Analysis of the replication region of a mycobacterial plasmid, pMSC262.

We determined the nucleotide sequence of a DNA fragment which contains the replication region of pMSC262, a Mycobacterium scrofulaceum plasmid used to construct the Mycobacterium-Escherichia coli shuttle vector. The complete sequence of the fragment contained 2,504 bp with an overall G+C content of 69.8%. By deletion analysis, we found that the minimum length required for plasmid replication in M. bovis BCG was about 1.6 kb. Within this region, several open reading frames (ORFs) and a putative replication origin (ori) were identified by computer analysis. One of the ORFs, ORF2, which encodes a putative 28.9-kDa basic protein with characteristics of DNA-binding proteins, appeared to be involved in replication of the plasmid in BCG. By separation of ORF2 and the putative ori region, it was revealed that the relative locations of ORF2 and the putative ori region are likely important for replication in BCG. No DNA or amino acid homologies were found between this replication region and that of pAL5000, another mycobacterial plasmid used for vector plasmid construction. In addition, we found that this replicon did not lead to replication in E. coli and was compatible in BCG with pAL5000-derived vector plasmid pYUB75 (R. G. Barletta, D. D. Kim, S. B. Snapper, B. R. Bloom, and W. R. Jacobs, J., J. Gen. Microbiol. 138:23-30, 1992).     

Functional analysis of pAL5000 plasmid in Mycobacterium fortuitum.

Four of the five open reading frames (ORFs) present in Myobacterium fortuitum pAL5000 plasmid (ORF1, ORF3, ORF4, and ORF5) are dispensable for replication in M. fortuitum. However, two additional ORFs (ORF1 and ORF5) were necessary for replication in a Myobacterium smegmatis heterologous host containing an efficient plasmid transformation mutation.     

Functional analysis of pAL5000, a plasmid from Mycobacterium fortuitum: construction of a "mini" mycobacterium-Escherichia coli shuttle vector

Functional domains of pAL5000 were determined by gene disruption and deletion analysis. Of the five plasmid open reading frames (ORFs), ORF1 to ORF5, and a putative origin of replication previously identified (J. Rauzier, J. Moniz-Pereira, and B. Gicquel-Sanzey, Gene 71:315-321), two of the ORFs (ORF3 and ORF4) were deemed dispensable for plasmid replication. A "mini" mycobacterium-Escherichia coli shuttle plasmid applicable for general recombinant DNA studies in mycobacteria was constructed by using the gene for Kanr (Tn903) as a selective marker. Heterologous expression of the gene for Kanr was confirmed by Western blotting (immunoblotting) analysis.     

Transposition-induced structural instability of Escherichia coli-mycobacteria shuttle vectors

Escherichia coli-mycobacteria shuttle vectors, derived from pAL5000 (a mycobacterial plasmid) and pUC19, were frequently found to undergo structural alterations due to transposition of IS1096, a Mycobacterium smegmatis transposable element, at a cluster of sites located within a small region of 60 bp, immediately upstream of a kanamycin resistance gene present in these vectors. The structural alterations led to deletion of large regions of the vector which, in several cases, were found to extend into the ORF2 (RepB) coding sequences of the pAL5000 replication region without affecting its replication capability. This suggests that the entire ORF2 coding sequences of the pAL5000 replication region may not be essential for replication of pAL5000-derived vectors. The deletion derivatives, which contain the minimal sequences required for replication and selection in mycobacteria, were found to be structurally stable and therefore these could be potentially used as stable vector systems for the transformation of mycobacteria.     

A stable Escherichia coli-mycobacteria shuttle vector 'pSO246' in Mycobacterium bovis BCG

Abstract The most widely used plasmid vector system in mycobacteria is based on pAL5000 from Mycobacterium fortuitum . The derivatives of the pAL5000-based shuttle vectors between Escherichia coli and mycobacteria, which we have utilized to secrete recombinant antigens, were generated. The stability of the vectors was assessed in Mycobacterium bovis BCG (BCG). The plasmid vector pSO246 was stable in BCG for at least 50 generations.     

