Stoichiometry and stability of caldesmon in native thin filaments from sheep aorta smooth muscle.

Ca2(+)-regulated native thin filaments were extracted from sheep aorta smooth muscle. The caldesmon content determined by quantitative gel electrophoresis was 0.06 caldesmon molecule/actin monomer (1 caldesmon molecule per 16.3 actin monomers). Dissociation of caldesmon and tropomyosin from the thin filament and the depolymerization of actin was measured by sedimenting diluted thin filaments. Actin critical concentration was 0.05 microM at 10.1 and 0.13 at 10.05 compared with 0.5 microM for pure F-actin. Tropomyosin was tightly bound, with half-maximal dissociation at less than 0.3 microM thin filaments (actin monomer) under all conditions. Caldesmon dissociation was independent of tropomyosin and not co-operative. The concentration of thin filaments where 50% of the caldesmon was dissociated (CD50) ranged from 0.2 microM (actin monomer) at 10.03 to 8 microM at 10.16 in a 5 mM-MgCl2, pH 7.1, buffer. Mg2+, 25 mM at constant I, increased CD50 4-fold. CD50 was 4-fold greater at 10(-4) M-Ca2+ than at 10(-9) M-Ca2+. Aorta heavy meromyosin (HMM).ADP.Pi complex (2.5 microM excess over thin filaments) strongly antagonized caldesmon dissociation, but skeletal-muscle HMM.ADP.Pi did not. The behaviour of caldesmon in native thin filaments was indistinguishable from caldesmon in reconstituted synthetic thin filaments. The variability of Ca2(+)-sensitivity with conditions observed in thin filament preparations was shown to be related to dissociation of regulatory caldesmon from the thin filament.     

The effects of smooth muscle caldesmon on actin filament motility.

The movement of reconstituted thin filaments over an immobilized surface of thiophosphorylated smooth muscle myosin was examined using an in vitro motility assay. Reconstituted thin filaments contained actin, tropomyosin, and either purified chicken gizzard caldesmon or the purified COOH-terminal actin-binding fragment of caldesmon. Control actin-tropomyosin filaments moved at a velocity of 2.3 +/- 0.5 microns/s. Neither intact caldesmon nor the COOH-terminal fragment, when maintained in the monomeric form by treatment with 10 mM dithiothreitol, had any effect on filament velocity; and yet both were potent inhibitors of actin-activated myosin ATPase activity, indicating that caldesmon primarily inhibits myosin binding as reported by Chalovich et al. (Chalovich, J. M., Hemric, M. E., and Velaz, L. (1990) Ann. N. Y. Acad. Sci. 599, 85-99). Inhibition of filament motion was, however, observed under conditions where cross-linking of caldesmon via disulfide bridges was present. To determine if monomeric caldesmon could "tether" actin filaments to the myosin surface by forming an actin-caldesmon-myosin complex as suggested by Chalovich et al., we looked for caldesmon-dependent filament binding and motility under conditions (80 mM KCl) where filament binding to myosin is weak and motility is not normally seen. At caldesmon concentrations > or = 0.26 microM, actin filament binding was increased and filament motion (2.6 +/- 0.6 microns/s) was observed. The enhanced motility seen with intact caldesmon was not observed with the addition of up to 26 microM COOH-terminal fragment. Moreover, a molar excess of the COOH-terminal fragment competitively reversed the enhanced binding seen with intact caldesmon. These results show that tethering of actin filaments to myosin by the formation of an actin-caldesmon-myosin complex enhanced productive acto-myosin interaction without placing a significant mechanical load on the moving filaments.     

