Theoretical analysis of the kinetics of DNA hybridization with gel-immobilized oligonucleotides.

A new method of DNA sequencing by hybridization using a microchip containing a set of immobilized oligonucleotides is being developed. A theoretical analysis is presented of the kinetics of DNA hybridization with deoxynucleotide molecules chemically tethered in a polyacrylamide gel layer. The analysis has shown that long-term evolution of the spatial distribution and of the amount of DNA bound in a hybridization cell is governed by "retarded diffusion," i.e., diffusion of the DNA interrupted by repeated association and dissociation with immobile oligonucleotide molecules. Retarded diffusion determines the characteristic time of establishing a final equilibrium state in a cell, i.e., the state with the maximum quantity and a uniform distribution of bound DNA. In the case of cells with the most stable, perfect duplexes, the characteristic time of retarded diffusion (which is proportional to the equilibrium binding constant and to the concentration of binding sites) can be longer than the duration of the real hybridization procedure. This conclusion is indirectly confirmed by the observation of nonuniform fluorescence of labeled DNA in perfect-match hybridization cells (brighter at the edges). For optimal discrimination of perfect duplexes from duplexes with mismatches the hybridization process should be brought to equilibrium under low-temperature nonsaturation conditions for all cells. The kinetic differences between perfect and nonperfect duplexes in the gel allow further improvement in the discrimination through additional washing at low temperature after hybridization.     

Optimal conditions for hybridization with oligonucleotides: a study with myc-oncogene DNA probes

We present a study on the refinement of filter-hybridization conditions for a series of synthetic oligonucleotides in the range from 17 to 50 base residues in length. Experimental conditions for hybridization and the subsequent washing steps of the filter were optimized for different lengths of the synthetic oligonucleotides by varying the formamide concentration and washing conditions (temperature and monovalent cation concentration). Target DNA was immobilized to the nitrocellulose filter with the slot blot technique. The sequences of the synthetic oligonucleotides are derived from the third exon of the human oncogene c-myc and the corresponding viral gene v-myc and the G + C content was between 43 and 47%. Optimal conditions for hybridization with a 82% homologous 30-mer and 100% homologous 17-, 20-, 25-, 30-, and 50-mers were found to be a concentration of formamide of 15, 15, 30, 30, 40, and 50%, respectively. Optimal conditions for washing were 0.5X standard sodium citrate (SSC) at 42 degrees C for 2 X 15 min. The melting temperature for these optimal hybridization and washing conditions was calculated to be up to 11 degrees C below the hybridization temperature actually used. This confirms that the duplexes are more stable than expected. The melting points for 17-, 20-, and 30-mers were measured in the presence of 5X SSC and found to be 43, 58, and 60 degrees C, respectively. Competition between double- and single-stranded DNA probes to the target DNA was investigated. The single-stranded DNA probes were about 30- to 40-fold more sensitive than the double-stranded DNA probes.     

An oligonucleotide hybridization approach to DNA sequencing

We have proposed a DNA sequencing method based on hybridization of a DNA fragment to be sequenced with the complete set of fixed-length oligonucleotides (e.g., 4(8) = 65,536 possible 8-mers) immobilized individually as dots of a 2-D matrix [(1989) Dokl. Akad. Nauk SSSR 303, 1508-1511]. It was shown that the list of hybridizing octanucleotides is sufficient for the computer-assisted reconstruction of the structures for 80% of random-sequence fragments up to 200 bases long, based on the analysis of the octanucleotide overlapping. Here a refinement of the method and some experimental data are presented. We have performed hybridizations with oligonucleotides immobilized on a glass plate, and obtained their dissociation curves down to heptanucleotides. Other approaches, e.g., an additional hybridization of short oligonucleotides which continuously extend duplexes formed between the fragment and immobilized oligonucleotides, should considerably increase either the probability of unambiguous reconstruction, or the length of reconstructed sequences, or decrease the size of immobilized oligonucleotides.     

