共查询到20条相似文献,搜索用时 31 毫秒
1.
3D‐printed individual labware in biosciences by rapid prototyping: In vitro biocompatibility and applications for eukaryotic cell cultures
下载免费PDF全文
![点击此处可从《Engineering in Life Science》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Tim H. Lücking Franziska Sambale Birte Schnaars David Bulnes‐Abundis Sascha Beutel Thomas Scheper 《Engineering in Life Science》2015,15(1):57-64
Three‐dimensional (3D) printing techniques are continuously evolving, thus their application fields are also growing very fast. The applications discussed here highlight the use of rapid prototyping in a dedicated biotechnology laboratory environment. The combination of improving prototypes using fused deposition modeling printers and producing useable parts with selective laser sintering printers enables a cost‐ and time‐efficient use of such techniques. Biocompatible materials for 3D printing are already available and the printed parts can directly be used in the laboratory. To demonstrate this, we tested 3D printing materials for their in vitro biocompatibility. To exemplify the versatility of the 3D printing process applied to a biotechnology laboratory, a normal well plate design was modified in silico to include different baffle geometries. This plate was subsequently 3D printed and used for cultivation. In the near future, this design and print possibility will revolutionize the industry. Advanced printers will be available for laboratories and can be used for creating individual labware or standard disposables on demand. These applications have the potential to change the way research is done and change the management of stock‐keeping, leading to more flexibility and promoting creativity of the scientists. 相似文献
2.
Although the microbiology laboratory paradigm has increasingly changed from manual to automated procedures, and from functional to molecular methods, traditional culture methods remain vital. Using inexpensive desktop fused filament fabrication 3D printing, we designed, produced and tested rapid prototypes of customised labware for microbial culture namely frames to make dip slides, inoculation loops, multi-pin replicators, and multi-well culture plates for solid medium. These customised components were used to plate out samples onto solid media in various formats, and we illustrate how they can be suitable for many microbiological methods such as minimum inhibitory concentration tests, or for directly detecting pathogens from mastitis samples, illustrating the flexibility of rapid-prototyped culture consumable parts for streamlining microbiological methods. We describe the methodology needed for microbiologists to develop their own novel and unique tools, or to fabricate and customise existing consumables. A workflow is presented for designing and 3D printing labware and quickly producing easy-to-sterilise and re-useable plastic parts of great utility in the microbiology laboratory. 相似文献
3.
Xiaocong Tian Jun Jin Shangqin Yuan Chee Kai Chua Shu Beng Tor Kun Zhou 《Liver Transplantation》2017,7(17)
Three‐dimensional (3D) printing, a layer‐by‐layer deposition technology, has a revolutionary role in a broad range of applications. As an emerging advanced fabrication technology, it has drawn growing interest in the field of electrochemical energy storage because of its inherent advantages including the freeform construction and controllable 3D structural prototyping. This article focuses on the topic of 3D‐printed electrochemical energy storage devices (EESDs), which bridge advanced electrochemical energy storage and future additive manufacturing. Basic 3D printing systems and material considerations are described to provide a fundamental understanding of printing technologies for the fabrication of EESDs. The performance metrics of 3D‐printed EESDs are then given and the related performance optimization strategies are discussed. Next, the recent advances of 3D‐printed EESDs, including sandwich‐type and in‐plane architectures, are summarized. Conclusions and future perspectives with some unique challenges and important directions are then discussed. It can be expected that, with the help of 3D printing technology, the development of advanced electrochemical energy storage systems will be greatly promoted. 相似文献
4.
Extrusion‐based bio‐printing has great potential as a technique for manipulating biomaterials and living cells to create three‐dimensional (3D) scaffolds for damaged tissue repair and function restoration. Over the last two decades, advances in both engineering techniques and life sciences have evolved extrusion‐based bio‐printing from a simple technique to one able to create diverse tissue scaffolds from a wide range of biomaterials and cell types. However, the complexities associated with synthesis of materials for bio‐printing and manipulation of multiple materials and cells in bio‐printing pose many challenges for scaffold fabrication. This paper presents an overview of extrusion‐based bio‐printing for scaffold fabrication, focusing on the prior‐printing considerations (such as scaffold design and materials/cell synthesis), working principles, comparison to other techniques, and to‐date achievements. This paper also briefly reviews the recent development of strategies with regard to hydrogel synthesis, multi‐materials/cells manipulation, and process‐induced cell damage in extrusion‐based bio‐printing. The key issue and challenges for extrusion‐based bio‐printing are also identified and discussed along with recommendations for future, aimed at developing novel biomaterials and bio‐printing systems, creating patterned vascular networks within scaffolds, and preserving the cell viability and functions in scaffold bio‐printing. The address of these challenges will significantly enhance the capability of extrusion‐based bio‐printing. 相似文献
5.
