Surface Plasmon Coupling Effect of Gold Nanoparticles with Different Shape and Size on Conventional Surface Plasmon Resonance Signal

The labeling strategy with gold nanoparticles for the conventional surface plasmon resonance (SPR) signal enhancement has been frequently used for the sensitive determination of small molecules binding to its interaction partners. However, the influence of gold nanoparticles with different size and shape on SPR signal is not known. In this paper, three kinds of gold nanoparticles, namely nanorods, nanospheres, and nanooctahedrons with different size, were prepared and used to investigate their effects on the conventional SPR signal at a fixed excitation wavelength 670 nm. It was found that the SPR signal (i.e., resonant angle shift) was varied with the shapes and sizes of gold nanoparticles in suspension at a fixed concentration due to their different plasmon absorbance bands. For gold nanorods with different longitudinal absorbance bands, three conventional SPR signal regions could be clearly observed when the gold nanorod suspensions were separately introduced onto the SPR sensor chip surface. One region was the longitudinal absorbance bands coinciding with or close to the SPR excitation wavelength that suppressed the SPR angle shift. The second region was the longitudinal absorbance bands at 624 to 639 and 728 to 763 nm that produced a moderate increase on the SPR resonant angle shift. The third region was found for the longitudinal absorbance bands from 700 to 726 nm that resulted in a remarkable increase in the SPR angle shift responses. This phenomenon can be explained on the basis of calculation of the correlation of SPR angle shift response with the gold nanorod longitudinal absorbance bands. For nanospheres and nanooctahedrons, the SPR angle shift responses were found to be particle shape and size dependent in a simple way with a sustaining increase when the sizes of the nanoparticles were increased. Consequently, a guideline for choosing gold nanoparticles as tags is suggested for the SPR determination of small molecules with binding to the immobilized interaction partners.     

Intracellular Localized Surface Plasmonic Sensing for Subcellular Diagnosis

This paper proposes a method for diagnosing intracellular conditions and organelles of cells with localized surface plasmonic resonance (LSPR) by directly internalizing the gold nanoparticles (AuNPs) into the cells and measuring their plasmonic properties through hyperspectral imaging. This technique will be useful for direct diagnosis of cellular organelles, which have potential for cellular biology, proteomics, pharmaceuticals, drug discovery etc. Furthermore, localization and characterization of citrate-capped gold nanoparticles in HeLa cells were studied, by hyperspectral microscopy and other imaging techniques. Here, we present the method of internalizing the gold nanoparticles into the cells and subcellular organelles to facilitate subcellular plasmonic measurements. An advanced label-free visualization technique, namely hyperspectral microscopy providing images and spectral data simultaneously, was used to confirm the internalization of gold nanoparticles and to reveal their optical properties for possible intracellular plasmonic detection. Hyperspectral technology has proved to be effective in the analysis of the spectral profile of gold nanoparticles, internalized under different conditions. Using this relatively novel technique, it is possible to study the plasmonic properties of particles, localized in different parts of the cell. The position of the plasmon bands reflects the interactions of gold nanoparticles with different subcellular systems, including particle-nucleus interactions. Our results revealed the effect of the different intracellular interactions on the aggregation pattern of gold nanoparticles, inside the cells. This novel technique opens the door to intracellular plasmonics, an entirely new field, with important potential applications in life sciences. Similarly, the characterization of AuNP inside the cell was validated using traditional methods such as light microscopy and scanning electron microscopy. Under the conditions studied in this work, gold nanoparticles were found to be non-toxic to HeLa (cervical cancer) cells.     

On Optical Properties of Dilute Colloidal Gold

Wavelength-dependent complex effective refractive index of dilute colloidal gold, i.e., spherical gold nanoparticles in water was measured using a reflectometer and a spectrophotometer. The spectral data obtained was used for the calculation of the wavelength-dependent complex permittivity of the gold nanoparticle with the aid of the Maxwell Garnett effective medium model for the colloid. It is shown that the wavelength-dependent complex permittivity of gold nanoparticle is different from the complex permittivity of bulk gold. Furthermore, Smakula’s formula is introduced for the calculation of the relative concentration of gold nanoparticles embedded in liquid using absorption data of the colloid.     

