Molecular mapping and candidate gene analysis of a new epicuticular wax locus in sorghum (<Emphasis Type="Italic">Sorghum bicolor</Emphasis> L. Moench)

Key message

A new epicuticular wax (bloom) locus has been identified and fine mapped to the 207.89 kb genomic region on chromosome 1. A putative candidate gene, Sobic.001G269200, annotated as GDSL-like lipase/acylhydrolase, is proposed as the most probable candidate gene involved in bloom synthesis/deposition.

Abstract

Deposition of epicuticular wax on plant aerial surface is one strategy that plants adapt to reduce non-transpiration water loss. Epicuticular wax (bloom)-less mutants in sorghum with their glossy phenotypes exhibit changes in the accumulation of epicuticular wax on leaf and culm surfaces. We report molecular mapping of a new sorghum locus, bloomless mutant (bm39), involved in epicuticular wax biosynthesis in sorghum. Inheritance studies involving a profusely bloom parent (BTx623) and a spontaneous bloomless mutant (RS647) indicated that the parents differed in a single gene for bloom synthesis. Bloomless was recessive to bloom deposition. Genetic mapping involving F₂ and F₇ mapping populations in diverse genetic backgrounds (BTx623 × RS647; 296A × RS647 and 27A × RS647) identified and validated the map location of bm39 to a region of 207.89 kb on chromosome 1. SSR markers, Sblm13 and Sblm16, flanked the bm39 locus to a map interval of 0.3 cM on either side. Nine candidate genes were identified, of which Sobic.001G269200 annotated for GDSL-like lipase/acylhydrolase is the most likely gene associated with epicuticular wax deposition. Gene expression analysis in parents, isogenic lines and sets of near isogenic lines also confirmed the reduced expression of the putative candidate gene. The study opens possibilities for a detailed molecular analysis of the gene, its role in epicuticular wax synthesis and deposition, and may help to understand its function in moisture stress tolerance and insect and pathogen resistance in sorghum.

     

Molecular mapping of the rf1 gene for pollen fertility restoration in sorghum (Sorghum bicolor L.)

We report the molecular mapping of a gene for pollen fertility in A1 (milo) type cytoplasm of sorghum using AFLP and SSR marker analysis. DNA from an F₂ population comprised of 84 individuals was screened with AFLP genetic markers to detect polymorphic DNAs linked to fertility restoration. Fifteen AFLP markers were linked to fertility restoration from the initial screening with 49 unique AFLP primer combinations (+3/+3 selective bases). As many of these AFLP markers had been previously mapped to a high-density genetic map of sorghum, the target gene (rf1) could be mapped to linkage group H. Confirmation of the map location of rf1 was obtained by demonstrating that additional linkage group-H markers (SSR, STS, AFLP) were linked to fertility restoration. The closest marker, AFLP Xtxa2582, mapped within 2.4 cM of the target loci while two SSRs, Xtxp18 and Xtxp250, flanked the rf1 locus at 12 cM and 10.8 cM, respectively. The availability of molecular markers will facilitate the selection of pollen fertility restoration in sorghum inbred-line development and provide the foundation for map-based gene isolation. Received: 22 August 2000 / Accepted: 18 October 2000     

Chemically Induced Cuticle Mutation Affecting Epidermal Conductance to Water Vapor and Disease Susceptibility in Sorghum bicolor (L.) Moench

Analysis of Sorghum bicolor bloomless (bm) mutants with altered epicuticular wax (EW) structure uncovered a mutation affecting both EW and cuticle deposition. The cuticle of mutant bm-22 was about 60% thinner and approximately one-fifth the weight of the wild-type parent P954035 (WT-P954035) cuticles. Reduced cuticle deposition was associated with increased epidermal conductance to water vapor. The reduction in EW and cuticle deposition increased susceptibility to the fungal pathogen Exserohilum turcicum. Evidence suggests that this recessive mutation occurs at a single locus with pleiotropic effects. The independently occurring gene mutations of bm-2, bm-6, bm-22, and bm-33 are allelic. These chemically induced mutants had essentially identical EW structure, water loss, and cuticle deposition. Furthermore, 138 F2 plants from a bm-22 x WT-P954035 backcross showed no recombination of these traits. This unique mutation in a near-isogenic background provides a useful biological system to examine plant cuticle biosynthesis, physiology, and function.     

An SSR genetic map of Sorghum bicolor (L.) Moench and its comparison to a published genetic map.