Ashwin Anandhapadman Ajay Venkateswaran Hariharan Jayaraman Nalinkanth Veerabadran Ghone 《Biotechnology progress》2022,38(3):e3234
The conventional methods of using autografts and allografts for repairing defects in bone, the osteochondral bone, and the cartilage tissue have many disadvantages, like donor site morbidity and shortage of donors. Moreover, only 30% of the implanted grafts are shown to be successful in treating the defects. Hence, exploring alternative techniques such as tissue engineering to treat bone tissue associated defects is promising as it eliminates the above-mentioned limitations. To enhance the mechanical and biological properties of the tissue engineered product, it is essential to fabricate the scaffold used in tissue engineering by the combination of various biomaterials. Three-dimensional (3D) printing, with its ability to print composite materials and with complex geometry seems to have a huge potential in scaffold fabrication technique for engineering bone associated tissues. This review summarizes the recent applications and future perspectives of 3D printing technologies in the fabrication of composite scaffolds used in bone, osteochondral, and cartilage tissue engineering. Key developments in the field of 3D printing technologies involves the incorporation of various biomaterials and cells in printing composite scaffolds mimicking physiologically relevant complex geometry and gradient porosity. Much recently, the emerging trend of printing smart scaffolds which can respond to external stimulus such as temperature, pH and magnetic field, known as 4D printing is gaining immense popularity and can be considered as the future of 3D printing applications in the field of tissue engineering. 相似文献
6.
《中国科学:生命科学英文版》2015,(5)
Three-dimensional(3D) printing technology has been widely used in various manufacturing operations including automotive, defence and space industries. 3D printing has the advantages of personalization, flexibility and high resolution, and is therefore becoming increasingly visible in the high-tech fields. Three-dimensional bio-printing technology also holds promise for future use in medical applications. At present 3D bio-printing is mainly used for simulating and reconstructing some hard tissues or for preparing drug-delivery systems in the medical area. The fabrication of 3D structures with living cells and bioactive moieties spatially distributed throughout will be realisable. Fabrication of complex tissues and organs is still at the exploratory stage. This review summarize the development of 3D bio-printing and its potential in medical applications, as well as discussing the current challenges faced by 3D bio-printing. 相似文献
7.
Yue Yao Mingming Hu Francesco Di Maio Stefano Cucurachi 《Journal of Industrial Ecology》2020,24(1):116-127
Three‐dimensional (3D) printing and geo‐polymers are two environmentally oriented innovations in concrete manufacturing. The 3D printing of concrete components aims to reduce raw material consumption and waste generation. Geo‐polymer is being developed to replace ordinary Portland cement and reduce the carbon footprint of the binder in the concrete. The environmental performance of the combined use of the two innovations is evaluated through an ex‐ante life cycle assessment (LCA). First, an attributional LCA was implemented, using data collected from the manufacturer to identify the hotspots for environmental improvements. Then, scaled‐up scenarios were built in collaboration with the company stakeholder. These scenarios were compared with the existing production system to understand the potential advantages/disadvantages of the innovative system and to identify the potential directions for improvement. The results indicate that 3D printing can potentially lead to waste reduction. However, depending on its recipe, geo‐polymer likely has higher environmental impacts than ordinary concrete. The ex‐ante LCA suggests that after step‐by‐step improvements in the production and transportation of raw materials, 3D printing geo‐polymer concrete is able to reduce the carbon footprint of concrete components, while it does still perform worse on impact categories, such as depletion of abiotic resources and stratospheric ozone depletion. We found that the most effective way to lower the environmental impacts of 3D concrete is to reduce silicate in the recipe of the geo‐polymer. This approach is, however, challenging to realize by the company due to the locked‐in effect of the previous innovation investment. The case study shows that to support technological innovation ex‐ante LCA has to be implemented as early as possible in innovation to allow for maintaining technical flexibility and improving on the identified hotspots. 相似文献
8.
3D打印(3D printing)是以数字化模型为基础,运用粉末状金属或塑料等可粘合材料,通过逐层打印的方式构造物体的一项技术。由于3D打印具有灵活和精密的特点,这一技术已经在军工、航天等制造行业中发挥了重要作用。鉴于3D打印的独特优势,该技术也可以在植物繁殖生态学研究中发挥作用而且具有广阔的应用前景,但目前还处于探索阶段。该文概述了3D打印技术以及植物繁殖生态学的花特征进化研究,同时总结了3D打印技术在植物繁殖生态学领域的最新研究进展,并探讨将来可能的发展方向。 相似文献
9.