Hybridization of DNA with oligonucleotides immobilized in a gel: a convenient method for recording single base replacements

In an attempt to develop a reliable system for DNA sequence analysis with multiple hybridization probes, oligonucleotides down to 8 bases long were covalently immobilized in a thin layer of polyacrylamide gel fixed on a glass plate. It was shown possible to detect single base changes in DNA by hybridization of the immobilized oligonucleotides with radioactively and fluorescently labeled DNA fragments. Moreover, it was found that dissociation temperatures of differently GC-rich duplexes could be equalized by appropriate choice of immobilized oligonucleotides concentrations. A model accounting for this phenomenon is presented. In order to make the system more compact, a rectangular matrix of 200 mm dots of immobilized oligonucleotides ("hybridization chip") was designed which offered the sensitivity of 20 attomoles per dot for fluorescent DNA fragment. The applications and perspectives of the approach are discussed.     

Immobilization and hybridization of DNA in a sugar polyacrylate hydrogel

Using a non-contact microarrayer, amine-terminated probe oligonucleotides representing 20-, 50-, and 70-mer fragments of the fliC gene were covalently coupled into three-dimensional regions in a "sugar polyacrylate" hydrogel based on poly(6-acryloyl-beta-O-methyl galactopyranoside-co-aminopropyl methacrylamide). The arrayer deposited the solution containing ssDNA probes in discrete regions on the surface of the gel (i.e. as a droplet with a ca. 450 microm diameter), allowing penetration and attachment of the ss DNA within the three dimensional region of the gel. The attachment was mediated by the homobifunctional crosslinker bis-succinimidyl suberate. Confocal microscopy showed the density of attached probe DNA was greatest in the interior-most regions of the gel volume. Target ssDNA (20- and 70-mer) was able to diffuse through the gel and undergo successful hybridization with the probes. For target ssDNA in the concentration range 0.19 microM to 6.0 microM, there was a linear correlation between DNA concentration and the fluorescence of the gel region where hybridization occurred.     

A method for DNA sequencing by hybridization with oligonucleotide matrix.

A new technique of DNA sequencing by hybridization with oligonucleotide matrix (SHOM) which could also be applied for DNA mapping and fingerprinting, mutant diagnostics, etc., has been tested in model experiments. A dot matrix was prepared which contained 9 overlapping octanucleotides (8-mers) complementary to a common 17-mer. Each of the 8-mers was immobilized as individual dot in thin layer of polyacrylamide gel fixed on a glass plate. The matrix was hybridized with the 32P-labeled 17-mer and three other 17-mers differing from the first one by a single base change. The hybridization enabled us to distinguish perfect duplexes from those containing mismatches in 32 out of 35 cases. These results are discussed with respect to the applicability of the approach for sequencing. It was shown that hybridization of DNA with an immobilized 8-mer in the presence of a labeled 5-mer led to the formation of a stable duplex with the 5-mer only if the 5- and the 8-mers were in continuous stacking making a perfect nicked duplex 13 (5+8) base pairs long. These experiments and computer simulations suggest that continuous stacking hybridization may increase the efficiency of sequencing so that random or natural coding DNA fragments about 1000 bases long could be sequenced in more than 97% of cases. Miniaturized matrices or sequencing chips were designed, where oligonucleotides were immobilized within 100 x 100 micron dots disposed at 100 micron intervals. Hybridization of fluorescently labeled DNA fragments with microchips may simplify sequencing and ensure sensitivity of at least 10 attomoles per dot. The perspectives and limitations of SHOM are discussed.     