Sorghum bicolor (L.) Moench is an important grain and forage crop grown worldwide. We developed a simple sequence repeat (SSR) linkage map for sorghum using 352 publicly available SSR primer pairs and a population of 277 F2 individuals derived from a cross between the Westland A line and PI 550610. A total of 132 SSR loci appeared polymorphic in the mapping population, and 118 SSRs were mapped to 16 linkage groups. These mapped SSR loci were distributed throughout 10 chromosomes of sorghum, and spanned a distance of 997.5 cM. More important, 38 new SSR loci were added to the sorghum genetic map in this study. The mapping result also showed that chromosomes SBI-01, SBI-02, SBI-05, and SBI-06 each had 1 linkage group; the other 6 chromosomes were composed of 2 linkage groups each. Except for 5 closely linked marker flips and 1 locus (Sb6_34), the marker order of this map was collinear to a published sorghum map, and the genetic distances of common marker intervals were similar, with a difference ratio 相似文献   

Genetic mapping of QTLs associated with greenbug resistance and tolerance in Sorghum bicolor

Ninety three recombinant inbreds of Sorghum bicolor (L. Moench) were derived from a cross between two sorghum lines GBIK and Redlan. This population was used to identify quantitative trait loci (QTLs) for resistance and tolerance to greenbug (Schizaphids graminum Rondani) Biotypes I and K. One hundred and thirteen loci (38 SSRs and 75 RAPDs) were mapped in 12 linkage groups covering 1,530 cM. In general, nine QTLs were detected affecting both resistance and tolerance to greenbug (GB) Biotypes I and K. The phenotypic variance explained by each QTL ranged from 5.6% to 38.4%. Four SSRs and one RAPD marker were associated with the expression of all resistance and tolerance traits. These markers appear to be linked to biotype non-specific resistance and tolerance genes. Four additional markers were associated with biotype-specific resistance or tolerance traits. The detection of more than one locus for each biotype supports the hypothesis that several regions, which represent different genes, control the expression of resistance and tolerance to greenbug in sorghum. The results can be used for marker-assisted selection and the breeding of greenbug-tolerant sorghum cultivars.     

Biotechnology: Genetic improvement of sorghum (Sorghum bicolor (L.) Moench)

Summary This report reviews the contributions to the improvement of sorghum (Sorghum bicolor (L.) Moench) through traditional approaches with emphasis on the application of biotechnological methods. Strategies include breeding for higher yield, improved grain quality, and biotic and abiotic stress tolerance. Hybrid development and polyploidy breeding are also discussed. Plant breeders, working in concert with biotechnologists, have developed new powerful tools for plant genetic manipulation and genotype evaluation that will significantly improve the efficiency of plant breeding. Improving sorghum through biotechnology is the latest in a long series of technologies that have been applied to this crop. Five basic tools of technology have been developed for sorghum improvement: (1) in vitro protocols for efficient plant regeneration; (2) molecular markers; (3) gene identification and cloning; (4) genetic engineering and gene transfer technology to integrate desirable traits into the sorghum genome; and (5) genomics and germplasm databases. Reports on studies involving the problems, progress, and prospects for utilizing the biotechnological methods for sorghum improvement are discussed.     

Molecular tagging and validation of microsatellite markers linked to the low germination stimulant gene (<Emphasis Type="Italic">lgs</Emphasis>) for <Emphasis Type="Italic">Striga</Emphasis> resistance in sorghum [<Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.) Moench]

Striga is a devastating parasitic weed in Africa and parts of Asia. Low Striga germination stimulant activity, a well-known resistance mechanism in sorghum, is controlled by a single recessive gene (lgs). Molecular markers linked to the lgs gene can accelerate development of Striga-resistant cultivars. Using a high density linkage map constructed with 367 markers (DArT and SSRs) and an in vitro assay for germination stimulant activity towards Striga asiatica in 354 recombinant inbred lines derived from SRN39 (low stimulant) × Shanqui Red (high stimulant), we precisely tagged and mapped the lgs gene on SBI-05 between two tightly linked microsatellite markers SB3344 and SB3352 at a distance of 0.5 and 1.5 cM, respectively. The fine-mapped lgs region was delimited to a 5.8 cM interval with the closest three markers SB3344, SB3346 and SB3343 positioned at 0.5, 0.7 and 0.9 cM, respectively. We validated tightly linked markers in a set of 23 diverse sorghum accessions, most of which were known to be Striga resistant, by genotyping and phenotyping for germination stimulant activity towards both S. asiatica and S. hermonthica. The markers co-segregated with Striga germination stimulant activity in 21 of the 23 tested lines. The lgs locus similarly affected germination stimulant activity for both Striga species. The identified markers would be useful in marker-assisted selection for introgressing this trait into susceptible sorghum cultivars. Examination of the sorghum genome sequence and comparative analysis with the rice genome suggests some candidate genes in the fine-mapped region (400 kb) that may affect strigolactone biosynthesis or exudation. This work should form a foundation for map-based cloning of the lgs gene and aid in elucidation of an exact mechanism for resistance based on low Striga germination stimulant activity.     