Suihong Liu Qingxi Hu Zhipeng Shen Sasirekha Krishnan Haiguang Zhang Murugan Ramalingam 《Biotechnology and bioengineering》2022,119(1):118-133
Three dimensional printable formulation of self-standing and vascular-supportive structures using multi-materials suitable for organ engineering is of great importance and highly challengeable, but, it could advance the 3D printing scenario from printable shape to functional unit of human body. In this study, the authors report a 3D printable formulation of such self-standing and vascular-supportive structures using an in-house formulated multi-material combination of albumen/alginate/gelatin-based hydrogel. The rheological properties and relaxation behavior of hydrogels were analyzed before the printing process. The suitability of the hydrogel in 3D printing of various customizable and self-standing structures, including a human ear model, was examined by extrusion-based 3D printing. The structural, mechanical, and physicochemical properties of the printed scaffolds were studied systematically. Results supported the 3D printability of the formulated hydrogel with self-standing structures, which are customizable to a specific need. In vitro cell experiment showed that the formulated hydrogel has excellent biocompatibility and vascular supportive behavior with the extent of endothelial sprout formation when tested with human umbilical vein endothelial cells. In conclusion, the present study demonstrated the suitability of the extrusion-based 3D printing technique for manufacturing complex shapes and structures using multi-materials with high fidelity, which have great potential in organ engineering. 相似文献
10.
3D Printing Quasi‐Solid‐State Asymmetric Micro‐Supercapacitors with Ultrahigh Areal Energy Density
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A 3D printing approach is first developed to fabricate quasi‐solid‐state asymmetric micro‐supercapacitors to simultaneously realize the efficient patterning and ultrahigh areal energy density. Typically, cathode, anode, and electrolyte inks with high viscosities and shear‐thinning rheological behaviors are first prepared and 3D printed individually on the substrates. The 3D printed asymmetric micro‐supercapacitor with interdigitated electrodes exhibits excellent structural integrity, a large areal mass loading of 3.1 mg cm?2, and a wide electrochemical potential window of 1.6 V. Consequently, this 3D printed asymmetric micro‐supercapacitor displays an ultrahigh areal capacitance of 207.9 mF cm?2. More importantly, an areal energy density of 73.9 µWh cm?2 is obtained, superior to most reported interdigitated micro‐supercapacitors. It is believed that the efficient 3D printing strategy can be used to construct various asymmetric micro‐supercapacitors to promote the integration in on‐chip energy storage systems. 相似文献
11.
3D‐Printed Cathodes of LiMn1−xFexPO4 Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium‐Ion Battery
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Jiangtao Hu Yi Jiang Suihan Cui Yandong Duan Tongchao Liu Hua Guo Lingpiao Lin Yuan Lin Jiaxin Zheng Khalil Amine Feng Pan 《Liver Transplantation》2016,6(18)
A 3D‐printing technology and printed 3D lithium‐ion batteries (3D‐printed LIBs) based on LiMn0.21Fe0.79PO4@C (LMFP) nanocrystal cathodes are developed to achieve both ultrahigh rate and high capacity. Coin cells with 3D‐printed cathodes show impressive electrochemical performance: a capacity of 108.45 mAh g?1 at 100 C and a reversible capacity of 150.21 mAh g?1 at 10 C after 1000 cycles. In combination with simulation using a pseudo 2D hidden Markov model and experimental data of 3D‐printed and traditional electrodes, for the first time deep insight into how to achieve the ultrahigh rate performance for a cathode with LMFP nanocrystals is obtained. It is estimated that the Li‐ion diffusion in LMFP nanocrystal is not the rate‐limitation step for the rate to 100 C, however, that the electrolyte diffusion factors, such as solution intrinsic diffusion coefficient, efficiency porosity, and electrode thickness, will dominate ultrahigh rate performance of the cathode. Furthermore, the calculations indicate that the above factors play important roles in the equivalent diffusion coefficient with the electrode beyond a certain thickness, which determines the whole kinetic process in LIBs. This fundamental study should provide helpful guidance for future design of LIBs with superior electrochemical performance. 相似文献
12.
