Plasmid DNA transfection using magnetite cationic liposomes for construction of multilayered gene-engineered cell sheet

Modification of cellular functions by overexpression of genes is being increasingly practiced for tissue engineering. In the present study, we investigated whether transfection efficiency could be enhanced by magnetofection that involves the use of plasmid DNA (pDNA)/magnetite cationic liposomes (MCLs) complexes (pDNA/MCL) and magnetic force. The transfection efficiencies of the magnetofection technique by pDNA/MCL in fibroblasts and keratinocytes using reporter genes were 36- and 10-fold higher, respectively, than those of a lipofection technique by cationic liposomes. Moreover, in vitro construction of three-dimensional (3D) tissues is an important challenge. We recently proposed a novel technique termed "magnetic force-based tissue engineering" (Mag-TE) to produce 3D tissues. Since the fibroblasts after magnetofection incorporated both magnetite nanoparticles and pDNA, we investigated whether multilayered heterotypic cell sheets expressing transgene could be fabricated by Mag-TE. First, the fibroblasts were seeded onto an ultra-low attachment culture plate. When a magnet was placed under the plate, the cells accumulated at the bottom of the culture plate. After 24 h of culture, the transgene-expressing cells formed a multilayered cell sheet-like structure. These results indicated that MCLs are a potent biomanipulation tool for both gene transfer and 3D tissue construction, suggesting that these techniques are useful for tissue engineering.     

Cell patterning using magnetite nanoparticles and magnetic force

Technologies for fabricating functional tissue architectures by patterning cells precisely are highly desirable for tissue engineering. Although several cell patterning methods such as microcontact printing and lithography have been developed, these methods require specialized surfaces to be used as substrates, the fabrication of which is time consuming. In the present study, we demonstrated a simple and rapid cell patterning technique, using magnetite nanoparticles and magnetic force, which enables us to allocate cells on arbitrary surfaces. Magnetite cationic liposomes (MCLs) developed in our previous study were used to magnetically label the target cells. When steel plates placed on a magnet were positioned under a cell culture surface, the magnetically labeled cells lined on the surface where the steel plate was positioned. Patterned lines of single cells were achieved by adjusting the number of cells seeded, and complex cell patterns (curved, parallel, or crossing patterns) were successfully fabricated. Since cell patterning using magnetic force may not limit the property of culture surfaces, human umbilical vein endothelial cells (HUVECs) were patterned on Matrigel, thereby forming patterned capillaries. These results suggest that the novel cell patterning methodology, which uses MCLs, is a promising approach for tissue engineering and studying cell-cell interactions in vitro.     

Colocalization of NO and VIP in neurons of the submucous plexus in the rat intestine

Since very few previous studies have carried out the quantitative analysis for the colocalization of nitric oxide (NO) and vasoactive intestinal peptide (VIP) in the submucous neurons in the rat digestive tract, we applied in vivo treatment of colchicine to enhance the immunoreactivity and examined the colocalization of NO synthase (nNOS) and VIP in neurons of the submucous plexus throughout the rat digestive tract. The density of nNOS-containing neurons in the submucous plexus in the stomach corpus (103±25 cells/cm², n=3) and that in the antrum (157±9 cells/cm², n=3) were significantly lower than those in small and large intestine. However no difference was detected in the cell density among duodenum (1967±188 cells/cm², n=3), jejunum (2640±140 cells/cm², n=3), ileum (2070±42 cells/cm², n=3), proximal colon (2243±138 cells/cm², n=3) and distal colon (2633±376 cells/cm², n=3). The proportion of nNOS-immunoreactive (IR), nNOS/VIP-IR and VIP-IR neurons to the total number of submucous neurons was examined. nNOS/VIP-IR neurons comprised 45–55% of total number of submucous neurons from the duodenum to the proximal colon, however those comprised 66.4±5.1% in the distal colon. The results showed that the dense distribution of nNOS-containing neurons was found in the submucous plexus throughout the small and large intestine, and large population of submucous neurons co-stored nNOS and VIP.     