The Development of a Novel Mycobacterium-Escherichia coli Shuttle Vector System Using pMyong2, a Linear Plasmid from Mycobacterium yongonense DSM 45126T

The Mycobacterium-Escherichia coli shuttle vector system, equipped with the pAL5000 replicon, is widely used for heterologous gene expression and gene delivery in mycobacteria. Despite its extensive use, this system has certain limitations, which has led to the development of alternative mycobacterial vector systems. The present study describes the molecular structure and expression profiles of a novel 18-kb linear plasmid, pMyong2, from Mycobacterium yongonense. Sixteen open reading frames and a putative origin of replication were identified, and the compatibility of the pMyong2 and pAL5000 vector systems was demonstrated. In recombinant Mycobacterium smegmatis (rSmeg), the pMyong2 vector system showed a copy number that was approximately 37 times greater than that of pAL5000. Furthermore, pMyong2 increased the mRNA and protein expression of the human macrophage migration inhibitory factor (hMIF) over pAL5000 levels by approximately 10-fold and 50-fold, respectively, demonstrating the potential utility of the pMyong2 vector system in heterologous gene expression in mycobacteria. Successful delivery of the EGFP gene into mammalian cells via rSmeg carrying the pMyong2 vector system was also observed, demonstrating the feasibility of this system for DNA delivery. In conclusion, the pMyong2 vector system could be effectively used not only for the in vivo delivery of recombinant protein and DNA but also for mycobacterial genetic studies as an alternative or a complement to the pAL5000 vector system.     

Futile attempts to differentiate provide molecular evidence for individual differences within a population of cells during cellular reprogramming

A cryptic plasmid from Arthrobacter rhombi PRH1, designated as pPRH, was sequenced and characterized. It was 5000 bp in length with a G+C content of 66 mol%. The plasmid pPRH was predicted to encode six putative open reading frames (ORFs), in which ORF2 and ORF3 formed the minimal replicon of plasmid pPRH and shared 55-61% and 60-69% homology, respectively, with the RepA and RepB proteins of reported rhodococcal plasmids. Sequence analysis revealed a typical ColE2-type ori located 45 bp upstream of the gene repA. Sequence and phylogenetic analysis led to the conclusion that pPRH is a representative of a novel group of pAL5000 subfamily of ColE2 family plasmids. Three shuttle vectors pRMU824, pRMU824Km and pRMU824Tc, encoding chloramphenicol resistance, were constructed. The latter two harboured additional antibiotic resistance genes kan and tet, respectively. All vectors successfully replicated in Escherichia coli, Arthrobacter and Rhodococcus spp. The vector pRMU824Km was employed for functional screening of 2-hydroxypyridine catabolism encoding genes from Arthrobacter sp. PY22. Sequence analysis of the cloned 6-kb DNA fragment revealed eight putative ORFs, among which hpyB gene encoded a putative monooxygenase.     

Gene replacement in mycobacteria by using incompatible plasmids

A simple and efficient delivery system was developed for making targeted gene knockouts in Mycobacterium smegmatis. This delivery system relies on the use of a pair of replicating plasmids, which are incompatible. Incompatible plasmids share elements of the same replication machinery and so compete with each other during both replication and partitioning into daughter cells. Such plasmids can be maintained together in the presence of antibiotics; however, removal of selection leads to the loss of one or both plasmids. For mutagenesis, two replicating plasmids based on pAL5000 are introduced; one of these plasmids carries a mutated allele of the targeted gene. Homologous recombination is allowed to take place, and either one or both of the vectors are lost through the pressure of incompatibility, allowing the phenotypic effects of the mutant to be studied. Several different plasmid combinations were tested to optimize loss in the absence of antibiotic selection. pAL5000 carries two replication genes (repA and repB), which act in trans, and the use of vectors that each lack one rep gene and complement each other resulted in the loss of both plasmids in M. smegmatis and Mycobacterium bovis BCG. The rate of loss was increased by the incorporation of an additional incompatibility region in one of the plasmids. To facilitate cloning when the system was used, we constructed plasmid vector pairs that allow simple addition of selection and screening genes on flexible gene cassettes. Using this system, we demonstrated that M. smegmatis pyrF mutants could be isolated at high frequency. This method should also be useful in other species in which pAL5000 replicates, including Mycobacterium tuberculosis.     

