A genetic linkage map of <Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L. and localization of genes for specific resistance to six races of anthracnose (<Emphasis Type="Italic">Colletotrichum lindemuthianum</Emphasis>)

A genetic map of common bean was constructed using 197 markers including 152 RAPDs, 32 RFLPs, 12 SCARs, and 1 morphological marker. The map was established by using a F₂ population of 85 individuals from the cross between a line derived from the Spanish landrace Andecha (Andean origin) and the Mesoamerican genotype A252. The resulting map covers about 1,401.9 cM, with an average marker distance of 7.1 cM and includes molecular markers linked to disease resistance genes for anthracnose, bean common mosaic virus, bean golden yellow mosaic virus, common bacterial blight, and rust. Resistance to races 6, 31, 38, 39, 65, and 357 of the pathogenic fungus Colletotrichum lindemuthianum (anthracnose) was evaluated in F₃ families derived from the corresponding F₂ individuals. The intermediate resistance to race 65 proceeding from Andecha can be explained by a single dominant gene located on linkage group B1, corresponding to the Co-1 gene. The recombination between the resistance specificities proceeding from A252 agrees with the assumption that total resistance to races 6, 31, 38, 39, 65, and 357, is organized in two clusters. One cluster, located on B4 linkage group, includes individual genes for specific resistance to races 6, 38, 39, and 357. The second cluster is located on linkage group B11 and includes individual genes for specific resistance to races 6, 31, 38, 39, and 65. These two clusters correspond to genes Co-3/Co-9 and Co-2, respectively. It is concluded that most anthracnose resistance Co- genes, previously described as single major genes conferring resistance to several races, could be organized as clusters of different genes conferring race-specific resistance. C. Rodríguez-Suárez and B. Méndez-Vigo equally share for authorship.     

Identification of QTL for reaction to three races of <Emphasis Type="Italic">Colletotrichum trifolii</Emphasis> and further analysis of inheritance of resistance in autotetraploid lucerne

Anthracnose, caused by Colletotrichum trifolii, is one of the most serious diseases of lucerne worldwide. The disease is managed through deployment of resistant cultivars, but new pathotypes present a challenge to the successful implementation of this strategy. This paper reports the genetic map locations of quantitative trait loci (QTL) for reaction to races 1, 2 and 4 of C. trifolii in a single autotetraploid lucerne clone, designated W126 from the Australian cv. Trifecta. Resistance was mapped in a backcross population of 145 individuals, and reaction was assessed both by spray and injection inoculation of stems. Resistance to injection inoculation with races 1 and 4 was incompletely dominant and closely linked (phenotypic markers 2.2 cM apart); these resistances mapped to a linkage group homologous to Medicago truncatula linkage group 8. When the spray inoculation data were subjected to QTL analysis, the strongest QTL for resistance was located on linkage group 8; six QTL were identified for race 1 and four for race 4. Resistance to race 2 was incompletely recessive; four QTL were identified and these include one QTL on linkage group 4 that was also identified for race 1. Modelling of the interactions between individual QTL and marker effects allowed a total of 52–63% of the phenotypic variation to be described for each of the different races. These markers will have value in breeding lucerne, carrying multiple sources of resistance to the three known races of C. trifolii.     

Mapping and characterization of <Emphasis Type="Italic">FLC</Emphasis> homologs and QTL analysis of flowering time in <Emphasis Type="Italic">Brassica oleracea</Emphasis>