Human fibroblast culture on a crosslinked dermal porcine collagen matrix

The use of a novel porcine-derived collagen biomaterial as a dermal tissue engineering matrix was examined. The matrix is derived from porcine dermis, and is processed to retain the native collagen (Type 1) and elastin structure. Human primary fibroblasts were cultured on the matrix to examine its potential for creating a dermal replacement. Attachment of fibroblasts on the collagen was compared to tissue culture plastic and PET membranes. Cell proliferation was assessed using the MTT assay and DAPI staining. For seeding densities of 5×10⁴ and 1×10⁵ cells cm⁻², PET and plastic demonstrated >95% attachment of seeded numbers after 3 h. The collagen matrix reached levels >80% after 3–4 h with no influence of the seeding density. Matrix samples with perforating pores of 40 μm diameter were also studied. After 216 h culture in static culture, with media replacement every 3 days, the final cell numbers reached 2.1×10⁵ (perforated) and 2.0×10⁵ cells cm⁻² (unperforated). In comparison fibroblast culture in a perfusion bioreactor, with continuous media replacement, reached 2.3×10⁵ (unperforated) and 2.5×10⁵ cells cm⁻² (perforated) after 216 h.     

Haematopoietic lineage-committed bone marrow cells, but not cloned cultured mesenchymal stem cells, contribute to regeneration of renal tubular epithelium after HgCl 2 -induced acute tubular injury

Abstract.   Objective : Our previous studies have demonstrated that endogenous bone marrow cells (BMCs) contribute to renal tubular regeneration after acute tubular injury. The aim of this study was to examine which fraction of BMCs, haematopoietic lineage marrow cells (HLMCs) or mesenchymal stem cells (MSCs), are effective. Materials and methods : Six-week-old female mice were lethally irradiated and were transplanted with female enhanced green fluorescent protein-positive (GFP⁺), plastic non-adherent marrow cells (as a source of HLMCs) plus cloned cultured male GFP⁻ MSCs. Four weeks later, they were assigned into two groups: control mice with vehicle treatment and mice treated with HgCl₂. Tritiated thymidine was given 1 h before animal killing which occurred at intervals over 2 weeks. Kidney sections were stained for a tubular epithelial marker, cell origin indicated by GFP immunohistochemistry or Y chromosome in situ hybridization; periodic acid-Schiff staining was performed, and samples were subjected to autoradiography. One thousand consecutive renal tubular epithelial cells per mouse, in S phase, were scored as either female (indigenous) GFP⁺ (HLMC-derived) or male (MSC-derived). Results : Haematopoietic lineage marrow cells and MSCs stably engrafted into bone marrow and spleen, but only HLMC-derived cells, not MSCs, were found in the renal tubules and were able to undergo DNA synthesis after acute renal injury. A few MSCs were detected in the renal interstitium, but their importance needs to be further explored. Conclusion : Haematopoietic lineage marrow cells, but not cloned cultured MSCs, can play a role not only in normal wear-and-tear turnover of renal tubular cells, but also in repair after tubular injury.     

Photodynamic damages induced by a monocationic porphyrin derivative in a human carcinoma cell line

The photokilling activity of 5-(4-trimethylammoniumphenyl)-10,15,20-tris(2,4,6-trimethoxyphenyl)porphyrin (CP) was evaluated on a Hep-2 human larynx-carcinoma cell line. Cell treatment was carried out with 5 μM CP incorporated into liposomal vesicles. Under violet-blue exciting light, the red fluorescence of CP was mainly detected as a filamentous pattern characteristic of mitochondrial localization. Similar pattern was also observed using rhodamine 123 in Hep-2 cells. No dark cytotoxicity was observed using 5 μM CP concentration and long incubation time (24 h). Using Hoechst-33258 and caspase-3 immunostaining methods, cell cultures treated for 24 h with CP and exposed to light for 7.5 min (27 J/cm²) showed a great amount of apoptotic cells (40%). In contrast, necrotic cells (58%) were observed using the same drug concentration but irradiated for 15 min (54 J/cm²). The results show that CP can induce different mechanisms of cell death depending on irradiation doses in the photodynamic treatments, which makes this agent an interesting sensitizer with potential application in photodynamic tumor therapy.     