Use of the pAL5000 replicon in PAH-degrading mycobacteria: application for strain labelling and promoter probing

Three environmental Mycobacterium strains (LB501T, LB307T and VM552) able to degrade anthracene, phenanthrene or pyrene, respectively, were successfully electroporated with pAL5000-based plasmids containing the green fluorescent protein (gfp) gene of Aequoria victoria under the control of the hsp60 promoter of Mycobacterium bovis following a slightly modified standard procedure. Transformants showed irregular gfp expression profiles. Four plasmid derivatives were constructed that contained gene promoters isolated from, and adapted to, gene expression in polycyclic aromatic hydrocarbon (PAH)-degrading mycobacteria. One derivative directed strong and homogeneous expression of GFP, allowing dual analysis of both GFP- and PAH-derived fluorescence as assessed by confocal laser scanning microscopy. The results reported here demonstrate the suitability of the pAL5000 replicon for the development of recombinant DNA-based studies in PAH-degrading Mycobacterium spp.     

Molecular characterization of the vir regulon of Agrobacterium tumefaciens: complete nucleotide sequence and gene organization of the 28.63-kbp regulon cloned as a single unit

The entire vir regulon of Agrobacterium tumefaciens was subcloned and the complete 28.6-kbp nucleotide sequence was determined. The regulon was cloned as a single unit into two replicons, one of which replicates at a high copy number in this bacterium, and a second which has broad-host-range features to replicate in other Gram-negative bacteria. These vir region plasmids are able to confer in trans the processing and transfer activities on a second plasmid containing the T-DNA. In the high copy number vir region plasmid pUCD2614, a moderate increase in basal vir gene expression was observed as judged by virE::cat fusion expression assays relative to the wild-type control plasmid. Furthermore, higher efficiencies of tobacco leaf disk transformation were observed than with the widely used vir helper plasmid pAL4404. The nucleotide sequence studies showed that the vir region consists of 28,631 bp comprising 24 open reading frames which encode proteins involved in tumorigenicity. Two open reading frames not previously characterized, virH and ORF5, were uncovered within the virD/virE intervening spacer region. Together these studies more completely characterize the structure and function of the vir regulon.     

Characterization of Rhodococcus–E. coli Shuttle Vector pNC9501 Constructed from the Cryptic Plasmid of a Propene-Degrading Bacterium

Rhodococcus–E. coli shuttle vector pNC9501 was constructed using circular cryptic plasmid pNC903 from propene-degrading Rhodococcus ruber P-II-123-1. Sequence analysis of pNC903 revealed two open-reading frames encoding the replication proteins Reps A and B. In the amino acid sequence of the putative Rep B, a helix-turn-helix motif, which is responsible for the binding of DNA, was found. Sequencing of the upstream region of the putative Rep A and incompatibility tests revealed that pNC903 is a Mycobacterium-derived pAL5000-related plasmid. pNC9501 could also be transformed into Mycobacterium sp. showing good segregation stability (<0.1% plasmid loss/generation) in the absence of selective pressure.     

Design of a novel system for the construction of vectors for Agrobacterium-mediated plant transformation

Summary The loxP-Cre site-specific recombination system of phage P1 was used to develop a novel strategy to construct cointegrate vectors for Agrobacterium-mediated plant transformation. A pTi disarmed helper plasmid (pAL1166) was constructed by replacing the oncogenic T-DNA by a loxP sequence and a spectinomycin resistance marker in the octopine-type pTiB6 plasmid. The cre gene was cloned into an unstable incP plasmid. A third plasmid, which did not replicate in Agrobacterium and contained another loxP sequence together with a kanamycin resistance marker, was used to test the system. Electroporation of this third plasmid into an Agrobacterium strain harbouring both pAL1166 and the Cre-encoding plasmid resulted in kanamycin-resistant cells containing a cointegrate between pAL1166 and the incoming plasmid. Cointegration occurred by Cre-mediated recombination at the loxP sites, and the cointegrate was stabilized in the Agrobacterium cells by the loss of the Cre-encoding plasmid shortly after the recombination event had taken place.     