Colorimetric detection of mercury, lead and copper ions simultaneously using protein-functionalized gold nanoparticles

A simple, cost-effective and rapid colorimetric method for any or all of Hg(2+), Pb(2+) and Cu(2+) detection using papain-functionalized gold nanoparticles (P-AuNPs) has been developed. Papain is a protein with seven cystein residues, which can selectively bind with Hg(2+), Pb(2+) and Cu(2+). We functionalized gold nanoparticles with papain. The P-AuNPs could be used to simultaneously detect Hg(2+), Pb(2+) and Cu(2+), and showed different responses to the three ions in an aqueous solution based on the aggregation-induced color change of gold nanoparticles. The P-AuNPs displayed the most obvious response to mercury ions in water in contrast to lead and copper ions, and the real water sample analysis verified the conclusion. The sensitivity of the detection system was influenced by the pH of the P-AuNPs solution, the concentration of P-AuNPs and the size of gold nanoparticles, and we found that larger gold nanoparticles contributed to more sensitive results. The detection system can detect as low as 200 nM Hg(2+), Pb(2+) or Cu(2+) using 42 nm gold nanoparticles. We expect our approach to have wide-ranging applications in the developing region for monitoring water quality in some areas.     

Exploring geometric properties of gold nanoparticles using TEM images to explain their chaperone like activity for citrate synthase

Study on geometric properties of nanoparticles and their relation with biomolecular activities, especially protein is quite a new field to explore. This work was carried out towards this direction where images of gold nanoparticles obtained from transmission electron microscopy were processed to extract their size and area profile at different experimental conditions including and excluding a protein, citrate synthase. Since the images were ill-posed, texture of a context-window for each pixel was used as input to a back-propagation network architecture to obtain decision on its membership as nanoparticle. The segmented images were further analysed by k-means clustering to derive geometric properties of individual nanoparticles even from their assembled form. The extracted geometric information was found to be crucial to give a model featuring porous cage like configuration of nanoparticle assembly using which the chaperone like activity of gold nanoparticles can be explained.     

Application of gold nanoparticles produced by laser ablation for immunochromatographic assay labeling

Nanodispersed gold is widely used as a marker in different analytical systems. For such purposes, it is usually obtained by the reduction of salts. This work studied the potential analytical applications of nanodispersed gold obtained by laser ablation because gold produced with this method has no chemical coating. The nanoparticles produced were characterized by transmission electron microscopy and spectrophotometry. The average size of the particles was 24.5 nm. Concentration dependences of antibody immobilization on ablative gold were obtained. With the use of antibody-conjugated nanoparticles, an immunochromatographic system was constructed for the detection of zearalenone mycotoxin. This immunoassay was characterized by a detection limit of 0.1 ng/ml antigen with an assay duration of only 15 min, which is on par with current test systems comprising nanodispersed gold obtained by chemical reduction. The simplicity of ablative dispersing makes this a prospective method for the labeling of various antibodies for analytical use.     

A new amplification strategy for ultrasensitive electrochemical aptasensor with network-like thiocyanuric acid/gold nanoparticles

An ultrasensitive and highly specific electrochemical aptasensor for detection of thrombin based on gold nanoparticles and thiocyanuric acid is presented. For this proposed aptasensor, aptamerI was immobilized on the magnetic nanoparticles, aptamerII was labeled with gold nanoparticles. The magnetic nanoparticle was used for separation and collection, and gold nanoparticle offered excellent electrochemical signal transduction. Through the specific recognition for thrombin, a sandwich format of magnetic nanoparticle/thrombin/gold nanoparticle was fabricated, and the signal amplification was further implemented by forming network-like thiocyanuric acid/gold nanoparticles. A significant sensitivity enhancement had been obtained, and the detection limit was down to 7.82 aM. The presence of other proteins such as BSA and lysozyme did not affect the detection of thrombin, which indicates a high specificity of thrombin detection could be achieved. This electrochemical aptasensor is expected to have wide applications in protein monitoring and disease diagnosis.     