利用微载体悬浮培养人脐带间充质干细胞

随着干细胞研究的不断深入,干细胞功能分化研究和临床应用转化的需求日益提升。人脐带间充质干细胞(human umbilical cord mesenchymal stem cells, hUCMSCs)来源广泛,不仅自我更新能力强、能够分化成多种类型的成体细胞,而且其自身具有免疫调节能力,不易引发免疫排斥反应,在干细胞功能分化研究和临床应用中具有巨大应用前景和应用潜力。目前,传统的细胞培养方式培养效率低、细胞活性较差,不能满足日益增长的研究和应用需求。本研究利用微载体结合旋转瓶的悬浮培养方法,通过优化细胞接种量及转速等影响因素,快速获得大量高质量的人脐带间充质干细胞。经悬浮培养总细胞量可高达到7×10 ⁸个细胞/L,而且细胞活性较高,MSC 特异性标记物表达良好,在恢复平面培养后仍能维持MSC的正常细胞形态和增殖能力。高效脐带间充质干细胞悬浮培养体系的初步建立,为未来的干细胞功能分化研究和临床应用奠定了基础。     

Multipotent mesenchymal stem cells from adult human eye conjunctiva stromal cells

Abstract Identification of mesenchymal stem cells (MSCs) derived from alternative sources has provided an exciting prospect for intensive investigation. This work focused on characterizing a new source of MSCs from stromal cells from human eye conjunctiva. In this study, after conjunctiva biopsies and culture of stromal segment of this tissue, fibroblast-like (SH2⁺, SH3⁺, CD29⁺, CD44⁺, CD166⁺, CD13⁺) human stromal cells, which can be differentiated toward the osteogenic, adipogenic, chondrogenic, and neurogenic lineages, were obtained. These cells expressed Oct-4, Nanog, Rex-1 genes, and some lineage-specific markers like cardiac actin and Keratin. Taken together, the results indicate that conjunctiva stromal-derived cells are a new source of multipotent MSCs and despite originating from an adult source, they express undifferentiated stem cell markers.     

Ovicidal and adulticidal activities of Cinnamomum zeylanicum bark essential oil compounds and related compounds against Pediculus humanus capitis (Anoplura: Pediculicidae)

The toxicity of cinnamon, Cinnamomum zeylanicum, bark essential oil compounds against eggs and adult females of human head louse, Pediculus humanus capitis, was examined using direct contact and vapour phase toxicity bioassays and compared with the lethal activity of their related compounds, benzyl alcohol, cinnamic acid, cinnamyl acetate, 4-hydroxybenzaldehyde and salicylaldehyde, as well as two widely used pediculicides, d-phenothrin and pyrethrum. In a filter-paper contact toxicity bioassay with female lice at 0.25 mg/cm², benzaldehyde was 29- and 27-fold more toxic than pyrethrum and d-phenothrin, respectively, as judged by median lethal time (LT₅₀) values. Salicylaldehyde was nine and eight times more active than pyrethrum and d-phenothrin, respectively. Pediculicidal activity of linalool was comparable with that of d-phenothrin and pyrethrum. Cinnamomum bark essential oil was slightly less effective than either d-phenothrin or pyrethrum. Benzyl alcohol and (E)-cinnamaldehyde exhibited moderate pediculicidal activity. After 24 h of exposure, no hatching was observed with 0.063 mg/cm² salicylaldehyde, 0.125 mg/cm² benzaldehyde, 0.5 mg/cm² Cinnamomum bark essential oil, 1.0 mg/cm² (E)-cinnamaldehyde, and 1.0 mg/cm² benzyl cinnamate. Little or no ovicidal activity was observed with d-phenothrin or pyrethrum. In vapour phase toxicity tests with female lice, benzaldehyde and salicylaldehyde were much more effective in closed containers than in open ones, indicating that the mode of delivery of these compounds was largely due to action in the vapour phase. Neither d-phenothrin nor pyrethrum exhibited fumigant toxicity. Cinnamomum bark essential oil and test compounds described merit further study as potential pediculicides or ovicides for the control of P. h. capitis.     

Antitumor effects of combined therapy of recombinant heat shock protein 70 and hyperthermia using magnetic nanoparticles in an experimental subcutaneous murine melanoma

Heat shock proteins (HSPs) are recognized as significant participants in cancer immunity. We previously reported that HSP70 expression following hyperthermia using magnetic nanoparticles induces antitumor immunity. In the present study, we examine whether the antitumor immunity induced by hyperthermia is enhanced by administration of recombinant HSP70 protein into the tumor in situ. Hyperthermia was conducted using our original magnetite cationic liposomes (MCLs), which have a positive surface charge and generate heat in an alternating magnetic field (AMF) due to hysteresis loss. MCLs and recombinant mouse HSP70 (rmHSP70) were injected into melanoma nodules in C57BL/6 mice, which were subjected to AMF for 30 min. Temperature within the tumor reached 43°C and was maintained by controlling the magnetic field intensity. The combined treatment strongly inhibited tumor growth over a 30-day period and complete regression of tumors was observed in 20% (2/10) of mice. It was also found that systemic antitumor immunity was induced in the cured mice. This study suggests that novel combined therapy using exogenous HSP70 and hyperthermia has great potential in cancer treatment.     

