Quantitative analysis of total mitochondrial DNA: competitive polymerase chain reaction versus real-time polymerase chain reaction

An efficient and effective method for quantification of small amounts of nucleic acids contained within a sample specimen would be an important diagnostic tool for determining the content of mitochondrial DNA (mtDNA) in situations where the depletion thereof may be a contributing factor to the exhibited pathology phenotype. This study compares two quantification assays for calculating the total mtDNA molecule number per nanogram of total genomic DNA isolated from human blood, through the amplification of a 613-bp region on the mtDNA molecule. In one case, the mtDNA copy number was calculated by standard competitive polymerase chain reaction (PCR) technique that involves co-amplification of target DNA with various dilutions of a nonhomologous internal competitor that has the same primer binding sites as the target sequence, and subsequent determination of an equivalence point of target and competitor concentrations. In the second method, the calculation of copy number involved extrapolation from the fluorescence versus copy number standard curve generated by real-time PCR using various dilutions of the target amplicon sequence. While the mtDNA copy number was comparable using the two methods (4.92 +/- 1.01 x 10(4) molecules/ng total genomic DNA using competitive PCR vs 4.90 +/- 0.84 x 10(4) molecules/ng total genomic DNA using real-time PCR), both inter- and intraexperimental variance were significantly lower using the real-time PCR analysis. On the basis of reproducibility, assay complexity, and overall efficiency, including the time requirement and number of PCR reactions necessary for the analysis of a single sample, we recommend the real-time PCR quantification method described here, as its versatility and effectiveness will undoubtedly be of great use in various kinds of research related to mitochondrial DNA damage- and depletion-associated disorders.     

Robust regression methods for real-time polymerase chain reaction

Current real-time polymerase chain reaction (PCR) data analysis methods implement linear least squares regression methods for primer efficiency estimation based on standard curve dilution series. This method is sensitive to outliers that distort the outcome and are often ignored or removed by the end user. Here, robust regression methods are shown to provide a reliable alternative because they are less affected by outliers and often result in more precise primer efficiency estimators than the linear least squares method.     

The polymerase chain reaction

The polymerase chain reaction (PCR) is a powerful new method for 'in vitro cloning'. It can selectively amplify a single molecule of template DNA several millionfold in a few hours and has made possible new approaches to problems in molecular genetics, evolutionary biology, and development.     

The polymerase chain reaction

This essay on the polymerase chain reaction is one of a series developed as part of FASEB's efforts to educate the general public, and the legislators whom it elects, about the benefits of fundamental biomedical research-particularly how investment in such research leads to scientific progress, improved health, and economic well-being.     

New buffers to improve the quantitative real-time polymerase chain reaction

Real-time PCR is a potent technique for nucleic acid quantification for research and diagnostic purposes, the wide dynamic range being one of the advantages over other techniques like the microarray. Several additives and enhancers have been studied to expand the PCR dynamic range in order to be more efficient in quantifying low quantities of nucleic acids, increase the yield and improve reaction efficiency. Shown here is that a combination of new buffers with the regularly used Tris buffer makes it possible to expand the real-time PCR dynamic range and to improve the efficiency and correlation coefficient. Mixing HEPES, TEA or MOPS with Tris was more efficient than Tris alone. It was also found that, if the pH value of the Tris buffer was calibrated with phosphoric acid instead of hydrochloric acid, then the dynamic range was significantly improved and low quantities could be detected and quantified more efficiently. Mixing more than one compound with the Tris buffer was also effective for expanding the dynamic range and increasing the efficiency and correlation coefficient in quantitative real-time PCR.     

Humic substances cause fluorescence inhibition in real-time polymerase chain reaction

Real-time polymerase chain reaction (qPCR) is the cornerstone of DNA analysis, enabling detection and quantification of minute nucleic acid amounts. However, PCR-based analysis is limited, in part, by the presence of inhibitors in the samples. PCR inhibition has been viewed solely as failure to efficiently generate amplicons, that is, amplification inhibition. Humic substances (HS) are well-known inhibitors of PCR amplification. Here we show that HS from environmental samples, specifically humic acid (HA), are very potent detection inhibitors, that is, quench the fluorescence signal of double-stranded DNA (dsDNA) binding dyes. HA quenched the fluorescence of the commonly used qPCR dyes EvaGreen, ResoLight, SYBR Green I, and SYTO 82, generating lowered amplification plots, although amplicon production was unaffected. For EvaGreen, 500 ng of HA quenched nearly all fluorescence, whereas 1000 ng of HA completely inhibited amplification when applying Immolase DNA polymerase with bovine serum albumin (BSA). Fluorescence spectroscopy measurements showed that HA quenching was either static or collisional and indicated that HA bound directly to the dye. Fulvic acid did not act as a qPCR detection inhibitor but inhibited amplification similarly to HA. Hydrolysis probe fluorescence was not quenched by HA. Detection inhibition is an overlooked phenomenon that needs to be considered to allow for development of optimal qPCR assays.     

Rapid titer determination of baculovirus by quantitative real-time polymerase chain reaction

Titer determination is a prerequisite for the study of viruses. However, the current available methods are tedious and time-consuming. To improve the efficiency of titer determination, we have developed a rapid and simple method for the routine detection of baculovirus titers using a quantitative real-time PCR. This method is based on the amplification of approximately 150-bp fragments located in the coding regions of selected genes. The PCR was found to be quantitative in a range of 10(3) to 10(9) virus particles per 200 microL of supernatant, and the results were closely correlated with titers detected from 50% tissue culture infectious doses (TCID(50)) of baculovirus. This quantitative real-time PCR requires only 30 min to perform, and the entire titer determination can be accomplished within 1 h without the need for cell seeding or further virus dilution and infection. Because this technology is easy to operate, generates data with high precision, and most importantly is very quick, it will certainly be broadly applied for titer determination of baculoviruses in the future.     