One of the articles contained within European Council Directive 86/609/EEC states that "Persons who carry out experiments or take part in them, and persons who take care of animals used for experiments, including duties of a supervisory nature, shall have appropriate training". In effect, this article stipulates that only competent individuals are allowed to work with laboratory animals. At least three groups of individuals can be identified with different responsibilities toward experimental animals: animal technicians, scientists, and veterinarians/animal welfare officers. The responsibilities and duties of the individuals within each of these categories differ. This paper focuses on the training of scientists. The scientist designs, and often also performs, animal experiments. Therefore, scientists must be educated to develop an attitude of respect toward laboratory animals, and must be trained so that, if an experiment must be performed with animals, it is designed according to the highest possible scientific and ethical standards. In The Netherlands, the law stipulates that scientists intending to work with animals must have completed a course in laboratory animal science. This compulsory course started in 1986. The Department of Laboratory Animal Science at Utrecht University is responsible for the national coordination of this course. Participants must have an academic degree (at the level of MSc) in one of the biomedical sciences, such as biology, medicine or veterinary medicine. Although the course is an intensive 3-week, 120-hour long course, which covers both technical and ethical aspects of laboratory animal experimentation, it cannot provide full competence. It is designed to provide sufficient basic training and knowledge to enable students to design animal experiments, and to develop an attitude that will be conducive to the implementation of the Three Rs. However, full competence will always require further training that can only be acquired as a result of practical experience gained while working in the field of laboratory animal research. Evaluations subsequent to the course have revealed that more than 98% of the students regard the course as indispensable for all scientists working in a research area where animal experiments are performed. They agree that the course not only contributes to the quality of experiments and to the welfare of animals, but also to a decrease in the number of animals used in experiments. 相似文献
13.
14.
Changxue Xu Wenxuan Chai Yong Huang Roger R. Markwald 《Biotechnology and bioengineering》2012,109(12):3152-3160
The capability to print three‐dimensional (3D) cellular tubes is not only a logical first step towards successful organ printing but also a critical indicator of the feasibility of the envisioned organ printing technology. A platform‐assisted 3D inkjet bioprinting system has been proposed to fabricate 3D complex constructs such as zigzag tubes. Fibroblast (3T3 cell)‐based tubes with an overhang structure have been successfully fabricated using the proposed bioprinting system. The post‐printing 3T3 cell viability of printed cellular tubes has been found above 82% (or 93% with the control effect considered) even after a 72‐h incubation period using the identified printing conditions for good droplet formation, indicating the promising application of the proposed bioprinting system. Particularly, it is proved that the tubular overhang structure can be scaffold‐free fabricated using inkjetting, and the maximum achievable height depends on the inclination angle of the overhang structure. As a proof‐of‐concept study, the resulting fabrication knowledge helps print tissue‐engineered blood vessels with complex geometry. Biotechnol. Bioeng. 2012; 109: 3152–3160. © 2012 Wiley Periodicals, Inc. 相似文献
15.
Niklas Erdmann Felix Kstner Kristin de Payrebrune Dorina Strieth 《Engineering in Life Science》2022,22(12):760
When using microbiologically induced calcium carbonate precipitation (MICP) to produce calcium carbonate crystals in the cavities between mineral particles to consolidate them, the inhomogeneous distribution of the precipitated calcium carbonate poses a problem for the production of construction materials with consistent parameters. Various approaches have been investigated in the literature to increase the homogeneity of consolidated samples. One approach can be the targeted application of ureolytic organisms by 3D printing. However, to date, this possibility has been little explored in the literature. In this study, the potential to use MICP to print calcium carbonate layers on mineral particles will be investigated. For this purpose, a dispensing unit was modified to apply both a suspension of Sporosarcina pasteurii and a calcination solution containing urea and calcium chloride onto quartz sand. The study showed that after passing through the nozzle, S. pasteurii preserved consistent cell vitality and therefore its potential of MICP. Applying cell suspension and calcination solution through a printing nozzle resulted in a layer of calcium carbonate crystals on quartz sand. This observation demonstrated the proof of concept of printing calcium carbonate by MICP through the nozzle of a dispensing unit. Furthermore, it was shown that cell suspensions of S. pasteurii can be stored at 4°C for a period of 17 days while maintaining its optical density, urease activity and cell vitality and therefore the potential for MICP. This initial concept could be extended in further research to printing three‐dimensional (3D) objects to solve the problem of homogeneity in consolidated mineral particles. 相似文献
16.
