腾冲热海一株栖热菌裂解性噬菌体的分离及其特征

【目的】Thermus(栖热菌)属是嗜热细菌中比较古老的类群,本研究探索从腾冲热海热泉分离栖热菌噬菌体,并初步分析其特征。【方法】采用"双层平板法"从云南腾冲热海碱性热泉中分离纯化栖热菌噬菌体;对噬菌体及其宿主进行电镜形态观察,并进行噬菌体基因组限制性酶切片段多态性分析、噬菌体生理特征及蛋白组成分析。【结果】从腾冲热海热泉分离获得1株裂解性噬菌体,其宿主菌TC10通过16S rRNA基因序列分析鉴定为Thermus属菌株。此噬菌体为长尾型,头部直径67nm,尾管长837nm、宽10nm,最适感染温度为65℃-70℃,最适感染pH值为7.6,对氯仿不敏感,其形态与分离自俄罗斯勘察加半岛热泉的栖热菌噬菌体P23-45和P74-26有一定的差异,蛋白组成差异显著,为一株新的栖热菌噬菌体,命名为TTSP10(Tengchong Thermus Siphoviridae Bacteriophage)。     

Solution structure of a putative ribosome binding protein from Mycoplasma pneumoniae and comparison to a distant homolog

The solution structure of MPN156, a ribosome-binding factor A (RBFA) protein family member from Mycoplasma pneumoniae, is presented. The structure, solved by nuclear magnetic resonance, has a type II KH fold typical of RNA binding proteins. Despite only approximately 20% sequence identity between MPN156 and another family member from Escherichia coli, the two proteins have high structural similarity. The comparison demonstrates that many of the conserved residues correspond to conserved elements in the structures. Compared to a structure based alignment, standard alignment methods based on sequence alone mispair a majority of amino acids in the two proteins. Implications of these discrepancies for sequence based structural modeling are discussed.     

COG3926 and COG5526: a tale of two new lysozyme-like protein families

We have identified two new lysozyme-like protein families by using a combination of sequence similarity searches, domain architecture analysis, and structural predictions. First, the P5 protein from bacteriophage phi8, which belongs to COG3926 and Pfam family DUF847, is predicted to have a new lysozyme-like domain. This assignment is consistent with the lytic function of P5 proteins observed in several related double-stranded RNA bacteriophages. Domain architecture analysis reveals two lysozyme-associated transmembrane modules (LATM1 and LATM2) in a few COG3926/DUF847 members. LATM2 is also present in two proteins containing a peptidoglycan binding domain (PGB) and an N-terminal region that corresponds to COG5526 with uncharacterized function. Second, structure prediction and sequence analysis suggest that COG5526 represents another new lysozyme-like family. Our analysis offers fold and active-site assignments for COG3926/DUF847 and COG5526. The predicted enzymatic activity is consistent with an experimental study on the zliS gene product from Zymomonas mobilis, suggesting that bacterial COG3926/DUF847 members might be activators of macromolecular secretion.     

The catalytic domain of the germination-specific lytic transglycosylase SleB from Bacillus anthracis displays a unique active site topology

Bacillus anthracis produces metabolically inactive spores. Germination of these spores requires germination‐specific lytic enzymes (GSLEs) that degrade the unique cortex peptidoglycan to permit resumption of metabolic activity and outgrowth. We report the first crystal structure of the catalytic domain of a GSLE, SleB. The structure revealed a transglycosylase fold with unique active site topology and permitted identification of the catalytic glutamate residue. Moreover, the structure provided insights into the molecular basis for the specificity of the enzyme for muramic‐δ‐lactam‐containing cortex peptidoglycan. The protein also contains a metal‐binding site that is positioned directly at the entrance of the substrate‐binding cleft. Proteins 2012;. © 2012 Wiley Periodicals, Inc.     