Identification by monoclonal antibodies and characterization of human platelet caldesmon

Actin-based gels were prepared from clarified high-salt extracts of human platelets by dialysis against physiological salt buffers. The gel was partially solubilized with 0.3 M KCl. Mice were immunized with the 0.3 M KCl extract of the actin gel, and hybridomas were produced by fusion of spleen cells with myeloma cells. Three hybridomas were generated that secrete antibodies against an 80-kD protein. These monoclonal antibodies stained stress fibers in cultured cells and cross-reacted with proteins in several tissue types, including smooth muscle. The cross-reacting protein in chicken gizzard smooth muscle had an apparent molecular weight of 140,000 and was demonstrated to be caldesmon, a calmodulin and actin-binding protein (Sobue, K., Y. Muramoto, M. Fujita, and S. Kakiuchi, Proc. Natl. Acad. Sci. USA, 78:5652-5655). No proteins of molecular weight greater than 80 kD were detectable in platelets by immunoblotting using the monoclonal antibodies. The 80-kD protein is heat stable and was purified using modifications of the procedure reported by Bretscher for the rapid purification of smooth muscle caldesmon (Bretscher, A., 1985, J. Biol. Chem., 259:12873-12880). The 80-kD protein bound to calmodulin-Sepharose in a Ca++-dependent manner and sedimented with actin filaments, but did not greatly increase the viscosity of F-actin solutions. The actin-binding activity was inhibited by calmodulin in the presence of calcium. Except for the molecular weight difference, the 80-kD platelet protein appears functionally similar to 140-kD smooth muscle caldesmon. We propose that the 80-kD protein is platelet caldesmon.     

Mechanism for the inhibition of acto-heavy meromyosin ATPase by the actin/calmodulin binding domain of caldesmon.

Caldesmon, an actin/calmodulin binding protein, inhibits acto-heavy meromyosin (HMM) ATPase, while it increases the binding of HMM to actin, presumably mediated through an interaction between the myosin subfragment 2 region of HMM and caldesmon, which is bound to actin. In order to study the mechanism for the inhibition of acto-HM ATPase, we utilized the chymotryptic fragment of caldesmon (38-kDa fragment), which possesses the actin/calmodulin binding region but lacks the myosin binding portion. The 38-kDa fragment inhibits the actin-activated HMM ATPase to the same extent as does the intact caldesmon molecule. In the absence of tropomyosin, the 38-kDa fragment decreased the KATPase and Kbinding without any effect on the Vmax. However, when the actin filament contained bound tropomyosin, the caldesmon fragment caused a 2-3-fold decrease in the Vmax, in addition to lowering the KATPase and the Kbinding. The 38-kDa fragment-induced inhibition is partially reversed by calmodulin at a 10:1 molar ratio to caldesmon fragment; the reversal was more remarkable in 100 mM ionic strength at 37 degrees C than in 20 or 50 mM at 25 degrees C. Results from these experiments demonstrate that the 38-kDa domain of caldesmon fragment of myosin head to actin; however, when the actin filament contains bound tropomyosin, caldesmon fragment affects not only the binding of HMM to/actin but also the catalytic step in the ATPase cycle. The interaction between the 38-kDa domain of caldesmon and tropomyosin-actin is likely to play a role in the regulation of actomyosin ATPase and contraction in smooth muscle.     

The influence of caldesmon on ATPase activity of the skeletal muscle actomyosin and bundling of actin filaments

Chicken gizzard caldesmon causes up to 40% inhibition of Mg2+-ATPase activity of rabbit skeletal muscle actomyosin. In the presence of chicken gizzard tropomyosin this inhibition is significantly increased, reaching a maximum (around 80%) at a molar ratio of caldesmon to actin monomer of 1 to 10-13. The inhibition of actomyosin ATPase takes place over a wide pH range (from 6.0 to 8.0) but is decreased with an increase in KCl and MgCl2 concentrations. Caldesmon, in the range of caldesmon/ actin ratios within which it inhibits actomyosin ATPase, forms bundles of parallelly aligned actin filaments. Calmodulin in the presence of Ca2+ dissociates these bundles and restrains the inhibition of actomyosin ATPase, provided that it is used at a high molar excess over caldesmon.     

