Mechanisms and control of silk-based electrospinning

Silk fibroin (SF) nanofibers, formed through electrospinning, have attractive utility in regenerative medicine due to the biocompatibility, mechanical properties, and tailorable degradability. The mechanism of SF electrospun nanofiber formation was studied to gain new insight into the formation and control of nanofibers. SF electrospinning solutions with different nanostructures (nanospheres or nanofilaments) were prepared by controlling the drying process during the preparation of regenerated SF films. Compared to SF nanospheres in solution, SF nanofilaments had better spinnability with lower viscosity when the concentration of silk protein was below 10%, indicating a critical role for SF morphology, and in particular, nanostructures, for the formation of electrospun fibers. More interesting, the diameter of electrospun fibers gradually increased from 50 to 300 nm as the concentration of SF nanofilaments in the solution increased from 6 to 12%, implying size control by simply adjusting SF nanostructure and concentration. Aside from process parameters investigated in previous studies, such as SF concentration, viscosity, and electrical potential, the present mechanism emphasizes significant influence of SF nanostructure on spinnability and diameter control of SF electrospun fibers, providing a controllable option for the preparation of silk-based electrospun scaffolds for biomaterials, drug delivery, and tissue engineering needs.     

Facile preparation of well-defined near-monodisperse chitosan/sodium alginate polyelectrolyte complex nanoparticles (CS/SAL NPs) via ionotropic gelification: A suitable technique for drug delivery systems

Polymeric nanoparticles have emerged as a promising approach for drug delivery systems. We prepared chitosan (CS)/sodium alginate (SAL) polyelectrolyte complex nanoparticles (CS/SAL NPs) via a simple and mild ionic gelation method by adding a CS solution to a SAL solution, and investigated the effects of molecular weight of the added CS, and the SAL:CS mass ratio on the formation of the polyelectrolyte complex nanoparticles. The well-defined CS/SAL NPs with near-monodisperse particle size of about 160 nm exhibited a pH stable structure, and pH responsive properties with a negatively or positively charged surface. The so-called “electrostatic sponge” structure of the polyelectrolyte complex nanoparticles enhanced their drug-loading capacity towards the differently charged model drug molecules, and favored controlled release. We also found that the drug-loading capacity was influenced by the nature of the drugs and the drug-loading media, while drug release was affected by the solubility of the drugs in the drug-releasing media. The biocompatibility and biodegradability of the polyelectrolytes in the polyelectrolyte complex nanoparticles were maintained by ionic interactions. These results indicate that CS/SAL NPs can represent a useful technique for pH-responsive drug delivery systems.     

Silk fibroin/hydroxyapatite composites for bone tissue engineering

Silk fibroin (SF) is a natural fibrous polymer with strong potential for many biomedical applications. SF has attracted interest in the field of bone tissue engineering due to its extraordinary characteristics in terms of elasticity, flexibility, biocompatibility and biodegradability. However, low osteogenic capacity has limited applications for SF in the orthopedic arena unless suitably functionalized. Hydroxyapatite (HAp) is a well-established bioceramic with biocompatibility and appropriate for constructing orthopedic and dental substitutes. However, HAp ceramics tend to be brittle which can restrict applications in the repair of load-bearing tissues such as bones. Therefore, blending SF and HAp combines the useful properties of both materials as bone constructs for tissue engineering, the subject of this review.     

An Investigation on the Effect of Polyethylene Oxide Concentration and Particle Size in Modulating Theophylline Release from Tablet Matrices