A cofactor-dependent phosphoglycerate mutase homolog from Bacillus stearothermophilus is actually a broad specificity phosphatase

The distribution of phosphoglycerate mutase (PGM) activity in bacteria is complex, with some organisms possessing both a cofactor-dependent and a cofactor-independent PGM and others having only one of these enzymes. Although Bacillus species contain only a cofactor-independent PGM, genes homologous to those encoding cofactor-dependent PGMs have been detected in this group of bacteria, but in at least one case the encoded protein lacks significant PGM activity. Here we apply sequence analysis, molecular modeling, and enzymatic assays to the cofactor-dependent PGM homologs from B. stearothermophilus and B. subtilis, and show that these enzymes are phosphatases with broad substrate specificity. Homologs from other gram-positive bacteria are also likely to possess phosphatase activity. These studies clearly show that the exploration of genomic sequences through three-dimensional modeling is capable of producing useful predictions regarding function. However, significant methodological improvements will be needed before such analysis can be carried out automatically.     

The refined structure of a protein catenane: the HK97 bacteriophage capsid at 3.44 A resolution

The HK97 bacteriophage capsid is a unique example of macromolecular catenanes: interlocked rings of covalently attached protein subunits. The chain mail organization of the subunits stabilizes a particle in which the maximum thickness of the protein shell is 18A and the maximum diameter is 550A. The electron density has the appearance of a balloon illustrating the extraordinary strength conferred by the unique subunit organization. The refined structure shows novel qualities of the HK97 shell protein, gp5 that, together with the protease gp4, guides the assembly and maturation of the virion. Although gp5 forms hexamers and pentamers and the subunits exist in different structural environments, the tertiary structures of the seven protein molecules in the viral asymmetric unit are closely similar. The interactions of the subunits in the shell are exceptionally complex with each subunit interacting with nine other subunits. The interactions of the N-terminus released after gp5 cleavage appear important for organization of the loops that become crosslinked to the core of a neighboring subunit at the maturation. A comparison with a model of the Prohead II structure revealed that the surfaces of non-covalent contact between the monomers that build up hexamers/pentamers are completely redefined during maturation.     

The bacteriophage P1 HumD protein is a functional homolog of the prokaryotic UmuD'-like proteins and facilitates SOS mutagenesis in Escherichia coli

The Escherichia coli umuD and umuC genes comprise an operon and encode proteins that are involved in the mutagenic bypass of normally replication-inhibiting DNA lesions. UmuD is, however, unable to function in this process until it undergoes a RecA-mediated cleavage reaction to generate UmuD'. Many homologs of umuDC have now been identified. Most are located on bacterial chromosomes or on broad-host-range R plasmids. One such putative homolog, humD (homolog of umuD) is, however, found on the bacteriophage P1 genome. Interestingly, humD differs from other umuD homologs in that it encodes a protein similar in size to the posttranslationally generated UmuD' protein and not UmuD, nor is it in an operon with a cognate umuC partner. To determine if HumD is, in fact, a bona fide homolog of the prokaryotic UmuD'-like mutagenesis proteins, we have analyzed the ability of HumD to complement UmuD' functions in vivo as well as examined HumD's physical properties in vitro. When expressed from a high-copy-number plasmid, HumD restored cellular mutagenesis and increased UV survival to normally nonmutable recA430 lexA(Def) and UV-sensitive DeltaumuDC recA718 lexA(Def) strains, respectively. Complementing activity was reduced when HumD was expressed from a low-copy-number plasmid, but this observation is explained by immunoanalysis which indicates that HumD is normally poorly expressed in vivo. In vitro analysis revealed that like UmuD', HumD forms a stable dimer in solution and is able to interact with E. coli UmuC and RecA nucleoprotein filaments. We conclude, therefore, that bacteriophage P1 HumD is a functional homolog of the UmuD'-like proteins, and we speculate as to the reasons why P1 might require the activity of such a protein in vivo.     

Structure determination of a new protein from backbone-centered NMR data and NMR-assisted structure prediction

Targeting of proteins for structure determination in structural genomic programs often includes the use of threading and fold recognition methods to exclude proteins belonging to well-populated fold families, but such methods can still fail to recognize preexisting folds. The authors illustrate here a method in which limited amounts of structural data are used to improve an initial homology search and the data are subsequently used to produce a structure by data-constrained refinement of an identified structural template. The data used are primarily NMR-based residual dipolar couplings, but they also include additional chemical shift and backbone-nuclear Overhauser effect data. Using this methodology, a backbone structure was efficiently produced for a 10 kDa protein (PF1455) from Pyrococcus furiosus. Its relationship to existing structures and its probable function are discussed.     

