Membrane formation and drug loading effects in high amylose starch tablets studied by NMR imaging

Cross-linked high amylose starch is used as an excipient in the preparation of pharmaceutical tablets for the sustained release of drugs. NMR imaging with contrast enhanced by proton density and by self-diffusion coefficient was used to follow the water uptake and swelling, two critical parameters controlling the drug release of the cross-linked starch tablets containing 10 wt % of ciprofloxacin and of acetaminophen, respectively. The drug-loaded tablets were studied in a H2O/D2O mixture at 37 degrees C in comparison to the tablets without any drug loading. The diffusion of water in the tablets all showed a Fickian behavior, but the kinetics of water uptake was faster in the case of the drug-loaded tablets. The formation of a membrane at the water/tablet interface was observed.     

Glutaraldehyde and glyoxal cross-linked chitosan microspheres for controlled delivery of centchroman

Glutaraldehyde and glyoxal cross-linked microspheres were prepared using chitosan with different molecular weights (MWs) and degrees of deacetylation (DDAs) for sustained release of centchroman under physiological conditions. The DDA in chitosan was determined by different methods, and the samples were categorized as chitosan with low (48%), medium (62%), and high (75%) DDA. The size and shape of the microspheres were determined by scanning electron microscopy (SEM), and hydrophobicity was determined by adsorption of Rose Bengal dye on microspheres cross-linked with glutaraldehyde or glyoxal. The effect of MW, DDA, and degree of cross-linking in microspheres was studied on the degree of swelling, as well as by the loading and release of centchroman. The glyoxal cross-linked microspheres were more compact and hydrophobic and showed better sustained release in companion to chitosan microspheres and glutaraldehyde cross-linked microspheres. The linear fractional release of centchroman with the square root of time indicated a Fickian behavior of centchroman, and the microspheres also showed zero-order release kinetics for centchroman.     

Swelling behavior and controlled release of theophylline and sulfamethoxazole drugs in beta-lactoglobulin protein gels obtained by phase separation in water/ethanol mixture

Physically cross-linked beta-lactoglobulin (BLG) protein gels containing theophylline and sulfamethoxazole low molecular weight drugs were prepared in 50% ethanol solution at pH 8 and two protein concentrations (6 and 7% (w/v)). Swelling behavior of cylindrical gels showed that, irrespective of the hydrated or dehydrated state of the gel, the rate of swelling was the highest in water. When the gels were exposed to water, they first showed a swelling phase in which their weight increased 3 and 30 times for hydrated and dehydrated gels, respectively, due to absorption of water, followed by a dissolution phase. The absorption of solvent was however considerably reduced when the gels were exposed to aqueous buffer solutions. The release behavior of both theophylline and sulfamethoxazole drugs from BLG gels was achieved in a time window ranging from 6 to 24 h. The drug release depended mainly on the solubility of the drugs and the physical state of the gel (hydrated or dry form). Analysis of drug release profiles using the model of Peppas showed that diffusion through hydrated gels was governed by a Fickian process whereas diffusion through dehydrated gels was governed partly by the swelling capacities of the gel but also by the structural rearrangements inside the network occurring during dehydration step. By a judicious selection of protein concentration, hydrated or dehydrated gel state, drug release may be modulated to be engineered suitable for pharmaceutical as well as cosmetics and food applications.     

Imaging of high-amylose starch tablets. 3. Initial diffusion and temperature effects

The penetration of water into cross-linked high amylose starch tablets was studied at different temperatures by nuclear magnetic resonance (NMR) imaging, which follows the changes occurring at the surface and inside the starch tablets during swelling. It was found that the swelling was anisotropic, whereas water diffusion was almost isotropic. The water proton image profiles at the initial stage of water penetration were used to calculate the initial diffusion coefficient. The swelling and water concentration gradients in this controlled release system show significant temperature dependence. Diffusion behavior changed from Fickian to Case II diffusion with increasing temperature. The observed phenomena are attributed to the gelatinization of starch and the pseudo-cross-linking effect of double helix formation.     

