Differential effects of molybdate on the hydrodynamic and DNA-binding properties of the non-activated and activated forms of the androgen receptor in calf uterus

Calf uterine cytosol contains an androgen receptor with a relative molecular mass of approx. 90,000. In this study we have analysed the structure and aggregation properties of the androgen receptor, using sucrose density gradient centrifugation on a vertical rotor (VTi65). In the presence of 10 mM NaCl the androgen receptor in whole cytosol sedimented at 8 S irrespective of the presence of molybdate. In 400 mM NaCl the receptor dissociated to a 4.3 S entity. In whole cytosol molybdate promoted a partial shift of the 4.3 S receptor into the aggregated 8 S state. The time of exposure of the receptor to molybdate and NaCl determined the proportion of receptor sedimentating at 8 S and 4.3 S. The DNA-binding form of the uterine androgen receptor when analysed under the conditions of the DNA-cellulose binding assay, sedimented at 6.5 S. Increasing concentrations of molybdate shifted its sedimentation coefficient gradually from 6.5 S to 4.5 S and in parallel reduced the DNA-binding capacity. Molybdate added to a partially purified, DNA-binding form of the androgen receptor did not promote receptor aggregation to faster sedimentating forms. This suggests that such preparations are devoid of an androgen receptor-aggregation factor. Indirect evidence for such a factor was obtained from reconstitution experiments with whole cytosol. Our results indicate that the DNA-binding form of the androgen receptor interacts with a cytosol factor to form the 8 S receptor complex. Molybdate has diverse effects: in the presence of the cytosol factor it stabilizes the 8S complex; in its absence molybdate prevents in a concentration-dependent way DNA-binding as well as reaggregation of the monomeric 4.3 S form.     

Ribonucleic acid association with androgen receptor from rat submandibular gland

The transformed androgen receptor from rat submandibular gland converts to a faster sedimenting form (6-8S) on a glycerol gradient centrifugation after withdrawal of a transformation-inducing reagent (KCl or ATP). In this report, the association of cytosolic RNA with the transformed androgen receptor was investigated as a possible mechanism of molecular conversion of the androgen receptor. When the transformed and converted androgen receptors were treated with RNase A, these receptors sedimented at 4.5S in a low-salt glycerol gradient. Addition of RNA from rat submandibular gland to the RNase-Sepharose-treated transformed receptor caused a shift of receptor peak from 4.5S to 5.8S. RNA from rat submandibular gland, yeast RNA and E. coli rRNA inhibited DNA-cellulose binding of a RNase-treated transformed receptor in the absence of molybdate. These observations suggest that conversion from the transformed 4S androgen receptor to a 6-8S form resulted from the association of RNA(s) with the transformed receptor.     

Interconversion of androgen receptor forms by divalent cations and 8 S androgen receptor-promoting factor. Effects of Zn2+, Cd2+, Ca2+, and Mg2+

The effects of divalent cations (Zn2+, Cd2+, Ca2+, Mg2+) on the cytosol androgen receptor were determined by sedimentation into sucrose gradients. At low ionic strength (25 mM KCl, 50 mM Tris, pH 7.4), Zn2+ (200 microM total, which calculates to 130 nM free Zn2+ in 10 mM mercaptoethanol) causes a shift in the sedimentation coefficient of the rat Dunning prostate tumor (R3327H) cytosol receptor and rat ventral prostate cytosol receptor from 7.5 +/- 0.3 S to 8.6 +/- 0.3 S. Zn2+ stabilizes the 8.6 S receptor form in salt concentrations up to 0.15 M KCl in 50 mM Tris, pH 7.2. In low ionic strength gradients containing Ca2+ (greater than or equal to 200 microM) or Mg2+ (greater than or equal to 1 mM), the receptor sediments as 4.7 +/- 0.3 S. The dissociating effects of Ca2+ and Mg2+ can be fully reversed by sedimentation into gradients containing Zn2+ (200 microM total) or Cd2+ (10 microM total). In the presence of Zn2+ (200 microM total), Ca2+ (10 microM to 3 mM) converts the receptor to an intermediate form with sedimentation coefficient 6.2 +/- 0.2 S, Stokes radius 73 A, and apparent Mr approximately 203,000. The potentiating effect of Zn2+ on formation of the 8.6 S receptor (in the absence of Ca2+) and the 6.2 S receptor (in the presence of Ca2+) requires both the 4.5 S receptor and the 8 S androgen receptor-promoting factor. Sodium molybdate stabilizes the untransformed cytosol receptor but, unlike Zn2+, does not promote reconstitution of the 8.6 S receptor from its partially purified components. These results indicate that divalent cations alter the molecular size of the androgen receptor in vitro and thus may have a role in altering the state of transformation of the receptor.     