Polyethylene oxide has been researched extensively as an alternative polymer to hydroxypropyl methylcellulose (HPMC) in controlled drug delivery due to its desirable swelling properties and its availability in a number of different viscosity grades. Previous studies on HPMC have pointed out the importance of particle size on drug release, but as of yet, no studies have investigated the effect of particle size of polyethylene oxide (polyox) on drug release. The present study explored the relationship between polymer level and particle size to sustain the drug release. Tablets produced contained theophylline as their active ingredient and consisted of different polyethylene oxide particle size fractions (20–45, 45–90, 90–180 and 180–425 μm). It was shown that matrices containing smaller particle sizes of polyox produced harder tablets than when larger polyox particles were used. The release studies showed that matrices consisting of large polyox particles showed a faster release rate than matrices made from smaller particles. Molecular weight (MW) of the polymer was a key determining step in attaining sustained release, with the high MW of polyox resulting in a delayed release profile. The results showed that the effect of particle size on drug release was more detrimental when a low concentration of polyox was used. This indicates that care must be taken when low levels of polyox with different particle size fractions are used. More robust formulations could be obtained when the concentration of polyox is high. Differential scanning calorimetry (DSC) traces showed that particle size had no major effect on the thermal behaviour of polyox particles.KEY WORDS: DSC traces, particle size, polyox, sustained release, theophylline     

Multi‐armed poly(L‐glutamic acid)‐graft‐oligoethylenimine copolymers as efficient nonviral gene delivery vectors

Background

The application of polyethylenimine (PEI) in gene delivery has been severely limited by significant cytotoxicity that results from a nondegradable methylene backbone and high cationic charge density. It is therefore necessary to develop novel biodegradable PEI derivates for low‐toxic, highly efficient gene delivery.

Methods

A series of novel cationic copolymers with various charge density were designed and synthesized by grafting different kinds of oligoethylenimine (OEI) onto a determinate multi‐armed poly(L ‐glutamic acid) backbone. The molecular structures of multi‐armed poly(L ‐glutamic acid)‐graft‐OEI (MP‐g‐OEI) copolymers were characterized using nuclear magnetic resonance, viscosimetry and gel permeation chromatography. Moreover, the MP‐g‐OEI/DNA complexes were measured by a gel retardation assay, dynamic light scattering and atomic force microscopy to determine DNA binding ability, particle size, zeta potential, complex formation and shape, respectively. MP‐g‐OEI copolymers were also evaluated in Chinese hamster ovary and human embryonic kidney‐293 cells for their cytotoxicity and transfection efficiency.

Results

The particle sizes of MP‐g‐OEI/DNA complexes were in a range of 109.6–182.6 nm and the zeta potentials were in a range of 29.2–44.5 mV above the N/P ratio of 5. All the MP‐g‐OEI copolymers exhibited lower cytotoxicity and higher gene transfection efficiency than PEI25k in the absence and presence of serum with different cell lines. Importantly, the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay revealed that the cytotoxicity of MP‐g‐OEI copolymers varied with their molecular weight and charge density, and two of MP‐g‐OEI copolymers (OEI600‐MP and OEI1800‐MP) could achieve optimal transfection efficiency at a similar low N/P ratio as that for PEI25k.

Conclusions

MP‐g‐OEI copolymers demonstrated considerable potential as nonviral vectors for gene therapy. Copyright © 2009 John Wiley & Sons, Ltd.     

Development and optimization of solid lipid nanoparticles of amikacin by central composite design

Solid lipid nanoparticles (SLNs) have been studied as a drug-delivery system for the controlling of drug release. These colloidal systems have many important advantages, such as biocompatibility, good tolerability, and ease of scale-up. In the preparation of SLNs, many factors are involved in the characteristics of the particles, such as particle size, drug loading, and zeta potential. In this study, fractional factorial design was applied to examine which variables affect the physicochemical properties of amikacin SLNs. Study was continued by a statistical central composite design (CCD) to minimize particle size and maximize drug-loading efficiency of particles. The results showed that three quantitative factors, including the amount of lipid phase, ratio of drug to lipid, and volume of aqueous phase, were the most important variables on studied responses. The best predicted model for particle size was the quadratic model, and for drug-loading efficiency, was the linear model without any significant lack of fit. Optimum condition was achieved when the ratio of drug to lipid was set at 0.5, the amount of lipid phase at 314?mg, and the volume of aqueous phase at 229?mL. The optimized particle size was 149?±?4?nm and the drug-loading efficiency 88?±?5%. Polydispersity index was less than 0.3. The prepared particles had spherical shape, and the drug release from nanoparticles continued for 144 hours (6 days) without significant burst effect.     

