Demineralization of crab shell waste by Pseudomonas aeruginosa F722

Crab shell (CS) waste samples (particle size 3–10 and 20–35 mm) were inoculated with the newly isolated Pseudomonas aeruginosa F722 to study the efficiency of microbial demineralization (DM) and deproteinization (DP) in the process of extracting chitin. The inoculated waste was incubated for 7 days at 25, 30 and 35 °C. Various concentrations of glucose were supplemented as carbon source. At the optimal temperature of 30 °C, DM was 92% and DP was 63% DP, whereas the pH dropped from initial pH 8.0 to 4.1. In comparative experiments with different amounts of CS waste, 5% CS waste treatment was shown to be the optimal amount for efficient DM. A positive relationship is correlated between DM and glucose concentration (r² = 0.821), whereas a negative relationship is correlated between DM and pH (r² = 0.793). DP and protease activity were little affected by different crab shell sizes.     

Mathematical modeling of Microcystis aeruginosa growth and [D-Leu1] microcystin-LR production in culture media at different temperatures

The effect of temperature (26 °C, 28 °C, 30 °C and 35 °C) on the growth of native CAAT-3-2005 Microcystis aeruginosa and the production of Chlorophyll-a (Chl-a) and Microcystin-LR (MC-LR) were examined through laboratory studies. Kinetic parameters such as specific growth rate (μ), lag phase duration (LPD) and maximum population density (MPD) were determined by fitting the modified Gompertz equation to the M. aeruginosa strain cell count (cells mL⁻¹). A 4.8-fold increase in μ values and a 10.8-fold decrease in the LPD values were found for M. aeruginosa growth when the temperature changed from 15 °C to 35 °C. The activation energy of the specific growth rate (Eμ) and of the adaptation rate (E₁/LPD) were significantly correlated (R² = 0.86). The cardinal temperatures estimated by the modified Ratkowsky model were minimum temperature = 8.58 ± 2.34 °C, maximum temperature = 45.04 ± 1.35 °C and optimum temperature = 33.39 ± 0.55 °C.Maximum MC-LR production decreased 9.5-fold when the temperature was increased from 26 °C to 35 °C. The maximum production values were obtained at 26° C and the maximum depletion rate of intracellular MC-LR was observed at 30–35 °C. The MC-LR cell quota was higher at 26 and 28 °C (83 and 80 fg cell⁻¹, respectively) and the MC-LR Chl-a quota was similar at all the different temperatures (0.5–1.5 fg ng⁻¹).The Gompertz equation and dynamic model were found to be the most appropriate approaches to calculate M. aeruginosa growth and production of MC-LR, respectively. Given that toxin production decreased with increasing temperatures but growth increased, this study demonstrates that growth and toxin production processes are uncoupled in M. aeruginosa. These data and models may be useful to predict M. aeruginosa bloom formation in the environment.     

Purification and characterization of an organic solvent-tolerant lipase from Pseudomonas aeruginosa LX1 and its application for biodiesel production

An organic solvent-tolerant lipase from newly isolated Pseudomonas aeruginosa LX1 has been purified by ammonium sulfate precipitation and ion-exchange chromatography leading to 4.3-fold purification and 41.1% recovery. The purified lipase from P. aeruginosa LX1 was homogeneous as determined by SDS-PAGE, and the molecular mass was estimated to be 56 kDa. The optimum pH and temperature for lipase activity were found to be 7.0 and 40 °C, respectively. The lipase was stable in the pH range 4.5–12.0 and at temperatures below 50 °C. Its hydrolytic activity was found to be highest towards p-nitrophenyl palmitate (C16) among the various p-nitrophenol esters investigated. The lipase displayed higher stability in the presence of various organic solvents, such as n-hexadecane, isooctane, n-hexane, DMSO, and DMF, than in the absence of an organic solvent. The immobilized lipase was more stable in the presence of n-hexadecane, tert-butanol, and acetonitrile. The transesterification activity of the lipase from P. aeruginosa LX1 indicated that it is a potential biocatalyst for biodiesel production.     