Effects of antiestrogen versus antiprogestin on transformed and nontransformed steroid receptors

In order to determine if different physicochemical properties exist among antihormone-receptor complexes, we have compared the interaction of the antiprogestin RU486 with progesterone receptor (PR) versus the triphenylethylene antiestrogen H1285 (4-(N,N-diethyl-aminoethoxy)-4'-methoxy-alpha-(p-hydroxyphenyl-alp ha'- ethylstilbene] with estrogen receptor (ER) from rabbit uterine tissue. Contrary to other reports, we observed no difference in the sedimentation properties of transformed PR (4S) when bound by the antagonist RU486 versus the progesterone agonist R5020 in either cytosol or DEAE partially-purified receptor preparations analyzed on sucrose gradients containing 0.3 M KCl. In addition, we found no difference in the sedimentation properties of these receptor preparations in the presence of 10 mM sodium molybdate: the nontransformed RU486-PR and nontransformed R5020-PR both sedimented as a 6S species. These same results were obtained when the receptor preparation and gradient analysis were performed in the absence of monothioglycerol. Likewise, there was no change in the sedimentation properties of the transformed PR when the receptor, partially purified in the absence of molybdate, was analyzed on sucrose gradients containing 10 mM sodium molybdate to prevent receptor alteration during centrifugation. From DNA-cellulose assays performed with partially purified PR in the absence of molybdate we determined that the 4S form of R5020-PR and RU486-PR is transformed receptor; whereas in the presence of molybdate, the 6S species is nontransformed. In contrast, we found a different pattern of sedimentation when comparing transformed antiestrogen-receptor complexes with transformed estrogen-receptor complexes. In this case, transformed H1285-ER sedimented as 6S and estradiol-ER sedimented as 4S. We conclude from these experiments that these two antihormones, RU486 and H1285, may have different mechanisms of action in their antagonism of steroid hormone action. Antiestrogen stabilizes the salt-transformed ER as a dimer while antiprogestin appears to permit dissociation of the oligomeric form of the receptor to the monomeric form.     

Characterization of steroid hormone receptors with ion-exchange fast protein liquid chromatography

Androgen, estrogen and progesterone receptors have been characterized with anion exchange Fast Protein Liquid Chromatography (FPLC) on a Mono Q column (Pharmacia). In the presence of sodium molybdate androgen receptors in cytosols from rat prostate, rat epididymis and calf uterus eluted as a single sharp peak at 0.32 M NaCl with recoveries of approx 90%. The molybdate-stabilized form of the androgen receptor from rat prostate was purified about 75-fold. The receptor containing FPLC-peak fractions sedimented in high salt (0.4 M KCl) linear sucrose gradients at 3.6 S (prostate) and at 4.6 S (epididymis and calf uterus) respectively. Multiple forms of the androgen receptor were present in cytosols from rat prostate prepared in the absence of sodium molybdate, probably due to proteolytic breakdown of the native form. Calf uterine estradiol and progesterone receptors prepared in the presence of sodium molybdate (20 mM) eluted from the Mono Q column at 0.32 M NaCl. The molybdate-stabilized forms of the oestradiol and progesterone receptors were purified approx 70-fold and 30-fold respectively. In the absence of molybdate the estradiol receptor dissociated into two major forms eluting at 0.23 M NaCl and 0.37 M NaCl. After heat induced transformation (30 min at 25 degrees C) of the estradiol receptor one major peak was eluted at 0.42 M NaCl, indicating a change in the surface charge of the estradiol receptor as a result of the 4 S to 5 S transformation. It is concluded that the FPLC anion exchange system is a powerful, fast tool for characterization and partial purification of steroid receptors. In addition this technique could be applied as a rapid procedure for the quantitative estimation of steroid receptors in small biological samples.     