Photodynamic activity of a new sensitizer derived from porphyrin-C60 dyad and its biological consequences in a human carcinoma cell line

The photokilling activity of a porphyrin-C₆₀ (P-C₆₀) dyad was evaluated on a Hep-2 human larynx-carcinoma cell line. This study represents the first evaluation of a dyad, with high capacity to form a photoinduced charge-separated state, to act as agent to inactivate cells by photodynamic therapy (PDT). Cell treatment was carried out with 1 μM P-C₆₀ incorporated into liposomal vesicles. No dark cytotoxicity was observed using 1 μM P-C₆₀ concentration and during long incubation time (24 h). The uptake of sensitizer into Hep-2 was studied at different times of incubation. Under these conditions, a value of 1.5 nmol/10⁶ cells was found after 4 h of incubation showing practically no change even after 24 h. The cell survival after irradiation of the cells with visible light was dependent upon light exposure level. A high photocytotoxic effect was observed for P-C₆₀, which inactivated 80% of the cells after 54 J/cm² of irradiation. Moreover, the dyad kept a high photoactivity even under argon atmosphere. Thus, depending on the microenviroment where the sensitizer is localized, this compound could produce a biological photodamage through either a ¹O₂-mediated photoreaction process or a free radical mechanism under low oxygen concentration.

The mechanism of cell death was analyzed by Hoechst-33258, toluidine blue staining, TUNEL and DNA fragmentation. Cell cultures treated for 24 h with P-C₆₀ and irradiated with a dose of 54 J/cm² showed a great amount of apoptotic cells (58%). Moreover, changes in cell morphology were analyzed using fluorescence microscopy with Hoechst-33258 under low oxygen concentration. Under this anaerobic condition, necrotic cellular death predominated on apoptotic pathway. There were more apoptotic cells under air irradiation condition than under argon irradiation condition. To determine the apoptotic pathway, caspase-3 activation was studied by caspase-3 activity detection kits. The last results showed that P-C₆₀ induced apoptosis by caspase-3-dependent pathway. These results indicated that molecular dyad, which can form a photoinduced charge-separated state, is a promising model for phototherapeutic agents and they have potential application in cell inactivation by PDT.     

Anatomically shaped osteochondral constructs for articular cartilage repair

Few successful treatment modalities exist for surface-wide, full-thickness lesions of articular cartilage. Functional tissue engineering offers a great potential for the clinical management of such lesions. Our long-term hypothesis is that anatomically shaped tissue constructs of entire articular layers can be engineered in vitro on a bony substrate, for subsequent implantation. To determine the feasibility, this study investigated the development of bilayered scaffolds of chondrocyte-seeded agarose on natural trabecular bone. In a series of three experiments, bovine chondrocytes were seeded in (1) cylindrical bilayered constructs of agarose and bovine trabecular bone, 0.53 cm² in surface area and 3.2 mm thick, and were cultured for up to 6 weeks; (2) chondrocyte-seeded anatomically shaped agarose constructs reproducing the human patellar articular layer (area=11.7 cm², mean THICKNESS=3.4 mm), cultured for up to 6 weeks; and (3) chondrocyte-seeded anatomically shaped agarose constructs of the patella (same as above) integrated into a corresponding anatomically shaped trabecular bone substrate, cultured for up to 2 weeks. Articular layer geometry, previously acquired from human cadaver joints, was used in conjunction with computer-aided design and manufacturing technology to create these anatomically accurate molds. In all experiments, chondrocytes remained viable over the entire culture period, with the agarose maintaining its shape while remaining firmly attached to the underlying bony substrate (when present). With culture time, the constructs exhibited positive type II collagen staining as well as increased matrix elaboration (Safranin O staining for glycosaminoglycans) and material properties (Young's modulus and aggregate modulus). Despite the use of relatively large agarose constructs partially integrated with trabecular bone, no adverse diffusion limitation effects were observed. Anatomically shaped constructs on a bony substrate may represent a new paradigm in the design of a functional articular cartilage tissue replacement.     

