Mutagenic SOS repair of site-specific psoralen damage in plasmid pBR322

The mutagenic repair of psoralen damage was examined by transforming Escherichia coli with psoralen-treated pBR322. Plasmid DNA randomly reacted with psoralen was repaired only when the E. coli was uvrA⁺ and recA⁺, and only when the cells were pre-irradiated with far-ultraviolet light. The recA dependence and requirement for pre-irradiation are characteristics of SOS repair.Psoralens were placed specifically near the BamHI site, in the tetracycline-resistance gene of pBR322, using a sulfhydryl-containing psoralen derivative. Repair of this damage also required pre-irradiation of the host cells. This repair was accompanied by a 4% frequency of mutagenesis to a tetraeycline-sensitive phenotype. Sequence analysis of these mutant plasmids revealed that 75% had mutations within the targeted region, while 25% had no sequence changes within 100 bases of the BamHI site. In up to five independent isolates only one kind of mutation was observed at each site, suggesting that mutagenic SOS repair is influenced by DNA structure at the site of the psoralen. Most mutations were transitions, primarily G-C to A-T changes. Some transitions occurred at sites where psoralen crosslinks could not have formed, and these may have arisen from the repair of psoralen monoadducts.     

pHG165: A pBR322 copy number derivative of pUC8 for cloning and expression

During the construction of the Messing pUC plasmid series, the rop(rom) gene of pBR322 which mediates the activity of RNAI was deleted. This has resulted in an elevated copy number for the pUC plasmids which makes the expression of beta-galactosidase activity constitutive in a host containing the Iqtss lac repressor. We describe the construction of a new series of vectors which retain the pUC multiple cloning site (MCS) but in which copy number control has been recovered. In addition, the lac alpha/lac promoter expression region has been inserted into a HpaI cassette. This facilitates the movement of recombinant DNA clones within the MCS. It also increases the complementation activity of the lac alpha peptide by an order of magnitude, allowing selection of recombinants by their Lac- phenotype on MacConkey agar.     

Partition functions of unit-copy plasmids can stabilize the maintenance of plasmid pBR322 at low copy number.

The maintenance of plasmid pBR322 is highly unstable in a polA12 strain of Escherichia coli at 29 degrees C due to severely reduced copy number. Under these conditions, introduction of the par (partition) locus of plasmid P1 or the par (sop) region of F into pBR322 stabilizes it. A region with similar activity was detected in the P7 plasmid. The activity of the P1 par locus was dependent on the P1 parA gene product and was sensitive to par-specified incompatibility.     

Role of the rom protein in copy number control of plasmid pBR322 at different growth rates in Escherichia coli K-12

The copy number per cell mass of plasmid pBR322 and a rom- derivative was measured as a function of generation time. In fast growing cells the copy number per cell mass was virtually identical for rom+ and rom- derivatives. However, the copy number of pBR322 only increased 3- to 4-fold from a 20- to 80-min generation time, whereas the copy number of the rom- derivative increased 7- to 10-fold. The copy number stayed constant for the rom+ and rom- plasmids at generation times longer than 80-100 min. Thus, the presence of the rom gene decreased the copy number of plasmid pBR322 in slowly growing cells at least 2-fold when compared with the rom- plasmid. To study the effect of the rom gene in trans we cloned the gene into the compatible P15A-derived rom- plasmid pACYC184. In cells carrying both pACYC184 rom+ and pBR322 rom- the presence of the rom gene in trans had little effect on the copy number of pBR322 rom- at fast growth, but it decreased its copy number at slow growth to the same level as found for pBR322, i.e., complemented the pBR322 rom- plasmid. The pACYC184 plasmid and its rom+ derivatives showed copy numbers similar to those of pBR322 rom- and pBR322 itself, respectively, at fast and slow growth. We conclude that the rom gene product-the Rom protein-is an important element in copy number control of ColE1-type plasmids especially in slowly growing cells.     

A family of arabinose-inducible Escherichia coli expression vectors having pBR322 copy control

The pBAD series of expression vectors have been widely used in Escherichia coli, Salmonella enterica, and related bacteria. However, a complication with pBAD24, the most popular of these plasmids, is that it does not contain the complete functional replication origin of pBR322 as was depicted in the original paper. Instead, pBAD24 has a pBR322-derived origin that lacks the rop gene that negatively regulates copy number and thus pBAD24 has an appreciably higher copy number than that of pBR322, particularly at elevated growth temperatures. A rop-containing derivative of pBAD24 (called pBAD322) having the copy number of pBR322 is reported together with derivatives of pBAD322 that encode resistance to chloramphenicol, kanamycin, tetracycline, spectinomycin/streptomycin, gentamycin, or trimethoprim in place of ampicillin.     