Involvement of a non-hormone-binding 90-kilodalton protein in the nontransformed 8S form of the rabbit uterus progesterone receptor

Nontransformed 8S progesterone receptor (8S-PR) was purified by hormone-specific affinity chromatography from rabbit uterine low-salt cytosol containing 20 mM molybdate. In the eluate obtained with radioactive progestin, sodium dodecyl sulfate-polyacrylamide electrophoresis (SDS-PAGE) showed the presence of several bands, including three that corresponded to approximately 90-, approximately 120-, and approximately 85-kDa proteins. None of these three proteins was found in the eluate of the affinity column when the molybdate-containing cytosol was chromatographed in the presence of nonradioactive progesterone ("mock purification"). Subsequent purification of the affinity eluate by DEAE-Sephacel chromatography gave a single radioactive receptor peak at 0.15 M KCl (approximately 20% yield, 19% purity on the basis of one binding site per approximately 100 kDa) with a sedimentation coefficient of 8.5 S. Silver staining after SDS-PAGE revealed that this purified 8S-PR fraction contained mainly the 120-, 90-, and 85-kDa proteins. [3H]R5020-labeled 8S-PR purified by DEAE-Sephacel column chromatography was UV irradiated, and after SDS-PAGE the 120- and 85-kDa proteins were revealed, but the 90-kDa protein was not.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interaction of the antiestrogen [3H]H1285 with the two forms of the molybdate-stabilized calf uterine estrogen receptor

The high affinity antiestrogen [3H]H1285 bound to the cytosol calf uterine estrogen receptor dissociated very slowly (t 1/2 approx 30 h at 20 degrees C) and did not demonstrate a change in dissociation rate in the presence of molybdate, which is characteristic of [3H]estradiol-receptor complexes. [3H]H1285-Receptor complexes sediment at approx 6S on 5-20% sucrose density gradients containing 0.3M KCl with or without 10 mM molybdate. This is in contrast to [3H]estradiol-receptor complexes which sedimented at approx 4.5S without molybdate and at approx 6S with molybdate. These results suggest a physicochemical difference in the estrogen receptor when occupied by antiestrogens versus estrogens. We recently reported that the cytoplasmic uterine estrogen receptor, when bound by estradiol and prepared in 10 mM molybdate, eluted from DEAE-Sephadex columns as Peak I (0.21 M KCl) & Peak II (0.25 M KCl). However, [3H]H1285 bound to the estrogen receptor eluted only as one peak at 0.21 M KCl, also suggesting that the initial interaction of antiestrogens with the estrogen receptor is different. We have extended these studies and report that H1285 can compete with [3H]estradiol for binding to both forms of the estrogen receptor and [3H]H1285 can bind to both forms if the unoccupied receptor is first separated by DEAE-Sephadex chromatography. However, if the receptor is first bound by unlabeled H1285, eluted from the column and post-labeled by exchange with [3H]estradiol, only one peak is measured. Thus, it appears that H1285 binding alters the properties of the receptor such that all receptor components seem to elute as one form. These partially purified [3H]H1285-receptor complexes obtained from DEAE-Sephadex columns sedimented as 5.5S in sucrose density gradients in contrast to the sedimentation values for the [3H]estradiol-receptor components eluting as Peak I (4.5S) and Peak II (6.3S). These differences in the physicochemical characteristics of the estrogen receptor when bound by estrogen versus antiestrogens may be related to some of the biological response differences induced by these ligands.     