Applications of genetic programming in cancer research 总被引:1,自引:0,他引:1
Worzel WP Yu J Almal AA Chinnaiyan AM 《The international journal of biochemistry & cell biology》2009,41(2):405-413
The theory of Darwinian evolution is the fundamental keystones of modern biology. Late in the last century, computer scientists began adapting its principles, in particular natural selection, to complex computational challenges, leading to the emergence of evolutionary algorithms. The conceptual model of selective pressure and recombination in evolutionary algorithms allow scientists to efficiently search high dimensional space for solutions to complex problems. In the last decade, genetic programming has been developed and extensively applied for analysis of molecular data to classify cancer subtypes and characterize the mechanisms of cancer pathogenesis and development. This article reviews current successes using genetic programming and discusses its potential impact in cancer research and treatment in the near future. 相似文献
17.
Advances in catheter-based interventions in structural and congenital heart disease have mandated an increased demand for three-dimensional (3D) visualisation of complex cardiac anatomy. Despite progress in 3D imaging modalities, the pre- and periprocedural visualisation of spatial anatomy is relegated to two-dimensional flat screen representations. 3D printing is an evolving technology based on the concept of additive manufacturing, where computerised digital surface renders are converted into physical models. Printed models replicate complex structures in tangible forms that cardiovascular physicians and surgeons can use for education, preprocedural planning and device testing. In this review we discuss the different steps of the 3D printing process, which include image acquisition, segmentation, printing methods and materials. We also examine the expanded applications of 3D printing in the catheter-based treatment of adult patients with structural and congenital heart disease while highlighting the current limitations of this technology in terms of segmentation, model accuracy and dynamic capabilities. Furthermore, we provide information on the resources needed to establish a hospital-based 3D printing laboratory. 相似文献
18.
M. Rampichová E. Košt'áková Kuželová E. Filová J. Chvojka J. Šafka M. Pelcl 《Cell Adhesion & Migration》2018,12(3):271-285
Additive manufacturing, also called 3D printing, is an effective method for preparing scaffolds with defined structure and porosity. The disadvantage of the technique is the excessive smoothness of the printed fibers, which does not support cell adhesion. In the present study, a 3D printed scaffold was combined with electrospun classic or structured nanofibers to promote cell adhesion. Structured nanofibers were used to improve the infiltration of cells into the scaffold. Electrospun layers were connected to 3D printed fibers by gluing, thus enabling the fabrication of scaffolds with unlimited thickness. The composite 3D printed/nanofibrous scaffolds were seeded with primary chondrocytes and tested in vitro for cell adhesion, proliferation and differentiation. The experiment showed excellent cell infiltration, viability, and good cell proliferation. On the other hand, partial chondrocyte dedifferentiation was shown. Other materials supporting chondrogenic differentiation will be investigated in future studies. 相似文献
19.
Three‐dimensional protein localization intricately determines the functional coordination of cellular processes. The complex spatial context of protein landscape has been assessed by multiplexed immunofluorescent staining or mass spectrometry, applied to 2D cell culture with limited physiological relevance or tissue sections. Here, we present 3D SPECS, an automated technology for 3D Spatial characterization of Protein Expression Changes by microscopic Screening. This workflow comprises iterative antibody staining, high‐content 3D imaging, and machine learning for detection of mitoses. This is followed by mapping of spatial protein localization into a spherical, cellular coordinate system, a basis for model‐based prediction of spatially resolved affinities of proteins. As a proof‐of‐concept, we mapped twelve epitopes in 3D‐cultured spheroids and investigated the network effects of twelve mitotic cancer drugs. Our approach reveals novel insights into spindle fragility and chromatin stress, and predicts unknown interactions between proteins in specific mitotic pathways. 3D SPECS's ability to map potential drug targets by multiplexed immunofluorescence in 3D cell culture combined with our automated high‐content assay will inspire future functional protein expression and drug assays. 相似文献
20.
ABSTRACTThis paper presents an active learning approach that focuses on practical investigation of the ecosystem of tidal flats using 3D modeling and printing for biology students in order to enhance understanding of natural selection. The learning approach for the study followed a 5-step procedure: i) learning about 3D modeling and printing, ii) exploration of the ecosystem of tidal flats, iii) 3D designing of a bird beak, iv) 3D printing of a constructed beak, and v) a natural selection simulation activity. The learning method presented in this study centered on active student exploration of the tidal flats ecosystem using 3D modeling and printing. The learning approach presented in this paper could be implicated at schools to aid in students’ understanding of natural selection as it allows students to firsthand examine simulation changes to a bird beak and benthic communities. This study suggested the active learning method for natural selection as it incorporates student-designed exploration and direct investigative appraisal of the selection process. 相似文献