The FLC gene product is an inhibitor of flowering in Arabidopsis. FLC homologs in Brassica species are thought to control vernalization. We cloned four FLC homologs (BoFLCs) from Brassica oleracea. Three of these, BoFLC1, BoFLC3 and BoFLC5, have been previously characterized. The fourth novel sequence displayed 98% sequence homology to the previously identified gene BoFLC4, but also showed 91% homology to BrFLC2 from Brassica rapa. Phylogenetic analysis showed that this clone belongs to the FLC2 clade. Therefore, we designated this gene BoFLC2. Based on the segregation of RFLP, SRAP, CAPS, SSR and AFLP loci, a detailed linkage map of B. oleracea was constructed in the F₂ progeny obtained from a cross of B. oleracea cv. Green Comet (broccoli; non-vernalization type) and B. oleracea cv. Reiho (cabbage; vernalization type), which covered 540 cM, 9 major linkage groups. Six quantitative trait loci (QTL) controlling flowering time were detected. BoFLC1, BoFLC3 and BoFLC5 were not linked to the QTLs controlling flowering time. However, the largest QTL effect was located in the region where BoFLC2 was mapped. Genotyping of F₂ plants at the BoFLC2 locus showed that most of the early flowering plants were homozygotes of BoFLC-GC, whereas most of the late- and non-flowering plants were homozygotes of BoFLC-Rei. The BoFLC2 homologs present in plants of the non-vernalization type were non-functional, due to a frameshift in exon 4. Moreover, duplications and deletions of BoFLC2 were detected in broccoli and a rapid cycling line, respectively. These results suggest that BoFLC2 contributes to the control of flowering time in B. oleracea.     

Identification and mapping of resistance gene analogs and a white rust resistance locus in<Emphasis Type="Italic"> Brassica rapa</Emphasis> ssp.<Emphasis Type="Italic"> oleifera</Emphasis>

The objective of this investigation was to tag a locus for white rust resistance in a Brassica rapa ssp. oleifera F₂ population segregating for this trait, using bulked segregant analysis with random amplified polymorphic DNA (RAPD) markers, linkage mapping and a candidate gene approach based on resistance gene analogs (RGAs). The resistance source was the Finnish line Bor4109. The reaction against white rust races 7a and 7v was scored in 20 seedlings from each self-pollinated F₂ individual. The proportion of resistant plants among these F₃ families varied from 0 to 67%. Bulked segregant analysis did not reveal any markers linked with resistance and, therefore, a linkage map with 81 markers was created. A locus that accounted for 18.4% of the variation in resistance to white rust was mapped to linkage group (LG) 2 near the RAPD marker Z19a. During the study, a bacterial resistance gene homologous to Arabidopsis RPS2 and six different RGAs were sequenced. RPS2 and five of the RGAs were mapped to linkage groups LG1, LG4 and LG9. Unfortunately, none of the RGAs could be shown to be associated with white rust resistance.Communicated by H.C. BeckerThe nucleotide sequence data reported has been deposited in the Genbank under the accession numbers AF315081–AF315087.     

Development of public immortal mapping populations,molecular markers and linkage maps for rapid cycling <Emphasis Type="Italic">Brassica rapa</Emphasis> and <Emphasis Type="Italic">B. oleracea</Emphasis>

Publicly available genomic tools help researchers integrate information and make new discoveries. In this paper, we describe the development of immortal mapping populations of rapid cycling, self-compatible lines, molecular markers, and linkage maps for Brassica rapa and B. oleracea and make the data and germplasm available to the Brassica research community. The B. rapa population consists of 160 recombinant inbred (RI) lines derived from the cross of highly inbred lines of rapid cycling and yellow sarson B. rapa. The B. oleracea population consists of 155 double haploid (DH) lines derived from an F1 cross between two DH lines, rapid cycling and broccoli. A total of 120 RFLP probes, 146 SSR markers, and one phenotypic trait (flower color) were used to construct genetic linkage maps for both species. The B. rapa map consists of 224 molecular markers distributed along 10 linkage groups (A1–A10) with a total distance of 1125.3 cM and a marker density of 5.7 cM/marker. The B. oleracea genetic map consists of 279 molecular markers and one phenotypic marker distributed along nine linkage groups (C1–C9) with a total distance of 891.4 cM and a marker density of 3.2 cM/marker. A syntenic analysis with Arabidopsis thaliana identified collinear genomic blocks that are in agreement with previous studies, reinforcing the idea of conserved chromosomal regions across the Brassicaceae.     