In situ photolabelling of the human androgen receptor

In situ photoaffinity labelling of the human androgen receptor has been performed in the LNCaP (Lymph Node Carcinoma of the Prostate) cell line. The covalently labelled receptors were identified by SDS-PAGE. Intact LNCaP cells, incubated with [3H]-R1881 and subsequently irradiated with u.v. light and directly solubilized in SDS-buffer, revealed two photolabelled protein bands at 110 and 50 kDa. Irradiation of intact cells and subsequent isolation of nuclei followed by extraction with 0.5 M NaCl resulted in one major photolabelled protein band at 110 kDa. The labelling of this band could be completely suppressed by a 100-fold molar excess of non-radioactive R1881. Photolabelling of androgen receptors in a cytosolic preparation of LNCaP cells after anion exchange chromatography resulted in a much lower labelling efficiency compared with the in situ labelling procedure, although the androgen receptor was purified 100-fold. The steroid binding domain of the human androgen receptor has been partially mapped with chymotrypsin and S. aureus V8 protease digestion. Proteolytic digestion with chymotrypsin of purified photoaffinity-labelled 110 kDa human androgen receptor resulted in the generation of a 15 kDa peptide which still contains the covalently linked hormone. It is concluded that the in situ photoaffinity labelling technique can be applied successfully for characterization of the steroid binding domain of androgen receptors in prostate cancer cells and in other androgen target cells. Furthermore, it was demonstrated that the human androgen receptor is a monomer with a molecular mass of 110 kDa, of which the steroid binding site is confined to a 15 kDa domain.     

Sodium molybdate converts the RNA-associated transformed, oligomeric form of the glucocorticoid receptor into the transformed, monomeric form

The glucocorticoid receptor from rat liver cytosol prepared in 2 ml buffer/g tissue sedimented at approximately 10 S in low salt density gradient centrifugation without molybdate. When the receptor was heated at 25 degrees C, both approximately 10 S and approximately 7 S forms were seen in low salt gradient. The approximately 10 S form was not capable of binding to DNA-cellulose and was stabilized by sodium molybdate, namely it corresponded to untransformed receptor. The approximately 7 S form was capable of binding to DNA-cellulose and regarded as transformed receptor. On the other hand, partially-purified transformed receptor labeled with [3H]dexamethasone-21-mesylate sedimented at approximately 5 S, which migrated as a approximately 94 kDa species in SDS-polyacrylamide gel electrophoresis. The reconstitution analysis of this partially-purified approximately 5 S receptor and liver cytosol, showed the shift to approximately 7 S form. RNase A or T1 converted approximately 7 S transformed form into approximately 5 S but it did not affect approximately 10 S untransformed form. 5-20 mM sodium molybdate also shifted approximately 7 S to approximately 5 S. These results indicate that the approximately 7 S transformed form of the glucocorticoid receptor observed in low salt conditions might be an oligomer, probably including both approximately 5 S steroid-binding component and RNA/ribonucleoprotein, and that molybdate dissociates these interactions in a specific manner.     

Androgen receptor binding to nuclear matrix in vitro and its inhibition by 8S androgen receptor promoting factor

The partially purified 4.5S [3H]dihydrotestosterone receptor binds to nuclear matrix isolated from rat Dunning prostate tumor with properties similar to those reported for androgen receptor binding in intact nuclei [Colvard, D.S., & Wilson, E.M. (1984) Biochemistry (preceding paper in this issue)] in that it requires Zn2+ and mercaptoethanol, is saturable, and is temperature dependent and of high affinity (Ka approximately 10(13) M-1). On a milligrams of DNA equivalent basis, the extent of matrix binding of androgen receptor (700 fmol of receptor bound/mg of matrix protein) is similar to that of intact nuclei, corresponding to approximately 1400 sites/nucleus. Association rate constants (ka) for 4.5S androgen receptor binding to matrix at 0, 15, and 25 degrees C are 2.7 X 10(5), 1.2 X 10(6), and 2.4 X 10(6) M-1 min-1, respectively, indicating an energy of activation of 15 kcal/mol. Up to 50% of matrix-bound receptor is extractable in buffer containing 3 mM ethylenediaminetetraacetic acid plus either 0.4 M KCl or 5 mM pyridoxal 5'-phosphate. A protein fraction designated 8S androgen receptor promoting factor that promotes conversion of the 4.5S androgen receptor to 8 S [Colvard, D. S., & Wilson, E. M. (1981) Endocrinology (Baltimore) 109, 496-504] has been further purified and found to inhibit the binding of the 4.5S androgen receptor to isolated nuclei and nuclear matrix in a concentration-dependent manner. The results support the hypothesis that the 8S steroid receptor is a complex of the activated 4.5S androgen receptor with a non-steroid binding protein that renders the receptor incapable of binding in nuclei.     