Preparation of semi-interpenetrating polymer networks composed of silk fibroin and poloxamer macromer

A system was designed to utilize silk fibroin (SF) as a matrix for wound dressing. For this system, we prepared a sponge type of porous semi-interpenetrating networks (SIPNs) hydrogel composed of SF and poloxamer 407 macromer to enhance the mechanical and functional properties of SF. The thermal and mechanical properties of the hydrogels as well as their swelling behaviors were studied by means of differential scanning calorimetry, compressive modulus measurement, and gravimetric method, respectively. The morphology and crystalline structure of these SIPN hydrogels were also investigated by scanning electron microscopy (SEM) and wide-angle diffractometry, respectively. Conformational change of SF from random coil to beta-sheet structure was accelerated by formation of SIPNs with poloxamer. The melting temperature of poloxamer in the SIPNs decreased due to the prevention of crystallization by the incorporation of SF. The mechanical strength of SIPNs hydrogel was much higher than those of SF itself or SF/poloxamer blend and increased with the poloxamer content. The equilibrium water content of SF was remarkably increased by formation of SIPNs with poloxamer due to the hydrophilicity of poloxamer. The crystallinity and morphology of SIPNs hydrogel were affected by SIPNs hydrogel composition.     

Thiol‐ene photoclick reaction: An eco‐friendly and facile approach for preparation of MPEG‐g‐keratin biomaterial

Wool keratin is a natural material with excellent properties, which is considered as scaffold biomaterial for tissue engineering. Polyethylene glycol can improve the mechanical properties of keratin materials because of its excellent biocompatibility and plasticity. In the present work, poly (ethylene glycol) methyl ether methacrylate (MPEGMA) was grafted onto keratin by thiol‐ene photoclick reaction. The results of FTIR and SDS‐PAGE verified the successful reaction between MPEGMA and keratin. Compared with the keratin, circular dichroism and XRD results showed that the β‐sheet ratio increased in MPEG‐g‐keratin. Additionally, it can be found that the exposure of keratin hydrophobic amino acids increased quickly and the micelle size became larger due to the introduction of MPEG from the results of fluorescence spectroscopy and particle size analysis. The MPEG‐g‐ keratin was formed into a membrane to further study the application of the modified keratin. Compared with the keratin membrane, the flexibility and biocompatibility of modified keratin have been improved. This work provides an eco‐friendly and facile approach for preparation of the keratin biomaterials.     

Development of a hybrid dextrin hydrogel encapsulating dextrin nanogel as protein delivery system

Dextrin, a glucose polymer with low molecular weight, was used to develop a fully resorbable hydrogel, without using chemical initiators. Dextrin was first oxidized (oDex) with sodium periodate and then cross-linked with adipic acid dihidrazide, a nontoxic cross-linking molecule. Furthermore, a new bidimensional composite hydrogel, made of oxidized dextrin incorporating dextrin nanogels (oDex-nanogel), was also developed. The oDex hydrogels showed good mechanical properties and biocompatibility, allowing the proliferation of mouse embryo fibroblasts 3T3 cultured on top of the gel. The gelation time may be controlled selecting the concentrations of the polymer and reticulating agent. Both the oDex and oDex-nanogel hydrogels are biodegradable and present a 3-D network with a continuous porous structure. The obtained hybrid hydrogel enables the release of the dextrin nanogel over an extended period of time, paralleling the mass loss curve due to the degradation of the material. The dextrin nanogel allowed the efficient incorporation of interleukin-10 and insulin in the oDex hydrogel, providing a sophisticated system of controlled release. The new hydrogels present promising properties as an injectable carrier of bioactive molecules. Both proteins and poorly water-soluble low-molecular-weight drugs are efficiently encapsulated in the nanogel, which performs as a controlled release system entrapped in the hydrogel matrix.     