Vascular smooth muscle caldesmon

Caldesmon, a major actin- and calmodulin-binding protein, has been identified in diverse bovine tissues, including smooth and striated muscles and various nonmuscle tissues, by denaturing polyacrylamide gel electrophoresis of tissue homogenates and immunoblotting using rabbit anti-chicken gizzard caldesmon. Caldesmon was purified from vascular smooth muscle (bovine aorta) by heat treatment of a tissue homogenate, ion-exchange chromatography, and affinity chromatography on a column of immobilized calmodulin. The isolated protein shared many properties in common with chicken gizzard caldesmon: immunological cross-reactivity, Ca2+-dependent interaction with calmodulin, Ca2+-independent interaction with F-actin, competition between actin and calmodulin for caldesmon binding only in the presence of Ca2+, and inhibition of the actin-activated Mg2+-ATPase activity of smooth muscle myosin without affecting the phosphorylation state of myosin. Maximal binding of aorta caldesmon to actin occurred at 1 mol of caldesmon: 9-10 mol of actin, and binding was unaffected by tropomyosin. Half-maximal inhibition of the actin-activated myosin Mg2+-ATPase occurred at approximately 1 mol of caldesmon: 12 mol of actin. This inhibition was also unaffected by tropomyosin. Caldesmon had no effect on the Mg2+-ATPase activity of smooth muscle myosin in the absence of actin. Bovine aorta and chicken gizzard caldesmons differed in several respects: Mr (149,000 for bovine aorta caldesmon and 141,000 for chicken gizzard caldesmon), extinction coefficient (E1%280nm = 19.5 and 5.0 for bovine aorta and chicken gizzard caldesmon, respectively), amino acid composition, and one-dimensional peptide maps obtained by limited chymotryptic and Staphylococcus aureus V8 protease digestion. In a competitive enzyme-linked immunosorbent assay, using anti-chicken gizzard caldesmon, a 174-fold molar excess of bovine aorta caldesmon relative to chicken gizzard caldesmon was required for half-maximal inhibition. These studies establish the widespread tissue and species distribution of caldesmon and indicate that vascular smooth muscle caldesmon exhibits physicochemical differences yet structural and functional similarities to caldesmon isolated from chicken gizzard.     

Characterization of 83-kilodalton nonmuscle caldesmon from cultured rat cells: stimulation of actin binding of nonmuscle tropomyosin and periodic localization along microfilaments like tropomyosin

Nonmuscle caldesmon purified from cultured rat cells shows a molecular weight of 83,000 on SDS gels, Stokes radius of 60.5 A, and sedimentation coefficient (S20,w) of 3.5 in the presence of reducing agents. These values give a native molecular weight of 87,000 and a frictional ratio of 2.04, suggesting that the molecule is a monomeric, asymmetric protein. In the absence of reducing agents, the protein is self-associated, through disulfide bonds, into oligomers with a molecular weight of 230,000 on SDS gels. These S-S oligomers appear to be responsible for the actin-bundling activity of nonmuscle caldesmon in the absence of reducing agents. Actin binding is saturated at a molar ratio of one 83-kD protein to six actins with an apparent binding constant of 5 X 10(6) M-1. Because of 83-kD nonmuscle caldesmon and tropomyosin are colocalized in stress fibers of cultured cells, we have examined effects of 83-kD protein on the actin binding of cultured cell tropomyosin. Of five isoforms of cultured rat cell tropomyosin, tropomyosin isoforms with high molecular weight values (40,000 and 36,500) show higher affinity to actin than do tropomyosin isoforms with low molecular weight values (32,400 and 32,000) (Matsumura, F., and S. Yamashiro-Matsumura. 1986. J. Biol. Chem. 260:13851-13859). At physiological concentration of KCl (100 mM), 83-kD nonmuscle caldesmon stimulates binding of low molecular weight tropomyosins to actin and increases the apparent binding constant (Ka from 4.4 X 10(5) to 1.5 X 10(6) M-1. In contrast, 83-kD protein has slight stimulation of actin binding of high molecular weight tropomyosins because high molecular weight tropomyosins bind to actin strongly in this condition. As the binding of 83-kD protein to actin is regulated by calcium/calmodulin, 83-kD protein regulates the binding of low molecular weight tropomyosins to actin in a calcium/calmodulin-dependent way. Using monoclonal antibodies to visualize nonmuscle caldesmon along microfilaments or actin filaments reconstituted with purified 83-kD protein, we demonstrate that 83-kD nonmuscle caldesmon is localized periodically along microfilaments or actin filaments with similar periodicity (36 +/- 4 nm) as tropomyosin. These results suggest that 83-kD protein plays an important role in the organization of microfilaments, as well as the control of the motility, through the regulation of the binding of tropomyosin to actin.     