Characterization and gene mapping of a brittle culm mutant of diploid wheat (Triticum monococcum L.) with irregular xylem vessels development

Diploid wheat, Triticum monococcum L. (einkorn) is an ideal plant material for wheat functional genomics. Brittle culm mutant was identified by screening of the ethyl methane sulphonate-treated M ₂ progenies of a T. monococcum accession pau14087 by banding the plant parts manually. The brittle culm mutant with drooping leaves, early flowering, reduced tiller numbers and susceptible to lodging had also exhibited brittleness in all plant parts than the wild-type parents. Comprehensive mechanical strength, histological, biochemical, scanning electron microscopy, and Fourier transform infrared spectroscopy analyses of brittle culm mutant supplemented and complemented the findings that the mutant had defective cellulose biosynthesis pathway and deposition of cell wall materials on secondary cell wall of mechanical tissues. Microscopic studies demonstrated that the decrease in cellulose contents resulted in the irregular cell wall organization in xylem vessels of leaf vascular bundles. To map the brc5 mutant, mapping populations were developed by crossing the brittle culm mutant with wild Triticum boeoticum acc. pau5088, having non-brittle characters. The brittle culm mutation was mapped between SSR markers, Xcfd39 and Xgwm126 on 5A^mL chromosome of T. monococcum, with genetic distances of 2.6 and 4.8 cM, respectively. The brc5 mutant mapped on 5A^mL, being distinct from a previously mapped brittle culm mutant in wheat, has been designated as brc5. The work on fine mapping and map-based cloning of brc5 gene regulating synthesis and deposition of cellulose on the secondary cell wall is in progress.     

Identification and expression analysis of group 3 LEA family genes in sorghum [Sorghum bicolor (L.) Moench]

Sorghum with its remarkable adaptability to drought and high temperature provides a model system for grass genomics and resource for gene discovery especially for abiotic stress tolerance. Group 3 LEA genes from barley and rice have been shown to play crucial role in abiotic stress tolerance. Here, we present a genome-wide analysis of LEA3 genes in sorghum. We identified four genes encoding LEA3 proteins in the sorghum genome and further classified them into LEA3A and LEA3B subgroups based on the conservation of LEA3 specific motifs. Further, expression pattern of these genes were analyzed in seeds during development and vegetative tissues under abiotic stresses. SbLEA3A group genes showed expression at early stage of seed development and increased significantly at maturity, while SbLEA3B group genes expressed only in matured seeds. Expression of SbLEA3 genes in response to abiotic stresses such as soil moisture deficit (drought), osmotic, salt, and temperature stresses, and exogenous ABA treatments was also studied in the leaves of 2-weeks-old seedlings. ABA and drought induced the expression of all LEA3 genes, while cold and heat stress induced none of them. Promoter analysis revealed the presence of multiple ABRE core cis-elements and a few low temperature response (LTRE)/drought responsive (DRE) cis-elements. This study suggests non-redundant function of LEA3 genes in seed development and stress tolerance in sorghum.     

The Inhibitor of wax 1 locus (Iw1) prevents formation of β‐ and OH‐β‐diketones in wheat cuticular waxes and maps to a sub‐cM interval on chromosome arm 2BS

Glaucousness is described as the scattering effect of visible light from wax deposited on the cuticle of plant aerial organs. In wheat, two dominant genes lead to non‐glaucous phenotypes: Inhibitor of wax 1 (Iw1) and Iw2. The molecular mechanisms and the exact extent (beyond visual assessment) by which these genes affect the composition and quantity of cuticular wax is unclear. To describe the Iw1 locus we used a genetic approach with detailed biochemical characterization of wax compounds. Using synteny and a large number of F₂ gametes, Iw1 was fine‐mapped to a sub‐cM genetic interval on wheat chromosome arm 2BS, which includes a single collinear gene from the corresponding Brachypodium and rice physical maps. The major components of flag leaf and peduncle cuticular waxes included primary alcohols, β‐diketones and n‐alkanes. Small amounts of C19–C27 alkyl and methylalkylresorcinols that have not previously been described in wheat waxes were identified. Using six pairs of BC₂F₃ near‐isogenic lines, we show that Iw1 inhibits the formation of β‐ and hydroxy‐β‐diketones in the peduncle and flag leaf blade cuticles. This inhibitory effect is independent of genetic background or tissue, and is accompanied by minor but consistent increases in n‐alkanes and C₂₄ primary alcohols. No differences were found in cuticle thickness and carbon isotope discrimination in near‐isogenic lines differing at Iw1.     