Oxycellulose Beads with Drug Exhibiting pH-Dependent Solubility

The aim of this study was to develop novel hydrogel-based beads and characterize their potential to deliver and release a drug exhibiting pH-dependent solubility into distal parts of gastrointestinal (GI) tract. Oxycellulose beads containing diclofenac sodium as a model drug were prepared by the ionotropic external gelation technique using calcium chloride solution as the cross-linking medium. Resulting beads were characterized in terms of particle shape and size, encapsulation efficacy, swelling ability and in vitro drug release. Also, potential drug–polymer interactions were evaluated using Fourier transform infrared spectroscopy. The particle size was found to be 0.92–0.96 mm for inactive (oxycellulose only) and 1.47–1.60 mm for active (oxycellulose–diclofenac sodium) beads, respectively. In all cases, the sphericity factor was between 0.70 and 0.81 with higher values observed for samples containing higher polymer and drug concentrations. The swelling of inactive beads was found to be strongly influenced by the pH and composition (i.e. Na⁺ concentration) of the selected media (simulated gastric fluid vs. phosphate buffer pH 6.8). The encapsulation efficiency of the prepared particles ranged from 58% to 65%. Results of dissolution tests showed that the drug loading inside of the particles influenced the rate of its release. In general, prepared particles were able to release the drug within 12–16 h after a lag time of 4 h. Fickian diffusion was found as the predominant drug release mechanism. Thus, this novel particulate system showed a good potential to deliver drugs specifically to the distal parts of the human GI tract.     

Preparation and characterization of sodium hexameta phosphate cross-linked chitosan microspheres for controlled and sustained delivery of centchroman

The cross-linked microspheres using chitosan with different molecular weights and degree of deacetylation have been prepared in presence of sodium hexameta polyphosphate (SHMP) as physical cross-linker. The degree of cross-linking through electrostatic interactions in chitosan microspheres has been evaluated by varying the charge density on chitosan and varying degree of dissociation of sodium hexameta polyphosphate by solution pH. The degree of deacetylation and molecular weight of chitosan has controlled electrostatic interactions between hexameta polyphosphate anions and chitosan, which played significant role in swelling, loading and release characteristics of chitosan microspheres for centchroman. The microspheres prepared by hexameta polyphosphate anions cross-linker were compact and more hydrophobic than covalently cross-linked microspheres, which has been attributed to the participation of all amino groups of chitosan in physical cross-linking with added hexameta polyphosphate anions. The microspheres prepared under different experimental conditions have shown an initial step of burst release, which was followed by a step of controlled release for centchroman. The extent of drug release in these steps has shown dependence on properties of chitosan and degree of cross-linking between chitosan and added polyanions. The degree of swelling and release characteristics of microspheres was also studied in presence of organic and inorganic salts, which shown significant effect on controlled characteristics of microspheres due to variations in ionic strength of the medium. The initial step of drug release has followed first order kinetics and become zero order after attaining an equilibrium degree of swelling in these microspheres. The microspheres prepared using chitosan with 62% (w/w) degree of deacetylation and molecular weight of 1134 kg mol⁻¹ have shown a sustained release for centchroman for 50 h at 4% (w/w) degree of cross-linking with SHMP.     

Formulation Study and Evaluation of Matrix and Three-layer Tablet Sustained Drug Delivery Systems Based on Carbopols with Isosorbite Mononitrate

The purpose of this research was to develop and evaluate different preparations of sustained delivery systems, using Carbopols as carriers, in the form of matrices and three-layer tablets with isosorbite mononitrate. Matrix tablets were prepared by direct compression whereas three-layer tablets were prepared by compressing polymer barrier layers on both sides of the core containing the drug. The findings of the study indicated that all systems demonstrated sustained release. The properties of the polymer used and the structure of each formulation appear to considerably affect drug release and its release rate. The three-layer formulations exhibit lower drug release compared to the matrices. This was due to the fact that the barrier-layers hindered the penetration of liquid into the core and modified drug dissolution and release. The geometrical characteristics/structure of the tablets as well as the weight/thickness of the barriers-layers considerably influence the rate of drug release and the release mechanisms. Kinetic analysis of the data indicated that drug release from matrices was mainly attributed to Fickian diffusion while three-layer tablets exhibited either anomalous diffusion or erosion/relaxation mechanisms. The advantage of Carbopol formulations is that a range of release profiles can easily be obtained through variations in tablet structure and thus Carbopols are appropriate carriers of oral sustained drug delivery systems for soluble drugs such as the isosorbite mononitrate.     