An ultradense genetic recombination map for <Emphasis Type="Italic">Brassica napus</Emphasis>, consisting of 13551 SRAP markers

Sequence related amplified polymorphism (SRAP) was used to construct an ultradense genetic recombination map for a doubled haploid (DH) population in B. napus. A total of 1,634 primer combinations including 12 fluorescently labeled primers and 442 unlabeled ones produced 13,551 mapped SRAP markers. All these SRAPs were assembled in 1,055 bins that were placed onto 19 linkage groups. Ten of the nineteen linkage groups were assigned to the A genome and the remaining nine to the C genome on the basis of the differential SRAP PCR amplification in two DH lines of B. rapa and B. oleracea. Furthermore, all 19 linkage groups were assigned to their corresponding N1–N19 groups of B. napus by comparison with 55 SSR markers used to construct previous maps in this species. In total, 1,663 crossovers were detected, resulting in a map length span of 1604.8 cM. The marker density is 8.45 SRAPs per cM, and there could be more than one marker in 100 kb physical distance. There are four linkage groups in the A genome with more than 800 SRAP markers each, and three linkage groups in the C genome with more 1,000 SRAP markers each. Our studies suggest that a single SRAP map might be applicable to the three Brassica species, B. napus, B. oleracea and B. rapa. The use of this ultra high-density genetic recombination map in marker development and map-based gene cloning is discussed. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Simple and efficient methods for <Emphasis Type="Italic">S</Emphasis> genotyping and <Emphasis Type="Italic">S</Emphasis> screening in genus <Emphasis Type="Italic">Brassica</Emphasis> by dot-blot analysis

In F₁ hybrid breeding of Brassica vegetables utilizing the self-incompatibility system, identification of S genotypes in breeding lines is required. In the present study, we developed S-tester lines of 87 S haplotypes, i.e., 42 S haplotypes in B. rapa and 45 S haplotypes in B. oleracea. With these materials, we established a simple, efficient, and reliable dot-blot technique for S genotyping for 40 S haplotypes of B. rapa and and 33 of B. oleracea using allele-specific oligonucleotide probes and allele-specific primer pairs designed from sequences of each SP11 allele. In this method, DNA fragments amplified using multiplex primer pairs with digoxigenin-dUTP were hybridized with dot-blotted allele-specific oligonucleotide probes with distinct signals. In addition, we developed a screening method for identification of plants harboring a particular S haplotype using a labeled allele-specific oligonucleotide probe. This method is considered to be useful for purity testing of F₁ hybrid seeds.     

Identification of novel genomic regions associated with resistance to <Emphasis Type="Italic">Pyrenophora tritici</Emphasis>-<Emphasis Type="Italic">repentis</Emphasis> races 1 and 5 in spring wheat landraces using association analysis

Tan spot, caused by Pyrenophora tritici-repentis, is a major foliar disease of wheat worldwide. Host plant resistance is the best strategy to manage this disease. Traditionally, bi-parental mapping populations have been used to identify and map quantitative trait loci (QTL) affecting tan spot resistance in wheat. The association mapping (AM) could be an alternative approach to identify QTL based on linkage disequilibrium (LD) within a diverse germplasm set. In this study, we assessed resistance to P. tritici-repentis races 1 and 5 in 567 spring wheat landraces from the USDA-ARS National Small Grains Collection (NSGC). Using 832 diversity array technology (DArT) markers, QTL for resistance to P. tritici-repentis races 1 and 5 were identified. A linear model with principal components suggests that at least seven and three DArT markers were significantly associated with resistance to P. tritici-repentis races 1 and 5, respectively. The DArT markers associated with resistance to race 1 were detected on chromosomes 1D, 2A, 2B, 2D, 4A, 5B, and 7D and explained 1.3–3.1% of the phenotypic variance, while markers associated with resistance to race 5 were distributed on 2D, 6A and 7D, and explained 2.2–5.9% of the phenotypic variance. Some of the genomic regions identified in this study correspond to previously identified loci responsible for resistance to P. tritici-repentis, offering validation for our AM approach. Other regions identified were novel and could possess genes useful for resistance breeding. Some DArT markers associated with resistance to race 1 also were localized in the same regions of wheat chromosomes where QTL for resistance to yellow rust, leaf rust and powdery mildew, have been mapped previously. This study demonstrates that AM can be a useful approach to identify and map novel genomic regions involved in resistance to P. tritici-repentis.     