Production and characterization of homopolymer polyhydroxyheptanoate (P3HHp) by a fadBA knockout mutant Pseudomonas putida KTOY06 derived from P. putida KT2442

Pseudomonas putida KT2442 commonly produces medium-chain-length polyhydroxyalkanoates (PHA) consisting of 3-hydroxyhexanoate (C6) to 3-hydroxydodecanoate (C12) when grown in glucose or even number fatty acid. When two of the beta-oxidation genes fadBA were deleted, the P. pudida KT2442 mutant named KTOY06 accumulated a homopolymer of poly-3-hydroxyheptanoate (P3HHp) up to 71 wt% of its cell dry weight in the presence of heptanoate as a single carbon source. P3HHp contents in the cell dry weight were in direct proportional to Na-heptanoate concentration up to 10 g/L. In contrast, under the same cultivation conditions, the wild type P. putida KT2442 produced a copolymer consisting of 3-hydroxyheptanoate (3HHp) and 5.3–8.4 mol% 3-hydroxynonanoate (3HN). Gas chromatography (GC), nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and gel permeation chromatography (GPC) were used to characterize the homopolymer P3HHp, respectively. It was found that the P3HHp with an average molecular weight of 455 kDa was a completely amorphous homopolymer without crystallinity. P3HHp is thermo-degradable at around 250 °C.     

Formulation of Pseudomonas chlororaphis strains for improved shelf life

Formulations of Pseudomonas strains with long-term shelf life are needed for commercial use in biological disease control and growth promotion in crops. In the present work Pseudomonas chlororaphis (Pc) 63-28 formulated with coconut fiber [moisture content (MC) of 80%], talc (MC 8%) or peat (MC 40%), with or without the addition of carboxymethylcellulose or xanthan gum, and formulations of Pc 63-28 and P. chlororaphis TX-1 in coconut fiber with water contents (v:v) of 75%, 45%, and 25%, were evaluated in terms of shelf life and cell viability. The shelf life of Pc 63-28 was longer when formulated in coconut fibre with a MC was 80% than in the other formulations and longer at 3 ± 1 °C compared to 22 ± 1 °C. Densities of viable Pc 63-28 cells in coconut fiber stored at 3 ± 1 °C did not decline significantly during 224 days when the MC was 80% and within 120 days at 75% MC. Densities of Pc TX-1 in coconut fiber of 75% MC did not decline within 60 days at 3 ± 1 °C. P. chlororaphis 63-28 survived longer in deionized water and buffer than in canola oil. Cells of Pc 63-28 cells formulated in coconut fibre of 80% MC after storage for 140 days at 3 ± 1 °C in coconut fiber improved hydroponic growth of hydroponic lettuce and better than cells freshly recovered from culture. We conclude that coconut fiber is a carrier of superior performance in maintaining shelf life of Pseudomonas strains. The observed shelf life would be sufficient for practical use of Pseudomonas strains as tools for disease control and growth promotion in crops.     

Temperature-dependent development of overwintering Sericinus montela Gray (Lepidoptera: Papilionidae) pupae and its validation

The developmental time and survival of overwintering Sericinus montela Gray pupae were studied at four constant temperatures (15.0, 20.0, 25.0, and 30.0 °C), 40 ± 10% relative humidity, and 10:14 h light:dark cycle. The developmental time of both sexes decreased with increasing temperature between 15.0 °C (70.18 days for females and 55.28 days for males) and 30.0 °C (19.60 days for females and 13.78 days for males). The development periods of females were longer than those of males at each constant temperature. The relationship between the developmental rate and temperature was fitted by a linear model and a nonlinear developmental rate model (Lactin 1). The mortality of overwintered S. montela pupae was lowest at 25.0 °C (16.7%) and highest at 15.0 °C (36.7%). The lower developmental thresholds were 12.38 and 12.16 °C for females and males, respectively. The distribution of development completion for females and males was described by the two-parameter Weibull distribution equation (r² = 0.87 for females and r² = 0.94 for males). The date for the cumulative 50% adult emergence was within one or two days of that predicted using the Lactin 1 model. The temperature-dependent developmental model for S. montela could be applied to predict the timing of spring emergence in different geographical locations and will be helpful in developing a full-cycle phenology model for S. montela.     

Parameter estimation for a temperature-dependent development model of Thrips palmi Karny (Thysanoptera: Thripidae)

Development of immature Thrips palmi Karny was investigated at 12.5, 15, 17.5, 20, 22.5, 25, 27.5, 30, 32.5, and 35 °C, 20–40% RH and a photoperiod of 14:10 (L:D) h. Developmental time decreased with increasing temperature up to 32.5 °C in all stages. The total developmental time was longest at 12.5 °C (64.2 days) and shortest at 32.5 °C (9.2 days). The lower developmental threshold was 10.6, 10.6, 9.1, and 10.7 °C for egg, larva, prepupa, and pupa, respectively. The thermal constant required to complete the respective stage was 71.7, 59.2, 18.1, and 36.8DD. The lower threshold temperature and thermal constant were 10.6 °C and 183.3DD, respectively, for total immature development. The nonlinear relationship between developmental rate and temperature was well described by the modified Sharpe and DeMichele biophysical model (r² = 0.905–0.998). The distribution of developmental completion of each stage was described by the 3-parameter Weibull function (r² = 0.855–0.927). The temperature-dependent developmental models of T. palmi developed in this study could be used to predict its seasonal phenology in field and greenhouse vegetable crops.     

