Adenosine triphosphate-dependent degradation of a fluorescent lambda N substrate mimic by Lon protease

Escherichia coli Lon exhibits a varying degree of energy requirement toward hydrolysis of different substrates. Efficient degradation of protein substrates requires the binding and hydrolysis of ATP such that the intrinsic ATPase of Lon is enhanced during protein degradation. Degradation of synthetic tetrapeptides, by contrast, is achieved solely by ATP binding with concomitant inhibition of the ATPase activity. In this study, a synthetic peptide (FRETN 89-98), containing residues 89-98 of lambda N protein and a fluorescence donor (anthranilamide) and quencher (3-nitrotyrosine), has been examined for ATP-dependent degradation by E. coli and human Lon proteases. The cleavage profile of FRETN 89-98 by E. coli Lon resembles that of lambda N degradation. Both the peptide and protein substrates are specifically cleaved between Cys93 and Ser94 with concomitant stimulation of Lon's ATPase activity. Furthermore, the degradation of FRETN 89-98 is supported by ATP and AMPPNP but not ATPgammaS nor AMPPCP. FRETN 89-98 hydrolysis is eight times more efficient in the presence of 0.5 mM ATP compared to 0.5 mM AMPPNP at 86 microM peptide. The ATP-dependent hydrolysis of FRETN 89-98 displays sigmodial kinetics. The k(cat), [S](0.5), and the Hill coefficient of FRETN 89-98 degradation are 3.2 +/- 0.3 s(-1), 106 +/- 21 microM, and 1.6 respectively.     

Resolving individual steps in the operation of ATP-dependent proteolytic molecular machines: from conformational changes to substrate translocation and processivity

Clp, Lon, and FtsH proteases are proteolytic molecular machines that use the free energy of ATP hydrolysis to unfold protein substrates and processively present them to protease active sites. Here we review recent biochemical and structural studies relevant to the mechanism of ATP-dependent processive proteolysis. Despite the significant structural differences among the Clp, Lon, and FtsH proteases, these enzymes share important mechanistic features. In these systems, mechanistic studies have provided evidence for ATP binding and hydrolysis-driven conformational changes that drive translocation of substrates, which has significant implications for the processive mechanism of proteolysis. These studies indicate that the nucleotide (ATP, ADP, or nonhydrolyzable ATP analogues) occupancy of the ATPase binding sites can influence the binding mode and/or binding affinity for protein substrates. A general mechanism is proposed in which the communication between ATPase active sites and protein substrate binding regions coordinates a processive cycle of substrate binding, translocation, proteolysis, and product release.     

Transient kinetic experiments demonstrate the existence of a unique catalytic enzyme form in the peptide-stimulated ATPase mechanism of Escherichia coli Lon protease

Lon is an oligomeric serine protease whose proteolytic activity is mediated by ATP hydrolysis. Although each monomeric subunit has an identical sequence, Lon contains two types of ATPase sites that hydrolyze ATP at drastically different rates. The catalytic low-affinity sites display pre-steady-state burst kinetics and hydrolyze ATP prior to peptide cleavage. The high-affinity sites are able to hydrolyze ATP at a very slow rate. By utilizing the differing Kd's, the high-affinity site can be blocked with unlabeled nucleotide while the activity at the low-affinity site is monitored. Little kinetic data are available that describe microscopic events along the reaction pathway of Lon. In this study we utilize MANT-ATP, a fluorescent analogue of ATP, to monitor the rate constants for binding of ATP as well as the release of ADP from Escherichia coli Lon protease. All of the adenine nucleotides tested bound to Lon on the order of 10(5) M(-1) s(-1), and the previously proposed conformational change associated with nucleotide binding was also detected. On the basis of the data obtained in this study we propose that the rate of ADP release is slightly different for the two ATPase sites. As the model peptide substrate [S2; YRGITCSGRQK(Bz)] [Thomas-Wohlever, J., and Lee, I. (2002) Biochemistry 41, 9418-9425] or the protein substrate casein affects only the steady-state ATPase activity of the low-affinity sites, we propose that Lon adopts a different form after its first turnover as an ATP-dependent protease. Based on the obtained rate constants, a revised kinetic model is presented for ATPase activity in Lon protease in both the absence and presence of the model peptide substrate (S2).     