Terminalia Gum as a Directly Compressible Excipient for Controlled Drug Delivery

The exudates from the incised trunk of Terminalia randii has been evaluated as controlled release excipient in comparison with xanthan gum and hydroxypropylmethylcellulose (HPMC) using carvedilol (water insoluble) and theophylline (water soluble) as model drugs. Matrix tablets were prepared by direct compression and the effects of polymer concentration and excipients—spray dried lactose, microcrystalline cellulose and dicalcium phosphate dihydrate on the mechanical (crushing strength (CS) friability (F) and crushing strength–friability ratio (CSFR)) and drug release properties of the matrix tablets were evaluated. The drug release data were fitted into different release kinetics equations to determine the drug release mechanism(s) from the matrix tablets. The results showed that the CS and CSFR increased with increase in polymer concentration while F decreased. The ranking of CS and CSFR was HPMC > terminalia > xanthan while the ranking was reverse for F. The ranking for t ₂₅ (i.e. time for 25% drug release) at a polymer concentration of 60% was xanthan > terminalia = HPMC. The dissolution time, t ₂₅, of theophylline matrices was significantly lower (p < 0.001) than those of carvedilol matrix tablets. Drug release from the matrices was by swelling, diffusion and erosion. The mechanical and drug release properties of the tablets were significantly (p < 0.05) dependent on the type and concentration of polymer and excipients used with the release mechanisms varying from Fickian to anomalous. Terminalia gum compared favourably with standard polymers when used in controlled release matrices and could serve as a suitable alternative to the standard polymers in drug delivery.     

Electric Field-Controlled Benzoic Acid and Sulphanilamide Delivery from Poly(Vinyl Alcohol) Hydrogel

The controlled release of benzoic acid (3.31 Å) and sulphanilamide (3.47 Å) from poly(vinyl alcohol), PVA, hydrogels fabricated by solution casting at various cross-linking ratios, were investigated. The PVA hydrogels were characterized in terms of the degree of swelling, the molecular weight between cross-links, and the mesh size. The drug release experiment was carried out using a modified Franz diffusion cell, at a pH value of 5.5 and at temperature of 37°C. The amount of drug release and the diffusion coefficients of the drugs from the PVA hydrogels increased with decreasing cross-linking ratio, as a larger mesh size was obtained with lower cross-linking ratios. With the application of an electric field, the amount of drug release and the diffusion coefficient increased monotonically with increasing electric field strength, since the resultant electrostatic force drove the ionic drugs from the PVA matrix. The drug size, matrix pore size, electrode polarity, and applied electric field were shown to be influential controlling factors for the drug release rate.KEY WORDS: electrophoresis force, ionic drug delivery, iontophoresis, poly(vinyl alcohol)     

Effects of structure and modification on sustained release properties of starches

Starches of different sources and compositions were investigated to determine the effect of structure and chemical modification on the sustained release properties of the resultant modified starches. Starches were cross-linked with epichlorohydrin and substituted with carboxymethyl or aminoethyl groups at different levels. Substitution efficiency was overall higher for waxy corn and potato starches than for Hylon VII, and was higher for starches at low cross-linking levels than those at high cross-linking ones. Waxy corn starch displayed better sustained release properties when cross-linked to a lower level, whereas Hylon VII showed better performances when cross-linked to a higher level. Matrices substituted with carboxymethyl and aminoethyl groups at the high level showed better sustained release properties than those substituted at the low level. The proportion and structure of amylose and amylopectin in starches from different botanical sources strongly influenced the level of modification required to produce a satisfactory sustained release matrix.     