The NMR solution structure and function of RPA3313: a putative ribosomal transport protein from Rhodopseudomonas palustris

Protein function elucidation often relies heavily on amino acid sequence analysis and other bioinformatics approaches. The reliance is extended to structure homology modeling for ligand docking and protein–protein interaction mapping. However, sequence analysis of RPA3313 exposes a large, unannotated class of hypothetical proteins mostly from the Rhizobiales order. In the absence of sequence and structure information, further functional elucidation of this class of proteins has been significantly hindered. A high quality NMR structure of RPA3313 reveals that the protein forms a novel split ββαβ fold with a conserved ligand binding pocket between the first β‐strand and the N‐terminus of the α‐helix. Conserved residue analysis and protein–protein interaction prediction analyses reveal multiple protein binding sites and conserved functional residues. Results of a mass spectrometry proteomic analysis strongly point toward interaction with the ribosome and its subunits. The combined structural and proteomic analyses suggest that RPA3313 by itself or in a larger complex may assist in the transportation of substrates to or from the ribosome for further processing. Proteins 2016; 85:93–102. © 2016 Wiley Periodicals, Inc.     

The rational designed antagonist derived from the complex structure of interleukin-6 and its receptor affectively blocking interleukin-6 might be a promising treatment in multiple myeloma

Human interleukin-6 is involved in the maintenance and progression of several diseases such as multiple myeloma (MM), rheumatoid arthritis, or osteoporosis. Our previous work demonstrated that an interleukin-6 antagonist peptide (named PT) possessed potential bioactivity to antagonize the function of hIL-6 and could efficiently induce the growth arrest and apoptosis of XG-7 and M1 cells in a dose-dependent manner. In this study, the theoretical interaction of the peptide PT with its receptor was analyzed further more with molecular docking and molecular dynamics methods. The theoretical studies showed that PT possessed very high affinity to interleukin-6R and offered a practical means of imposing long-term blockade of interleukin-6 activity in vivo. According to the theoretical results, the biological evaluation of PT was researched on two different cells models with more sensitive approaches: (1) The antagonist activity of PT was studied on the interleukin-6 dependent MM cells (XG-7) cultured with interleukin-6. In the other interleukin-6 dependent MM cells (SKO-007), they survived themselves by auto/paracrine without the exogenous interleukin-6, and also could be antagonized by PT. The therapeutic value of PT only limited on the interleukin-6 dependent category in MM. (2) Myeloid leukemia M1 cells were induced for growth arrest and apoptosis in response to interleukin-6. The results supported our previous findings and showed that PT could be evaluated by protecting the cells from interleukin-6 induced apoptosis. In conclusion, PT could induce interleukin-6-dependent XG-7 and SKO-007 cells to apoptosis while inhibit interleukin-6-stimulated apoptosis in M1 cells.     

Arg is essential for catalytic activity of 3-hydroxybenzoate 6-hydroxylase from Klebsiella pneumoniae M5a1

3-Hydroxybenzoate 6-hydroxylase from Klebsiella pneumoniae M5a1 is an enzyme that utilizes 3-hydroxybenzoate (3-HBA) as substrate yielding gentisate. Site-directed mutagenesis was carried out to define which residues may be involved in catalytic reaction. Substitution of arginine to glutamate at position 169 of the enzyme resulted in the complete loss of catalytic activity. This indicated Arg169 may play an important role in 3-HBA 6-hydroxylase catalysis.     