Interaction between caldesmon and tropomyosin in the presence and absence of smooth muscle actin

Cysteine residues of caldesmon were labeled with the fluorescent reagent N-(1-pyrenyl)maleimide. The number of sulfhydryl (SH) groups in caldesmon was around 3.5 on the basis of reactivity to 5,5'-dithiobis(2-nitrobenzoate); 80% of the SH groups were labeled with pyrene. The fluorescence spectrum from pyrene-caldesmon showed the presence of excited monomer and dimer (excimer). As the ionic strength increased, excimer fluorescence decreased, disappearing at salt concentrations higher than around 50 mM. The labeling of caldesmon with pyrene did not affect its ability to inhibit actin activation of heavy meromyosin Mg-ATPase and the release of this inhibition in the presence of Ca2+-calmodulin. Tropomyosin induced a change in the fluorescence spectrum of pyrene-caldesmon, indicating a conformational change associated with the interaction between caldesmon and tropomyosin. The affinity of caldesmon to tropomyosin was dependent on ionic strength. The binding constant was 5 x 10(6) M-1 in low salt, and the affinity was 20-fold less at ionic strengths close to physiological conditions. In the presence of actin, the affinity of caldesmon to tropomyosin was increased 5-fold. The addition of tropomyosin also changed the fluorescence spectrum of pyrene-caldesmon bound to actin filaments. The change in the conformation of tropomyosin, caused by the interaction between caldesmon and tropomyosin, was studied with pyrene-labeled tropomyosin. Fluorescence change was evident when unlabeled caldesmon was added to pyrene-tropomyosin bound to actin. These data suggest that the interaction between caldesmon and tropomyosin on the actin filament is associated with conformational changes on these thin filament associated proteins. These conformational changes may modulate the ability of thin filament to interact with myosin heads.     

Caldesmon inhibits skeletal actomyosin subfragment-1 ATPase activity and the binding of myosin subfragment-1 to actin

Smooth muscle contraction is controlled in part by the state of phosphorylation of myosin. A recently discovered actin and calmodulin-binding protein, named caldesmon, may also be involved in regulation of smooth muscle contraction. Caldesmon cross-links actin filaments and also inhibits actin-activated ATP hydrolysis by myosin, particularly in the presence of tropomyosin. We have studied the effect of caldesmon on the rate of hydrolysis of ATP by skeletal muscle myosin subfragment-1, a system in which phosphorylation of the myosin is not important in regulation. Caldesmon is a very effective inhibitor of ATP hydrolysis giving up to 95% inhibition. At low ionic strength (approximately 20 mM) this effect does not require smooth muscle tropomyosin, whereas at high ionic strength (approximately 120 mM) tropomyosin enhances the inhibitory activity of caldesmon at low caldesmon concentrations. Cross-linking of actin is not essential for inhibition of ATP hydrolysis to occur since at high ionic strength there is very little cross-linking as determined by a low speed sedimentation assay. Under all conditions examined, the decrease in the rate of ATP hydrolysis is accompanied by a decrease in the binding of myosin subfragment-1 to actin. Furthermore, caldesmon weakens the equilibrium binding of myosin subfragment-1 to actin in the presence of pyrophosphate. We conclude that caldesmon has a general weakening effect on the binding of skeletal muscle myosin subfragment-1 to actin and that this weakening in binding may be responsible for inhibition of ATP hydrolysis.     

X-ray diffraction studies on oriented gels of vertebrate smooth muscle thin filaments.