Bioreactor operation for transgenic Nicotiana tabacum cell cultures and continuous production of recombinant human granulocyte-macrophage colony-stimulating factor by perfusion culture

The production of hGM-CSF was investigated in both a flask and a 5-l bioreactor, using transgenic Nicotiana tabacum suspension cells. While the maximum cell density and secreted hGM-CSF in the flask were 15.4 g l⁻¹ and 6.5 μg l⁻¹, respectively, those in the bioreactor were 15.6 g l⁻¹ and 7.6 μg l⁻¹. No detectable growth inhibition, shorter production of hGM-CSF and reduced cell viability in the batch bioreactor were observed under the specific conditions used compared with the flask culture. To improve the productivity, a perfusion culture was carried out in the bioreactor, with three different perfusion rates (0.5, 1.0 and 2.0 day⁻¹). In all cases, the hGM-CSF in the medium was significantly increased during the overall culture period (16 days), with maximum values 3.0-, 9.4- and 6.0-fold higher than those obtained in the batch cultures, respectively, even though the intracellular hGM-CSF content was not significantly varied by the perfusion rate. In terms of the total amount of hGM-CSF secreted, 205.5, 1073.2 and 1246.3 μg accumulated in the perfusate within 16 days at the perfusion rates of 0.5, 1.0 and 2.0 day⁻¹, respectively. It was concluded that the beneficial effect of perfusion on the production of hGM-CSF originated from the reduced proteolytic degradation due to the lower protease activity caused by the perfusion. Additionally, the cell growth and physiology in the perfusion culture were somewhat negatively affected by the increased perfusion rate, although the dry cell density steadily increased, and as a result, 19.4, 22.4 and 22.9 g l⁻¹ of maximum cells were obtained with perfusion rates of 0.5, 1.0 and 2.0 day⁻¹, respectively. This work highlighted the importance of proteolytic degradation in plant cell cultures for the production of secretory proteins and the feasibility of perfusion strategies for the continuous production of foreign proteins by the prevention of protein loss due to proteolytic enzymes.     

Pharmacokinetic study of a new testosterone-in-adhesive matrix patch applied every 2 days to hypogonadal men

The present study assessed pharmacokinetic testosterone time profile and dose proportionality after application of a new matrix testosterone patch (30, 45, and 60 cm² containing 0.5 mg of testosterone per cm²).

This open study was a single dose, three-period, crossover trial with a randomised treatment sequence in 24 hypogonadal men, consisting in a single 48-h application of two patches of 2× 30 cm², 2× 45 cm², 2× 60 cm², separated by a 5-day wash-out. Testosterone concentrations were determined during patch application and after patch removal. Dose proportionality was assessed on baseline corrected, dose normalised parameters for C_av,corr/D, C_max,corr/D and AUC_{(0–48),corr/D}.

Testosterone concentrations rose during the first 9 h following patch application, remained relatively sustained until 48 h and then decreased abruptly after patch removal, with a half-life of 1.3 h. Testosterone levels were maintained above 3 ng/mL for 42–45 h with all patches. C_av were 3.39, 4.03 and 4.58 ng/mL and C_max were 4.33, 5.29 and 6.18 ng/mL according to the doses. AUC_(0–48), C_av and C_max were dose dependent with mean ratios within the acceptance range (0.70–1.43).

In conclusion, dose linearity was demonstrated between the different strengths of testosterone patches. Application resulted in dose proportional increases in serum T levels in hypogonadal men into the low to mid-normal range within the first hours and achieved steady state for 48 h. During this short term study with three consecutive patch applications, this patch was shown to be efficient, convenient and safe with excellent adhesiveness and skin tolerability, and with no cross-contamination to partner or to environment.     

Preparation and characterization of YADH-bound magnetic nanoparticles

The covalently binding of yeast alcohol dehydrogenase (YADH) to magnetic nanoparticles via carbodiimide activation was studied. The magnetic nanoparticles Fe₃O₄ with a mean diameter of 10.6 nm were prepared by co-precipitating Fe²⁺ and Fe³⁺ ions in an ammonia solution and treating under hydrothermal conditions. Transmission electron microscopy (TEM) micrographs showed that the magnetic nanoparticles remained discrete and had no significant change in size after binding YADH. X-ray diffraction (XRD) patterns indicated both the magnetic nanoparticles before and after binding YADH were pure Fe₃O₄. Magnetic measurement revealed the resultant magnetic nanoparticles were superparamagnetic characteristics, and their saturation magnetization was reduced only slightly after enzyme binding. The analysis of Fourier transform infrared (FTIR) spectroscopy confirmed the binding of YADH to magnetic nanoparticles and suggested a possible binding mechanism. In addition, the measurement of protein content revealed that the maximum weight ratio of YADH bound to magnetic nanoparticles was 0.125, below which the binding efficiency of YADH was almost 100%. The kinetic measurements indicated the bound YADH retained 62% of its original activity and exhibited a 10-fold improved stability than did the free enzyme. The maximum specific activities and Michaelis constants were also determined.     