Hyperbranched double hydrophilic block copolymer micelles of poly(ethylene oxide) and polyglycerol for pH-responsive drug delivery

We report the synthesis of a well-defined hyperbranched double hydrophilic block copolymer of poly(ethylene oxide)-hyperbranched-polyglycerol (PEO-hb-PG) to develop an efficient drug delivery system. In specific, we demonstrate the hyperbranched PEO-hb-PG can form a self-assembled micellar structure on conjugation with the hydrophobic anticancer agent doxorubicin, which is linked to the polymer by pH-sensitive hydrazone bonds, resulting in a pH-responsive controlled release of doxorubicin. Dynamic light scattering, atomic force microscopy, and transmission electron microscopy demonstrated successful formation of the spherical core-shell type micelles with an average size of about 200 nm. Moreover, the pH-responsive release of doxorubicin and in vitro cytotoxicity studies revealed the controlled stimuli-responsive drug delivery system desirable for enhanced efficiency. Benefiting from many desirable features of hyperbranched double hydrophilic block copolymers such as enhanced biocompatibility, increased water solubility, and drug loading efficiency as well as improved clearance of the polymer after drug release, we believe that double hydrophilic block copolymer will provide a versatile platform to develop excellent drug delivery systems for effective treatment of cancer.     

Albumin-Conjugated Lipid-Based Multilayered Nanoemulsion Improves Drug Specificity and Anti-Inflammatory Potential at the Spinal Cord Injury gSite after Intravenous Administration

Albumin-conjugated multilayered nanoemulsion (albumin-MNE) of methyl prednisolone (MP) was developed to ensure the specificity of the drug at the spinal cord injury (SCI) site. MNE was prepared by emulsification followed by ionic deposition of oppositely charged polymer followed by albumin conjugation using N-hydroxysuccinimide. Prepared nanoemulsion was characterized for particle size, polydispersity index (PDI), zeta potential (Zp), pH, viscosity, and entrapment efficiency. It was further evaluated for shape and morphological analysis, in vitro release, cell viability, and in vivo efficacy against post SCI-like conditions in terms of behavioral assessment, histopathological evaluation, and immunoflorescence assay of the histological sections showing Bax-driven apoptosis. Entrapment efficiency, particle size, PDI, and Zp of spherical-shaped, smooth-surfaced MNE droplets were found to be 68.9%, 83.2 ± 14.4 nm, 0.231, and + 62.7 mV, respectively. In vitro release of MP from MNE and albumin-MNE was observed to be 68.5 and 72.2% after 96th hour of the study. MNE showed higher viability of astrocytes than MP solution. Albumin-MNE improved behavior of SCI rat and histopathological conditions in a very effective manner when compared with MNE. Immunoflorescence assay reveals explicit decline in mitochondrial-mediated apoptosis by sub-cellular upregulation of Bax at spinal cord injury site. In conclusion, albumin-MNE delivered MP specifically at SCI site and avoided its instant availability inside astrocytes culture. On account of which the chitosan stabilized, lecithin-emulsified, multilayered nanoemulsion of MP depicts higher efficacy and safety than MNE and may offer safe and effective mean for the treatment of post SCI-like conditions in human.     

Development of a chitosan-based nanoparticle formulation for delivery of a hydrophilic hexapeptide, dalargin

Nanoparticle based delivery systems can offer opportunities for targeting, controlled release, and enhanced stability of their drug, protein, or gene therapy payload. This study investigated the use of chitosan in combination with the ionic additives sulfobutyl-ether-7-beta-cyclodextrin (SB-CD) or SB-CD/dextran sulfate (SB-CD/DS) mixture in comparison with chitosan: DS in the formulation of nanoparticles incorporating the hexapeptide dalargin. The physical characteristics (particle size, zeta potential), entrapment and loading efficiency, and release of dalargin were quantified. It was demonstrated that anionic cyclodextrin, SB-CD, can be used in complex coacervation with chitosan, with and without the presence of DS, to form nanoparticles. The presence of SB-CD or DS in the nanoparticle formulation and the weight ratio of chitosan to anionic additive(s) influenced the physical properties of the nanoparticles and their ability to carry dalargin. In addition, the particle size of nanoparticles was also affected by the molecular weight of chitosan and DS. The use of either DS or SB-CD/DS mixture produced chitosan nanoparticles with small particle size, high dalargin entrapment efficiency, enhanced peptide stability, and sustained release characteristics.     