Identification of candidate genes of QTLs for seed weight in <Emphasis Type="Italic">Brassica napus</Emphasis> through comparative mapping among <Emphasis Type="Italic">Arabidopsis</Emphasis> and <Emphasis Type="Italic">Brassica</Emphasis>species

Background

Map-based cloning of quantitative trait loci (QTLs) in polyploidy crop species remains a challenge due to the complexity of their genome structures. QTLs for seed weight in B. napus have been identified, but information on candidate genes for identified QTLs of this important trait is still rare.

Results

In this study, a whole genome genetic linkage map for B. napus was constructed using simple sequence repeat (SSR) markers that covered a genetic distance of 2,126.4 cM with an average distance of 5.36 cM between markers. A procedure was developed to establish colinearity of SSR loci on B. napus with its two progenitor diploid species B. rapa and B. oleracea through extensive bioinformatics analysis. With the aid of B. rapa and B. oleracea genome sequences, the 421 homologous colinear loci deduced from the SSR loci of B. napus were shown to correspond to 398 homologous loci in Arabidopsis thaliana. Through comparative mapping of Arabidopsis and the three Brassica species, 227 homologous genes for seed size/weight were mapped on the B. napus genetic map, establishing the genetic bases for the important agronomic trait in this amphidiploid species. Furthermore, 12 candidate genes underlying 8 QTLs for seed weight were identified, and a gene-specific marker for BnAP2 was developed through molecular cloning using the seed weight/size gene distribution map in B. napus.

Conclusions

Our study showed that it is feasible to identify candidate genes of QTLs using a SSR-based B. napus genetic map through comparative mapping among Arabidopsis and B. napus and its two progenitor species B. rapa and B. oleracea. Identification of candidate genes for seed weight in amphidiploid B. napus will accelerate the process of isolating the mapped QTLs for this important trait, and this approach may be useful for QTL identification of other traits of agronomic significance.

     

RFLP mapping of loci controlling self-incompatibility in <Emphasis Type="Italic">Brassica campestris</Emphasis> and their comparative mapping with <Emphasis Type="Italic">B. napus</Emphasis> and <Emphasis Type="Italic">B. oleracea</Emphasis>

RFLP analysis of a cDNA probe SLG6, governing self incompatibility (SI) in Brassica oleracea, using a recombinant inbred population of Brassica campestris followed by genetic linkage analysis led to the detection of two marker loci, SLG6a and SLG6b controlling SI. SLG6a was mapped in linkage group (LG) 9 and was flanked by the RFLP markers ec4f10 (6.4 cM) and wg5b9 (4.2 cM). SLG6b positioned in LG 2 and was flanked by the RFLP markers wg2d11 (9.9 cM) and ec4e7 (26.9 cM). These results indicated the scope of marker-aided introgression of these genes into self-compatible genotypes for production of SI lines suitable for hybridization in B. campestris. Comparative mapping of LG 9 containing SLG6b with corresponding linkage groups of B. oleracea (BO 2) and B. napus (BN 16) led to the detection of small homologous regions with SLG6 locus linked with another RFLP locus. This evidenced for homology of the SLG genes across Brassica species and possibility of using any single cloned SLG gene for development of SI lines in any Brassica species.     