A membrane-bound archaeal Lon protease displays ATP-independent proteolytic activity towards unfolded proteins and ATP-dependent activity for folded proteins

In contrast to the eucaryal 26S proteasome and the bacterial ATP-dependent proteases, little is known about the energy-dependent proteolysis in members of the third domain, Archae. We cloned a gene homologous to ATP-dependent Lon protease from a hyperthermophilic archaeon and observed the unique properties of the archaeal Lon. Lon from Thermococcus kodakaraensis KOD1 (Lon(Tk)) is a 70-kDa protein with an N-terminal ATPase domain belonging to the AAA(+) superfamily and a C-terminal protease domain including a putative catalytic triad. Interestingly, a secondary structure prediction suggested the presence of two transmembrane helices within the ATPase domain and Western blot analysis using specific antiserum against the recombinant protein clearly indicated that Lon(Tk) was actually a membrane-bound protein. The recombinant Lon(Tk) possessed thermostable ATPase activity and peptide cleavage activity toward fluorogenic peptides with optimum temperatures of 95 and 70 degrees C, respectively. Unlike the enzyme from Escherichia coli, we found that Lon(Tk) showed higher peptide cleavage activity in the absence of ATP than it did in the presence of ATP. When three kinds of proteins with different thermostabilities were examined as substrates, it was found that Lon(Tk) required ATP for degradation of folded proteins, probably due to a chaperone-like function of the ATPase domain, along with ATP hydrolysis. In contrast, Lon(Tk) degraded unfolded proteins in an ATP-independent manner, suggesting a mode of action in Lon(Tk) different from that of its bacterial counterpart.     

Mechanistic studies of Escherichia coli adenosine-5'-phosphosulfate kinase

Adenosine-5'-phosphosulfate kinase (APS kinase) catalyzes the formation of 3'-phosphoadenosine 5'-phosphosulfate (PAPS), the major form of activated sulfate in biological systems. The enzyme from Escherichia coli has complex kinetic behavior, including substrate inhibition by APS and formation of a phosphorylated enzyme (E-P) as a reaction intermediate. The presence of a phosphorylated enzyme potentially enables the steady-state kinetic mechanism to change from sequential to ping-pong as the APS concentration decreases. Kinetic and equilibrium binding measurements have been used to evaluate the proposed mechanism. Equilibrium binding studies show that APS, PAPS, ADP, and the ATP analog AMPPNP each bind at a single site per subunit; thus, substrates can bind in either order. When ATPgammaS replaces ATP as substrate the V(max) is reduced 535-fold, the kinetic mechanism is sequential at each APS concentration, and substrate inhibition is not observed. The results indicate that substrate inhibition arises from a kinetic phenomenon in which product formation from ATP binding to the E. APS complex is much slower than paths in which product formation results from APS binding either to the E. ATP complex or to E-P. APS kinase requires divalent cations such as Mg(2+) or Mn(2+) for activity. APS kinase binds one Mn(2+) ion per subunit in the absence of substrates, consistent with the requirement for a divalent cation in the phosphorylation of APS by E-P. The affinity for Mn(2+) increases 23-fold when the enzyme is phosphorylated. Two Mn(2+) ions bind per subunit when both APS and the ATP analog AMPPNP are present, indicating a potential dual metal ion catalytic mechanism.     

Examination of the kinetic mechanism of mitogen-activated protein kinase activated protein kinase-2

The kinetic mechanism of mitogen-activated protein kinase activated protein kinase-2 (MAPKAPK2) was investigated using a peptide (LKRSLSEM) based on the phosphorylation site found in serum response factor (SRF). Initial velocity studies yielded a family of double-reciprocal lines that appear parallel and indicative of a ping-pong mechanism. The use of dead-end inhibition studies did not provide a definitive assignment of a reaction mechanism. However, product inhibition studies suggested that MAPKAPK2 follows an ordered bi-bi kinetic mechanism, where ATP must bind to the enzyme prior to the SRF-peptide and the phosphorylated product is released first, followed by ADP. In agreement with these latter results, surface plasmon resonance measurements demonstrate that the binding of the inhibitor peptide to MAPKAPK2 requires the presence of ATP. Furthermore, competitive inhibitors of ATP, adenosine 5'-(beta,gamma-imino)triphosphate (AMPPNP) and a staurosporine analog (K252a), can inhibit this ATP-dependent binding providing further evidence that the peptide substrate binds preferably to the E:ATP complex.     