Design and development of low cost polyurethane biopolymer based on castor oil and glycerol for biomedical applications

In the current study, we present the synthesis of novel low cost bio‐polyurethane compositions with variable mechanical properties based on castor oil and glycerol for biomedical applications. A detailed investigation of the physicochemical properties of the polymer was carried out by using mechanical testing, ATR‐FTIR, and X‐ray photoelectron spectroscopy (XPS). Polymers were also tested in short term in‐vitro cell culture with human mesenchymal stem cells to evaluate their biocompatibility for potential applications as biomaterial. FTIR analysis confirmed the synthesis of castor oil and glycerol based PU polymers. FTIR also showed that the addition of glycerol as co‐polyol increases crosslinking within the polymer backbone hence enhancing the bulk mechanical properties of the polymer. XPS data showed that glycerol incorporation leads to an enrichment of oxidized organic species on the surface of the polymers. Preliminary investigation into in vitro biocompatibility showed that serum protein adsorption can be controlled by varying the glycerol content with polymer backbone. An alamar blue assay looking at the metabolic activity of the cells indicated that castor oil based PU and its variants containing glycerol are non‐toxic to the cells. This study opens an avenue for using low cost bio‐polyurethane based on castor oil and glycerol for biomedical applications.     

Effect of a small molecule on diffusion and swelling properties of selected polysaccharide gel beads

The effect of a small molecule (e.g., sodium fluorescein, SF) on the swelling properties of and diffusion from calcium polysaccharide (alginate or pectin) gel beads was investigated. The gel beads were prepared by ionotropic gelation, soaked in different concentrations of SF solution, and then dried. The swelling behavior and release of SF from the dried beads were investigated. After soaking in SF, the beads swelled to sizes that depended on the initial concentration of SF. However, the size of the dried beads was independent of the SF concentration. The swelling of the beads occurred quite rapidly and reached a maximum within 2 h. Although most beads swelled to a size which was less than their original size of wet beads, some of them swelled much more than their original wet size. Higher concentration of SF and lower concentration of sodium alginate provided a greater increase in weight. The release profile of SF from dried gel beads in water consists of a burst or a very rapid release phase during the first 60 min followed by a much slower release phase. The similarity of the relative weight increase and release profiles of SF, suggests that swelling might contribute to release of SF, particularly during the burst phase.     

氟维司群纳米聚合物胶束的制备与表征

目的:本文目的是制备氟维司群纳米聚合物胶束,并对其体外特性进行表征。方法:采用生物可降解材料甲氧基聚乙二醇-b-聚D,L-丙交酯(m PEG-b-PDLLA),并用固体分散法制备氟维司群聚合物胶束。利用透射电子显微镜与马尔文激光粒度测定仪分析胶束的形态与粒径。用X射线单晶体衍射仪定性测试胶束包封性。建立并验证氟维司群高效液相色谱(HPLC)分析方法,定量测定胶束载药量与包封率。采用透析袋法分析胶束体外释放情况。结果:氟维司群聚合物胶束形态圆整、分散均匀无粘连,粒径为89.97±4.33 nm,多分散指数为0.162±0.023,载药量与包封率达8.95%±0.86%与97.25%±0.86%。胶束释药具有明显的缓释特点。结论:成功制备氟维司群胶束并显著提高其水溶性,表现良好的缓释行为,能够开发为氟维司群的新型纳米制剂。     