The ATPase activity of acto-myosin subfragment 1 (S1) at low ratios of S1 to actin in the presence of tropomyosin is dependent on the tropomyosin source and ionic conditions. Whereas skeletal muscle tropomyosin causes a 60% inhibitory effect at all ionic strengths, the effect of smooth muscle tropomyosin was found to be dependent on the ionic strength. At low ionic strength (20 mM) smooth muscle tropomyosin inhibits the ATPase activity by 60%, while at high ionic strength (120 mM) it potentiates the ATPase activity three- to five-fold. Therefore, the difference in the effect of smooth muscle and skeletal muscle tropomyosin on the acto-S1 ATPase activity was due to a greater fraction of the tropomyosin-actin complex being turned on in the absence of S1 with smooth muscle tropomyosin than with skeletal muscle tropomyosin. Using well-oriented gels of actin and of reconstituted specimens from vertebrate smooth muscle thin filament proteins suitable for X-ray diffraction, we localized the position of tropomyosin on actin under different levels of acto-S1 ATPase activity. By analysing the equatorial X-ray pattern of the oriented specimens in combination with solution scattering experiments, we conclude that tropomyosin is located at a binding radius of about 3.5 nm on the f-actin helix under all conditions studied. Furthermore, we find no evidence that the azimuthal position of tropomyosin is different for smooth muscle tropomyosin at various ionic strengths, or vertebrate tropomyosin, since the second actin layer-line intensity (at 17.9 nm axial and 4.3 nm radial spacing), which was shown in skeletal muscle to be a sensitive measure of this parameter, remains strong and unchanged. Differences in the ATPase activity are not necessarily correlated with different positions of tropomyosin on f-actin. The same conclusion is drawn from our observations that, although the regulatory protein caldesmon inhibits the ATPase activity in native and reconstituted vertebrate smooth muscle thin filaments at a molar ratio of actin/tropomyosin/caldesmon of 28:7:1, the second actin layer-line remains strong. Only adding caldesmon in excess reduces the intensity of the second actin layer-line, from which the binding radius of caldesmon can be estimated to be about 4 nm. The lack of predominant meridional reflections in oriented specimens, with caldesmon present, suggests that caldesmon does not project away from the thin filament as troponin molecules in vertebrate striated muscle in agreement with electron micrographs of smooth muscle thin filaments. In freshly prepared native smooth muscle thin filaments we observed a Ca(2+)-sensitive reversible bundling effect.(ABSTRACT TRUNCATED AT 400 WORDS)     

Interconversion of structural and contractile actin gels by insertion of myosin during assembly

Extracts of the soluble cytoplasmic proteins of the sea urchin egg form gels of different composition and properties depending on the temperature used to induce actin polymerization. At temperatures that inactivate myosin, a gel composed of actin, fascin, and a 220,000-mol- wt protein is formed. Fascin binds actin into highly organized units with a characteristic banding pattern, and these actin-fascin units are the structural core of the sea urchin microvilli formed after fertilization and of the urchin coelomocyte filopods. Under milder conditions a more complex myosin-containing gel is formed, which contracts to a small fraction of its original volume within an hour after formation. What has been called "structural" gel can be assembled by combining actin, fascin, and the 220,000-mol-wt protein in 50-100 mM KCl; the aim of the experiments reported here was to determine whether myosin could be included during assembly, thereby interconverting structural and contractile gel. This approach is limited by the aggregation of sea urchin myosin at the low salt concentrations utilized in gel assembly. A method has been devised for the sequential combination of these components under controlled KCl and ATP concentrations that allows the formation of a gel containing dispersed myosin at a final concentration of 60-100 mM KCl. These gels are stable at low (approximately 10 micron) ATP concentrations, but contract to a small volume in the presence of higher (approximately 100 micron) ATP. Contraction can be controlled by forming a stable gel at low ATP and then overlaying it with a solution containing sufficient ATP to induce contraction. This system may provide a useful model for the study of the interrelations between cytoplasmic structure and motility.     

Purification and characterization of squid brain myosin.