Kinetics of hybridization on surface oligonucleotide microchips: theory, experiment, and comparison with hybridization on gel-based microchips

The optimal design of oligonucleotide microchips and efficient discrimination between perfect and mismatch duplexes strongly depend on the external transport of target DNA to the cells with immobilized probes as well as on respective association and dissociation rates at the duplex formation. In this paper we present the relevant theory for hybridization of DNA fragments with oligonucleotide probes immobilized in the cells on flat substrate. With minor modifications, our theory also is applicable to reaction-diffusion hybridization kinetics for the probes immobilized on the surface of microbeads immersed in hybridization solution. The main theoretical predictions are verified with control experiments. Besides that, we compared the characteristics of the surface and gel-based oligonucleotide microchips. The comparison was performed for the chips printed with the same pin robot, for the signals measured with the same devices and processed by the same technique, and for the same hybridization conditions. The sets of probe oligonucleotides and the concentrations of probes in respective solutions used for immobilization on each platform were identical as well. We found that, despite the slower hybridization kinetics, the fluorescence signals and mutation discrimination efficiency appeared to be higher for the gel-based microchips with respect to their surface counterparts even for the relatively short hybridization time about 0.5-1 hour. Both the divergence between signals for perfects and the difference in mutation discrimination efficiency for the counterpart platforms rapidly grow with incubation time. In particular, for hybridization during 3 h the signals for gel-based microchips surpassed their surface counterparts in 5-20 times, while the ratios of signals for perfect-mismatch pairs for gel microchips exceeded the corresponding ratios for surface microchips in 2-4 times. These effects may be attributed to the better immobilization efficiency and to the higher thermodynamic association constants for duplex formation within gel pads.     

DNA sequencing by hybridization to microchip octa-and decanucleotides extended by stacked pentanucleotides.

The efficiency of sequencing by hybridization to an oligonucleotide microchip grows with an increase in the number and in the length of the oligonucleotides; however, such increases raise enormously the complexity of the microchip and decrease the accuracy of hybridization. We have been developing the technique of contiguous stacking hybridization (CSH) to circumvent these shortcomings. Stacking interactions between adjacent bases of two oligonucleotides stabilize their contiguous duplex with DNA. The use of such stacking increases the effective length of microchip oligonucleotides, enhances sequencing accuracy and allows the sequencing of longer DNA. The effects of mismatches, base composition, length and other factors on the stacking are evaluated. Contiguous stacking hybridization of DNA with immobilized 8mers and one or two 5mers labeled with two different fluorescent dyes increases the effective length of sequencing oligonucleotides from 8 to 13 and 18 bases, respectively. The incorporation of all four bases or 5-nitroindole as a universal base into different positions of the 5mers permitted a decrease in the number of additional rounds of hybridization. Contiguous stacking hybridization appears to be a promising approach to significantly increasing the efficiency of sequencing by hybridization.     

Matching base-pair number dependence of the kinetics of DNA-DNA hybridization studied by surface plasmon fluorescence spectroscopy

Two single-stranded DNA oligonucleotides consisting of complementary base-pairs can form double strands. This phenomenon is well studied in solutions, however, in order to clarify the physical mechanism of the hybridization occurring at a solid/solution interface, we studied the kinetics by surface plasmon fluorescence spectroscopy (SPFS): one single-stranded oligo-DNA (probe-DNA) was immobilized on the substrate, the other one (target-DNA) labelled with a fluorescent probe was added to the flow cell. After hybridization, the chromophores could be excited by the surface plasmon mode and their fluorescence detected with high sensitivity. The dependence of the k(on) and k(off) rate constants on the length of the hybridizing oligonucleotides was investigated by using a MM0 series (no mismatch) and the kinetics was found to be well described by a Langmuir adsorption model. From these measurements we found that also in the case of surface hybridization the affinity of the duplexes decreases as the number of matching base-pairs decreases from 15 to 10. In order to show that SPFS is the powerful technique with high sensitivity, the hybridization process for mixed target-oligos was measured by SPFS and analyzed by an expanded Langmuir model in which two components of target-oligo can bind to probe-DNA at the sensor surface competitively. Two sets of the k(on) and k(off) obtained from the experiment are successfully consistent with the k(on) and k(off) obtained from experiments for single (pure) target-DNA.     