Cloning,expression, characterisation and mutational analysis of l-aspartate oxidase from Pseudomonas putida

l-Amino acid oxidases (LAAOs) are useful catalysts for the deracemisation of racemic amino acid substrates when combined with abiotic reductants. The gene nadB encoding the l-aspartate amino acid oxidase from Pseudomonas putida (PpLASPO) has been cloned and expressed in E. coli. The purified PpLASPO enzyme displayed a K_M for l-aspartic acid of 2.26 mM and a k_cat = 10.6 s⁻¹, with lower activity also displayed towards l-asparagine, for which pronounced substrate inhibition was also observed. The pH optimum of the enzyme was recorded at pH 7.4. The enzyme was stable for 60 min at up to 40 °C, but rapid losses in activity were observed at 50 °C. A mutational analysis of the enzyme, based on its sequence homology with the LASPO from E. coli of known structure, appeared to confirm roles in substrate binding or catalysis for residues His244, His351, Arg386 and Arg290 and also for Thr259 and Gln242. The high activity of the enzyme, and its promiscuous acceptance of both l-asparagine and l-glutamate as substrates, if with low activity, suggests that PpLASPO may provide a good model enzyme for evolution studies towards AAOs of altered or improved properties in the future.     

Oviposition model of Cnaphalocrocis medinalis Guenée (Lepidoptera: Pyralidae)

The longevity and fecundity of Cnaphalocrocis medinalis were investigated at temperatures of 15.0, 17.5, 20.0, 22.5, 25.0, 27.5, 30.0, 32.5, and 35.0 °C. Adult longevity and fecundity were significantly influenced by temperature. Longevity decreased with increasing temperature: it was highest at 15.0 °C (23.6 ± 3.51 days) and lowest at 35.0 °C (6.4 ± 0.48 days). Fecundity was highest at 25.0 °C (170.5 ± 45.54 eggs) and lowest at 17.5 °C (11.0 ± 3.68 eggs). The oviposition period was longest at 20.0 °C (8.0 ± 1.09 days) and shortest at 35.0 °C (2.3 ± 0.48 days). The oviposition model presented in this study consisted of two reproductive components (total fecundity and age-specific cumulative oviposition rate) and a survival component (age-specific survival rate). The relationship between adult developmental rate and temperature was described by the Lactin 2 model (r² = 0.98, p < 0.0001). The age-specific survival rate was well explained by a sigmoid function (r² = 0.97, p < 0.00001). The age-specific cumulative oviposition rate was best described by the three-parameter Weibull function (r² = 0.99, p < 0.00001). Temperature-dependent fecundity was estimated using the Briere-2 model (r² = 0.94, p < 0.007). Daily egg production of C. medinalis in relation to adult age and temperature was estimated.     

Comparative assessment of in situ bioremediation potential of cadmium resistant acidophilic Pseudomonas putida 62BN and alkalophilic Pseudomonas monteilli 97AN strains on soybean

A study was undertaken to examine the effects of the acidophilic strain 62BN (pH 5.5) and alkalophilic strain 97AN (pH 9.0) on remediation of cadmium and their subsequent effects on soybean (Glycine max var. PS-1347) in acidic and alkaline soils, respectively. The effect of cadmium on soybean plants was studied in acidic (pH 6.3 ± 0.2) and alkaline (8.5 ± 0.2) soil amended with 124 μM CdCl₂ concentration, respectively, and the cadmium toxicity was evident from stunted growth, poor rooting, and cadmium accumulation in each case. Furthermore, 16S ribosomal DNA (rDNA) sequencing identified 62BN as a Pseudomonas putida strain and 97AN as a Pseudomonas monteilli strain. In situ studies showed that on seed bacterization, both the P. putida 62BN strain and P. monteilli 97AN strain were able to enhance plant growth in terms of agronomical parameters, in the presence of cadmium in acidic and alkaline soils, respectively. Apart from this, strain 62BN and 97AN reduced cadmium concentration in plant and soil significantly (p < 0.05) in their respective soil types. Further comparative analysis revealed that P. putida 62BN was more effective than P. monteilli 97AN strain in remediation of cadmium. The bacterial strains offer promise as inoculants to improve the growth of plants in the presence of toxic Cd concentrations in the environment with their optimum pH.     