Myosin was extracted from frozen squid brain and purified by a modification of the procedure of Pollard et al. (Pollard, T.D., Thomas, S.M., and Niederman, R. (1974) Anal. Biochem. 60, 258-266). Myosin was eluted from Bio-Gel A-15m column as a single peak of (K+-EDTA)-activated ATPase ((K+-EDTA)-ATPase) activity with an average partition coefficient (Kav) of 0.22. In sodium dodecyl sulfate-acrylamide gel electrophoresis, the purified myosin showed a predominant band with similar electrophoretic mobility as the heavy chain of rabbit skeletal muscle myosin, and two less intense bands near the bottom of the gel. No actin band was seen. The properties of the (K+-EDTA)-ATPase activity were: (a) the time course of the reaction was biphasic at 25 degrees but linear at 32 degrees; (b) the optimum rate of reaction was obtained between 0.3 and 0.8 M KCl; (c) the pH optimum was between 8.0 and 9.0; (d) the reaction was specific for ATP with an apparent Km of 0.19 mM. ATPase activity in 0.06 M KCl and 5 mM MgCl2 was increased about 1.5 times by a 10-fold excess of rabbit skeletal muscle F-actin and about 5 times by a 40-fold excess. The actin activation was inhibited slightly by the addition of 0.2 mM CaCl2 and completely by the addition of 10 mM CaCl2. Myosin formed arrowhead patterns with rabbit skeletal muscle F-actin as observed by electron microscopy of negatively stained samples. It also aggregated in bipolar filaments which attached to decorated actin filaments at different angles, as well as formed cross-connections and ladder-like patterns between actin filaments. These two forms of interactions between myosin and actin were abolished by treatment with MgATP.     

The role of tropomyosin in the interactions of F-actin with caldesmon and actin-binding protein (or filamin)

The interactions of actin filaments with actin-binding protein (filamin) and caldesmon under the influence of tropomyosin were studied in detail using falling-ball viscometry, binding assay and electron microscopy. Caldesmon decreased the binding constant of filamin with F-actin. In contrast, the maximum binding ability of filamin to F-actin was decreased by tropomyosin. The filamin-induced gelation of actin filaments was inhibited by caldesmon. Tropomyosin also inhibited this gelation. The effect of caldesmon became stronger under the influence of tropomyosin. Furthermore, both caldesmon and tropomyosin additionally decreased the filamin binding to F-actin. From these results, caldesmon and tropomyosin appeared to influence filamin binding to F-actin with different modes of actin. In addition, there was no sign of direct interactions between filamin, caldesmon and tropomyosin as judged from gel filtration. Under the influence of caldesmon and tropomyosin, calmodulin conferred Ca2+ sensitivity on the filamin-induced gelation of actin filaments.     

Studies on the spectrin-like protein from the intestinal brush border, TW 260/240, and characterization of its interaction with the cytoskeleton and actin

The terminal web of the intestinal brush border contains a spectrin- like protein, TW 260/240 (Glenney, J. R., Jr., P. Glenney, M. Osborne, and K. Weber, 1982, Cell, 28:843-854.) that interconnects the "rootlet" ends of microvillar filament bundles in the terminal web (Hirokawa, N., R. E. Cheng, and M. Willard, 1983, Cell, 32:953-965; Glenney J. R., P. Glenney, and K. Weber, 1983, J. Cell Biol., 96:1491-1496). We have investigated further the structural properties of TW 260/240 and the interaction of this protein with actin. Salt extraction of TW 260/240 from isolated brush borders results in a loss of terminal web cross- linkers primarily from the apical zone directly beneath the plasma membrane. Morphological studies on purified TW 260/240 using the rotary shadowing technique confirm earlier results that this protein is spectrin-like and is in the tetrameric state in buffers of low ionic strength. However, examination of TW 260/240 tetramers by negative staining revealed a molecule much straighter and more uniform in diameter than rotary-shadowed molecules. At salt concentrations at (150 mM KCl) and above (300 mM KCl) the physiological range, we observed a partial dissociation of tetramers into dimers that occurred at both 0 degree and 37 degrees C. We also observed (in the presence of 75 mM KCl) a concentration-dependent self-association of TW 260/240 into sedimentable aggregates. We have studied the interaction of TW 260/240 with actin using techniques of co-sedimentation, viscometry, and both light and electron microscopy. We observed that TW 260/240 can bind and cross-link actin filaments and that this interaction is salt- and pH- dependent. Under optimum conditions (25-75 mM KCl, at pH 7.0) TW 260/240 cross-linked F-actin into long, large-diameter bundles. The filaments within these bundles were tightly packed but loosely ordered. At higher pH (7.5) such bundles were not observed, although binding and cross-linking were detectable by co-sedimentation and viscometry. At higher salt (greater than 150 mM KCl), the binding of TW 260/240 to actin was inhibited. The presence of skeletal muscle tropomyosin had no significant effect on the salt-dependent binding of TW 260/240 to F- actin.     