Disposable DNA electrochemical sensor for hybridization detection

A disposable electrochemical sensor for the detection of short DNA sequences is described. Synthetic single-stranded oligonucleotides have been immobilized onto graphite screen printed electrodes with two procedures, the first involving the binding of avidinbiotinylated oligonucleotide and the second adsorption at a controlled potential. The probes were hybridized with different concentrations of complementary sequences. The formed hybrids on the electrode surface were evaluated by differential pulse voltammetry and chronopotentiometric stripping analysis using daunomycin hydrochloride as indicator of hybridization reaction. The probe immobilization step, the hybridization event and the indicator detection, have been optimized. The DNA sensor obtained by adsorption at a controlled potential was able to detect 1 microgram/ml of target sequence in the buffer solution using chronopotentiometric stripping analysis.     

Shielding effect of monovalent and divalent cations on solid-phase DNA hybridization: surface plasmon resonance biosensor study

Solid-phase hybridization, i.e. the process of recognition between DNA probes immobilized on a solid surface and complementary targets in a solution is a central process in DNA microarray and biosensor technologies. In this work, we investigate the simultaneous effect of monovalent and divalent cations on the hybridization of fully complementary or partly mismatched DNA targets to DNA probes immobilized on the surface of a surface plasmon resonance sensor. Our results demonstrate that the hybridization process is substantially influenced by the cation shielding effect and that this effect differs substantially for solid-phase hybridization, due to the high surface density of negatively charged probes, and hybridization in a solution. In our study divalent magnesium is found to be much more efficient in duplex stabilization than monovalent sodium (15 mM Mg²⁺ in buffer led to significantly higher hybridization than even 1 M Na⁺). This trend is opposite to that established for oligonucleotides in a solution. It is also shown that solid-phase duplex destabilization substantially increases with the length of the involved oligonucleotides. Moreover, it is demonstrated that the use of a buffer with the appropriate cation composition can improve the discrimination of complementary and point mismatched DNA targets.     

Detection of Streptococcus pneumoniae DNA by using polymerase chain reaction and microwell hybridization with Europium-labelled probes

The present paper describes a novel modification of polymerase chain reaction (PCR) for the detection of Streptococcus pneumoniae DNA in clinical specimens. PCR was based on the detection of a 209-base pair segment of the S. pneumoniae pneumolysin gene. For the demonstration of the amplification product, microwell hybridization with a Europium-labelled oligonucleotide probe complementary to a biotinylated strand of the PCR product was performed, and the presence of the PCR product was monitored by time-resolved fluorescence (TRF) of the Europium chelate. The sensitivity of the assay for purified S. pneumoniae DNA was 50 fg DNA corresponding to 20 genome equivalents of S. pneumoniae DNA. The efficiency of the hybridization step was monitored by using known amounts of synthetic target oligonucleotides as standards. Sensitivity of 3×10⁸ molecules per individual reaction well was achieved with a 30-min attachment time and a 3-h hybridization time.

Detection of PCR-amplified products by the microwell hybridization technique and TRF was compared to agarose gel electrophoresis in 50 middle ear fluid samples obtained from children with acute otitis media. The agarose gel and TRF detection methods identified all culture-positive samples, but both were also positive for 55% of the culture-negative samples. The results suggest that the detection of amplified PCR products by microwell hybridization using Europium-labelled oligonucleotides is a reliable method for the demonstration of the pneumolysin gene fragment. Furthermore, the method is suitable for automation and, thus, for testing high numbers of samples. The clinical significance of the PCR findings remains to be studied.     