Temperature-sensitive mutants of the mycobacterium plasmid pAL5000

Two plasmids were isolated as thermosensitive replicons following in vitro mutagenesis of pB4, a pAL5000 derivative mycobacteria/Escherichia coli shuttle plasmid. Plasmids pCG59 and pCG63 replicate at 30 degrees C but not at 39 degrees C. This will allow their utilisation for transposon delivery, site-specific integration, or allele exchange.     

Sequencing, expression and biochemical characterization of the Porphyromonas gingivalis pepO gene encoding a protein homologous to human endothelin-converting enzyme

We have determined the nucleotide sequence of the clone pAL2 obtained from Porphyromonas gingivalis 381 in the previous study [Ansai et al. (1995) Microbiology 141, 2047-20521. The DNA sequence analysis of this fragment revealed one complete ORF and one incomplete ORF. The ORF encoded a protein (PgPepO) of 690 amino acids with a calculated molecular weight of 78796. The deduced amino acid sequence exhibited a significant homology with human endothelin-converting enzyme (ECE)-1. Recombinant PgPepO was purified to homogeneity and characterized. The purified enzyme was strongly inhibited by phosphoramidon, and converted big endothelin-1 to endothelin-1. Furthermore, the purified PgPepO strongly cross-reacted with a monoclonal antibody against rat ECE-1. These results indicate that PgPepO has striking similarity to mammalian ECE in structure and function.     

Dr fimbriae coding region associated hemolytic activity of Escherichia coli

Abstract Escherichia coli LE392 (pAL28) was previously isolated as a positive clone harboring the alginate lyase gene ( aly ) from an alginate-degrading strain, Pseudomonas sp. OS-ALG-9. The plasmid pAL205, one of the constructs obtained after successive subcloning of pAL28, gave the highest expression of aly in E. coli cells. A 8-fold increase in the alginate lyase (Aly) activity in E. coli JM109 (pAL205) was induced with isopropyl-β-d-thiogalactoside, which was 210 times higher than that in E. coli LE392 (pAL28). The highly significant increase in the expression of the Aly enzyme with pAL205 was investigated through the nucleotide sequence around the 5' region of aly as well as the N -terminal sequence of the purified enzyme. It was found that the Aly expressed in E. coli (pAL205) was a fused protein containing 7 residues from the N -terminus of β-galactosidase α-peptide and the mature protein found in the Pseudomonas sp. except for three residues in the N -terminal.     

Isolation by genetic labeling of a new mycobacterial plasmid, pJAZ38, from Mycobacterium fortuitum.

In a two-step mating experiment with recipient strains of Mycobacterium smegmatis, the Mycobacterium fortuitum cryptic plasmid pJAZ38 was isolated. Plasmid pJAZ38 was genetically labeled by cointegration formation mediated by the kanamycin-resistant mycobacterial transposon Tn611. The region responsible for replication of pJAZ38 was located and sequenced. This region showed homology with the Mycobacterium avium plasmid pLR7 and the Mycobacterium scrofulaceum plasmid pMSC262, a family of plasmids which have been found to be widespread throughout the mycobacteria. Further experiments showed pJAZ38 to be stably inherited in the absence of selection pressure and compatible with the most commonly used mycobacterial replicon, pAL5000. In contrast to pLR7 and pMSC262, pJAZ38 was able to replicate in M. smegmatis mc(2)155, making it a useful tool for mycobacterial genetics.     

A cryptic plasmid, pAO1, from a compost bacterium, Bacillus sp

The complete nucleotide sequence of a new cryptic plasmid, pAO1 isolated from a compost bacterium Bacillus sp., has been analyzed. Analysis of the PCR-based 16S rRNA sequence showed the bacterium harboring pAO1 was closely related to Bacillus pallidus. The plasmid pAO1 was 3,325 bp in size. Two open reading frames, ORF1 and ORF2, encoding putative polypeptides of 248 and 290 amino acids, respectively, were identified within the sequence. The ORF1 has a limited sequence similarity to an integrase/recombinase, while the ORF2 has high similarity with the replication protein of pBC1 from Bacillus coagulans. A putative origin sequence for a plus-strand was located between ORFs. Southern blot analysis indicates this plasmid replicates via a rolling circle-type mechanism.