Important factors for testing barrier materials with surrogate viruses.

This study evaluated bacteriophages phi X174, T7, PRD1, and phi 6 as possible surrogates for pathogenic human viruses to challenge barrier materials and demonstrated some important factors for their use. Chemical incompatibility with test material was demonstrated when lipid-enveloped phi 6 was inactivated by an aqueous eluate of vinyl gloves, but 0.5% calf serum protected phi 6 from the eluate. Low concentrations (2%) of calf serum also prevented the exaggerated binding of the bacteriophages to filters. Recovery of viruses from surfaces decreased with increasing time before recovery. Penetration through punctures displayed different types of kinetics. The combined data indicate that (i) some bacteriophages may serve as surrogate viruses, (ii) experimental conditions determine whether a particular virus is appropriate as a challenge, and (iii) phi X174 is an excellent choice as a surrogate virus to test barrier materials. The data further indicate that before barrier materials are challenged with viruses, adequate tests should be performed to ensure that the virus is compatible with the test material and test conditions, so that meaningful data will result.     

Minimized virus binding for tests of barrier materials.

Viruses are used to test the barrier properties of materials. Binding of virus particles during passage through holes in the material may yield misleading test results. The choices of challenge virus and suspending medium may be important for minimizing confounding effects that might arise from such binding. In this study, different surrogate viruses, as well as different support media, were evaluated to determine optimal test parameters. Two membranes with high-binding properties (nitrocellulose and cationic polysulfone) were used as filters to compare binding activities of different surrogate challenge viruses (MS2, phi X174, T7, PRD1, and phi 6) in different media. The media consisted of buffered saline with surfactants, serum, or culture broth as additives. In addition, elution rates of viruses that bound to the membranes were determined. The results suggest that viruses can bind by hydrophobic and electrostatic interactions, with phi X174 displaying the lowest level of binding by either process. The nonionic detergents Triton X-100 and Tween 80 (0.1%) equally minimized hydrophobic interactions. Neither anionic nor cationic surfactants were as effective at nontoxic levels. Serum was effective at reducing both hydrophobic and electrostatic binding, with 2% being sufficient for eliminating binding under our test conditions. Thus, phi X174 remains the best choice as a surrogate virus to test barrier materials, and Triton X-100 (0.1%) remains a good choice for reducing hydrophobic binding. In addition, binding of viruses by barrier materials is unlikely to prevent passage of blood-borne pathogens.     

Filtration sizes of human immunodeficiency virus type 1 and surrogate viruses used to test barrier materials.

Filters with well-defined holes were used to determine the effective diameters in buffer of human immunodeficiency virus type 1, herpes simplex virus type 1, and four bacteriophages (phi X174, T7, PRD1, and phi 6), which may serve as surrogate viruses for testing barrier materials. Bacteriophages phi 6 and PRD1 most closely model human immunodeficiency virus type 1 in filtration size.     

Filtration sizes of human immunodeficiency virus type 1 and surrogate viruses used to test barrier materials.

Filters with well-defined holes were used to determine the effective diameters in buffer of human immunodeficiency virus type 1, herpes simplex virus type 1, and four bacteriophages (phi X174, T7, PRD1, and phi 6), which may serve as surrogate viruses for testing barrier materials. Bacteriophages phi 6 and PRD1 most closely model human immunodeficiency virus type 1 in filtration size.     

Dye to use with virus challenge for testing barrier materials

Can FD&C Blue no. 1 dye photoinactivate bacteriophages phi X174, T7, PRD1, and phi 6 under laboratory lighting conditions? At high levels of light, the dye (500 microM) photoinactivated only phi 6. Thus, this dye can be used at concentrations up to 500 microM with bacteriophages phi X174, T7, and PRD1 to test barrier material integrity.     

Dye to use with virus challenge for testing barrier materials.

Can FD&C Blue no. 1 dye photoinactivate bacteriophages phi X174, T7, PRD1, and phi 6 under laboratory lighting conditions? At high levels of light, the dye (500 microM) photoinactivated only phi 6. Thus, this dye can be used at concentrations up to 500 microM with bacteriophages phi X174, T7, and PRD1 to test barrier material integrity.     

Delineating the Specific Influence of Virus Isoelectric Point and Size on Virus Adsorption and Transport through Sandy Soils

Many of the factors controlling viral transport and survival within the subsurface are still poorly understood. In order to identify the precise influence of viral isoelectric point on viral adsorption onto aquifer sediment material, we employed five different spherical bacteriophages (MS2, PRD1, Qβ, X174, and PM2) having differing isoelectric points (pI 3.9, 4.2, 5.3, 6.6, and 7.3 respectively) in laboratory viral transport studies. We employed conventional batch flowthrough columns, as well as a novel continuously recirculating column, in these studies. In a 0.78-m batch flowthrough column, the smaller phages (MS2, X174, and Qβ), which had similar diameters, exhibited maximum effluent concentration/initial concentration values that correlated exactly with their isoelectric points. In the continuously recirculating column, viral adsorption was negatively correlated with the isoelectric points of the viruses. A model of virus migration in the soil columns was created by using a one-dimensional transport model in which kinetic sorption was used. The data suggest that the isoelectric point of a virus is the predetermining factor controlling viral adsorption within aquifers. The data also suggest that when virus particles are more than 60 nm in diameter, viral dimensions become the overriding factor.     