<Emphasis Type="Italic">In Vitro</Emphasis> Characterization and Evaluation of the Cytotoxicity Effects of Nisin and Nisin-Loaded PLA-PEG-PLA Nanoparticles on Gastrointestinal (AGS and KYSE-30), Hepatic (HepG2) and Blood (K562) Cancer Cell Lines

The aim of this study was an in vitro evaluation and comparison of the cytotoxic effects of free nisin and nisin-loaded PLA-PEG-PLA nanoparticles on gastrointestinal (AGS and KYSE-30), hepatic (HepG2), and blood (K562) cancer cell lines. To create this novel anti-cancer drug delivery system, the nanoparticles were synthesized and then loaded with nisin. Subsequently, their biocompatibility, ability to enter cells, and physicochemical properties, including formation, size, and shape, were studied using hemolysis, fluorescein isothiocyanate (FITC), Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), and scanning electron microscopy (SEM), respectively. Then, its loading efficiency and release kinetics were examined to assess the potential impact of this formulation for the nanoparticle carrier candidacy. The cytotoxicities of nisin and nisin-loaded nanoparticles were evaluated by using the MTT and Neutral Red (NR) uptake assays. Detections of the apoptotic cells were done via Ethidium Bromide (EB)/Acridine Orange (AO) staining. The FTIR spectra, SEM images, and DLS graph confirmed the formations of the nanoparticles and nisin-loaded nanoparticles with spherical, distinct, and smooth surfaces and average sizes of 100 and 200 nm, respectively. The loading efficiency of the latter nanoparticles was about 85–90%. The hemolysis test represented their non-cytotoxicities and the FITC images indicated their entrance inside the cells. An increase in the percentage of apoptotic cells was observed through EB/AO staining. These results demonstrated that nisin had a cytotoxic effect on AGS, KYSE-30, HepG2, and K562 cancer cell lines, while the cytotoxicity of nisin-loaded nanoparticles was more than that of the free nisin.     

Polymeric Nanoparticles as Oral Delivery Systems for Encapsulation and Release of Polyphenolic Compounds: Impact on Quercetin Antioxidant Activity & Bioaccessibility

A delivery system containing polymeric (Eudragit) nanoparticles has been developed for encapsulation and controlled release of bioactive flavonoids (quercetin). Nanoparticles were fabricated using a solvent displacement method. Particle size, morphology, and charge were measured by light scattering, electron microscopy and ??-potential. Encapsulation efficiency (EE) and release profiles were determined using electrochemical methods. Molecular interactions within the particle matrix were characterized by X-ray diffraction, differential scanning calorimetry, and infrared spectroscopy. Antioxidant properties of free and encapsulated quercetin were analyzed by TBARS and fluorescence spectroscopy. Bioaccessibility of quercetin was evaluated using an in vitro digestion model. Relatively small (d????370?nm) anionic polymeric nanoparticles were formed containing quercetin in a non-crystalline form (EE????67?%). The main interaction between quercetin and Eudragit was hydrogen bonding. Encapsulated quercetin remained stable during 6?months storage and maintained its antioxidant activity. Quercetin bioaccessibility within simulated small intestinal conditions was improved by encapsulation. The knowledge obtained from this study will facilitate the rational design and fabrication of polymeric nanoparticles as oral delivery systems for encapsulation, protection, and release of bioactive compounds.     

A Particle‐Controlled,High‐Performance,Gum‐Like Electrolyte for Safe and Flexible Energy Storage Devices

Storing energy within flexible and safe materials is one of the most important goals for energy storage devices. To that end, high‐performance conformable electrolytes, which can transport ions quickly and safely, and can also effectively separate and bond strongly to the two electrodes, are of great importance. However, it is challenging to develop an electrolyte that can play these multiple roles simultaneously. Here, aiming to overcome this challenge, a particle‐based approach to the fabrication of a high‐performance, gum‐like electrolyte is described. The intriguing properties of the gum‐like electrolyte include high ionic conductivity, good mechanical properties, excellent adhesion properties, and, more importantly, thermal‐protection capability. It is shown that these significant properties are well‐controlled by the incorporation of wax particles with variable size, loading, and surface properties that can be designed through the use of an apporpriate surfactant. This provides a promising solution for high‐performance electrolytes and indicates a cost‐effective approach to fabricating multifunctional ion‐conducting materials.     