Detection,introgression and localization of genes conferring specific resistance to <Emphasis Type="Italic">Leptosphaeria maculans</Emphasis> from <Emphasis Type="Italic">Brassica rapa</Emphasis> into <Emphasis Type="Italic">B. napus</Emphasis>

Blackleg (stem canker) caused by the fungus Leptosphaeria maculans is one of the most damaging diseases of oilseed rape (Brassica napus). Crop relatives represent a valuable source of “new” resistance genes that could be used to diversify cultivar resistance. B. rapa, one of the progenitors of B. napus, is a potential source of new resistance genes. However, most of the accessions are heterozygous so it is impossible to directly detect the plant genes conferring specific resistance due to the complex patterns of avirulence genes in L. maculans isolates. We developed a strategy to simultaneously characterize and introgress resistance genes from B. rapa, by homologous recombination, into B. napus. One B. rapa plant resistant to one L. maculans isolate was used to produce B. rapa backcross progeny and a resynthesized B. napus plant from which a population of doubled haploid lines was derived after crossing with natural B. napus. We then used molecular analyses and resistance tests on these populations to identify and map the resistance genes and to characterize their introgression from B. rapa into B. napus. Three specific genes conferring resistance to L. maculans (Rlm1, Rlm2 and Rlm7) were identified in B. rapa. Comparisons of genetic maps showed that two of these genes were located on the R7 linkage group, in a region homologous to the region on linkage group N7 in B. napus, where these genes have been reported previously. The results of our study offer new perspectives for gene introgression and cloning in Brassicas.     

Molecular mapping of <Emphasis Type="Italic">Rym17</Emphasis>, a dominant and <Emphasis Type="Italic">rym18</Emphasis> a recessive barley yellow mosaic virus (BaYMV) resistance genes derived from <Emphasis Type="Italic">Hordeum vulgare</Emphasis> L.

PK23-2, a line of six-rowed barley (Hordeum vulgare L.) originating from Pakistan, has resistance to Japanese strains I and III of the barley yellow mosaic virus (BaYMV). To identify the source of resistance in this line, reciprocal crosses were made between the susceptible cultivar Daisen-gold and PK23-2. Genetic analyses in the F₁ generation, F₂ generation, and a doubled haploid population (DH45) derived from the F₁ revealed that PK23-2 harbors one dominant and one recessive resistance genes. A linkage map was constructed using 61 lines of DH45 and 127 DNA markers; this map covered 1268.8 cM in 10 linkage groups. One QTL having a LOD score of 4.07 and explaining 26.8% of the phenotypic variance explained (PVE) for resistance to BaYMV was detected at DNA marker ABG070 on chromosome 3H. Another QTL having a LOD score of 3.53 and PVE of 27.2% was located at marker Bmag0490 on chromosome 4H. The resistance gene on chromosome 3H, here named Rym17, showed dominant inheritance, whereas the gene on chromosome 4H, here named rym18, showed recessive inheritance in F₁ populations derived from crosses between several resistant lines of DH45 and Daisen-gold. The BaYMV recessive resistance genes rym1, rym3, and rym5, found in Japanese barley germplasm, were not allelic to rym18. These results revealed that PK23-2 harbors two previously unidentified resistance genes, Rym17 on 3H and rym18 on 4H; Rym17 is the first dominant BaYMV resistance gene to be identified in primary gene pool. These new genes, particularly dominant Rym17, represent a potentially valuable genetic resource against BaYMV disease.     