A study of water diffusion into a high-amylose starch blend: the effect of moisture content and temperature

The effect of moisture content and temperature on water diffusion into a modified high amylose (< or = 90%) maize thermoplastic starch blend was investigated. Gravimetric and magnetic resonance imaging (MRI) studies were conducted to elucidate the diffusion mechanism and diffusion coefficients for this system. The diffusion coefficient data demonstrated that the rate of water diffusion into this blend was significantly dependent upon temperature and moisture content. Water diffusion was faster at higher temperatures and generally for samples stored at higher relative humidity environments. It was revealed from the gravimetric data that water diffusion into this starch blend was Fickian; however, further analysis of the MRI images found that the water diffusion mechanism was exponentially dependent on the concentration. This result was determined by comparing experimental water concentration profiles to a theoretical model calculated using the implicit Crank-Nicolson finite difference method.     

Cross-linked amylose as matrix for drug controlled release. X-ray and FT-IR structural analysis

For cross-linked amylose (CLA) tablets prepared by direct compression, a linear increase in cross-linking degree (cld) defined as percentage of epichlorohydrin cross-linker/polymer, generates non-monotonous variation of drug release time. Controlled release (up to 20–24 h) properties were obtained only for tablets from CLA (Contramid^TM) with relatively low cld (CLA-2 up to CLA-6). Moderate increase in cld (CLA-15) generates a sharp decrease in the release time (2–6 h). This is a particular characteristic of the CLA matrix. The controlled release properties were related to the X-ray pattern of the dry CLA network. The increase in cld induces a transition from B-type (double helix) to a predominat V-type (single helix) and to more amorphous conformation of CLA powders. Furthermore, FT-IR data indicated low free water content at low cld. For low cross-linked CLA, chains are closely located and stabilized by HO groups involved in hydrogen bonding and thus more resistant to hydration and more appropriate for the control of drug release.     

β-Cyclodextrin hydrogels as potential drug delivery systems

β-cyclodextrins (βCD) are cyclic oligosaccharides which have been widely employed for pharmaceutical applications. Discs of insoluble polymers were synthesized by crosslinking β-cyclodextrins with the reagent epichlorohydrin. In this work, the possibility of employing a polymer containing 60 ± 3% βCD for drug delivery of two antiinflammatory (naproxen and nabumetone) and two antifungal drugs (naftifine and terbinafine) has been investigated. The interaction of Naproxen with the polymers was evidenced by X-ray diffractometry, FTIR spectroscopy and differential thermal analysis. Drug release kinetics were carried out at physiological conditions of pH and temperature, and kinetic and diffusion constants were calculated by fitting 60% of the release profile according to the Korsmeyer-Peppas equation. Also, diffusion coefficients were calculated according to the simplified Higuchi model. The drug release followed a simple Fickian diffusion mechanism for all the model drugs. This study suggests that these hydrogel matrices are potentially suitable as sustained release systems.     

Preparation and evaluation of chitosan/carrageenan beads for controlled release of sodium diclofenac

The polyelectrolyte complex (PEC) hydrogel beads based on chitosan (CS) and carrageenan (CR) have been studied as a controlled release device to deliver sodium diclofenac (DFNa) in the simulated gastrointestinal condition. Various factors potentially influencing the drug release (ie, CS/CR proportion, DFNa content, types and amount of cross-linking agents) were also investigated. The optimal formulation was obtained with CS/CR proportion of 2/1 and 5% (wt/vol) DFNa. The controlled release of the drug from this formulation was superior to other formulations and was able to maintain the release for approximately 8 hours. Upon cross-linking with glutaric acid and glutaraldehyde, the resulting beads were found to be more efficient for prolonged drug release than their non-cross-linking counterparts. The bead cross-linked with glutaraldehyde was able to control the release of the drug over 24 hours. The difference in the drug release behavior can be attributed to the differences in ionic interaction between the oppositely charged ions and to the concentrations of the drug within the beads, which depends on the compositions of the formulation and the pH of the dissolution medium. The release of drug was controlled by the mechanism of the dissolution of DFNa in the dissolution medium and the diffusion of DFNa through the hydrogel beads.     