Monitoring the timing of ATP hydrolysis with activation of peptide cleavage in Escherichia coli Lon by transient kinetics

Escherichia coli Lon, also known as protease La, is an oligomeric ATP-dependent protease, which functions to degrade damaged and certain short-lived regulatory proteins in the cell. To investigate the kinetic mechanism of E. coli Lon protease, we performed the first pre-steady-state kinetic characterization of the ATPase and peptidase activities of this enzyme. Using rapid quench-flow and fluorescence stopped-flow spectroscopy techniques, we demonstrated that ATP hydrolysis occurs before peptide cleavage, with the former reaction displaying a burst and the latter displaying a lag in product production. The detection of burst kinetics in ATP hydrolysis is indicative of a step after nucleotide hydrolysis being rate-limiting in ATPase turnover. At saturating substrate concentrations, the lag rate constant for peptide cleavage is comparable to the kcat of ATPase, indicating that two hydrolytic processes are coordinated during the first enzyme turnover. The involvement of subunit interaction during enzyme catalysis was detected as positive cooperativity in the binding and hydrolysis of substrates, as well as apparent asymmetry in the ATPase activity in Lon. When our data are taken together, they are consistent with a reaction model in which ATP hydrolysis is used to generate an active enzyme form that hydrolyzes peptide.     

Proteolysis Coupled to ATP Hydrolysis: Regulation of the Activity of Proteolytic Sites of Lon Protease from Escherichia coli

Regulation of activity of the proteolytic sites of Lon protease was studied. It was found that ATP–Mg has the properties of a noncompetitive activator of peptidase sites. The processive mechanism of the hydrolysis of protein substrates by Lon protease was experimentally confirmed under the conditions of ATP hydrolysis. It was shown that the oligomeric state of the enzyme is the necessary prerequisite for the processive proteolysis by native Lon protease. The study of the properties of the mixed mutant Lon-K362Q/S679A confirmed the existence of intra- and intersubunit pathways of signal transduction from the ATPase to proteolytic sites. The mutual influence of substrates of Lon protease was studied, and the existence of cooperative interactions between the peptidase sites in the oligomeric enzyme was suggested.     

Proteolysis coupled with ATP. Regulation of activity of proteolytic centers of Escherichia coli lon protease

Regulation of activity of the proteolytic sites of Lon protease was studied. It was found that ATP-Mg has the properties of a noncompetitive activator of peptidase sites. The processive mechanism of the hydrolysis of protein substrates by Lon protease was experimentally confirmed under the conditions of ATP hydrolysis. It was shown that the oligomeric state of the enzyme is the necessary prerequisite for the processive proteolysis by the native Lon protease. The study of the properties of the mixed mutant Lon-K362Q/S679A confirmed the existence of the intra- and intersubunit pathways of signal transduction from the ATPase to proteolytic sites. The mutual influence of substrates of Lon protease was studied, and the existence of cooperative interactions between the peptidase sites in the oligomeric enzyme was suggested.     

Multidrug resistance protein 4 (ABCC4)-mediated ATP hydrolysis: effect of transport substrates and characterization of the post-hydrolysis transition state