Genetics of Clubroot Resistance in <Emphasis Type="Italic">Brassica</Emphasis> Species

Clubroot disease, caused by the obligate plant pathogen Plasmodiophora brassicae Wor., is one of the most economically important diseases affecting Brassica crops in the world. The genetic basis of clubroot resistance (CR) has been well studied in three economically important Brassica species: B. rapa, B. oleracea, and B. napus. In B. rapa, mainly in Chinese cabbage, one minor and seven major CR genes introduced from European fodder turnips have been identified. Mapping of these CR genes localized Crr1 on R8, Crr2 on R1, CRc on R2, and Crr4 on R6 linkage groups of Chinese cabbage. Genes Crr3, CRa, CRb, and CRk mapped to R3, but at two separate loci, CRa and CRb are independent of Crr3 and CRk, which are closely linked. Further analysis suggested that Crr1, Crr2, and CRb have similar origins in the ancestral genome as in chromosome 4 of Arabidopsis thaliana. Genetic analysis of clubroot resistance genes in B. oleracea suggests that they are quantitative traits. Twenty-two quantitative trait loci (QTLs) were mapped in different linkage groups of B. oleracea. In B. napus, genetic analysis of clubroot resistance was found to be governed by one or two dominant genes, whereas resistance conferred by two recessive genes is reported. The quantitative analysis approach, however, proved that they are polygenic. In total, at least 16 QTLs have been detected on eight chromosomes of B. napus, N02, N03, N08, N09, N13, N15, N16, and N19. The chromosomal location of the other six QTLs is not clear. Cloning of any of these QTLs or resistance loci was not, however, possible until recently. Progress in genomics, particularly the techniques of comparative mapping and genome sequencing, supplements cloning and allows improved characterization of CR genes. Further development of DNA markers linked to CR genes will in turn hasten the breeding of clubroot-resistant Brassica cultivars.     

Polymorphism of the <Emphasis Type="Italic">CONSTANS</Emphasis> gene in <Emphasis Type="Italic">Brassica</Emphasis> plants

Using a direct amplification of genomic DNA from two Brassica rapa forms, we obtained two homologs of the CONSTANS gene, which controls the photoperiodic induction of flowering in Arabidopsis plants. The cloned fragments of B. rapa genome were identified as members of the CONSTANS-LIKE1 class. By aligning the nucleotide sequences of the CONSTANS gene and its homologs, three classes, CONSTANS, CONSTANS-LIKE1, and CONSTANS-LIKE2, were distinctly discerned by their primary structure. The pattern of restriction fragment length polymorphisms (RFLP) of the CONSTANS homologs in B. carinata, B. juncea, B. napus, B. nigra, B. oleracea, and B. rapa were genome-specific; in addition, the CONSTANS homologs were classified by plant geographic origin, and we assume that such classification is related to plant photoperiodic response.Translated from Fiziologiya Rastenii, Vol. 52, No. 2, 2005, pp. 274–281.Original Russian Text Copyright © 2005 by Martynov, Khavkin.This revised version was published online in April 2005 with a corrected cover date.     

Genetic and Pathogenic Variability of Indian Strains of <Emphasis Type="Italic">Xanthomonas campestris</Emphasis> pv. <Emphasis Type="Italic">campestris</Emphasis> Causing Black Rot Disease in Crucifers

Xanthomonas campestris pv. campestris (Pammel) Dowson (Xcc) causing black rot of crucifers is a serious disease in India and causes >50% crop losses in favorable environmental conditions. Pathogenic variability of Xcc, X. oryzae pv. oryzae (Xoo), and X. axonopodis pv. citri (Xac) were tested on 19 cultivars of cruciferae including seven Brassica spp. viz., B. campestris, B. carinata, B. juncea, B. napus, B. nigra, B. oleracea and B. rapa, and Raphanus sativus for two consecutive years viz., 2007–2008 and 2008–2009 under field conditions at Indian Agricultural Research Institute, New Delhi. Xcc (22 strains) and other species of Xanthomonas (2 strains), they formed three distinct groups of pathogenic variability i.e., Group 1, 2, and 3 under 50% minimum similarity coefficient. All strains of Xcc clustered under Groupl except Xcc-C20. The strains of Xcc further clustered in 6 subgroups viz., A, B, C, D, E, and F based on diseases reaction on host. Genetic variability of 22 strains of Xcc was studied by using Rep-PCR (REP-, BOX- and ERIC-PCR) and 10 strains for hrp (hypersensitive reaction and pathogenecity) gene sequence analysis. Xcc strains comprised in cluster 1, Xac under cluster 2, while Xoo formed separate cluster 3 based on >50% similarity coefficient. Cluster 1 was further divided into 8 subgroups viz., A, B, C, D, E, F, G, and H at 75% similarity coefficient. The hrpF gene sequence analysis also showed distinctness of Xcc strains from other Xanthomonads. In this study, genetic and pathogenic variability in Indian strains of Xcc were established, which will be of immense use in the development of resistant genotypes against this bacterial pathogen.     