Transduction of multi-copy plasmid pBR322 by bacteriophage Mu

Summary The temperate bacteriophage Mu transduces the 4363 bp multi-copy plasmid pBR322 at frequencies similar to those of chromosomal markers. Plasmid transducing particles contain DNA molecules of Mu DNA length. Plasmid DNA is transduced as a head-to-tail oligomer that becomes circularized in the recipient cell. The rec system of the donor strain participates in oligomer formation and the rec system of the recipient strain is required for oligomer circularization. Possible mechanisms that may explain the origin of plasmid transducing particles are discussed.     

Mutations in a new chromosomal gene of Escherichia coli K-12, pcnB, reduce plasmid copy number of pBR322 and its derivatives

Summary We describe mutants of Escherichia coli that decrease the plasmid copy number of pBR322 derivatives. One mutant was partially characterized genetically and its mutation, designated pcnB for plasmid copy number, was mapped to approximately 3 min on the E. coli chromosome. This locus is distinct from other genes whose products are known to affect plasmid replication or stable plasmid maintenance. The pcnB mutant strain should be useful for cloning genes into pBR322 that have aberrant or deleterious effects on the cell when present in high copy number.     

High-copy-number derivatives of the plasmid cloning vector pBR322

A stable copy-number mutant of a pBR322-derived plasmid was isolated. The mutation was found to be a single G → T transversion located near the 3' end of a DNA segment coding for the regulatory RNA I. The resulting copy number for this plasmid is approx. 1000 per cell or 65 % of total cellular DNA. Several cloning vectors have been constructed from this copy-number mutant and their practical application is discussed.     

Rifampin-resistant replication of pBR322 derivatives in Escherichia coli cells induced for the SOS response.

Replication of plasmid pBR322 in Escherichia coli cells normally requires RNA synthesis and thus is sensitive to rifampin, an inhibitor of RNA polymerase. In cells induced for the SOS response, however, derivatives of pBR322 were found to replicate in the presence of rifampin. This rifampin-resistant replication of pBR322 requires the insertion of certain sequences of DNA. The replication depends on recF+ and DNA polymerase I.     

Molecular cloning in plasmid pBR322 giving altered expression of the tetracycline resistance gene

The two HindIII fragments of polyoma virus DNA were cloned in the HindIII site of plasmid pBR322, a site located in the RNA polymerase promoter involved in the expression of tetracycline resistance. Although insertion of foreign DNA into this site did not always result in the complete loss of tetracycline resistance, Escherichia coli K12 strain chi 1776 harbouring recombinant plasmids exhibited reduced growth properties in liquid culture with tetracycline and could easily be differentiated from bacteria transformed by non-recombinant plasmids. The formation of plasmid multimers increased the resistance to tetracycline at the level of the induction period, presumably as a result of a gene dosage effect.     

The expression of integrated plasmid DNA depends on copy number

The effect of copy number, integration site, and enhancers on the expression of stably integrated exogenous DNA was examined in Chinese hamster cells. Three similar plasmids were constructed with the mouse beta maj-globin promoter fused to the galK gene either with no enhancer or with the SV40 or Harvey sarcoma virus (HaSV) enhancer. Eighteen stable cell lines were obtained and characterized with respect to plasmid copy number and galactokinase activity. At copy numbers of four or less, the enhancers showed detectable activity and a DNase I hypersensitive site was present. Above four copies, gene activity decreased as the copy number increased, the enhancer sequences were apparently inactive, and the DNase I hypersensitive site disappeared. These data suggest that, at least in this model system, when exogenous DNA is integrated as multiple head-to-tail copies, the entire multigene unit expresses poorly and inappropriately. When the same exogenous DNA integrates as a single (or low number) copy, expression appears to be relatively normal as judged by enhancer stimulation and DNase I hypersensitivity.     

A new revision of the sequence of plasmid pBR322

A revised sequence in the region immediately upstream from the rop gene of pBR322 is reported. Two base pairs in the accepted sequence do not exist in the plasmid DNA. Specifically, a TA base pair is missing at sequence coordinate 1893 [Sutcliffe, Cold Spring Harbor Symp. Quant. Biol. 43 (1979) 77–90] and an AT base pair is missing at position 1915, giving a total size for pBR322 of 4361 bp. These changes are in a potential translation initiation sequence and probably reflect errors in the original sequence rather than recent evolution of the plasmid.     