Highly Doped Carbon Nanotubes with Gold Nanoparticles and Their Influence on Electrical Conductivity and Thermopower of Nanocomposites

Carbon nanotubes (CNTs) are often used as conductive fillers in composite materials, but electrical conductivity is limited by the maximum filler concentration that is necessary to maintain composite structures. This paper presents further improvement in electrical conductivity by precipitating gold nanoparticles onto CNTs. In our composites, the concentrations of CNTs and poly (vinyl acetate) were respectively 60 and 10 vol%. Four different gold concentrations, 0, 10, 15, or 20 vol% were used to compare the influence of the gold precipitation on electrical conductivity and thermopower of the composites. The remaining portion was occupied by poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate), which de-bundled and stabilized CNTs in water during synthesis processes. The concentrations of gold nanoparticles are below the percolation threshold of similar composites. However, with 15-vol% gold, the electrical conductivity of our composites was as high as ∼6×10⁵ S/m, which is at least ∼500% higher than those of similar composites as well as orders of magnitude higher than those of other polymer composites containing CNTs and gold particles. According to our analysis with a variable range hopping model, the high conductivity can be attributed to gold doping on CNT networks. Additionally, the electrical properties of composites made of different types of CNTs were also compared.     

Influence of a shape of gold nanoparticles on the dose enhancement in the wide range of gold mass concentration for high-energy X-ray beams from a medical linac

AimThis work is focused on the Monte Carlo microdosimetric calculations taking into account the influence of the AuNPs’ shape, size and mass concentration on the radiation dose enhancement for the high-energy 6 MV and 18 MV X-ray therapeutic beams from a medical linac.BackgroundDue to a high atomic number and the photoelectric effect, gold nanoparticles can significantly enhance doses of ionizing radiation. However, this enhancement depends upon several parameters, such as, inter alia, nanoparticles’ shape etc.MethodThe simulated system was composed of the therapeutic beam, a water phantom with the target volume (with and without AuNPs) located at the depth of the maximum dose, i.e. at 1.5 cm for the 6 MV beam and at 3.5 cm for the 18 MV one. In the study the GEANT4 code was used because it makes it possible to get a very short step of simulation which is required in case of simulating the radiation interactions with nanostructures.ResultsThe dependence between the dose increase and the mass concentration of gold was determined and described by a simple mathematical formula for three different shapes of gold nanoparticles — two nanorods of different sizes and a flat 2D structure. The dose increase with the saturation occurring with the increasing mass concentration of gold was observed.ConclusionsIt was found that relatively large cylindrical gold nanoparticles can limit the increase of the dose absorbed in the target volume much more than the large 2D gold nanostructure.     

Linear clusters of gold nanoparticles in quasinematic layers of DNA liquid-crystalline dispersion particles

The effects of small size (～2 nm) gold nanoparticles on the properties of particles of cholesteric liquid-crystalline dispersions formed by double-stranded DNA molecules were analyzed. It has been shown that gold nanoparticles induce two different processes. First, they facilitate reorganization of the spatial cholesteric structure of dispersion particles to nematic one. This process is accompanied by the fast decrease in the amplitude of abnormal band in the CD spectrum. Second, they can form ensembles consisting of gold nanoparticles. This process is accompanied by the development and displacement of surface plasmon resonance band in the visible region of the absorption spectrum. The appearance of this band is analyzed by considering two different models of the formation of ensembles consisting of gold nanoparticles. By small-angle X-ray scattering we performed structural analysis of phases formed by DNA cholesteric liquid-crystalline dispersion particles treated with gold nanoparticles. As a result of this study it was possible to prove the formation of linear clusters of gold nanoparticles in the “free space” between the adjacent DNA molecules fixed in the quasinematic layers of liquid-crystalline particles. It has been hypothesized that the formation of linear clusters of gold nanoparticles is most likely related to DNA molecules, ordered in the spatial structure of quasinematic layers, and the toxicity of these nanoparticles in biological systems hypothesized.     

