereas Cre utilizes the cleavage nucleophile (the active site tyrosine) in cis, Flp utilizes it in trans (one monomer donating the tyrosine to its partner). By using synthetic Cre and Flp DNA substrates that are geometrically restricted in similar ways, we have mapped the positioning of the active and inactive tyrosine residues during cis and trans cleavage events. We find that, for a fixed substrate geometry, Flp and Cre cleave the labile phosphodiester bond at the same spacer end, not at opposite ends. Our results provide a model that accommodates local heterogeneities in peptide orientations in the two systems while preserving the global functional architecture of the reaction complex.     

Induced DNA recombination by Cre recombinase protein transduction

Cre is a DNA recombinase that recognizes 34 base-pair loxP sites of recombination. We have developed a cell-permeable Cre recombinase, TATCre, that is capable of mediating deletion of loxP-flanked targets by simply adding TATCre to cell cultures. Thus, TATCre allows efficient induced DNA recombination without the use of a Cre recombinase transgene or any other genetic material and should prove useful for the genetic manipulation of a wide variety of cell types that have been engineered to possess loxP sites.     

Altered directionality in the Cre-LoxP site-specific recombination pathway

The site-specific recombinase Cre must employ control mechanisms to impose directionality on recombination. When two recombination sites (locus of crossing over in phage P1, loxP) are placed as direct repeats on the same DNA molecule, collision between loxP-bound Cre dimers leads to excision of intervening DNA. If two sites are placed as inverted repeats, the intervening segment is flipped around. Cre catalyzes these reactions in the absence of protein co-factors. Current models suggest that directionality is controlled at two steps in the recombination pathway: the juxtaposition of loxP sites and the single-strand-transfer reactions within the synaptic complex. Here, we show that in Escherichia coli strain 294-Cre, directionality for recombination is altered when the expression of Cre is increased. This leads to deletion instead of inversion on substrates carrying two loxP sites as inverted repeats. The nucleotide sequence composition of loxP sites remaining in aberrant products indicates that site alignment and/or DNA strand transfer in the in vivo Cre-loxP recombination pathway are not always tightly controlled.     

Restoration of catalytic functions in Cre recombinase mutants by electrostatic compensation between active site and DNA substrate

Two conserved catalytic arginines, Arg-173 and Arg-292, of the tyrosine site-specific recombinase Cre are essential for the transesterification steps of strand cleavage and joining in native DNA substrates containing scissile phosphate groups. The active site tyrosine (Tyr-324) provides the nucleophile for the cleavage reaction, and forms a covalent 3′-phosphotyrosyl intermediate. The 5′-hydroxyl group formed during cleavage provides the nucleophile for the joining reaction between DNA partners, yielding strand exchange. Previous work showed that substitution of the scissile phosphate (P) by methylphosphonate (MeP) permits strand cleavage by a Cre variant lacking Arg-292. We now demonstrate that MeP activation and cleavage are not blocked by substitution of Arg-173 or even simultaneous substitutions of Arg-173 and Arg-292 by alanine. Furthermore, Cre(R173A) and Cre(R292A) are competent in strand joining, Cre(R173A) being less efficient. No joining activity is detected with Cre(R173A, R292A). Consistent with their ability to cleave and join strands, Cre(R173A) and Cre(R292A) can promote recombination between two MeP-full-site DNA partners. These findings shed light on the overall contribution of active site electrostatics, and tease apart distinctive contributions of the individual arginines, to the chemical steps of recombination. They have general implications in active site mechanisms that promote important phosphoryl transfer reactions in nucleic acids.     

Symmetric DNA sites are functionally asymmetric within Flp and Cre site-specific DNA recombination synapses

Flp and Cre-mediated recombination on symmetrized FRT and loxP sites, respectively, in circular plasmid substrates yield both DNA inversion and deletion. However, upon sequestering three negative supercoils outside the recombination complex using the resII-resIII synapse formed by Tn3 resolvase and the LER synapse formed by phage Mu transposase in the case of Flp and Cre, respectively, the reactions are channeled towards inversion at the expense of deletion. The inversion product is a trefoil, its unique topology being conferred by the external resolvase or LER synapse. Thus, Flp and Cre assign their symmetrized substrates a strictly antiparallel orientation with respect to strand cleavage and exchange. These conclusions are supported by the product profiles from tethered parallel and antiparallel native FRT sites in dilution and competition assays. Furthermore, the observed recombination bias favoring deletion over inversion in a nicked circular substrate containing two symmetrized FRT sites is consistent with the predictions from Monte Carlo simulations based on antiparallel synapsis of the DNA partners.     

Half-site recombinations mediated by yeast site-specific recombinases Flp and R.

The Flp recombinase of Saccharomyces cerevisae and the related R recombinase of Zygosaccharomyces rouxii can efficiently catalyze strand cleavage and strand exchange reactions in half recombination sites. A half-site consists of one recombinase binding element, a recombinase cleavage site on one strand and a 5' spacer hydroxyl group on the other that can initiate the strand exchange reaction. We have studied the various types of strand exchanges that half-sites can participate in. Reaction between a left half-site and a right half-site generates a full recombination site. Strand transfer between two left half-sites or between two right half-sites produces pseudo-full-sites. Strand transfer within a half-site results in a stem-loop or hairpin product. The half-site strand transfer reaction is fairly indifferent to the spacer sequence of the substrate per se and is less sensitive to variations in spacer lengths than a full-site recombination reaction. The optimal spacer length of eight to ten nucleotides observed for the Flp half-site reaction likely permits the most productive catalytic interactions between two Flp monomers bound to each of two partner half-sites. When reacted with a full-site, the half-site can give rise to a normal or reverse recombinant, corresponding to homologous or non-homologous alignments of the spacer sequences during substrate synapsis. The contrary recombination (resulting from non-homologous spacer alignment), whose level is low relative to normal recombination, is partly suppressed when the half-site spacer ends in a 5'-phosphate rather than a 5'-hydroxyl group. Thus, the early steps of recombination, namely synapsis and initial stand transfer, are not dependent on complete spacer homology between the two recombining substrates. The selection of properly aligned substrate partners must occur at the homology dependent branch migration step. In reactions containing a mixture of Flp and R half-sites, Flp and R catalyze strand transfer, almost exclusively, within or between their respective cognate substrates. However, under conditions where self-crosses are inhibited, strand exchange between a Flp half-site and an R half-site appears to be stimulated by a combination of R and Flp.