Self-gelling primaquine-gum arabic conjugate: an injectable controlled delivery system for primaquine

Primaquine, an 8-aminoquinoline, forms a cross-linked gel with periodate-oxidized gum arabic rapidly by simply mixing the drug with the oxidized polysaccharide due to Schiff's base formation between the two amino groups of primaquine and the aldehyde groups in the oxidized polysaccharide. The speed of gelation is determined by the degree of oxidation of polysaccharide, its quantity, and the drug payload. Estimation of the cross-linking density of the gels showed that the higher is the degree of oxidation of gum arabic, the higher is the cross-linking density. In vitro release of primaquine into phosphate buffered saline (PBS) at 37 degrees C demonstrated that the extent of release depended on the cross-linking density and drug payload. Repeated extraction using PBS soon after gel formation showed that not all of the primaquine was conjugated to the polysaccharide and the release seen in vitro was mostly from the unconjugated drug especially from matrices with higher cross-linking density. The gels were found to degrade in PBS, the kinetics of degradation being dependent on the cross-linking density. Cytotoxicity evaluation using MTT assay against L929 mouse fibroblasts showed that oxidized gum arabic having a degree of oxidation of 50% was only very mildly cytotoxic at a concentration of 0.025 g/mL. An injectable, biodegradable drug depot with controlled release of primaquine over several days or weeks would be advantageous for long-term delivery of this drug against malaria or leishmaniasis, and the present study shows that a primaquine-polymer conjugate that can be formed in situ could be an interesting possibility.     

Synthesis, characterization and swelling studies of pH responsive psyllium and methacrylamide based hydrogels for the use in colon specific drug delivery

In order to utilize the psyllium husk a medicinally important natural polysaccharide and to develop the novel hydrogels meant for the colon specific drug delivery, we have prepared psyllium and methacrylamide based polymeric networks by using N,N′-methylenebisacrylamide (NN-MBAAm) as crosslinker and ammonium persulfate (APS) as initiator. To study various structural aspects of the polymeric networks thus formed psy-cl-poly(MAAm), these were characterized with SEMs, FTIR, TGA and swelling studies. The swelling studies of networks were carried out as a function of time, temperature, pH and [NaCl]. Equilibrium swelling has been observed to depend on both composition of the polymer and nature of swelling medium. Maximum percent swelling 1262 was observed for the polymeric network prepared with 19.45 × 10⁻³ mol/L of [NN-MBAAm] at 40 °C in 0.5 M NaOH solution. This article also discusses the release dynamics of tetracycline hydrochloride from the hydrogels, for the evaluation of the drug release mechanism and diffusion coefficients of drug from the polymer matrix. The effect of pH on the release pattern of tetracycline hydrochloride has been studied by varying the pH of the release medium. It has been observed from the release dynamics of drug from the hydrogels that the diffusion exponent ‘n’ have 0.477, 0.423 and 0.427 values and gel characteristic constant ‘k’ have 5.07 × 10⁻², 6.34 × 10⁻² and 6.38 × 10⁻² values, respectively, in distilled water, pH 2.2 buffer and pH 7.4 buffer solution. The values the ‘n’ indicated that the Fickian type diffusion mechanism occurred for the release of tetracycline hydrochloride from drug loaded psy-cl-poly(MAAm) polymers in different release mediums. In Fickian type diffusion mechanism, the rate of polymer chain relaxation is more as compare to the rate of drug diffusion from these hydrogels and release behavior follows Fick’s law of diffusion. In each release medium, the values of the initial diffusion coefficient ‘D_i’ for the release of tetracycline hydrochloride was higher than the values of late time diffusion coefficient ‘D_L’ indicating that in the start, the diffusion of drug from the polymeric matrix was faster as compare to the latter stages.     