Identification and partial characterization of the cytoplasmic androgen receptor in bovine ovarian capsule

[3H]Dihydrotestosterone (DHT) binding to a specific protein in the cytosol of bovine ovarian capsule was studied in vitro. The specific androgen-binding protein in the cytosol was analyzed by chromatographic and ultracentrifugal techniques. From Scatchard analysis, the dissociation constant was 7.4 nM and the number of binding sites was 58.8 fmol/mg protein. Testosterone and 17 alpha-methyltrienolone (R1881) compete for [3H]DHT binding. In the presence of sodium molybdate and at low salt concentrations, the steroid-protein complex sediments as a 9S form, while in the presence of high salt, it sediments at 3.5S. In the absence of molybdate or in the presence of high salt, the 9S form dissociates in a temperature-dependent manner into smaller units. These properties are consistent with the presence of a typical androgen receptor in the bovine ovarian capsule.     

Immunologically reactive multiple species of mitochondrial coupling factor B

Earlier work had indicated that mitochondrial coupling factor B (FB) could be obtained with differing molecular weights, a highly active 13,000 form, a 29,200 form with low activity, and a partially purified 46,000 form with activity higher than the 29,200 form. We have analyzed FB preparations of different purity and after different types of treatment on polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate (SDS-PAGE), followed by silver staining or immunostaining either with rabbit anti-FB serum or monoclonal FB antibody. Highly purified preparations which appear as single bands in SDS-PAGE develop additional higher molecular weight bands (silver staining), including a 48,000 and a 68,000 band, after lyophilization or repeated freezing and thawing or if subjected to SDS-PAGE in the absence of thiol compounds. FB prepared without addition of dithiothreitol and glycerol for stabilization also shows high molecular weight forms, although the active fractions are obtained consistently in the final gel filtration step of purification at a position corresponding to Mr = 13,000. When FB preparations are analyzed by immunoblots of SDS-PAGE using a monoclonal antibody to FB, fresh preparations of purified FB show a single band, while multiple bands are seen in samples which have been frozen and thawed repeatedly. Preparations made in the absence of dithiothreitol and glycerol also show cross-reactive forms of high molecular weight. Similar immunoblots using rabbit antiserum with mitochondria, its extracts, and partially purified FB preparations, all show the presence of several higher molecular weight forms. It is concluded that FB is probably a monomer in mitochondria, and it appears to undergo oligomerization after extraction and during purification.     

Mineralocorticosteroid receptor of the chick intestine. Oligomeric structure and transformation

The binding of [3H]aldosterone in the chick intestine cytosol was analyzed in terms of affinity and specificity. In this tissue, aldosterone binds to the mineralocorticosteroid receptor, with a high affinity (Kd approximately 0.3 nM) and low capacity (approximately 50 fmol/mg protein), and to the glucocorticosteroid receptor. The selective labeling of the mineralocorticosteroid receptor was achieved by incubating the cytosol with [3H]aldosterone in the presence of RU 486. This synthetic steroid completely inhibited the binding of [3H]aldosterone to the glucocorticosteroid receptor and did not bind to the mineralocorticosteroid receptor. The oligomeric structure of the mineralocorticosteroid receptor was studied by using BF4, a monoclonal antibody which reacts with the 90-kDa heat shock protein (hsp 90), a nonhormone-binding component of nontransformed steroid receptors. The mineralocorticosteroid receptor sedimented at 8.5 +/- 0.4 S (n = 8) in a 15-40% glycerol gradient. This peak was shifted to 11.2 +/- 0.6 S (n = 5) after incubation with BF4, indicating that, in the cytosol, hsp 90 was associated with the mineralocorticosteroid receptor. Dissociation of the complex was observed on gradients containing 0.4 M KCl, as judged by the absence of displacement by BF4 of the 4.3 +/- 0.4 S (n = 10) peak. The effect of molybdate and tungstate ions, and of dimethyl pimelimidate, an irreversible cross-linking agent, on the stability of the hsp 90-receptor complex was investigated. Complexes recovered in the presence of 20 mM molybdate ions dissociated on gradients containing 0.4 M KCl (5.2 +/- 0.6 S (n = 4), whereas complexes prepared in the presence of 20 mM tungstate ions sedimented at 8.5 +/- 0.4 S (n = 7). Similarly, complexes prepared in the presence of molybdate ions dissociated during high pressure liquid chromatography (HPLC) gel filtration analysis performed in 0.4 M KCl (RS (Stokes radius) = 3.9 +/- 0.5 nm (n = 3) versus 7.3 +/- 0.2 nm (n = 3) in the presence of 20 mM molybdate ions), whereas complexes prepared in the presence of tungstate ions did not dissociate (RS = 6.9 +/- 0.2 nm (n = 3]. As observed for the tungstate-stabilized receptor, the cross-linked receptor dissociated neither on gradient containing 0.4 M KCl (9.5 +/- 0.1 S (n = 3] nor during HPLC performed in 0.4 M KCl (RS = 6.5 +/- 0.3 (n = 4]. Furthermore, the cross-linked receptor was more resistant to the inactivating effect of urea on aldosterone binding than the noncross-linked receptor prepared in the presence of either molybdate or tungstate ions.     