Monte Carlo simulation of DNA strand-break induction in supercoiled plasmid pBR322 DNA from indirect effects

We present a new Monte Carlo simulation code system (DBREAK) of the detailed events that occur when ionizing radiation interacts with water and DNA molecules. The model treats the initial energy deposition by radiation, the formation of chemically active species, subsequent diffusion-controlled chemical reactions, and induction of DNA strand breaks. DBREAK assumes one-hit single-strand break (SSB) and two-hit double-strand break (DSB) mechanisms. A high-resolution model of plasmid DNA structure has been introduced. The calculated results are compared with the results of previously performed experiments of the same type. Under aerobic conditions, 89.4% of the DNA damage was attributed to OH-radical and 10.5% and 0.1% to e^– _aq and H, respectively. We also compared the differences between liquid-water track structure and gas-phase-water track structure. The calculated yield of SSBs by liquid-water track structure exceeded that of gas-phase-water track structure by a factor of 1.2. Received: 13 February 1997 / Accepted in revised form: 26 August 1997     

Effect of vanillin on methylene blue plus light-induced single-strand breaks in plasmid pBR322 DNA

The ability of vanillin (4-hydroxy-3-methoxybenzaldehyde), a naturally occurring food flavouring agent, in inhibiting photosensitization-induced single-strand breaks (ssbs) in plasmid pBR322 DNA has been examined in an in vitro system, independent of DNA repair/replication processes. Photosensitization of DNA with methylene blue, visible light and oxygen, induced ssbs resulting in the production of open circular form (OC form) in a concentration-dependent manner. The yield of OC form induced by photosensitization was increased several-fold by deuteration of the buffer and was found to be inhibited by sodium azide, a scavenger of singlet oxygen (1O(2)). Vanillin, per se, did not induce but inhibited photosensitization-induced ssbs in plasmid DNA, at millimolar concentrations. The inhibitory effect of vanillin was both concentration- and time-dependent. On a molar basis, vanillin was, however, less effective than trolox, a water-soluble analogue of alpha-tocopherol. Photosensitization by methylene blue system generates singlet oxygen, as one of the major components of ROS. Therefore, interaction of singlet oxygen with vanillin was investigated. The rate constant of vanillin with 1O(2) was estimated to be 5.93x10(7)M(-1)s(-1) and that of sodium azide as 2. 7x10(8)M(-1)s(-1). The present investigations show that vanillin can protect against photosensitization-induced ssbs in the plasmid pBR322 DNA, and this effect may partly be due to its ability to scavenge 1O(2).     

Efficient transformation of Serratia marcescens with pBR322 plasmid DNA

Eight Serratia marcescens strains tested could be transformed with the plasmid pBR322. Transformants were selected on the basis of resistance to high levels of ampicillin (400 to 500 micrograms/ml). For six of the strains, the CaCl2- mediated transformation procedure developed for Escherichia coli was successful. For the other two strains, no transformants were obtained with the CaCl2-mediated transformation procedure unless the cells first received a heat treatment. Transformation frequency was dependent on DNA concentration, and no transformation was detected with linear pBR322 DNA. The stability and copy number of pBR322 were similar in S. marcescens and E. coli. As in E. coli, the pBR322 DNA was amplified in S. marcescens after inhibition of proteins synthesis. Based on these results, cloning in S. marcescens should be possible and pBR322 should be a useful cloning vehicle.     

Recombination between bacteriophage lambda and plasmid pBR322 in Escherichia coli

Recombinant lambda phages were isolated that resulted from recombination between the lambda genome and plasmid pBR322 in Escherichia coli, even though these deoxyribonucleic acids (DNAs) did not share extensive regions of homology. The characterization of these recombinant DNAs by heteroduplex analysis and restriction endonucleases is described. All but one of the recombinants appeared to have resulted from reciprocal recombination between a site on lambda DNA and a site on the plasmid. In general, there were two classes of recombinants. One class appeared to have resulted from recombination at the phage attachment site that probably resulted from lambda integration into secondary attachment sites on the plasmid. Seven different secondary attachment sites on pBR322 were found. The other class resulted from plasmid integration at other sites that were widely scattered on the lambda genome. For this second class of recombinants, more than one site on the plasmid could recombine with lambda DNA. Thus, the recombination did not appear to be site specific with respect to lambda or the plasmid. Possible mechanisms for generating these recombinants are discussed.     

Persistence and expression of the plasmid pBR322 inEscherichia coli K12 cultured in complex medium

Summary The stability and gene expression of plasmid pBR322 in a chemostat with complex non-selective medium at different dilution rates were studied. It was observed that pBR322 was eventually lost from the population after a long lag period. The rate of plasmid loss decreases with decreasing dilution rate. This result is different from those obtained with cells grown in defined medium, where plasmid loss was observed to decrease with increasing dilution rate. In addition, it was observed that the -lactamase activity per ml per optical density of cell culture, independent of the dilution rates, increases with time and reaches a maximum around 4.5 units after 100 hrs of continuous culture.