Investigation into the diffusion of water into HEMA-co-MOEP hydrogels

Cross-linked homopolymers and copolymers of 2-hydroxyethyl methacrylate, HEMA, and ethylene glycol methacrylate phosphate, MOEP, have been synthesized, and the diffusion of water into these systems has been investigated. Only polymers with 0-20 mol % MOEP exhibited ideal swelling behavior as extensive fracturing occurred in the systems with greater than 20 mol % MOEP as the polymers began to swell during water sorption. Gravimetric studies were used in conjunction with magnetic resonance imaging of the diffusion front to elucidate the diffusion mechanism for these systems. In the case of the cross-linked HEMA homopolymer gels, the water transport mechanism was determined to be concentration-independent Fickian diffusion. However, as the fraction of MOEP in the network increased, the transport mechanism became increasingly exponentially concentration-dependent but remained Fickian until the polymer consisted of 30 mol % MOEP where the water transport could no longer been described by Fickian diffusion.     

Composite nanoparticles based on hyaluronic acid chemically cross-linked with alpha,beta-polyaspartylhydrazide

In this paper, new composite nanoparticles based on hyaluronic acid (HA) chemically cross-linked with alpha,beta-polyaspartylhydrazide (PAHy) were prepared by the use of a reversed-phase microemulsion technique. HA-PAHy nanoparticles were characterized by FT-IR spectroscopy, confirming the occurrence of the chemical cross-linking, dimensional analysis, and transmission electron micrography, showing a sub-micrometer size and spherical shape. Zeta potential measurements demonstrated the presence of HA on the nanoparticle surface. A remarkable affinity of the obtained nanoparticles toward aqueous media that simulate some biological fluids was found. Stability studies showed the absence of chemical degradation in various media, while in the presence of hyaluronidase, a partial degradation occurred. Cell compatibility was evaluated by performing in vitro assays on human chronic myelogenous leukaemia cells (K-562) chosen as a model cell line and a haemolytic test. HA-PAHy nanoparticles were also able to entrap 5-fluorouracil, chosen as a model drug, and release it in a simulated physiological fluid and in human plasma with a mechanism essentially controlled by a Fickian diffusion.     

Mucoadhesive properties of cross-linked high amylose starch derivatives

Acetate (Ac-), aminoethyl (AE-) and carboxymethyl (CM-)derivatives of cross-linked high amylose starch (HASCL-6) were previously shown to control, over more than 20h, the release of drugs from highly loaded (up to 60% drug) monolithic tablets. It was now of interest to evaluate their mucoadhesive characteristics in view of further utilization in buccal or vaginal transmucosal delivery. The present study shows that ionic AE-HASCL-6 and CM-HASCL-6 derivatives exhibit higher mucoadhesive properties than neutral HASCL-6 and Ac-HASCL-6, suggesting that the ionic groups introduced on cross-linked starch chains play a role in the bioadhesion process. The adhesiveness seemed related to capillary attraction forces. Surface adhesion parameters were calculated for slabs based on the mentioned polymers and corroborated with their swelling behavior at various pH changes. The positively charged AE-derivatives presented a higher adhesion at acidic pH, being thus recommended for vaginal delivery, whereas the negatively charged derivatives (CM-HASCL-6) exhibited a better adhesion at neutral pH, being thus more appropriate for buccal delivery.     

Transport of small anionic and neutral solutes through chitosan membranes: dependence on cross-linking and chelation of divalent cations

Chitosan membranes were prepared by solvent casting and cross-linked with glutaraldehyde at several ratios under homogeneous conditions. The cross-linking degree, varying from 0 to 20%, is defined as the ratio between the total aldehyde groups and the amine groups of chitosan. Permeability experiments were conducted using a side-by-side diffusion cell to determine the flux of small molecules of similar size but with different chemical moieties, either ionized (benzoic acid, salicylic acid, and phthalic acid) or neutral (2-phenylethanol) at physiological pH. The permeability of the different model molecules revealed to be dependent on the affinity of those structurally similar molecules to chitosan. The permeability of the salicylate anion was significantly enhanced by the presence of metal cations commonly present in biological fluids, such as calcium and magnesium, but remained unchanged for the neutral 2-phenylethanol. This effect could be explained by the chelation of metal cations on the amine groups of chitosan, which increased the partition coefficient. The cross-linking degree was also correlated with the permeability and partition coefficient. The change in the permeation properties of chitosan to anionic solutes in the presence of these metallic cations is an important result and should be taken into consideration when trying to make in vitro predictions of the drug release from chitosan-based controlled release systems.