A common molecular weight of the androgen receptor monomer in different target tissues

Previously reported molecular weights for the monomeric steroid binding subunit of the androgen receptor protein have ranged from 25,000 to 167,000. The molecular weight appeared to vary among different species and target organs, as well as between different investigators. This study has examined androgen receptors from a diverse group of organs and species to determine whether these tissues share a common monomeric form. Gel filtration revealed peaks of specific [3H]dihydrotestosterone binding activity corresponding to Stokes radii of 54, 33, and 20 A in cytosols from several tissues. Phosphocellulose chromatography diminished the appearance of the smaller androgen receptor forms and facilitated the appearance of the larger 54-A form. Mixing experiments suggested that phosphocellulose was stabilizing the 54-A form by binding putative proteases which cleave this larger form. Methods were developed to generate homogenous preparations of a given androgen receptor size for comparative study. Sucrose density gradient analysis showed sedimentation coefficients of 4.5-5.0, 3.5-4.0, and 2.5-3.0 S, respectively. The corresponding calculated molecular weights were 109,000-121,000, 52,000-59,000, and 22,000-27,000. Scatchard analysis of each of these androgen receptor forms demonstrated very similar affinity for [3H]dihydrotestosterone (Kd approximately 1 nM), and each form possessed the ability to bind to DNA-cellulose. Extensively purified preparations of androgen receptor from R3327 tumor contained varying amounts of the three receptor forms even though molybdate and phosphocellulose were used to stabilize the androgen receptor protein during purification.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effects of proteases and protease inhibitors on the 4.5 S and 8 S androgen receptor.

The size of androgen receptors from rat ventral and dorsal prostate, dorsal prostate (Dunning) tumor, testis, epididymis, and seminal vesicle was determined using Sephadex G-200 chromatogrpahy and sucrose gradient centrifugation. The protease inhibitor diisopropyl fluorophosphate (DFP) was used to minimize receptor breakdown. An 8-9 S, 85 to 106 A receptor (Mr = 280,000 to 365,000; f/fo = 1.9 to 2.4) observed in unfractionated cytosol prepared in low ionic strength buffer with or without DFP is in equilibrium with a 4.5-5 S, 58 A form (Mr = 117,000; f/fo = 1.8) observed at salt concentrations greater than 0.1 M KCl. Receptor partially purified using (NH4)2SO4 or phosphocellulose chromatography in the absence of DFP was present as smaller fragments of 3.6 S, 37 A and 3.0 S, 23 A. Similar fragments could be generated from the 4.5 S or 8 S receptor by mild trypsin treatment. In addition, ventral prostate contains a DFP-insensitive enzyme which specifically converts the 4.5 S, 58 A receptor to the 3.6 S 37 A fragment. The DFP-insensitive enzyme is partially inhibited by rabbit bile and appears similar to the enzyme seminin, a secretory protein of human prostate. Androgen receptor isolated in the presence of DFP from nuclei labeled in vivo is predominantly 4.5 S, 58 A, with smaller forms (37 and 23 A) appearing in the absence of DFP. The 4.5 S, 58 A nuclear receptors were also in equilibrium with a large 8 S form. Receptor breakdown by DFP-insensitive and sensitive proteases appears to be an in vitro phenomenon. Furthermore, the size of the androgen receptor is not significantly changed during receptor migration from cytoplasm to nucleus.     