Multidrug resistance protein 4 (MRP4/ABCC4), transports cyclic nucleoside monophosphates, nucleoside analog drugs, chemotherapeutic agents, and prostaglandins. In this study we characterize ATP hydrolysis by human MRP4 expressed in insect cells. MRP4 hydrolyzes ATP (Km, 0.62 mm), which is inhibited by orthovanadate and beryllium fluoride. However, unlike ATPase activity of P-glycoprotein, which is equally sensitive to both inhibitors, MRP4-ATPase is more sensitive to beryllium fluoride than to orthovanadate. 8-Azido[alpha-32P]ATP binds to MRP4 (concentration for half-maximal binding approximately 3 microm) and is displaced by ATP or by its non-hydrolyzable analog AMPPNP (concentrations for half-maximal inhibition of 13.3 and 308 microm). MRP4 substrates, the prostaglandins E1 and E2, stimulate ATP hydrolysis 2- to 3-fold but do not affect the Km for ATP. Several other substrates, azidothymidine, 9-(2-phosphonylmethoxyethyl)adenine, and methotrexate do not stimulate ATP hydrolysis but inhibit prostaglandin E2-stimulated ATP hydrolysis. Although both post-hydrolysis transition states MRP4.8-azido[alpha-32P]ADP.Vi and MRP4.8-azido[alpha-32P]ADP.beryllium fluoride can be generated, nucleotide trapping is approximately 4-fold higher with beryllium fluoride. The divalent cations Mg2+ and Mn2+ support comparable levels of nucleotide binding, hydrolysis, and trapping. However, Co2+ increases 8-azido[alpha-32P]ATP binding and beryllium fluoride-induced 8-azido[alpha-32P]ADP trapping but does not support steady-state ATP hydrolysis. ADP inhibits basal and prostaglandin E2-stimulated ATP hydrolysis (concentrations for half-maximal inhibition 0.19 and 0.25 mm, respectively) and beryllium fluoride-induced 8-azido[alpha-32P]ADP trapping, whereas Pi has no effect up to 20 mm. In aggregate, our results demonstrate that MRP4 exhibits substrate-stimulated ATP hydrolysis, and we propose a kinetic scheme suggesting that ADP release from the post-hydrolysis transition state may be the rate-limiting step during the catalytic cycle.     

Peptidyl boronates inhibit Salmonella enterica serovar Typhimurium Lon protease by a competitive ATP-dependent mechanism

Lon is a homo-oligomeric ATP-dependent serine protease that functions in the degradation of damaged and certain regulatory proteins. This enzyme has emerged as a novel target in the development of antibiotics because of its importance in conferring bacterial virulence. In this study, we explored the mechanism by which the proteasome inhibitor MG262, a peptidyl boronate, inhibits the peptide hydrolysis activity of Salmonella enterica serovar Typhimurium Lon. In addition, we synthesized a fluorescent peptidyl boronate inhibitor based upon the amino acid sequence of a product of peptide hydrolysis by the enzyme. Using steady-state kinetic techniques, we have shown that two peptidyl boronate variants are competitive inhibitors of the peptide hydrolysis activity of Lon and follow the same two-step, time-dependent inhibition mechanism. The first step is rapid and involves binding of the inhibitor and formation of a covalent adduct with the active site serine. This is followed by a second slow step in which Lon undergoes a conformational change or isomerization to increase the interaction of the inhibitor with the proteolytic active site to yield an overall inhibition constant of 5-20 nM. Although inhibition of serine and threonine proteases by peptidyl boronates has been detected previously, Lon is the first protease that has required the binding of ATP in order to observe inhibition.     

Kinetic mechanism of phosphofructokinase-2 from Escherichia coli. A mutant enzyme with a different mechanism

The kinetic mechanisms of Escherichia coli phosphofructokinase-2 (Pfk-2) and of the mutant enzyme Pfk-2 were investigated. Initial velocity studies showed that both enzymes have a sequential kinetic mechanism, indicating that both substrates must bind to the enzyme before any products are released. For Pfk-2, the product inhibition kinetics was as follows: fructose-1,6-P2 was a competitive inhibitor versus fructose-6-P at two ATP concentrations (0.1 and 0.4 mM), and noncompetitive versus ATP. The other product inhibition patterns, ADP versus either ATP or fructose-6-P were noncompetitive. Dead-end inhibition studies with an ATP analogue, adenylyl imidodiphosphate, showed uncompetitive inhibition when fructose-6-P was the varied substrate. For Pfk-2, the product inhibition studies revealed that ADP was a competitive inhibitor versus ATP at two fructose-6-P concentrations (0.05 and 0.5 mM), and noncompetitive versus fructose-6-P. The other product, fructose-1, 6-P2, showed noncompetitive inhibition versus both substrates, ATP and fructose-6-P. Sorbitol-6-P, a dead-end inhibitor, exhibited competitive inhibition versus fructose-6-P and uncompetitive versus ATP. These results are in accordance with an Ordered Bi Bi reaction mechanism for both enzymes. In the case of Pfk-2, fructose-6-P would be the first substrate to bind to the enzyme, and fructose-1,6-P2 the last product to be released. For Pfk-2, ATP would be the first substrate to bind to the enzyme, and APD the last product to be released.     