Evaluation of distant carbon sources in biosurfactant production by a gamma ray-induced Pseudomonas putida mutant

Pseudomonas putida 33 wild strain, subjected to gamma ray mutagenesis and designated as P. putida 300-B mutant was used as microbial rhamnolipid-producer by using distant carbon sources (viz. hydrocarbons, waste frying oils ‘WFOs’, vegetable oil refinery wastes and molasses) in the minimal media under shake flask conditions. The behavior of glucose as co-substrate and growth initiator was examined. The 300-B mutant strain showed its ability to grow on all the substrates tested and produced rhamnolipid surfactants to different extents however; soybean and corn WFOs were observed to be preferred carbon sources followed by kerosene and paraffin oils, respectively. The best cell biomass (3.5 g l⁻¹) and rhamnolipids yield (4.1 g l⁻¹) were obtained with soybean WFO as carbon source and glucose as growth initiator under fed-batch cultivation showing an optimum specific growth rate (μ) of 0.272 h⁻¹, specific product yield (q_p) of 0.318 g g⁻¹ h and volumetric productivity (P_V) of 0.024 g l⁻¹ h. The critical micelle concentration of its culture supernatant was observed to be 91 mg rhamnolipids l⁻¹ and surface tension as 31.2 mN m⁻¹.     

Temperature-dependent development of Cnaphalocrocis medinalis Guenée (Lepidoptera: Pyralidae) and their validation in semi-field condition

The developmental time and survival of the immature stages of Cnaphalocrocis medinalis Guenée were studied at nine constant temperatures (15, 17.5, 20, 22.5, 25, 27.5, 30, 32.5, and 35 °C), 40 ± 10% relative humidity, and a 16:8 h light:dark cycle. The total developmental time decreased with increasing temperature between 15 (115.6 days) and 32.5 °C (20.9 days), but increased above 32.5 °C. The relationship between the developmental rate and temperature was fitted by a linear model and three nonlinear developmental rate models (Logan 6, Briere 1, and Shi et al.). The nonlinear shape of temperature-dependent development was best described by the Briere 1 model (r² = 0.99), and this was supported by statistical information criteria. The total mortality of immature C. medinalis was lowest at 25 °C (67.2%) and highest at 35 °C (98.1%). The distribution of the developmental times of each stage was described by the two-parameter Weibull distribution equation (r² = 0.84–0.96). The predicted date for the cumulative 50% moth emergence was within a variation of one day using the Briere 1 model. The temperature-dependent developmental models for C. medinalis could be applied to determine an optimal management strategy for C. medinalis in paddy fields, and will be helpful in developing a full-cycle phenology model for C. medinalis.     

Development of an immunochromatographic assay for diagnosing the production of IMP-type metallo-β-lactamases that mediate carbapenem resistance in Pseudomonas

Rapid and reliable detection of carbapenem-resistant bacteria is an important infection-control measure and a crucial aspect of antimicrobial chemotherapy. IMP-type metallo-β-lactamase (MBL) is an emzyme that mediate carbapenem resistance in bacteria. Here, an immunochromatographic assay was newly developed using novel monoclonal antibodies (mAbs) recognizing IMP-type MBL. Epitope mapping of mAbs and mutational analysis of the epitope region in IMP antigen suggested that the mAbs could react to all known subtypes of IMP-type MBL. Evaluation of the assay using Pseudomonas aeruginosa strains (n = 248) showed that the results of the immunochromatographic detection of the IMP-type MBLs were fully consistent with those of the PCR analysis for bla_IMP genes, showing false positives and negatives. All positive strains were resistant to carbapenem (MIC ≥ 16 μg/ml). The assay also accurately distinguished the production of IMP-type MBLs in Pseudomonas putida, Acinetobacter baumannii, and Alcaligenes xylosoxidans. The detection limit of the assay was 5.7 × 10⁴ cfu per test. Taken together, these data suggest that the developed assay can be used for rapid and reliable diagnosis of the production of IMP-type MBLs in Gram-negative bacteria.     