The HI0073/HI0074 protein pair from Haemophilus influenzae is a member of a new nucleotidyltransferase family: structure,sequence analyses,and solution studies

The crystal structure of HI0074 from Haemophilus influenzae, a protein of unknown function, has been determined at a resolution of 2.4 A. The molecules form an up-down, four-helix bundle, and associate into homodimers. The fold is most closely related to the substrate-binding domain of KNTase, yet the amino acid sequences of the two proteins exhibit no significant homology. Sequence analyses of completely and incompletely sequenced genomes reveal that the two adjacent genes, HI0074 and HI0073, and their close relatives comprise a new family of nucleotidyltransferases, with 15 members at the time of writing. The analyses also indicate that this is one of eight families of a large nucleotidyltransferase superfamily, whose members were identified based on the proximity of the nucleotide- and substrate-binding domains on the respective genomes. Both HI0073 and HI0074 were annotated "hypothetical" in the original genome sequencing publication. HI0073 was cloned, expressed, and purified, and was shown to form a complex with HI0074 by polyacrylamide gel electrophoresis under nondenaturing conditions, analytic size exclusion chromatography, and dynamic light scattering. Double- and single-stranded DNA binding assays showed no evidence of DNA binding to HI0074 or to HI0073/HI0074 complex despite the suggestive shape of the putative binding cleft formed by the HI0074 dimer.     

Constitutive expression of a meiotic recombination protein gene homolog, OsTOP6A1, from rice confers abiotic stress tolerance in transgenic Arabidopsis plants

Plant productivity is greatly influenced by various environmental stresses, such as high salinity and drought. Earlier, we reported the isolation of topoisomerase 6 homologs from rice and showed that over expression of OsTOP6A3 and OsTOP6B confers abiotic stress tolerance in transgenic Arabidopsis plants. In this study, we have assessed the function of nuclear-localized topoisomerase 6 subunit A homolog, OsTOP6A1, in transgenic Arabidopsis plants. The over expression of OsTOP6A1 in transgenic Arabidopsis plants driven by cauliflower mosaic virus-35S promoter resulted in pleiotropic effects on plant growth and development. The transgenic Arabidopsis plants showed reduced sensitivity to stress hormone, abscisic acid (ABA), and tolerance to high salinity and dehydration at the seed germination; seedling and adult stages as reflected by the percentage of germination, fresh weight of seedlings and leaf senescence assay, respectively. Concomitantly, the expression of many stress-responsive genes was enhanced under various stress conditions in transgenic Arabidopsis plants. Moreover, microarray analysis revealed that the expression of a large number of genes involved in various processes of plant growth and development and stress responses was altered in transgenic plants. Although AtSPO11-1, the homolog of OsTOP6A1 in Arabidopsis, has been implicated in meiotic recombination; the present study demonstrates possible additional role of OsTOP6A1 and provides an effective tool for engineering crop plants for tolerance to different environmental stresses. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The part of a long beta hairpin from the scrapie form of the human prion protein is reconstructed in the synthetic CC36 protein

Mechanisms of beta sheet formation by the human prion protein are not clear yet. In this work, we clarified the role of the region containing C‐half of the second helix and N‐half of the third helix of that protein in the process of alpha helix to beta sheet transition. Solid phase automatic synthesis of the original peptide (CC36: Cys179–Cys214) failed because of the beta hairpin formation in the region 206‐MERVVEQMC‐214 with a high beta strand potential. Using Met206Arg and Val210Arg substitutions, we increased the probability of alpha helix formation by that sequence. After that modification, the complete CC36 peptide with disulfide bond has been synthesized. Modified peptide has been studied by circular dichroism (CD) and fluorescence spectrography. According to the CD spectra analysis, the CC36 peptide contains 37% of residues in beta sheet and just 15% in helix. Thermal analysis under the control of CD shows that the secondary structure content of the peptide is stable from 5°C to 80°C. Dissociation of oligomers of the CC36 peptide finishes at 37°C according to the fluorescence analysis. The CC36 peptide is able to bind Mn²⁺ cations, which causes small temperature‐associated structural shifts at concentrations of 2 – 10·10^?6 M. Predicted beta hairpin of the CC36 peptide (two beta strands are: 184‐IKQHTVT‐190 and 197‐TETDVKM‐205) should be the part of a longer beta hairpin from the scrapie form of the prion protein (PrPSc). Analogs of the CC36 peptide may be considered as antigens for the future development of a vaccine against PrPSc. Proteins 2016; 84:1462–1479. © 2016 Wiley Periodicals, Inc.     