Molecular mapping of a gene ‘ld(t)’ controlling cleistogamy in rice

Cleistogamy is the self-pollination within closed spikelets and is expected to be a useful genetic tool for prevention of possible gene transfer in transgenic crops, for maintenance of genetic purity in autogamous crops, and for increased tolerance to biotic and abiotic stresses. Mapping of the gene ld(t), which is responsible for lack of lodicules inside spikelets and causes cleistogamy, was carried out using F₂ and F₃ populations derived from a cleistogamous (CL) mutant CL-SNU × Milyang 23 cross. A number of STS markers along chromosomes were developed and bulked segregant analysis was adopted for preliminary mapping. The results showed that the ld(t) was located at the end region of chromosome 1L, flanked by S01178b (an STS marker developed for the locus at 178 cM based on the rice genetic map reported by Japanese Rice Genome Project) at 0.8 cM and co-segregated with S01181a and S01181b (an STS marker developed for the locus at 181 cM).     

RAPD-based SCAR marker SCA 12 linked to recessive gene conferring resistance to anthracnose in sorghum [Sorghum bicolor (L.) Moench]

Anthracnose, caused by Colletotrichum graminicola, infects all aerial parts of sorghum, Sorghum bicolor (L.) Moench, plants and causes loss of as much as 70%. F₁ and F₂ plants inoculated with local isolates of C. graminicola indicated that resistance to anthracnose in sorghum accession G 73 segregated as a recessive trait in a cross with susceptible cultivar HC 136. To facilitate the use of marker-assisted selection in sorghum breeding programs, a PCR-based specific sequence characterized amplified region (SCAR) marker was developed. A total of 29 resistant and 20 susceptible recombinant inbred lines (RILs) derived from a HC 136 × G 73 cross was used for bulked segregant analysis to identify a RAPD marker closely linked to a gene for resistance to anthracnose. The polymorphism between the parents HC 136 and G 73 was evaluated using 84 random sequence decamer primers. Among these, only 24 primers generated polymorphism. On bulked segregant analysis, primer OPA 12 amplified a unique band of 383 bp only in the resistant parent G 73 and resistant bulk. Segregation analysis of individual RILs showed the marker OPA 12₃₈₃ was 6.03 cM from the locus governing resistance to anthracnose. The marker OPA 12₃₈₃ was cloned and sequenced. Based on the sequence of cloned RAPD product, a pair of SCAR markers SCA 12-1 and SCA 12-2 was designed using the MacVector program, which specifically amplified this RAPD fragment in resistant parent G 73, resistant bulk and respective RILs. Therefore, it was confirmed that SCAR marker SCA 12 is at the same locus as RAPD marker OPA 12₃₈₃ and hence, is linked to the gene for resistance to anthracnose.     

Combining Next Generation Sequencing with Bulked Segregant Analysis to Fine Map a Stem Moisture Locus in Sorghum (Sorghum bicolor L. Moench)

Sorghum is one of the most promising bioenergy crops. Stem juice yield, together with stem sugar concentration, determines sugar yield in sweet sorghum. Bulked segregant analysis (BSA) is a gene mapping technique for identifying genomic regions containing genetic loci affecting a trait of interest that when combined with deep sequencing could effectively accelerate the gene mapping process. In this study, a dry stem sorghum landrace was characterized and the stem water controlling locus, qSW6, was fine mapped using QTL analysis and the combined BSA and deep sequencing technologies. Results showed that: (i) In sorghum variety Jiliang 2, stem water content was around 80% before flowering stage. It dropped to 75% during grain filling with little difference between different internodes. In landrace G21, stem water content keeps dropping after the flag leaf stage. The drop from 71% at flowering time progressed to 60% at grain filling time. Large differences exist between different internodes with the lowest (51%) at the 7^th and 8^th internodes at dough stage. (ii) A quantitative trait locus (QTL) controlling stem water content mapped on chromosome 6 between SSR markers Ch6-2 and gpsb069 explained about 34.7-56.9% of the phenotypic variation for the 5^th to 10^th internodes, respectively. (iii) BSA and deep sequencing analysis narrowed the associated region to 339 kb containing 38 putative genes. The results could help reveal molecular mechanisms underlying juice yield of sorghum and thus to improve total sugar yield.     