Activation of the dioxin and glucocorticoid receptors to a DNA binding state under cell-free conditions

The activation in vitro of dioxin and glucocorticoid receptors from a non-DNA binding to a DNA binding state was characterized. Ligand-free dioxin and glucocorticoid receptors were partially co-purified from rat liver cytosol, and both receptors sedimented at 9 S following labeling with the respective ligand. The 9 S forms of the dioxin and glucocorticoid receptors have previously been shown to represent heteromeric complexes containing the Mr approximately equal to 90,000 heat shock protein. The 9 S ligand-free or ligand-bound glucocorticoid receptor was converted to the monomeric 4-5 S form upon exposure to 0.4 M NaCl even in the presence of the stabilizing agent molybdate. Under identical conditions, the 9 S ligand-free and ligand-bound dioxin receptor forms remained essentially intact. However, in the absence of molybdate, the dioxin receptor could be converted to a 4-5 S form upon exposure to high concentrations of salt. These results indicate that the glucocorticoid receptor readily dissociates from the 9 S to the 4-5 S form even in the absence of hormone, whereas both the ligand-free and ligand-occupied 9 S dioxin receptor forms represent more stable species. Gel mobility shift experiments revealed that the 4-5 S glucocorticoid receptor interacted with a glucocorticoid response element both in the absence and presence of ligand. On the other hand, occupation of the dioxin receptor by ligand greatly enhanced the ability of the receptor to be activated to a form that binds to its target enhancer element. Once dissociated, the monomeric form of the dioxin receptor was also able to interact with its DNA target sequences even in the absence of ligand. Thus, ligand binding efficiently facilitates subunit dissociation of the dioxin receptor but is not a prerequisite for DNA binding per se. Given the apparent stability of its non-DNA binding 9 S form, the dioxin receptor system might be a useful model for the investigation of the mechanism of activation of soluble receptor proteins.     

Resolution of non-activated and activated androgen receptors based on differences in their hydrodynamic properties

This study shows that cytosolic androgen receptor of rat ventral prostate sediments at 10-11 S on conventional low salt sucrose density gradients (SDG), and at 4.6 S on high salt SDG, whether it is activated or not; inclusion of 10 mM Na2MoO4 in all buffers does not alter these sedimentation coefficients. In the presence of 50 mM Na2MoO4 non-activated and activated androgen receptors sediment in high salt SDG at 7-8 S and 4.6 S, respectively. Thus the presence of high concentrations of molybdate during centrifugation inhibits the KCl induced disaggregation of receptor into subunits. Similar effects are observed on Sephacryl-S200 gel filtration; in 50 mM MoO2-4 and 0.4 M KCl non-activated receptor has an estimated Stokes radius of 67 A; this value decreases to 52 A upon activation in the presence of proteolysis inhibitors; omission of molybdate during chromatography yielded 52 A and 27 A entities. Estimated mol. wts are 198,000 Daltons for the non-activated 67 A form and 98,000 Daltons for the activated 52 A receptor. Sodium molybdate (50 mM) prevents temperature (18 degrees C) and high ionic strength (0.4 M KCl) induced receptor activation. This inhibition was overcome by removing molybdate by centrifugal gel filtration, or by increasing the KCl concentration to 0.8 M. The inhibitory effects of molybdate on salt induced receptor disaggregation into activated subunits are no longer observed at pH greater than 7.4 or after chemical modification of sulfhydryl groups. Once androgen receptor has been disaggregated into its activated subunits the activated state is maintained even upon reassociation to 10-11 S aggregates in low salt. The relative concentrations of KCl and molybdate are critical; thus, 10 mM Na2MoO4/0.4 M KCl and 50 mM Na2MoO4/0.8-1.2 M KCl did not differentiate activated from non-activated androgen receptor based on their hydrodynamic properties. In the presence of 0.4 M KCl and 50 mM molybdate, however, the hydrodynamic properties of androgen receptor can be correlated with receptor activation.     