The self-compatibility mechanism in <Emphasis Type="Italic">Brassica napus</Emphasis> L. is applicable to F<Subscript>1</Subscript> hybrid breeding

Brassica napus, an allopolyploid species having the A genome of B. rapa and the C genome of B. oleracea, is self-compatible, although both B. rapa and B. oleracea are self-incompatible. We have previously reported that SP11/SCR alleles are not expressed in anthers, while SRK alleles are functional in the stigma in B. napus cv. ‘Westar’, which has BnS-1 similar to B. rapa S-47 and BnS-6 similar to B. oleracea S-15. This genotype is the most frequent S genotype in B. napus, and we hypothesized that the loss of the function of SP11 is the primary cause of the self-compatibility of ‘Westar’. To verify this hypothesis, we transformed ‘Westar’ plants with the SP11 allele of B. rapa S-47. All the transgenic plants and their progeny were completely self-incompatible, demonstrating self-compatibility to be due to the S haplotype having the non-functional SP11 allele in the A genome, which suppresses a functional recessive SP11 allele in the C genome. An artificially synthesized B. napus line having two recessive SP11 alleles was developed by interspecific hybridization between B. rapa and B. oleracea. This line was self-incompatible, but F₁ hybrids between this line and ‘Westar’ were self-compatible. These results suggest that the self-compatibility mechanism of ‘Westar’ is applicable to F₁ seed production in B. napus.     

High-density <Emphasis Type="Italic">Brassica oleracea</Emphasis> linkage map: identification of useful new linkages

We constructed a 1,257-marker, high-density genetic map of Brassica oleracea spanning 703 cM in nine linkage groups, designated LG1–LG9. It was developed in an F2 segregating population of 143 individuals obtained by crossing double haploid plants of broccoli “Early-Big” and cauliflower “An-Nan Early”. These markers are randomly distributed throughout the map, which includes a total of 1,062 genomic SRAP markers, 155 cDNA SRAP markers, 26 SSR markers, 3 broccoli BAC end sequences and 11 known Brassica genes: BoGSL-ALK, BoGSL-ELONG, BoGSL-PROa, BoGSL-PROb, BoCS-lyase, BoGS-OH, BoCYP79F1, BoS-GT (glucosinolate pathway), BoDM1 (resistance to downy mildew), BoCALa, BoAP1a (inflorescence architecture). BoDM1 and BoGSL-ELONG are linked on LG 2 at 0.8 cM, making it possible to use the glucosinolate gene as a marker for the disease resistance gene. By QTL analysis, we found three segments involved in curd formation in cauliflower. The map was aligned to the C genome linkage groups and chromosomes of B. oleracea and B. napus, and anchored to the physical map of A. thaliana. This map adds over 1,000 new markers to Brassica molecular tools. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Quantitative trait loci for broomrape (<Emphasis Type="Italic">Orobanche cumana</Emphasis> Wallr.) resistance in sunflower