Efficient in vitro generation of adult multipotent cells from mobilized peripheral blood CD133+ cells

Abstract. Objectives : To generate non-haematopoietic tissues from mobilized haematopoietic CD133⁺ stem cells. Materials and methods : Mobilized peripheral blood CD133⁺ cells from adult healthy donors were used. In vitro ability of highly enriched CD133⁺ cells from mobilized peripheral blood to generate multipotent cells, and their potential to give rise to cells with characteristics of neuroectoderm, endoderm and mesoderm layers was investigated. Results : We found that a recently identified population of CD45⁺ adherent cells generated in vitro after culture of highly purified CD133⁺ cells for 3–5 weeks with Flt3/Flk2 ligand and interleukin-6 can, in presence of the appropriate microenvironmental cues, differentiate into neural progenitor-like cells (NPLCs), hepatocyte-like cells and skeletal muscle-like cells. We have termed them to be adult multipotent haematopoietic cells (AMHCs). AMHC-derived NPLCs expressed morphological, phenotypic and molecular markers associated with primary neural progenitor cells. They can differentiate into astrocyte-like cells, neuronal-like cells and oligodendrocyte-like cells. Moreover, AMHC-derived NPLCs produced 3,4-dihydrophenylalanine and dopamine and expressed voltage-activated ion channels, suggesting their functional maturation. In addition, AMHC-derived hepatocyte-like cells and skeletal muscle-like cells, showed typical morphological features and expressed primary tissue-associated proteins. Conclusion : Our data demonstrate that AMHCs may therefore serve as a novel source of adult multipotent cells for autologous replacement cell therapies.     

残膜密度及面积对土壤水分累积入渗量的影响

随着地膜使用量和年限的不断增加,残膜在农田土壤中不断累积并趋于破碎化,影响土壤水分的入渗过程。本研究采用室内土壤水分一维垂直入渗试验,通过设置5个残膜面积水平(0.25、0.5、1、2、8 cm²)和5个残膜密度水平(0、60、180、300、420 kg·hm^-2)共21组试验处理,分析了不同残膜密度及面积对土壤水分累积入渗量的影响。结果表明: 在容重1.53 g·cm^-3的黏壤土中掺入一定量的残膜,加快了土壤水分入渗速率,增加了累积入渗水量;不同残膜面积处理的总入渗水量总是在单片残膜面积为1 cm²时出现突变或转折;残膜面积和残膜密度较大和较小时都会对累积入渗量产生显著影响,且以0.5 cm²残膜面积与200 kg·hm^-2残膜密度组合处理为明显分界,单片残膜面积为0.25 cm²时,累积入渗量最大;土壤中均匀混入单片面积≤0.25 cm²的残膜后,土壤水分累积入渗量曲线的斜率变化显著不同于其他残膜处理,形成了“新构”土壤,具有独特的水分入渗特征。     

Comparison of alternative mesenchymal stem cell sources for cell banking and musculoskeletal advanced therapies

With the continuous discovery of new alternative sources containing mesenchymal stem cells (MSCs), regenerative medicine therapies may find tailored applications in the clinics. Although these cells have been demonstrated to express specific mesenchymal markers and are able to differentiate into mesenchymal lineages in ad hoc culture conditions, it is still critical to determine the yield and differentiation potential of these cells in comparative studies under the same standardized culture environment. Moreover, the opportunity to use MSCs from bone marrow (BM) of multiorgan donors for cell banking is of relevant importance. In the attempt to establish the relative potential of alternative MSCs sources, we analyzed and compared the yield and differentiation potential of human MSCs from adipose and BM tissues of cadaveric origins, and from fetal annexes (placenta and umbilical cord) after delivery using standardized isolation and culture protocols. BM contained a significantly higher amount of mononuclear cells (MNCs) compared to the other tissue sources. Nonetheless, a higher cell seeding density was needed for these cells to successfully isolate MSCs. The MNCs populations were highly heterogeneous and expressed variable MSCs markers with a large variation from donor to donor. After MSCs selection through tissue culture plastic adhesion, cells displayed a comparable proliferation capacity with distinct colony morphologies and were positive for a pool of typical MSCs markers. In vitro differentiation assays showed a higher osteogenic differentiation capacity of adipose tissue and BM MSCs, and a higher chondrogenic differentiation capacity of BM MSCs.     