Purification of the molybdate-stabilized 9-10 S estradiol receptor from calf uterus

The molybdate-stabilized calf uterine estradiol receptor has been purified to near-homogeneity by a three-step procedure. Initial purification by heparin-Sepharose chromatography provides a concentrated receptor extract in 40% yield with a 5-10-fold increase in purity. The inclusion of molybdate in phosphate-buffered cytosol enhances 9-10 S receptor stability in high salt and allows elution of the oligomeric receptor complex from heparin-Sepharose with 0.4 M KCl. A second affinity step utilizing estrone carboxymethyloxime coupled to diaminoethyl bis(2-hydroxypropoxy)butane-Sepharose Cl-4B increases purification by a further 1600-fold. High performance liquid chromatography gives homogeneous receptor which migrates on sodium dodecyl sulfate-polyacrylamide gel electrophoresis as a polypeptide of Mr approximately 89,000. The purified molybdate-stabilized receptor sediments at 9.3 +/- 0.2 S (n = 4) in glycerol gradients and has a Stokes radius of 74 +/- 3 A (n = 2) giving a calculated Mr approximately 290,000. These properties and the steroid-binding specificity of the purified receptor bear a close similarity to those found for the 9-10 S receptor in crude cytosol.     

Effects of calcium on the chick oviduct progesterone receptor

The chick oviduct cytosol progesterone receptor can be transformed to a small form (Rs = 21A, S20,w:2.9) denoted "mero-receptor" by incubation in the presence of Ca2+ [8]. In the molybdate-free cytosol all the progestin binding components could be completely transformed to mero-form by 1 h treatment with 100 mM Ca2+ at 0 degrees C. If EDTA was secondarily added, the ligand was rapidly released. If molybdate (20 mM) containing cytosol was incubated with Ca2+, no radioactivity was found in the meroposition on the Agarose A 0.5 m column, but the bound steroid sedimented at 2.9 S in sucrose gradients containing Ca2+ (and no molybdate). When 20 nM molybdate was added to cytosol containing receptor activated by 0.3 M KCl, complete mero-transformation by Ca2+ was obtained also by the gel filtration criterion, indicating that molybdate does not inhibit the mero-transforming factor. Ligand-free progesterone receptor could also be completely converted to mero-form by endogenous cytosolic transforming factor and calcium. The transforming factor was completely inactivated, when cytosol was run through Agarose A 0.5 m gel. Mero-transformation was found to be irreversible. The purified progesterone receptor subunit 110 K (B) was partially converted to smaller forms by calcium alone (100 mM, 0 degrees C, 1 h) whereas addition of a small amount of cytosol allowed complete conversion to mero-form.     

Purification and characterization of the untransformed androgen receptor in rat prostate

The isolation and characterization of the untransformed form of androgen receptors has not yet been successful, owing to their inherent lability as well as to their ready proteolysis. In this study, we have stabilized rat prostate androgen receptors by sodium molybdate and by rapid filtration on phosphocellulose. Proteases were inhibited by bacitracin, aprotinin, leupeptin and PMSF. Under these conditions the untransformed complex was purified approx 3000-fold, corresponding to 18% yield, by differential chromatography on DEAE cellulose and phosphocellulose gels. The partially purified receptor has the same ionic characteristics as the original untransformed receptor of crude cytosol; in addition, it possesses a Stokes' radius of 75 A, as determined by Sephacryl S-300 gel filtration, a sedimentation coefficient of 8.8S, a calculated molecular weight of 275 kDa and a friction coefficient of 1.6. The [3H]R1881 receptor complex was specific to androgens since unlabelled R1881 and dihydrotestosterone were able to completely displace bound [3H]R1881, whereas estradiol, cortisol, and triamcinolone acetonide did not compete. The purified complex was a multimer dissociable by 0.6 M KCl, resulting in a form migrating in the 4S area on sucrose density gradient. After treatment with 0.5% formaldehyde, three forms were obtained, migrating in the areas of 8-9, 5-6 and 3-4S respectively, of a sucrose density gradient containing 0.6 M KCl. This is the first step towards the purification to homogeneity of the untransformed androgen receptor.