Cooperative binding of ATP and RNA substrates to the DEAD/H protein DbpA

Unlike most DEAD/H proteins, the purified Escherichia coli protein DbpA demonstrates high specificity for its 23S rRNA substrate in vitro. Here we describe several assays designed to characterize the interaction of DbpA with its RNA and ATP substrates. Electrophoretic mobility shift assays reveal a sub-nanomolar binding affinity for a 153 nucleotide RNA substrate (R153) derived from the 23S rRNA. High affinity RNA binding requires both hairpin 92 and helix 90, as substrates lacking these structures bind DbpA with lower affinity. AMPPNP inhibition assays and ATP/ADP binding assays provide binding constants for ATP and ADP to DbpA with and without RNA substrates. These data have been used to describe a minimal thermodynamic scheme for the binding of the RNA and ATP substrates to DbpA, which reveals cooperative binding between larger RNAs and ATP with cooperative energies of approximately 1.3 kcal mol(-1). This cooperativity is lost upon removal of helix 89 from R153, suggesting this helix is either the preferred target for DbpA's helicase activity or is a necessary structural element for organization of the target site within R153.     

Detection and characterization of two ATP-dependent conformational changes in proteolytically inactive Escherichia coli Lon mutants by stopped flow kinetic techniques

Lon is an ATP dependent serine protease responsible for degrading denatured, oxidatively damaged and certain regulatory proteins in the cell. In this study we exploited the fluorescence properties of a dansylated peptide substrate (S4) and the intrinsic Trp residues in Lon to monitor peptide interacting with the enzyme. We generated two proteolytically inactive Lon mutants, S679A and S679W, where the active site serine is mutated to an Ala and Trp residue, respectively. Stopped-flow fluorescence spectroscopy was used to identify key enzyme intermediates generated along the reaction pathway prior to peptide hydrolysis. A two-step peptide binding event is detected in both mutants, where a conformational change occurs after a rapid equilibrium peptide binding step. The Kd for the initial peptide binding step determined by kinetic and equilibrium binding techniques is approximately 164 micromolar and 38 micromolar, respectively. The rate constants for the conformational change detected in the S679A and S679W Lon mutants are 0.74 +/- 0.10 s(-1) and 0.57 +/- 0.10 s(-1), respectively. These values are comparable to the lag rate constant determined for peptide hydrolysis (klag approximately 1 s(-1)) [Vineyard, D., et al. (2005) Biochemistry 45, 4602-4610]. Replacement of the active site Ser with Trp (S679W) allows for the detection of an ATP-dependent conformational change within the proteolytic site. The rate constant for this conformational change is 7.6 +/- 1.0 s(-1), and is essentially identical to the burst rate constant determined for ATP hydrolysis under comparable reaction conditions. Collectively, these kinetic data support a mechanism by which the binding of ATP to an allosteric site on Lon activates the proteolytic site. In this model, the energy derived from the binding of ATP minimally supports peptide cleavage by allowing peptide substrate access to the proteolytic site. However, the kinetics of peptide cleavage are enhanced by the hydrolysis of ATP.     

Kinetic mechanism of glutathione synthetase from Arabidopsis thaliana

Glutathione synthetase (GS) catalyzes the ATP-dependent formation of the ubiquitous peptide glutathione from gamma-glutamylcysteine and glycine. The bacterial and eukaryotic GS form two distinct families lacking amino acid sequence homology. Moreover, the detailed kinetic mechanism of the bacterial and the eukaryotic GS remains unclear. Here we have overexpressed Arabidopsis thaliana GS (AtGS) in an Escherichia coli expression system and purified the recombinant enzyme for biochemical characterization. AtGS is functional as a homodimeric protein with steady-state kinetic properties similar to those of other eukaryotic GS. The kinetic mechanism of AtGS was investigated using initial velocity methods and product inhibition studies. The best fit of the observed data was to the equation for a random Ter-reactant mechanism in which dependencies between the binding of some substrate pairs were preferred. The binding of either ATP or gamma-glutamylcysteine increased the binding affinity of AtGS for the other substrate by 10-fold. Likewise, the binding of ATP or glycine increased binding affinity for the other ligand by 3.5-fold. In contrast, binding of either glycine or gamma-glutamylcysteine causes a 6.7-fold decrease in binding affinity for the second molecule. Product inhibition studies suggest that ADP is the last product released from the enzyme. Overall, these observations are consistent with a random Ter-reactant mechanism for the eukaryotic GS in which the binding order of certain substrates is kinetically preferred for catalysis.     