Molecular tagging of gene conferring leaf blight resistance using microsatellites in sorghum [Sorghum bicolor (L.) Moench

Resistance to leaf blight in sorghum [Sorghum bicolor (L.) Moench] accession G-118 was found to segregate as a single dominant trait in a cross to susceptible cultivar, HC-136. Molecular marker(s) linked to the locus for disease resistance was identified using simple sequence repeat (SSR) markers coupled with bulk segregant analysis. Genomic DNA from the parental cultivars and bulks were screened by PCR amplification with 50 simple sequence repeat primer pairs. Out of these, 38 SSR primers produced polymorphism between parents. After screening of these 38 SSRs with resistant and susceptible bulk, one SSR primer, Xtxp 309 produced a unique band of approximately 700 bp only in resistant parent and resistant bulk and a unique band of 450 bp only in susceptible parent and susceptible bulk. Upon screening with individual resistant and susceptible recombinant inbred lines (RILs), marker Xtxp 309 produced amplification in 23 of the 26 resistant RILs and no amplification was produced in any of the 25 susceptible RILs. The same marker Xtxp 309 produced amplification in 21 of the susceptible RILs and 3 of the resistant RILs of 450 bp band. This was found to be located at a distance of 3.12 cM away from the locus governing resistance to leaf blight which was considered to be closely linked and 7.95 cM away from the locus governing susceptibility to leaf blight. This marker may prove useful in MAS for gene introgression, plant genetic diagnostics and gene pyramiding for resistance via genetic transformation for disease resistance in plants.     

Characterization,development and mapping of Unigene-derived microsatellite markers in sorghum [<Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.) Moench]

Molecular variation within known genes controlling specific functions provide candidate gene-based markers which are tightly linked with the trait of interest. Unigene-derived microsatellite markers, with their unique identity and positions, offer the advantage of unraveling variation in the expressed component of the genome. We characterized ≥12-bp-long microsatellite loci from 13,899 unique sequences of sorghum [Sorghum bicolor (L.) Moench] available in the NCBI unigene database for their abundance and possible use in sorghum breeding. Analysis of 12,464 unigenes (≥200-bp) using MISA software identified 14,082 simple sequence repeats (SSRs) in 7,370 unigenes, from which 1,519 unigene SSR markers were developed. The average frequency of SSR was 1 per1.6 kb and 1.0 per 1.1 unigene; hexamers followed by trimers were found in abundance, of which 33.3% AT-rich and CCG repeats were the most abundant. Of the 302 unigene SSRs tested, 60 (19.8%) were polymorphic between the two parents, M35-1 and B35 of a recombinant inbred line (RIL) mapping population. A mapping population consisting of 500 RILs was developed using the above two parents, and a subset of random 245 RILs was used for genotyping with polymorphic SSRs. We developed a linkage map containing 231 markers, of which 228 (174 genomic and 54 genic) were microsatellites and three were morphological markers. Markers were distributed over 21 linkage groups, and spanned a genetic distance of 1235.5 cM. This map includes 81 new SSRs, of which 35 (21 unigene and 14 genomic) were developed in the present study and 46 from other studies. The order of the SSR markers mapped in the present study was confirmed physically by BLAST search against the whole-genome shotgun sequence of sorghum. Many unigene sequences used for marker development in this study include genes coding for important regulatory proteins and functional proteins that are involved in stress-related metabolism. The unigene SSR markers used together with other SSR markers to construct the sorghum genetic map will have applications in studies on comparative mapping, functional diversity analysis and association mapping, and for quantitative trait loci detection for drought and other agronomically important traits in sorghum.     