SERS Properties of Different Sized and Shaped Gold Nanoparticles Biosynthesized under Different Environmental Conditions by Neurospora crassa Extract

Surface-enhanced Raman scattering (SERS) is a surface-sensitive technique that enhances Raman scattering by molecules adsorbed on rough metal surfaces. It is known that metal nanoparticles, especially gold and silver nanoparticles, exhibit great SERS properties, which make them very attractive for the development of biosensors and biocatalysts. On the other hand, the development of ecofriendly methods for the synthesis of metallic nanostructures has become the focus of research in several countries, and many microorganisms and plants have already been used to biosynthesize metallic nanostructures. However, the majority of these are pathogenic to plants or humans. Here, we report gold nanoparticles with good SERS properties, biosynthesized by Neurospora crassa extract under different environmental conditions, increasing Raman signals up to 40 times using methylene blue as a target molecule. Incubation of tetrachloroauric acid solution with the fungal extract at 60°C and a pH value of a) 3, b) 5.5, and c) 10 resulted in the formation of gold nanoparticles of a) different shapes like triangles, hexagons, pentagons etc. in a broad size range of about 10-200 nm, b) mostly quasi-spheres with some different shapes in a main size range of 6-23 nm, and c) only quasi-spheres of 3-12 nm. Analyses included TEM, HRTEM, and EDS in order to corroborate the shape and the elemental character of the gold nanoparticles, respectively. The results presented here show that these ‘green’ synthesized gold nanoparticles might have potential applicability in the field of biological sensing.     

Biological synthesis of gold nanowires using extract of Rhodopseudomonas capsulata

An environmentally friendly method using a cell-free extract (CFE) of Rhodopseudomonas capsulata is proposed to synthesize gold nanowires with a network structure. This procedure offers control over the shapes of gold nanoparticles with the change of HAuCl4 concentration. The CFE solutions were added with different concentrations of HAuCl4, resulting in the bioreduction of gold ions and biosynthesis of morphologies of gold nanostructures. It is probable that proteins acted as the major biomolecules involved in the bioreduction and synthesis of gold nanoparticles. At a lower concentration of gold ions, exclusively spherical gold nanoparticles with sizes ranging from 10 to 20 nm were produced, whereas gold nanowires with a network structure formed at the higher concentration of gold ions in the aqueous solution. This method is expected to be applicable to the synthesis of other metallic nanowires such as silver and platinum, and even other anisotropic metal nanostructures are expected using the biosynthetic methods.     

金纳米微粒辅助细胞激光热作用疗法研究

金纳米微粒对可见光的强吸收特性使得光能可以高效地转换为热能.由于金纳米微粒的尺度在几十纳米范围,并且很容易与其他生物体结合,因此可以在局部范围进行激光选择性加热,这非常适合作为分子或细胞的靶向.采用这种金纳米微粒辅助激光热作用方法,对牛肠碱性磷酸酯酶(alkaline phosphatase aP)的选择性破坏,细胞膜的通透性提高以及对细胞的选择性灭活进行了试验并得到了很好的结果.此外,还讨论了用这种方法进行基因转染以及选择性光热治疗一些疾病的可能性.     

基于纳米金的比色分析法在核酸检测中的应用

随着纳米技术的发展,运用纳米粒子检测核酸成为研究的热点.在众多检测方法中,基于纳米金的比色分析法操作较为简便,只需普通光学仪器甚至肉眼即可观察结果,从而表现出广阔的市场及临床应用前景.基于纳米金的比色分析法有多种,不同检测原理的方法在灵敏度和实用性上存在差异.根据纳米金是否经寡核苷酸探针修饰可将其分为基于功能化纳米金的比色分析法和基于未功能化纳米金的比色分析法,前者又分为利用纳米金颜色变化的聚集反应体系以及利用纳米金特殊氧化-还原能力的银染增强体系.     