Role of the Air-Water-Solid Interface in Bacteriophage Sorption Experiments

Batch sorption experiments were carried out with the bacteriophages MS2 and X174. Two types of reactor vessels, polypropylene and glass, were used. Consistently lower concentrations of MS2 were found in the liquid phase in the absence of soil (control blanks) than in the presence of soil after mixing. High levels of MS2 inactivation (~99.9%) were observed in control tubes made of polypropylene (PP), with comparatively little loss of virus seen in PP tubes when soil was present. Minimal inactivation of MS2 was observed when the air-water interface was completely eliminated from PP control blanks during mixing. All batch experiments performed with reactor tubes made of glass demonstrated no substantial inactivation of MS2. In similar experiments, bacteriophage X174 did not undergo inactivation in either PP or glass control blanks, implying that this virus is not affected by the same factors which led to inactivation of MS2 in the PP control tubes. When possible, phage adsorption to soil was calculated by the Freundlich isotherm. Our data suggest that forces associated with the air-water-solid interface (where the solid is a hydrophobic surface) are responsible for inactivation of MS2 in the PP control tubes. The influence of air-water interfacial forces should be carefully considered when batch sorption experiments are conducted with certain viruses.     

Photochemical stability of aromatic amino acids under picosecond laser UV-irradiation

Two-step photochemical decomposition of aromatic amino acids under picosecond laser UV-irradiation was investigated. These results were compared with the photochemical stability of nucleic acid bases. Using the known ratio between the nucleic acid bases and aromatic amino acids in native bacteriophages lambda and phi X174 it was shown that picosecond laser UV-inactivation of viruses occurred due to the photodegradation of nucleic acid.     

Virus inactivation by copper or iron ions alone and in the presence of peroxide.

Cupric and ferric ions were able to inactivate five enveloped or nonenveloped, single- or double-stranded DNA or RNA viruses. The virucidal effect of these metals was enhanced by the addition of peroxide, particularly for copper(II). Under the conditions of our test, mixtures of copper(II) ions and peroxide were more efficient than glutaraldehyde in inactivating phi X174, T7, phi 6, Junin, and herpes simplex viruses. The substances described here should be able to inactivate most, if not all, viruses that have been found contaminating medical devices.     

Nucleotide sequences at the phi X gene A protein cleavage site in replicative form I DNAs of bacteriophages U3, G14, and alpha 3

Gene A protein, a bacteriophage phi X174-encoded endonuclease involved in phi X replicative form (RF) DNA replication, nicks not only phi X RFI DNA but also RFI DNAs of several other spherical single-stranded DNA bacteriophages. The position of the phi X gene A protein nick and the nucleotide sequence surrounding this site in RF DNAs of the bacteriophages U3, G14, and alpha 3 were determined. Comparison of the nucleotide sequences which surround the nick site of the gene A protein in RF DNAs of phi X174, G4, St-1, U3, G14, and alpha 3 revealed that a strongly conserved 30-nucleotide stretch occurred in RF DNAs of all six phages. However, perfect DNA sequence homology around this site was only 10 nucleotides, the decamer sequence CAACTTGATA. The present results support the hypothesis that, for nicking of double-stranded supercoiled DNA by the phi X gene A protein, the presence of the recognition sequence CAACTTGATA and a specific gene A protein binding sequence upstream from the recognition sequence are required. The sequence data obtained so far from phages U3, G14, St-1, and alpha 3 have been compared with the nucleotide sequences and amino acid sequences of both phi X and G4. According to this comparison, the evolutionary relationship between phages G4, U3, and G14 is very close, which also holds for phages alpha 3 and St-1. However, the two groups are only distantly related, both to each other and to phi X.     

Differential survival and chloramphenicol-insensitive error-prone repair of hydroxylamine-inactivated phi X174 bacteriophage mutants

Features of inactivation, repair and concomitant mutagenesis of hydroxylamine-treated phi X174 bacteriophages are reported here. (1) For reasons unknown, the nonsense phage mutants tested here were far more sensitive to hydroxylamine than the wild-type phage. In contrast, the sensitivities of these same phi X174 mutants to UV-irradiation are indistinguishable. (2) Hydroxylamine-treated amber phages mutated to ochre but not to wild-type particles, i.e., G leads to A transition events were recovered. (3) The repair of phi X174 phages from hydroxylamine-induced damage was error-prone, but unlike UV damage, did not require protein synthesis de novo. Possible mechanisms of these novel features are discussed.     