Detection of Streptococcus anginosus from saliva by real-time polymerase chain reaction

AIMS: The purpose of the present investigation was to assess the salivary levels of Streptococcus anginosus in periodontitis patients. METHODS AND RESULTS: The salivary levels of Strep. anginosus were assessed using real-time polymerase chain reaction (PCR). Streptococcus anginosus was detected in 28 of 37 (75.6%) of periodontitis patients and in three of the 20 (15%) healthy subjects. The mean values for bleeding on probing and probing depth in positive patients were statistically higher than those in negative patients. A significant decrease in Strep. anginosus levels was observed after periodontal treatment. CONCLUSIONS: Although the levels of Strep. anginosus are extremely low, they may reflect the status of periodontal health. SIGNIFICANCE AND IMPACT OF THE STUDY: Real-time PCR is a useful method for obtaining the relative quantities of Strep. anginosus from saliva samples and for monitoring the effect of therapy.     

Performance evaluation of optimal real-time polymerase chain reaction achieved with reduced voltage

Background

Polymerase chain reaction (PCR) is used in nucleic acid tests of infectious diseases in point-of-care testing. Previous studies have demonstrated real-time PCR that uses a micro-PCR chip made of packing tape, double-sided tape, and a plastic cover with polycarbonate or polypropylene on a black matte printed circuit board substrate. Despite the success of DNA amplification and fluorescence detection using an early version of the micro-PCR chip, reaching the target temperature was fairly slow and, as a result, the total running time was getting longer. To reduce this runtime, the micro-PCR chip was modified by reducing the heater pattern size of the PCB substrate to one-quarter of the original size or less, while maintaining the ability of the heating pattern to cover the reservoir area of the microfluidic channel. In subsequent experiments, DNA amplification failed several times. During the analysis of the cause of this failure, it was found that the reagent was boiling with the heating range from 25 to 95 °C.

Methods

As a method of DNA amplification verification, images were captured by digital single-lens reflex camera to detect FAM fluorescence using diagonal illumination from a blue LED light source. The images were automatically captured at 72 °C (the extension step in nucleic acid amplification) and the brightness of the captured images was analyzed to con-firm the success of DNA amplification.

Results

Compared to the previous chip with a larger heating pattern size, the current chip appears to generate excess energy as the size of the heating pattern was reduced. To reduce this excess energy, the initial voltage was lowered to 2 V and 2.5 V, which is equivalent to a one-fifth and one-quarter voltage–power reduction in pulse width modulation control, respectively. In both voltage reduction cases, the DNA amplification was successful.

Conclusions

DNA amplification tests may fail due to the excess energy generated by reducing the heater pattern size of the PCB substrate. However, the tests succeeded when the voltage was reduced to 2 V or 2.5 V. The 2.5 V power test was more efficient for reducing the overall running time.

     

BK virus DNA detection by real-time polymerase chain reaction in clinical specimens

The BK polyomavirus (BKV) is widespread in the general population. In transplant recipients, the patients' weakened immune response may encourage reactivation of latent infection, leading to BKV-related diseases. Rapid and quantitative detection might help to delineate viral reactivation patterns and could thus play an important role in their clinical management. In our study we developed an "in-house" quantitative real-time PCR to detect BKV DNA. The effectiveness of this assay was evaluated by a retrospective analysis of 118 plasma specimens from 22 bone marrow transplant (BMT) recipients and 107 samples from immunocompetent subjects. Eight (36.3%) of the 22 bone marrow transplant recipients tested positive for BKV. The viral load varied from specimen to specimen (10 to 10(5) copies/ml). BKV related disease like hemorrhagic cystitis (HC) was diagnosed in three patients. Specimens from the control group all tested negative. Our results showed the high sensitivity of the real-time PCR, allowing accurate and reproducible measuring of the viral load in order to identify patients at risk for BKV-related diseases. With due caution in interpreting threshold values, the real-time PCR could provide a rapid, sensitive and specific tool for detecting BKV and distinguishing latent and active infection.     

Detecting and resolving position-dependent temperature effects in real-time quantitative polymerase chain reaction

Real-time quantitative polymerase chain reaction (qPCR) depends on precise temperature control of the sample during cycling. In the current study, we investigated how temperature variation in plate-based qPCR instruments influences qPCR results. Temperature variation was measured by amplicon melting analysis as a convenient means to assess well-to-well differences. Multiple technical replicates of several SYBR Green I-based qPCR assays allowed correlation of relative well temperature to quantification cycle. We found that inadequate template denaturation results in an inverse correlation and requires increasing the denaturation temperature, adding a DNA destabilizing agent, or pretreating with a restriction enzyme. In contrast, inadequate primer annealing results in a direct correlation and requires lowering the annealing temperature. Significant correlations were found in 18 of 25 assays. The critical nature of temperature-dependent effects was shown in a blinded study of 29 patients for the diagnosis of Prader–Willy and Angelman syndromes, where eight diagnoses were incorrect unless temperature-dependent effects were controlled. A method to detect temperature-dependent effects by pairwise comparisons of replicates in routine experiments is presented and applied. Systematic temperature errors in qPCR instruments can be recognized and their effects eliminated when high precision is required in quantitative genetic diagnostics and critical complementary DNA analyses.