Effect of formulation factors on incorporation of the hydrophilic peptide dalargin into PLGA and mPEG-PLGA nanoparticles

The objective of this study was to examine formulation factors that influence the incorporation of the hydrophilic peptide dalargin into poly(D, L-lactic-co-glycolic acid) (PLGA) and methoxy-polyethylene glycol (mPEG)-PLGA nanoparticles. In particular, the effect of ionic additives and nanoparticle method of preparation on the incorporation of dalargin and resultant nanoparticle properties was investigated. Biodegradable nanoparticles were prepared from mPEG-PLGA and PLGA by both solvent evaporation and solvent diffusion methods with inclusion of ionic additives of dextran sulphate (DS), sulfobutyl ether-beta-cyclodextrin (SB-CD), or sodium dodecyl sulfate (SDS). The resultant nanoparticles were analyzed for their mean particle size and size distribution, zeta-potential, peptide loading, yield, and morphology. The inclusion of ionic additives in the nanoparticle formulation significantly influenced dalargin entrapment efficiency (EE). For example, with the PLGA/SDS formulation EE increased from 13.3% to 91.2% and from 4.1% to 68.6% with the solvent diffusion and evaporation methods, respectively. The inclusion of ionic surfactant SDS has also lead to the formation of smaller size of nanoparticles. Isothermal titration microcalorimetry revealed a strong interaction between dalargin and DS, medium level interaction with SDS, and weak interaction with SB-CD. The results of this study suggest that a strong ionic interaction between peptides and additives may lead to enhanced peptide incorporation but also increased particle size. Intermediate ionic interaction, especially when it is associated with the formation of reversed micelles in a hydrophobic polymer solution, could be used to enhance the incorporation of hydrophilic peptides in PLGA and mPEG-PLGA nanoparticles.     

Zero and second‐derivative synchronous fluorescence spectroscopy for the quantification of two non‐classical β‐lactams in pharmaceutical vials: Application to stability studies

The formation of metal chelates with various ligands may lead to the production of fluorescent chelates or enhance the fluorescence of the chelating agent. This paper describes two sensitive, selective and computer‐solved methods, namely, zero order (SF) and second‐derivative synchronous spectrofluorimetry (SDSFS) for nano‐quantitation of two carbapenems; meropenem (MP) and ertapenem (EP). The methods are based on the chelation of MP with Tb³⁺ and EP with Zr⁴⁺ in buffered organic medium at pH 4.0 to produce fluorescent chelates. In the zero order method, the relative synchronous fluorescence intensity is measured at 327.0 nm at Δλ = 70.0 and 100.0 nm for MP and EP, respectively. The second method utilizes a second‐derivative technique to enhance the method selectivity and emphasize a stability‐indicating approach. The peak amplitudes (²D) of the second‐derivative synchronous spectra were estimated to be 333.06 and 330.06 nm for MP and EP, respectively. The proposed synchronous spectrofluorimetric methods were validated according to the International Conference on Harmonization (ICH) guidelines and applied successfully for the analysis of MP and EP in pure forms, pharmaceutical vials and in synthetic mixtures with different degradants of both drugs. Under optimum conditions, the mole‐ratio method was applied and the co‐ordination ratios of MP–Tb³⁺ and EP–Zr⁴⁺chelates were found to be 1:1 and 1:3. The formation constants for the chelation complexes were evaluated using the Benesi–Hildebrand's equation; the free energy change (ΔG) was also calculated. The results indicated that EP–Zr⁴⁺ was more stable than the MP–Tb³⁺ chelate. Moreover, the developed methods were found to be selective and inexpensive for quantitative determination of both drugs in quality control laboratories at nano‐levels.