Influence of ionic strength,actin state,and caldesmon construct size on the number of actin monomers in a caldesmon binding site

There is no consensus on the mechanism of inhibition of actin-myosin ATPase activity by caldesmon. Various models are based on different assumptions for the number of actin monomers that constitute a caldesmon binding site. Differences in binding behavior may be due to variations in the assay, the range of caldesmon concentrations, the type of caldesmon, and the method of data analysis used. We have evaluated these factors by measuring binding in the presence and absence of tropomyosin with both intact caldesmon and a recombinant 35 kDa actin binding fragment and with actin initially in the polymerized state or monomeric state. In all cases caldesmon binding could be simulated with a model having one class of binding sites. However, the number of actin monomers constituting a site was variable. Binding to F-actin at 165 mM ionic strength was best described with 7 actin monomers per site. When caldesmon bound to actin during the polymerization of G-actin, the size of the binding site was 3. Binding of the expressed truncated fragment, Cad35, could be described with 3 monomers per site. A simple interpretation of the data is that caldesmon binds tightly to 2-3 actin monomers. Additional parts of caldesmon bind less tightly to actin, causing caldesmon to cover approximately 7 actin monomers. The appendix contains an analysis of several binding curves with multiple binding site models. There is no compelling evidence for two classes of binding sites.     

Caldesmon-induced polymerization of actin from profilactin

We have investigated the effect of caldesmon, a Ca2+/calmodulin-regulated actin-binding protein, on the complex between profilin and G-actin (profilactin). We found that smooth muscle caldesmon dissociates this complex rapidly and induces the polymerization of the released actin. Native profilactin (e.g. the complex isolated from calf thymus) proved more resistant to the attack of caldesmon than a heterologous complex reconstituted from calf thymus profilin and skeletal muscle actin. The mode of caldesmon-induced profilactin dissociation was similar to that described for Mg2+, and 2 mM MgCl2 potentiated the caldesmon effect. Since both caldesmon and profilin have been found enriched in ruffling membranes of animal cells, our in vitro findings may be relevant to the regulation of actin filaments in living cells.     

Purification and properties of soluble actin from sea urchin eggs

Unfertilized eggs of the sea urchin, Strongylocentrotus purpuratus, were homogenized in a buffer containing 0.1 M KCl and 2 mM MgCl2 at pH 6.85. About 50% of the actin was recovered in the high-speed supernate of the homogenate. More than 80% of the actin in this supernate was found to be monomeric upon gel filtration chromatography through a Sephadex G-150 column or by a DNase I inhibition assay. The critical concentration for polymerization of this actin prior to further purification was 0.3-0.9 mg/ml under various conditions. Actin was purified to near homogeneity from the Sephadex G-150 pool with high yield. The purified actin had a critical concentration for polymerization of 0.02-0.03 mg/ml. The isoelectric point of the crude actin and the purified actin was the same. Indeed, we found that there is only one isoelectric focusing species of actin in the sea urchin egg, and it has an isoelectric point more basic than rabbit skeletal muscle actin. The discrepancy between the polymerizability of the crude and purified actin may be due to the presence of factors in the crude fraction which inhibit the polymerization of actin.     