Three new restriction endonucleases MaeI, MaeII and MaeIII from Methanococcus aeolicus

Three type II restriction endonucleases, MaeI, MaeII and MaeIII, with novel site specificities have been isolated and purified from the archaebacterium Methanococcus aeolicus PL-15/H. The recognition sequences of these enzymes are (formula: see text) with the sites of cleavage as indicated by the arrows. The sequences were confirmed by restriction and computer analyses on sequenced DNA's of plasmid pBR322, bacteriophages lambda and phi X174 and virus SV40.     

Studies of the recognition sequence of phi X174 gene A protein. Cleavage site of phi X gene A protein in St-1 RFI DNA.

It is already known that phi X gene A protein converts besides phi X RFI DNA also the RFI DNAs of the single-stranded bacteriophages G4, St-1, alpha 3 and phi K into RFII DNA. We have extended this observations for bacteriophages G14 and U3. Restriction enzyme analysis placed the phi X gene A protein cleavage site in St-1 RF DNA in the HinfI restriction DNA fragment F10 and in the overlapping HaeIII restriction DNA fragment Z7. The exact position and the nucleotide sequence at the 3'-OH end of the nick were determined by DNA sequence analysis of the single-stranded DNA subfragment of the nicked DNA fragment F10 obtained by gelelectrophoresis in denaturing conditions. A stretch of 85 nucleotides of St-1 DNA around the position of the phi X gene A protein cleavage site was established by DNA sequence analysis of the restriction DNA fragment Z7F1. Comparison of this nucleotide sequence with the previously determined nucleotide sequence around the cleavage site of phi X gene A protein in phi X174 RF DNA and G4 RF DNA revealed an identical sequence of only 10 nucleotides. The results suggest that the recognition sequence of the phi X174 gene A protein lies within these 10 nucleotides.     

Structure of simian virus 40-phiX174 recombinant genomes isolated from single cells.

Three simian virus (SV40)-phi X174 recombinant genomes were isolated from single BSC-1 monkey cells cotransfected with SV40 and phi X174 RF1 DNAs. The individual cell progenies were amplified, cloned, and mapped by a combination of restriction endonuclease and heteroduplex analyses. In each case, the 600 to 1,000 base pairs of phi X174 DNA (derived from different regions of the phi X174 genome) were present as single inserts, located in either the early or late SV40 regions; the deletion of SV40 DNA was greater than the size of the insert; and the remaining portions of the hybrid genome were indistinguishable from wild-type SV40 DNA, as judged by both mapping and biological tests. Hence, apart from the deletion which accommodates the phi X174 DNA insert, no other rearrangements of SV40 DNA were detected. The restriction map of a SV40-phi X174 recombinant DNA isolate before molecular cloning was indistinguishable from those of two separate cloned derivatives of that isolate, indicating that the species cloned was the major amplifiable recombinant structure generated by a single recombinant-producing cell. The relative simplicity of the SV40-phi X174 recombinant DNA examined is consistent with the notion that most recombinant-producing BSC-1 cells support single recombination events generating only one amplifiable recombinant structure.     

Enumeration and isolation of viral particles from oligotrophic marine environments by tangential flow filtration.

A method for concentrating, enumerating and isolating viral particles from marine water samples was developed and evaluated. The method consists of a concentration step by a tangential flow filtration (TFF) system, ultrafiltration by centrifugal concentrator, and visualization by transmission electron microscopy (TEM). This procedure allows to reduce volumes of ca. 21 of seawater to 10-20 microliters, which can be dispensed on electron microscopy grids to count total viral particles. This method allows the recovery of small numbers of viral particles from oligotrophic seawater samples, in which viral numbers ranged from 10(5) to 10(6) viral particles/ml. The tangential flow filtration system was evaluated as quantitative technique using suspensions of two different bacteriophages (T6 and phi X174) in autoclaved seawater. Recovery rates varied depending on both the viral morphology and flow rate; recovery percentages reached 117.4% for T6 and 60.6% for phi X174 using low flow rate.     

Second-step concentration of viruses in drinking and surface waters using polyethylene glycol hydroextraction.

In our laboratory, virus adsorbed to talc--Celite layers is eluted with 100 mL of 10% fetal calf serum (FCS) in normal saline (pH 9.0). A further 10-fold reduction in the volume of the eluate was necessary before its inoculation into cell cultures. A 100-mL volume of an experimentally contaminated sample was placed in a dialysis sac and hydroextracted overnight (4 degrees C) with polyethylene glycol (PEG) 6000. The viscous material remaining in the sac was resuspended in 10 mL of Earle's balanced salt solution. After membrane filtration (0.2 micron), the concentrate was plaque assayed in BS-C-1 cells. Using this technique, recoveries of five laboratory-adapted enteric viruses (polio 1, echo 6, coxsackie B5, coxackie A9, and reo 3) and four freshly isolated enteric virus strains (polio 1, echo 1, coxsackie B3, and reo) ranged from 87 to 97%. In comparative tests, PEG hydroextraction was simpler and superior to organic flocculation.     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.