Macrophomina phaseolina: microbased biorefinery for gold nanoparticle production

Biofabrication of nanoparticles via the principles of green nanotechnology is a key issue addressed in nanobiotechnology research. There is a growing need for development of a synthesis method for producing biocompatible stable nanoparticles in order to avoid adverse effects in medical applications. We report the use of simple and rapid biosynthesis method for the preparation of gold nanoparticles using Macrophomina phaseolina (Tassi) Goid, a soil-borne pathogen. The effect of pH and temperature on the synthesis of gold nanoparticles by M. phaseolina was also assessed. Different techniques like UV-Visible Spectroscopy, Transmission Electron Microscopy (TEM), Dynamic light scattering (DLS) measurements, Fourier transform infrared (FTIR), and EDX were used to characterize the gold nanoparticles. The movement of these gold nanoparticles inside Escherichia coli (ATCC11103) along with effect on growth and viability was evaluated. The biogenic gold nanoparticle was synthesized at 37 °C temperature and neutral pH. UV-Visible Spectroscopy, TEM, EDX, and DLS measurements confirm the formation of 14 to 16 nm biogenic gold nanoparticles. FTIR substantiates the presence of protein capping on Macrophomina phaseolina-mediated gold nanoparticles. The non-toxicity of gold nanoparticles was confirmed by the growth and viability assay while the TEM images validated the entry of gold nanoparticles without disrupting the structural integrity of E. coli. Biogenic method for the synthesis of nanoparticles using fungi is novel, efficient, without toxic chemicals. These biogenic gold nanoparticles themselves are nontoxic to the microbial cells and offer a better substitute for drug delivery system.

     

Green synthesis of gold nanoparticles with Zingiber officinale extract: Characterization and blood compatibility

Biosynthesis of gold nanoparticles with small size and biostability is very important and used in various biomedical applications. There are lot of reports for the synthesis of gold nanoparticles by the addition of reducing agent and stabilizing agent. In the present study we have synthesized gold nanoparticles, with a particle size ranging from 5 to 15 nm, using Zingiber officinale extract which acts both as reducing and stabilizing agent. Z. officinale extract is reported to be a more potent anti-platelet agent than aspirin. Therefore, green synthesis of gold nanoparticles with Z. officinale extract, as an alternative to chemical synthesis, is beneficial from its biological and medical applications point of view, because of its good blood biocompatibility and physiological stability. The formation and size distribution of gold nanoparticles were confirmed by dynamic light scattering (DLS), UV–vis spectrophotometer and transmission electron microscopy (TEM). Gold nanoparticles synthesized using citrate and Z. officinale extract demonstrated very low protein adsorption. Both nanoparticles were non platelet activating and non complement activating on contact with whole human blood. They also did not aggregate other blood cells, however, nanoparticles synthesised with Z. officinale extract was highly stable at physiological condition compared to citrate capped nanoparticles, which aggregated. Thus the usage of nanoparticles, synthesized with Z. officinale extract, as vectors for the applications in drug delivery, gene delivery or as biosensors, where a direct contact with blood occurs is justified.     

Involvement of chromosomally-encoded genes in malathion utilization by Pseudomonas aeruginosa AA112

Malathion is an organophosphate insecticide that has been widely used for both domestic and commercial agricultural purposes. However, malathion has the potential to produce toxic effects in mammalian systems. In this study, Pseudomonas aeruginosa AA 112 which was isolated from soil using enrichment technique could utilize the malathion as a sole carbon source and a source of energy. Pseudomonas aeruginosa AA112 was able to grow in MSMPY medium containing 42.75 mg/ml malathion. However, the optimum concentration of malathion which supported the maximum bacterial growth was found to be 22. 8 mg/ml. Malathion was used as an initial source of energy and carbon when it was found without additional carbon sources (in MSM medium) while it was utilized as second source of energy and carbon in a nutrient-supplemented medium (in MSMPY medium). Moreover, lead acetate test indicated that malathion was first attacked at a sulphur site 1-2 hours after the start of incubation. TLC and IR analysis indicated that malathion was completely degraded into diethyl succinate, hydrogen sulphide and phosphates. Therefore a malathion degradation pathway was proporsed. The degradation of malathion is attributed to the genes located on the chromosome and at least three proteins of high molecular size might be involved in malathion utilization. Bacteria able to use malathion as a food source or metabolize its residues in the environment to inactive, less toxic, and harmless compounds, could be used in bioremediation of an environmental pollution caused by the pesticide.     