DNA microarrays with stem-loop DNA probes: preparation and applications

We have developed DNA microarrays containing stem-loop DNA probes with short single-stranded overhangs immobilized on a Packard HydroGel chip, a 3-dimensional porous gel substrate. Microarrays were fabricated by immobilizing self-complementary single-stranded oligonucleotides, which adopt a partially duplex structure upon denaturing and re-annealing. Hybridization of single-stranded DNA targets to such arrays is enhanced by contiguous stacking interactions with stem-loop probes and is highly sequence specific. Subsequent enzymatic ligation of the targets to the probes followed by stringent washing further enhances the mismatched base discrimination. We demonstrate here that these microarrays provide excellent specificity with signal-to-background ratios of from 10- to 300-fold. In a comparative study, we demonstrated that HydroGel arrays display 10-30 times higher hybridization signals than some solid surface DNA microarrays. Using Sanger sequencing reactions, we have also developed a method for preparing nested 3'-deletion sets from a target and evaluated the use of stem-loop DNA arrays for detecting p53 mutations in the deletion set. The stem-loop DNA array format is simple, robust and flexible in design, thus it is potentially useful in various DNA diagnostic tests.     

DNA microarrays on nanoscale-controlled surface

We have developed new surface to ensure a proper spacing between immobilized biomolecules. While DNA microarray on this surface provided each probe DNA with ample space for hybridization with incoming target DNAs, the microarray showed enhanced discrimination efficiency for various types of single nucleotide polymorphism. The high discrimination efficiency holds for all tested cases (100:<1 for internal mismatched cases; 100:<28 for terminal mismatched ones). In addition, by investigating influence of hybridization temperature and washing condition on the fluorescence intensity and the discrimination efficiency with and without controlled mesospacing, it was observed that the nanoscale-controlled surface showed good discrimination efficiency in a wide range of temperature (37–50°C), and hybridization behavior on the surface was in agreement with the solution one. Intriguingly, it was found that washing process after the hybridization was critical for the high discrimination efficiency. For the particular case, washing process was so efficient that only 30 s washing was sufficient to reach the optimal discrimination ratio.     

Reliable hybridization of oligonucleotides as short as six nucleotides

Although there are many new applications for hybridizing short, synthetic oligonucleotide probes to DNA, such applications have not included determining unknown sequences of DNA. The lack of clear discrimination in hybridization of oligo probes shorter than 11 nucleotides and the lack of a theoretical understanding of factors influencing hybridization of short oligos have hampered the development of their use. We have found conditions for reliable hybridization of oligonucleotides as short as seven nucleotides to cloned DNA or to oligonucleotides attached to filters. Low-temperature hybridization and washing conditions, in contrast to the high stringency conditions currently used in hybridization experiments, have the potential for allowing the simple use of all oligos of six nucleotides or longer in meaningful hybridizations. We also present the hybridization discrimination theory that provides the conceptual framework for understanding these results.     

Development of a fast DNA-DNA hybridization method based on melting profiles in microplates

DNA-DNA hybridization is still the “gold standard” for the genotypic delineation of bacterial species. However, it is not widely used because traditional DNA-DNA hybridization techniques are rather time-consuming and not easy to perform in routine laboratories. In the present study, DNA of reference strains was digested with Sau3A, ligated with linker oligonucleotides S1/2 and in vitro amplified. The amplified DNA fragments were immobilized on MaxiSorb 96-well plates. DNA isolated from target strains was also digested with Sau3A, ligated with linker oligonuleotides P1/2 and in vitro amplified in the presence of digoxygenin modified dUTP. The labeled amplificate was hybridized to the immobilized reference DNA under isothermal conditions. Thermal denaturation curves of the DNA-DNA hybrids were obtained by using washing solutions of increasing stringency. Remaining hybrids were colorimetrically detected with anti-digoxygenin-horseradish peroxidase anti-bodies. The new method was validated with strains of the genus Pedioccocus for which DNA-DNA similarities have also been determined by the filter hybridization method. In addition, DNA-DNA hybridizations were performed with genotypically defined Enterobacter species.     