Conformation changes of actin during formation of filaments and paracrystals and upon interaction with DNase I, cytochalasin B, and phalloidin

Spin labels attached to rabbit muscle actin became more immobilized upon conversion of actin from the G state to the F state with 50 mM KCl. Titration of G-actin with MgCl2 produced F-actin-like EPR spectra between 2 and 5 mM-actin filaments by electron microscopy. Higher concentrations of MgCl2 produced bundles of actin and eventually paracrystals, accompanied by further immobilization of spin labels. The effects of MgCl2 and KCl were competitive: addition of MgCl2 to 50 mM could convert F-actin (50 mM KCl) to paracrystalline (P) actin; the reverse titration (0 to 200 mM KCl in the presence of 20 mM MgCl2) was less complete. Addition of DNase I to G- or F-actin gave the expected amorphous electron micrographic pattern, and the actin was not sedimentable at (400,000 x g x h). EPR showed that the actin was in the G conformation. Addition of DNase I to paracrystalline actin gave the F conformation (EPR) but the actin was "G" by electron microscopy. Phalloidin converted G-actin to F-actin, had no effect on F-actin, and converted P-actin to the F state by electron microscopy but maintained the P conformation by EPR. Cytochalasin B produced no effects observable by EPR or centrifugation but "untwisted" paracrystals into nets. Since actin retained its P conformation by EPR in two states which were morphologically not P, we conclude that the P state is a distinct conformation of the actin molecule and that actin filaments aggregate to form bundles (and eventually paracrystals) when actin monomers are able to enter the P conformation.     

The effects of insulin,cycloheximide and phalloidin on the content of actin and p35 in extracts prepared from the nuclear fraction of Krebs II ascites cells

The nuclear fraction isolated from Krebs II ascites cells following cell disruption by nitrogen cavitation was separated into four fractions by salt/detergent extraction: NP-40 soluble fraction, 130 mM KCl extract, DOC/Triton × 100 soluble fraction and salt/detergent treated nuclei. The protein composition of the individual fractions was studied by SDS-PAGE and the relative amounts of actin and a 35 kDa protein (p35) were measured from gel scans. There was a time-dependent shift of actin from the 130 mM KCl extract to the NP-40 soluble fraction upon storage of the nuclear fraction on ice, indicating a progressive depolymerization of microfilaments. Compared with actin there was a slower release of p35 into the NP-40 soluble fraction. The results suggest that p35 is not integrated in the microfilament network. Phalloidin, which stabilizes the microfilaments, enriched the amount of both proteins in the 130 mM KCl extracts, together with a series of other proteins in the range 50–205 kDa. The presence of phalloidin also resulted in a large increase in the actin content in both the DOC/Triton × 100 extract and the fraction containing salt/detergent treated nuclei. Incubation of cells with insulin and/or cycloheximide enriched the amount of actin in the 130 mM KCl fraction. The results show that short term incubation of cells with phalloidin, insulin or cycloheximide increases the actin content of the nuclear fraction and also affects the presence of several other proteins.     

A mosaic multiple-binding model for the binding of caldesmon and myosin subfragment-1 to actin.

Binding of caldesmon to actin causes a decrease in the quantity of bound myosin and results in a reduction in the rate of actin-activated adenosine triphosphate hydrolysis. It is generally assumed that the binding of caldesmon and myosin to actin is a pure competitive interaction. However, recent binding studies of enzyme digested caldesmon subfragments directed at mapping the actin binding site of caldesmon have shown that a small 8-kD fragment around the COOH-terminal can compete directly with the myosin subfragment 1 (S-1) binding to actin; at least one other fragment that binds to actin does not inhibit the actin-activated adenosine triphosphate activity of myosin. That is, only a part of the caldesmon sequence may be responsible for directly blocking the binding of S-1 to actin. This prompts us to question the actual mode of binding of intact caldesmon and myosin S-1 to actin: whether the entire intact caldesmon molecule is competing with S-1 binding (pure competitive model) or just a small part of it (mosaic multiple-binding model). To answer this question, we measured the amount of myosin S-1 and caldesmon bound per actin monomer as a function of the total concentration of S-1 added to the system at constant concentrations of actin and caldesmon. A formalism for calculating the titration data based on the pure competitive model and a mosaic multiple-binding model was then developed. When compared with theoretical calculations, it is found that the binding of caldesmon and S-1 to actin cannot be pure competitive if no cooperativity exists between S-1 and caldesmon.(ABSTRACT TRUNCATED AT 250 WORDS)