Single-turnover kinetic experiments confirm the existence of high- and low-affinity ATPase sites in Escherichia coli Lon protease

Lon is an ATP-dependent serine protease that degrades damaged and certain regulatory proteins in vivo. Lon exists as a homo-oligomer and represents one of the simplest ATP-dependent proteases because both the protease and ATPase domains are located within each monomeric subunit. Previous pre-steady-state kinetic studies revealed functional nonequivalency in the ATPase activity of the enzyme [Vineyard, D., et al. (2005) Biochemistry 44, 1671-1682]. Both a high- and low-affinity ATPase site has been previously reported for Lon [Menon, A. S., and Goldberg, A. L. (1987) J. Biol. Chem. 262, 14921-14928]. Because of the differing affinities for ATP, we were able to monitor the activities of the sites separately and determine that they were noninteracting. The high-affinity sites hydrolyze ATP very slowly (k(obs) = 0.019 +/- 0.002 s(-1)), while the low-affinity sites hydrolyze ATP quickly at a rate of 17.2 +/- 0.09 s(-1), which is comparable to the previously observed burst rate. Although the high-affinity sites hydrolyze ATP slowly, they support multiple rounds of peptide hydrolysis, indicating that ATP and peptide hydrolysis are not stoichiometrically linked. However, ATP binding and hydrolysis at both the high- and low-affinity sites are necessary for optimal peptide cleavage and the stabilization of the conformational change associated with nucleotide binding.     

Protease La, the lon gene product, cleaves specific fluorogenic peptides in an ATP-dependent reaction

Protease La is an ATP-dependent protease that catalyzes the rapid degradation of abnormal proteins and certain normal polypeptides in Escherichia coli. In order to learn more about its specificity and the role of ATP, we tested whether small fluorogenic peptides might serve as substrates. In the presence of ATP and Mg2+, protease La hydrolyzes two oligopeptides that are also substrates for chymotrypsin, glutaryl-Ala-Ala-Phe-methoxynaphthylamine (MNA) and succinyl-Phe-Leu-Phe-MNA. Methylation or removal of the acidic blocking group prevented hydrolysis. Closely related peptides (glutaryl-Gly-Gly-Phe-MNA and glutaryl-Ala-Ala-Ala-MNA) are cleaved only slightly, and substrates of trypsin-like proteases are not hydrolyzed. Furthermore, several peptide chloromethyl ketone derivatives that inhibit chymotrypsin and cathepsin G (especially benzyloxycarbonyl-Gly-Leu-Phe-chloro-methyl ketone), inhibited protease La. Thus its active site prefers peptides containing large hydrophobic residues, and amino acids beyond the cleavage site influence rates of hydrolysis. Peptide hydrolysis resembles protein breakdown by protease La in many respects: 1) ADP inhibits this process rapidly, 2) DNA stimulates it, 3) heparin, diisopropyl fluorophosphate, and benzoyl-Arg-Gly-Phe-Phe-Leu-MNA inhibit hydrolysis, 4) the reaction is maximal at pH 9.0-9.5, 5) the protein purified from lon- E. coli or Salmonella typhymurium showed no activity against the peptide, and that from lonR9 inhibited peptide hydrolysis by the wild-type enzyme. With partially purified enzyme, peptide hydrolysis was completely dependent on ATP. The pure protease hydrolyzed the peptide slowly when only Mg2+, Ca2+, or Mn2+ were present, and ATP enhanced this activity 6-15-fold (Km = 3 microM). Since these peptides cannot undergo phosphorylation, adenylylation, modification of amino groups, or denaturation, these mechanisms cannot account for the stimulation by ATP. Most likely, ATP and Mg2+ affect the conformation of the enzyme, rather than that of the substrate.     