Genetic Linkage Map Construction and QTL Mapping of Salt Tolerance Traits in Zoysiagrass (Zoysia japonica)

Zoysiagrass (Zoysia Willd.) is an important warm season turfgrass that is grown in many parts of the world. Salt tolerance is an important trait in zoysiagrass breeding programs. In this study, a genetic linkage map was constructed using sequence-related amplified polymorphism markers and random amplified polymorphic DNA markers based on an F₁ population comprising 120 progeny derived from a cross between Zoysia japonica Z105 (salt-tolerant accession) and Z061 (salt-sensitive accession). The linkage map covered 1211 cM with an average marker distance of 5.0 cM and contained 24 linkage groups with 242 marker loci (217 sequence-related amplified polymorphism markers and 25 random amplified polymorphic DNA markers). Quantitative trait loci affecting the salt tolerance of zoysiagrass were identified using the constructed genetic linkage map. Two significant quantitative trait loci (qLF-1 and qLF-2) for leaf firing percentage were detected; qLF-1 at 36.3 cM on linkage group LG4 with a logarithm of odds value of 3.27, which explained 13.1% of the total variation of leaf firing and qLF-2 at 42.3 cM on LG5 with a logarithm of odds value of 2.88, which explained 29.7% of the total variation of leaf firing. A significant quantitative trait locus (qSCW-1) for reduced percentage of dry shoot clipping weight was detected at 44.1 cM on LG5 with a logarithm of odds value of 4.0, which explained 65.6% of the total variation. This study provides important information for further functional analysis of salt-tolerance genes in zoysiagrass. Molecular markers linked with quantitative trait loci for salt tolerance will be useful in zoysiagrass breeding programs using marker-assisted selection.     

A physical map covering the nsv locus that confers resistance to Melon necrotic spot virus in melon (Cucumis melo L.)

Melon necrotic spot virus (MNSV) is a member of the genus Carmovirus, which produces severe yield losses in melon and cucumber crops. The nsv gene is the only known natural source of resistance against MNSV in melon, and confers protection against all widespread strains of this virus. nsv has been previously mapped in melon linkage group 11, in a region spanning 5.9 cM, saturated with RAPD and AFLP markers. To identify the nsv gene by positional cloning, we started construction of a high-resolution map for this locus. On the basis of the two mapping populations, F₂ and BC1, which share the same resistant parent PI 161375 (nsv/nsv), and using more than 3,000 offspring, a high-resolution genetic map has been constructed in the region around the nsv locus, spanning 3.2 cM between CAPS markers M29 and M132. The availability of two melon BAC libraries allowed for screening and the identification of new markers closer to the resistance gene, by means of BAC-end sequencing and mapping. We constructed a BAC contig in this region and identified the marker 52K20sp6, which co-segregates with nsv in 408 F₂ and 2.727 BC1 individuals in both mapping populations. We also identified a single 100 kb BAC that physically contains the resistance gene and covers a genetic distance of 0.73 cM between both BAC ends. These are the basis for the isolation of the nsv recessive-resistance gene.     

RAPD linkage mapping of the shell thickness locus in oil palm (Elaeis guineensis Jacq.)

Shell thickness is an important trait in oil palm breeding programs and is the basis for the classification of the varieties of oil palm into the types dura, tenera and pisifera. This trait seems to be controlled by a single locus, with two alleles (sh ⁺ and sh ⁻) showing codominant expression. Two single-tree linkage maps were constructed for a maternal tenera (sh ⁺ sh ⁻) palm and for a paternal pisifera (sh ⁻ sh ⁻) palm using the pseudo-testcross mapping strategy in combination with RAPD markers through the analysis of an F₁ tenera×pisifera progeny. A total of 308 arbitrary primers were screened in a sample of eight F₁ plants and 121 markers were detected in a testcross configuration. An average of 1.66 polymorphic marker per selected primer were identified in this cross. At LOD 5.0 (with some few exceptions) and θ=0.25 the maternal tenera map included a total of 48 markers distributed in 12 linkage groups or pairs of markers (449.3 cM) while the paternal pisifera map included 42 markers distributed in 15 linkage groups or pairs of markers (399.7 cM). We used RAPD and bulked segregant analysis (BSA) to identify markers more tightly linked to the sh ⁺ locus. A total of 174 new primers not previously used in the linkage analysis were screened using bulks of DNA extracted from plants selected for the contrasting shell-thickness phenotypes. Two RAPD markers (R11–1282 and T19–1046) were identified to be linked on both sides of the sh ⁺ locus on linkage group 4. The estimated map distances from sh ⁺ to R11–1282 and to T19–1046 were 17.5 cM and 23.9 cM, respectively. The results demonstrate the usefulness of RAPD markers and the pseudo-testcross mapping strategy for developing genetic linkage information, and constitute an important step towards early marker-assisted selection for shell thickness in oil palm. Received: 21 February 1999 / Accepted: 29 April 1999