Enhanced oligonucleotide-nanoparticle conjugate stability using thioctic acid modified oligonucleotides

Metallic nanoparticles of gold functionalized with oligonucleotides conventionally use a terminal thiol modification and have been used in a wide range of applications. Although readily available, the oligonucleotide–nanoparticle conjugates prepared in this way suffer from a lack of stability when exposed to a variety of small molecules or elevated temperatures. If silver is used in place of gold then this lack of stability is even more pronounced. In this study we report the synthesis of highly stabilized oligonucleotide–nanoparticle conjugates using a simple oligonucleotide modification. A modified solid support was used to generate 3′-thioctic acid modified oligonucleotides by treatment with an N-hydroxysuccimidyl ester of thioctic acid. Unusually, both gold and silver nanoparticles have been investigated in this study and show that these disulphide-modified oligonucleotide probes offer significant improvements in nanoparticle stability when treated with dithiothreitol (DTT) compared with monothiol analogues. This is a significant advance in oligonucleotide–nanoparticle conjugate stability and for the first time allows silver nanoparticles to be prepared that are more stable than standard gold-thiol functionalized nanoparticles. This opens up the possibility of using silver nanoparticles functionalized with oligonucleotides as an alternative to gold.     

Investigating the Toxicity,Uptake, Nanoparticle Formation and Genetic Response of Plants to Gold

We have studied the physiological and genetic responses of Arabidopsis thaliana L. (Arabidopsis) to gold. The root lengths of Arabidopsis seedlings grown on nutrient agar plates containing 100 mg/L gold were reduced by 75%. Oxidized gold was subsequently found in roots and shoots of these plants, but gold nanoparticles (reduced gold) were only observed in the root tissues. We used a microarray-based study to monitor the expression of candidate genes involved in metal uptake and transport in Arabidopsis upon gold exposure. There was up-regulation of genes involved in plant stress response such as glutathione transferases, cytochromes P450, glucosyl transferases and peroxidases. In parallel, our data show the significant down-regulation of a discreet number of genes encoding proteins involved in the transport of copper, cadmium, iron and nickel ions, along with aquaporins, which bind to gold. We used Medicago sativa L. (alfalfa) to study nanoparticle uptake from hydroponic culture using ionic gold as a non-nanoparticle control and concluded that nanoparticles between 5 and 100 nm in diameter are not directly accumulated by plants. Gold nanoparticles were only observed in plants exposed to ionic gold in solution. Together, we believe our results imply that gold is taken up by the plant predominantly as an ionic form, and that plants respond to gold exposure by up-regulating genes for plant stress and down-regulating specific metal transporters to reduce gold uptake.     

Effects of a commercial malathion dip preparation on the cellular and humoral immune response of BALB/c mice

Because of the widespread use of malathion as a treatment for ectoparasitism, a study was undertaken to determine the effects of a malathion dip preparation on the BALB/c mouse immune system. Mice were treated with either 2% (recommended dosage) or 8% solutions of malathion or a water control. The cellular immune response was evaluated by in vitro exposure of lymphocytes to mitogens, and the humoral immune response was assessed by using an enzyme-linked immunosorbent assay (ELISA) to quantify antibody production against sheep red blood cells (SRBC). Responses to the mitogens and to the SRBC were not significantly different between 2% and 8% malathion treated and water treated mice. Results indicated that malathion did not affect these two aspects of the mouse immune system when used as a 2% or 8% dipping solution.