Broomrape (Orobanche cumana Wallr.) is a root parasite of sunflower that is regarded as one of the most important constraints of sunflower production in the Mediterranean region. Breeding for resistance is the most effective method of control. P-96 is a sunflower line which shows dominant resistance to broomrape race E and recessive resistance to the very new race F. The objective of this study was to map and characterize quantitative trait loci (QTL) for resistance to race E and to race F of broomrape in P-96. A population from a cross between P-96 and the susceptible line P-21 was phenotyped for broomrape resistance in four experiments, two for race E and two for race F, by measuring different resistance parameters (resistance or susceptibility, number of broomrape per plant, and proportion of resistant plants per F₃ family). This population was also genotyped with microsatellite and RFLP markers. A linkage map comprising 103 marker loci distributed on 17 linkage groups was developed, and composite interval mapping analyses were performed. In total, five QTL (or1.1, or3.1, or7.1 or13.1 and or13.2) for resistance to race E and six QTL (or1.1, or4.1, or5.1, or13.1, or13.2 and or16.1) for resistance to race F of broomrape were detected on 7 of the 17 linkage groups. Phenotypic variance for race E resistance was mainly explained by the major QTL or3.1 associated to the resistance or susceptibility character (R²=59%), while race F resistance was explained by QTL with a small to moderate effect (R² from 15.0% to 38.7%), mainly associated with the number of broomrape per plant. Or3.1 was race E-specific, while or1.1, or13.1 and or13.2 of were non-race specific. Or13.1, and or13.2 were stable across the four experiments. Or3.1, and or7.1 were stable over the two race E experiments and or1.1 and or5.1 over the two race F experiments. The results from this study suggest that resistance to broomrape in sunflower is controlled by a combination of qualitative, race-specific resistance affecting the presence or absence of broomrape and a quantitative non-race specific resistance affecting their number.Communicated by C. Möllers     

Identification of two loci for resistance to clubroot (<Emphasis Type="Italic">Plasmodiophora brassicae</Emphasis> Woronin) in <Emphasis Type="Italic">Brassica rapa</Emphasis> L.

In an analysis of 114 F₂ individuals from a cross between clubroot-resistant and susceptible lines of Brassica rapa L., 'G004' and 'Hakusai Chukanbohon Nou 7' (A9709), respectively, we identified two loci, Crr1 and Crr2, for clubroot (caused by Plasmodiophora brassicae Woronin) resistance. Each locus segregated independently among the F₂ population, indicating that the loci reside on a different region of chromosomes or on different chromosomes. Genetic analysis showed that each locus had little effect on clubroot resistance by itself, indicating that these two loci are complementary for clubroot resistance. The resistance to clubroot was much stronger when both loci were homozygous for resistant alleles than when they were heterozygous. These results indicate that clubroot resistance in B. rapa is under oligogenic control and at least two loci are necessary for resistance.Communicated by H.C. Becker     

QTL analysis for resistance to foliar damage caused by <Emphasis Type="Italic">Thrips tabaci</Emphasis> and <Emphasis Type="Italic">Frankliniella schultzei</Emphasis> (Thysanoptera: Thripidae) feeding in cowpea [<Emphasis Type="Italic">Vigna unguiculata</Emphasis> (L.) Walp.]

Three quantitative trait loci (QTL) for resistance to Thrips tabaci and Frankliniella schultzei were identified using a cowpea recombinant inbred population of 127 F_2:8 lines. An amplified fragment length polymorphism (AFLP) genetic linkage map and foliar feeding damage ratings were used to identify genomic regions contributing toward resistance to thrips damage. Based on Pearson correlation analysis, damage ratings were highly correlated (r ≥ 0.7463) across seven field experiments conducted in 2006, 2007, and 2008. Using the Kruskall–Wallis and Multiple-QTL model mapping packages of MapQTL 4.0 software, three QTL, Thr-1, Thr-2, and Thr-3, were identified on linkage groups 5 and 7 accounting for between 9.1 and 32.1% of the phenotypic variance. AFLP markers ACC-CAT7, ACG-CTC5, and AGG-CAT1 co-located with QTL peaks for Thr-1, Thr-2, and Thr-3, respectively. Results of this study will provide a resource for molecular marker development and the genetic characterization of foliar thrips resistance in cowpea.