Mechanical properties of compacted morselized cancellous bone graft using one-dimensional consolidation testing

Failures of orthopaedic procedures that use morselized cancellous bone (MCB) graft for load bearing are often due to gross displacement within the graft material. For this reason the mechanical behavior of MCB must be better understood. Our purpose is to present a detailed testing methodology for the mechanical characterization of MCB, and to illustrate how this methodology can be used to study the influence of water and fat content. Complete one-dimensional consolidation testing was performed on bovine cancellous bone processed to represent MCB typically used in surgery (52% water, 31% fat). The one-dimensional consolidation strain under a stress of 1.09 MPa was 30.9% and the confined modulus was 8.0 MPa. The coefficient of consolidation (rate of consolidation) was 2.2×10⁻⁵ cm²/s and the coefficient of secondary strain (steady-state creep rate) was 1.9%. While reducing the water content alone had some influence on properties, reducing the fat content improved both the static and dynamic behavior. A sample of MCB which had fat intentionally minimized and a lower overall moisture content (56% water, 5% fat) demonstrated 23.1% strain, a confined modulus of 9.6 MPa, a coefficient of consolidation of 3.4×10⁻³ cm²/s, and a coefficient of secondary strain of 0.9%. The test methods described in this technical note can be used to evaluate the influence of fluid content on the mechanical behavior of MCB.     

Optimizing the formulation of a myoglobin molecularly imprinted thin-film polymer--formed using a micro-contact imprinting method

Thin-film myoglobin molecularly imprinted polymers have been fabricated using a micro-contact approach. By initially selecting the cross-linker on the basis of it having a minimal recognition for the template and using this as a starting point for functional monomer selection, we have produced myoglobin imprinted polymers with exceptionally high selectivities.

The affinity of the polymers, for myoglobin, when prepared with a variety of different cross-linkers and no functional monomer was evaluated. Of these, tetraethylene glycol dimethacrylate (TEGDMA) exhibited the lowest affinity for the template species. Methyl methacrylate (MMA) was chosen as the functional monomer as when it was used in conjunction with TEGDMA, it exhibited maximum selectivity for the template compared to polymers made with other functional monomers.

With a MMA to TEGDMA ratio of 1 to 3, the myoglobin molecularly imprinted polymer adsorbed 15.03 ± 0.89 × 10⁻¹¹ mole/cm² of template from a 5.68 × 10⁻⁷ M myoglobin solution, compared to 2.58 ± 0.02 × 10⁻¹¹ mole/cm² for a polymer of similar composition, but formed in the absence of a template. Various washing conditions, using alkaline media to remove the template, were investigated. An extraction solvent comprising 2 wt.% SDS and 0.6 wt.% NaOH used at 80 °C for 30 min was shown to give the highest imprinting factor i.e. 5.83 with 72.82% myoglobin removal.

The saturation kinetics of template binding to the thin-film MIP were examined and found to display a simple two-phase profile typical of non-cooperative binding. A Scatchard binding plot showed the dissociation constant (K_d) for the specific binding phase to be 3.4 × 10⁻⁷ M and the binding site capacity to be 7.24 × 10⁻¹¹ mole/cm². For the non-specific binding phase, K_d was found to be 1.355 × 10⁻⁵ M and the binding site capacity was determined as 9.62 × 10⁻¹⁰ mole/cm².

Selectivity experiments were carried out in both single protein and binary protein systems all using a total protein concentration of 5.68 × 10⁻⁷ M. The molar ratio of adsorbed myoglobin to IgG, HSA and hemoglobin was found to 115.5, 230.9 and 2.5, respectively. While, in binary competition systems, myoglobin selectivity to IgG, HSA and hemoglobin was, respectively, 94.18, 98.21 and 61.09%. Rebinding in natural biological matrices, i.e. human serum or urine, showed the imprinted films to have significantly greater uptake than non-imprinted films. Re-binding in undiluted urine was found to be a facile process, with the imprinting factor, i.e. the ratio of MIP to NIP binding, being determined as 37.4.