Integrated bioprocess for the oxidation of limonene to perillic acid with Pseudomonas putida DSM 12264

An efficient integrated bioprocess for the oxidation of limonene to perillic acid with Pseudomonas putida DSM 12264 was developed. Perillic acid is a promising candidate for natural preservation and pharmaceutical application. At elevated concentrations the monoterpenoic acid inhibits growth and biotransformation activity of P. putida DSM 12264. The maximum growth rate showed a linear decrease from μ = 1.43 h^?1 in the absence of perillic acid to complete inhibition at 165 ± 7 mM perillic acid. The maximum specific activity of limonene-transforming resting cells revealed an exponential decrease from almost 8 U/g cdw without perillic acid to <0.5 U/g cdw at >25 mM perillic acid. A method for in situ product recovery (ISPR) based on anion exchange resin was established to overcome product inhibition. A column containing a fluidized bed of Amberlite IRA 410 Cl was coupled to the bioreactor and enabled product removal by continuously recirculating the unfiltered broth through the ISPR unit. This led to a cumulative perillic acid concentration of 187 mM (31 g/L) after 7 days, which represents the highest product concentration achieved in a microbial monoterpene oxyfunctionalization so far. The ISPR approach reduced the further downstream processing steps needed which yielded a 93% pure product with a loss of 2%.     

Production of two monomer structures containing medium-chain-length polyhydroxyalkanoates by β-oxidation-impaired mutant of Pseudomonas putida KT2442

Pseudomonas putida KT2442 produces medium-chain-length (MCL) polyhydroxyalkanoates (PHA) from fatty acids. When gene encoding 3-hydroxyacyl-CoA dehydrogenase which catalyzes long-chain-3-hydroxyacyl-CoA to 3-ketoacyl-CoA, was partially or completely deleted in P. putida KTOY08, the PHA accumulated was shown to contain only two different monomer structures dominated by a monomer of the same chain length as that of the fatty acids fed and another monomer two carbon atoms shorter. Among the PHA copolymers, P(44% 3HD-co-3HDD) containing 44% 3HD and 56% 3HDD was demonstrated to have a melting temperature T_m, an apparent heat of fusion △H_m and a Young’s modulus E of 75 °C, 51 J g^?1 and 2.0 MPa, respectively, the highest among all the MCL PHA studied.     

Toxic and non-toxic strains of Microcystis aeruginosa induce temperature dependent allelopathy toward growth and photosynthesis of Chlorella vulgaris

Global warming was believed to accelerate the expansion of cyanobacterial blooms. However, the impact of changes due to the allelopathic effects of cyanobacterial blooms with or without algal toxin production on the ecophysiology of its coexisting phytoplankton species arising from global warming were unknown until recently. In this study, the allelopathic effects of toxic and non-toxic Microcystis aeruginosa strains on the growth of green alga Chlorella vulgaris and photosynthesis of the co-cultivations of C. vulgaris and toxic M. aeruginosa FACHB-905 or non-toxic M. aeruginosa FACHB-469 were investigated at different temperatures. The growth of C. vulgaris, co-cultured with the toxic or non-toxic M. aeruginosa strains, was promoted at 20 °C but inhibited at temperatures ≥25 °C. The inhibitory effects of the toxic and non-toxic M. aeruginosa strains on of the co-cultivations (C. vulgaris and non-toxic M. aeruginosa FACHB-469 or toxic M. aeruginosa FACHB-905) also linearly increased with elevated temperatures. Furthermore, toxic M. aeruginosa FACHB-905 induced more inhibition toward growth of C. vulgaris or P_max and R_d of the mixtures than non-toxic M. aeruginosa FACHB-469. C. vulgaris dominated over non-toxic M. aeruginosa FACHB-469 but toxic M. aeruginosa FACHB-905 overcame C. vulgaris when they were co-cultured in mesocosms in water temperatures from 20 to 25 °C. The results indicate that allelopathic effects of M. aeruginosa strains on C. vulgaris are both temperature- and species-dependent: it was stimulative for C. vulgaris at low temperatures such as 20 °C, but inhibitory at high temperatures (≥25 °C); the toxic strain was determined to be more harmful to C. vulgaris than the non-toxic one. This suggests that global warming may aggravate the ecological risk of cyanobacteria blooms, especially those with toxic species as the main contributors.     