Enhancement of a hybridization analysis efficiency by the controlled DNA fragmentation

The influence of a DNA amplicon fragmentation on the efficiency of detecting a specific sequence by heterophase hybridization analysis was investigated. The nucleotide sequence was detected colorimetrically after biotinylation of an oligonucleotide probe immobilized on a solid carrier via limited elongation in complex with the sample DNA with the use of Taq polymerase. Two simple and reproducible techniques of amplicon fragmentation were proposed. The techniques are based on the introduction of apurinic/apyrimidinic sites in DNA and their subsequent thermal degradation. DNA was depurinated by a mild acidic treatment. Apyrimidinic sites were generated by treating a DNA fragment containing dUMP in place of some dTMP in various proportions with uracil-DNA glycosylase (UDG). The DNA sample treated by either method proved to be suitable for hybridization analysis with Taq polymerase without additional purification. The efficiency of hybridization analysis was higher with the fragmented than with the native DNA amplicon. DNA fragmentation makes it possible to use bridged oligonucleotides, having a lower hybridization ability, as highly selective hybridization probes.     

Restriction endonuclease mapping by crossed contact hybridization: the ribosomal RNA genes of Achlya ambisexualis.

A rapid, convenient and economical method for the hybridization of electrophoretically resolved RNA to DNA restriction fragments immobilized on nitrocellulose filters is described. DNA was digested, electrophoresed on agarose gels in a wide band and transferred to a nitrocellulose filter. The filter was then placed on the surface of a second gel containing radioactively labeled RNA electrophoresed under denaturing conditions in a similar way. The filter and gel were oriented so that the DNA and RNA bands were perpendicular to one another and the RNA was transferred from the gel through the filter under conditions which promote RNA-DNA hybridization. Following washing, the filter was autoradiographed. RNA-DNA sequence relationships could be conveniently determined from the spots produced at regions of intersection of homologous nucleic acids. The two dimensional array formed in this procedure fascilitates the rapid ordering of DNA restriction fragments. An example of its use for this purpose is presented.     

Temperature and salt dependence of the gel migration anomaly of curved DNA fragments.

A series of oligonucleotides of different sequences have been cloned to study DNA curvature. Several DNA fragments containing these oligonucleotides in various numbers of repeats were analyzed in 10% polyacrylamide gels. A strong gel migration anomaly was found for dA4 sequences; a comparably very small but clearly detectable anomaly was observed for dA3 (both in a repeat length of 10 base-pairs). The temperature and salt (NaCl, MgCl2) dependence of the gel migration anomaly of these DNA fragments was measured. While a similar behaviour of all sequences is observed for the addition of NaCl, the temperature and MgCl2 dependence of the anomaly varies with the oligonucleotide sequence. These data are interpreted in terms of local DNA structure changes induced by changes in the temperature and the MgCl2 concentration which affect the planarity of the curved DNA fragments.     

A fiber optic biosensor for fluorimetric detection of triple-helical DNA.

A fiber optic biosensor was used for the fluorimetric detection of T/AT triple-helical DNA formation. The surfaces of two sets of fused silica optical fibers were functionalized with hexaethylene oxide linkers from which decaadenylic acid oligonucleotides were grown in the 3'to 5'and 5'to 3'direction, respectively, using a DNA synthesizer. Fluorescence studies of hybridization showed unequivocal hybridization between oligomers immobilized on the fibers and complementary oligonucleotides from the solution phase, as detected by fluorescence from intercalated ethidium bromide. The complementary oligonucleotide, dT10, which was expected to Watson-Crick hybridize upon cooling the system below the duplex melting temperature ( T m), provided a fluorescence intensity with a negative temperature coefficient. Upon further cooling, to the point where the pyrimidine motif T*AT triple-helix formation occurred, a fluorescence intensity change with a positive temperature coefficient was observed. The reverse-Hoogsteen T.AT triplex, which is known to form with branched nucleic acids, provided a corresponding decrease in fluorescence intensity with decreasing temperature. Full analytical signal evolution was attainable in minutes.