Identification of the proteasome inhibitor MG262 as a potent ATP-dependent inhibitor of the Salmonella enterica serovar Typhimurium Lon protease

Lon is a homo-oligomeric ATP-dependent serine protease which functions in the degradation of damaged and certain regulatory proteins. The importance of Lon activity in bacterial pathogenicity has led to its emergence as a target in the development of novel antibiotics. As no potent inhibitors of Lon activity have been reported to date, we sought to identify an inhibitor which could serve as a lead compound in the development of a potent Lon-specific inhibitor. To determine whether a nucleotide- or peptide-based inhibitor would be more effective, we evaluated the steady-state kinetic parameters associated with both ATP and peptide hydrolysis by human and Salmonella enterica serovar Typhimurium Lon. Although the ATP hydrolysis activities of both homologues are kinetically indistinguishable, they display marked differences in peptide substrate specificity. This suggests that a peptide-based inhibitor could be developed which would target bacterial Lon, thereby decreasing side-effects due to cross-reactivity with human Lon. Using Salmonella enterica serovar Typhimurium Lon as a model, we evaluated the IC50 values of a series of commercially available peptide-based inhibitors. Those inhibitors which behave as transition state analogues were the most useful in inhibiting Lon activity. The peptidyl boronate, MG262, was the most potent inhibitor tested (IC50 = 122 +/- 9 nM) and required binding, but not hydrolysis, of ATP to initiate inhibition. We hope to use MG262 as a lead compound in the development of future Lon-specific inhibitors.     

DNA and RNA binding by the mitochondrial lon protease is regulated by nucleotide and protein substrate

The ATP-dependent Lon protease belongs to a unique group of proteases that bind DNA. Eukaryotic Lon is a homo-oligomeric ring-shaped complex localized to the mitochondrial matrix. In vitro, human Lon binds specifically to a single-stranded GT-rich DNA sequence overlapping the light strand promoter of human mitochondrial DNA (mtDNA). We demonstrate that Lon binds GT-rich DNA sequences found throughout the heavy strand of mtDNA and that it also interacts specifically with GU-rich RNA. ATP inhibits the binding of Lon to DNA or RNA, whereas the presence of protein substrate increases the DNA binding affinity of Lon 3.5-fold. We show that nucleotide inhibition and protein substrate stimulation coordinately regulate DNA binding. In contrast to the wild type enzyme, a Lon mutant lacking both ATPase and protease activity binds nucleic acid; however, protein substrate fails to stimulate binding. These results suggest that conformational changes in the Lon holoenzyme induced by nucleotide and protein substrate modulate the binding affinity for single-stranded mtDNA and RNA in vivo. Co-immunoprecipitation experiments show that Lon interacts with mtDNA polymerase gamma and the Twinkle helicase, which are components of mitochondrial nucleoids. Taken together, these results suggest that Lon participates directly in the metabolism of mtDNA.     

Effects of adenosine triphosphate on N-ethylmaleimide-induced modification of 30S dynein from Tetrahymena cilia.

Ciliary 30S dynein of Tetrahymena was investigated with regard to modification of the ATPase activity with N-ethylmaleimide (NEM) in the presence of ATP. The elevation of enzyme activity due to the modification was largely repressed by addition of ATP at a concentration of 1 mM or more during preincubation of 20 h at 0 degrees C. The repression was highly specific for ATP, though ADP and AMPPNP showed slight repressive effects. After complete hydrolysis of ATP added to the preincubation mixture, however, elevation of 30S dynein ATPase activity occurred. It is suggested that the repression by ATP of NEM-induced elevation of 30S dynein ATPase activity is simply due to a protecting effect of ATP on certain SH group(s) (probably SH1-type group(s)) around the active center of 30S dynein. When 30S dynein was maximally activated by modification with NEM, ATP or ADP did not significantly promote the inactivation of the modified enzyme upon further treatment with NEM, indicating that 30S dynein lacks the characteristics of SH2-type groups. On the other hand, ATP also showed a protective effect against inhibition of native 30S dynein by high concentrations of NEM. High concentrations of ADP and AMPPNP were inhibitory to 30S dynein ATPase activity but inorganic phosphate did not inhibit 14S or 30S dynein ATPase activities at all.