The crystal structure of the bacteriophage PSA endolysin reveals a unique fold responsible for specific recognition of Listeria cell walls

Bacteriophage murein hydrolases exhibit high specificity towards the cell walls of their host bacteria. This specificity is mostly provided by a structurally well defined cell wall-binding domain that attaches the enzyme to its solid substrate. To gain deeper insight into this mechanism we have crystallized the complete 314 amino acid endolysin from the temperate Listeria monocytogenes phage PSA. The crystal structure of PlyPSA was determined by single wavelength anomalous dispersion methods and refined to 1.8 A resolution. The two functional domains of the polypeptide, providing cell wall-binding and enzymatic activities, can be clearly distinguished and are connected via a linker segment of six amino acid residues. The core of the N-acetylmuramoyl-L-alanine amidase moiety is formed by a twisted, six-stranded beta-sheet flanked by six helices. Although the catalytic domain is unique among the known Listeria phage endolysins, its structure is highly similar to known phosphorylase/hydrolase-like alpha/beta-proteins, including an autolysin amidase from Paenibacillus polymyxa. In contrast, the C-terminal domain of PlyPSA features a novel fold, comprising two copies of a beta-barrel-like motif, which are held together by means of swapped beta-strands. The architecture of the enzyme with its two separate domains explains its unique substrate recognition properties and also provides insight into the lytic mechanisms of related Listeria phage endolysins, a class of enzymes that bear biotechnological potential.     

The Cell Shape-determining Csd6 Protein from Helicobacter pylori Constitutes a New Family of l,d-Carboxypeptidase

Helicobacter pylori causes gastrointestinal diseases, including gastric cancer. Its high motility in the viscous gastric mucosa facilitates colonization of the human stomach and depends on the helical cell shape and the flagella. In H. pylori, Csd6 is one of the cell shape-determining proteins that play key roles in alteration of cross-linking or by trimming of peptidoglycan muropeptides. Csd6 is also involved in deglycosylation of the flagellar protein FlaA. To better understand its function, biochemical, biophysical, and structural characterizations were carried out. We show that Csd6 has a three-domain architecture and exists as a dimer in solution. The N-terminal domain plays a key role in dimerization. The middle catalytic domain resembles those of l,d-transpeptidases, but its pocket-shaped active site is uniquely defined by the four loops I to IV, among which loops I and III show the most distinct variations from the known l,d-transpeptidases. Mass analyses confirm that Csd6 functions only as an l,d-carboxypeptidase and not as an l,d-transpeptidase. The d-Ala-complexed structure suggests possible binding modes of both the substrate and product to the catalytic domain. The C-terminal nuclear transport factor 2-like domain possesses a deep pocket for possible binding of pseudaminic acid, and in silico docking supports its role in deglycosylation of flagellin. On the basis of these findings, it is proposed that H. pylori Csd6 and its homologs constitute a new family of l,d-carboxypeptidase. This work provides insights into the function of Csd6 in regulating the helical cell shape and motility of H. pylori.     

Antimicrobial activity of recombinant Pg-AMP1, a glycine-rich peptide from guava seeds

Antimicrobial peptides (AMPs) are compounds that act in a wide range of physiological defensive mechanisms developed to counteract bacteria, fungi, parasites and viruses. These molecules have become increasingly important as a consequence of remarkable microorganism resistance to common antibiotics. This report shows Escherichia coli expressing the recombinant antimicrobial peptide Pg-AMP1 previously isolated from Psidium guajava seeds. The deduced Pg-AMP1 open reading frame consists in a 168bp long plus methionine also containing a His6 tag, encoding a predicted 62 amino acid residue peptide with related molecular mass calculated to be 6.98kDa as a monomer and 13.96kDa at the dimer form. The recombinant Pg-AMP1 peptide showed inhibitory activity against multiple Gram-negative (E. coli, Klebsiella pneumonia and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus and Staphylococcus epidermides) bacteria. Moreover, theoretical structure analyses were performed in order to understand the functional differences between natural and recombinant Pg-AMP1 forms. Data here reported suggest that Pg-AMP1 is a promising peptide to be used as a biotechnological tool for control of human infectious diseases.