A mutualistic interaction between the bacterium Pseudomonas asplenii and the harmful algal species Chattonella marina (Raphidophyceae)

Several studies on various Chattonella species have reported that bacteria may play an important role in Chattonella bloom initiation, however, no studies have described how these bacteria promote the growth of C. marina. The interaction between C. marina and bacteria was investigated for identification and characterization of potential growth-promoting bacteria. In preliminary tests, the growth promoting effect of Pseudomonas species (25 strains) was investigated and P. asplenii (≥2.27) was determined as a growth-promoting bacteria for both C. marina strains (CCMP 2049 and 2050). This bacterium exerted optimal growth-promoting effects on C. marina, causing an increase in the initial density of P. asplenii to approximately 1 × 10⁷ cells mL⁻¹, which was used as the initial density in this study. To determine whether the growth-promoting activity was direct or indirect, P. asplenii was incubated in the algal media and then a filtrate of this culture was added to both C. marina strains. The P. asplenii filtrate stimulated the growth of C. marina and maintained the growth-promoting effects after high temperature (121 °C for 20 min) and pressure (15 psi) treatment. Thus, P. asplenii is able to promote C. marina growth through the release of a heat-resistant substance, such as inorganic nutrients. A nutrient analysis indicated that this bacterium elevated the phosphate concentration. Interestingly, P. asplenii was unable to survive in phosphate-limited media but could grow in phosphate-limited media incubating C. marina. Moreover, this bacterium could secrete significantly more phosphate in the presence of C. marina (p < 0.0001). These results suggested that P. asplenii and C. marina may have a mutualistic interaction.     

Biocontrol of major postharvest pathogens on apple using Rhodotorula glutinis and its effects on postharvest quality parameters

The biocontrol activity of Rhodotorula glutinis on gray mold decay and blue mold decay of apple caused by Botrytis cinerea and Penicillium expansum, respectively, was investigated, as well as its effects on postharvest quality of apple fruits. The results show there was a significant negative correlation between concentrations of the yeast cells and the disease incidence of the pathogens. The higher concentration of the R. glutinis, the better effect of the biocontrol capacity. At concentrations of R. glutinis 1 × 10⁸ CFU ml^?1, the amount of gray mold decay was completely inhibited after 5 days incubation at 20 °C, after challenge with B. cinerea spores suspension of 1 × 10⁵ spores ml^?1; While the blue mold decay was completely inhibited at concentrations of 5 × 10⁸ CFU ml^?1, at challenged with P. expansum spores suspension of 5 × 10⁴ spores ml^?1_. These results demonstrated that the efficacy of R. glutinis in controlling of gray mold decay of apples was better than the efficacy of controlling blue mold. R. glutinis within inoculated wounds on apples increased in numbers at 20 °C from an initial level of 9.5 × 10⁵ CFU per wound to 2.24 × 10⁷ CFU at 20 °C after 1 day. The highest population of the yeast was recovered 4 days after inoculation, the yeast population in wounds increased by 56.9 times. After that, the population of the yeast began to decline very slowly. R. glutinis significantly reduced the incidence of natural infections on intact fruit from 75% in the control fruit to 28.3% after 5 days at 20 °C, and from 58.3 to 6.7% after 30 days at 4 °C followed by 4 days at 20 °C. R. glutinis treatment had no deleterious effect on quality parameters after 5 days at 20 °C or after 30 days at 4 °C followed by 4 days at 20 °C.     

Comparison between ambulatory measurement of effective thermal conductivity and laser Doppler flowmetry method to assess skin microcirculatory activity

The main objective of this paper was to assess the performance of the ambulatory device μHematron to measure indirectly skin blood flow relative to the well-established Laser Doppler flowmetry method. The μHematron device is dedicated to the non-invasive measurement of effective thermal conductivity of living tissues, based on the thermal clearance method. Its major advantage is its ambulatory functionality, as available methods for evaluation of microcirculatory activity are non-ambulatory methods. An experiment was conducted on ten healthy women exposed for one hour in three different thermal environments (22 °C, 25 °C and 30 °C). Skin microcirculatory activity was analyzed after an acclimatization period of 30 minutes. The time between each exposure was at least one hour. Performances of the μHematron device were assessed and a comparative study with a laser Doppler perfusion monitor (LDPM) was performed. Good correlation coefficients between the two devices (r = 0.71 at T1 = 22 °C, r = 0.77 at T2 = 25 °C and r = 0.83 at T3 = 30 °C) were obtained while the LDPM signal was filtered by a low pass filter (0.1 Hz). These results showed that continuous monitoring of effective thermal conductivity was possible in neutral and warm ambiences. Then, the μHematron device could be considered as a complementary tool to Doppler techniques for the investigation of skin blood flow, when ambulatory conditions are required.