Crystallographic structure of metal-free concanavalin A at 2.5 Å resolution

The three-dimensional structure of demetallized concanavalin A has been determined at 2.5 Å resolution and refined to a crystallographic R-factor of 18%. The lectin activity of concanavalin A requires the binding of both a transition metal ion, generally Mn²⁺, and a Ca²⁺ ion in two neighboring sites in close proximity to the carbohydrate binding site. Large structural differences between the native and the metal-free lectin are observed in the metal-binding region and consequently for the residues involved in the specific binding of saccharides. The demetallization invokes a series of conformational changes in the protein backbone, apparently initiated mainly by the loss of the calcium ion. Most of the Mn²⁺ ligands retain their position, but the Ca²⁺ binding site is destroyed. The Ala207-Asp208 peptide bond, in the β-strand neighboring the metal-binding sites, undergoes a cis to trans isomerization. The cis conformation for this bond is a highly conserved feature among the leguminous lectins and is critically maintained by the Ca²⁺ ion in metal-bound concanavalin A. A further and major change adjacent to the isomerized bond is an expansion of the loop containing the monosaccharide ligand residues Leu99 and Tyr100. The dispersion of the ligand residues for the monosaccharide binding site (Asn14, Agr228, Asp208, Leu99, and Tyr100) in metalfree concanavalin A abolishes the lectin's ability to bind saccharides. Since the quaternary structure of legume lectins is essential to their biological role, the tetramer formation was analyzed. In the crystal (pH 5), the metal-free concanavalin A dimers associate into a tetramer that is similar to the native one, but with a drastically reduced number of inter-dimer interactions. This explains the tetramer dissociation into dimers below pH values of 6.5. © 1995 Wiley-Liss, Inc.     

Structure determination and refinement of bovine lens leucine aminopeptidase and its complex with bestatin.

The three-dimensional structure of bovine lens leucine aminopeptidase (EC 3.4.11.1) complexed with bestatin, a slow-binding inhibitor, has been solved to 3.0 A resolution by the multiple isomorphous replacement method with phase combination and density modification. In addition, this structure and the structure of the isomorphous native enzyme have been refined at 2.25 and 2.32 A resolution, respectively, with crystallographic R-factors of 0.180 and 0.159, respectively. The current structural model for the enzyme includes the two zinc ions and 481 of the 487 amino acid residues comprising the asymmetric unit. The enzyme is physiologically active as a hexamer, which has 32 symmetry, and is triangular in shape with a triangle edge length of 115 A and maximal thickness of 90 A. Monomers are crystallographically equivalent. Each is folded into two unequal alpha/beta domains connected by an alpha-helix to give a comma-like shape with approximate maximal dimensions of 90 A x 55 A x 55 A. The secondary structural composition is 35% alpha-helix and 23% beta-strand. The N-terminal domain (160 amino acid residues) mediates trimer-trimer interactions and does not appear to participate directly in catalysis, while the C-terminal domain (327 amino acid residues) is responsible for catalysis and binds the two zinc ions, which are less than 3 A apart. These two metal ions are located near the edge of an eight-stranded, saddle-shaped beta-sheet. The zinc ion that has the lower temperature factor is co-ordinated by one carboxylate oxygen atom from each of Asp255, Asp332 and Glu334, and the carbonyl oxygen of Asp332. The other zinc ion, presumed to be readily exchangeable, is co-ordinated by one carboxylate oxygen atom of each of Asp273 and Glu334 and the side-chain amino group of Lys250. The active site also contains two positively charged residues, Lys262 and Arg336. The six active sites are themselves located in the interior of the hexamer, where they line a disk-shaped cavity of radius 15 A and thickness 10 A. Access to this cavity is provided by solvent channels that run along the 2-fold symmetry axes. Bestatin binds to one of the active site zinc ions, and its phenylalanine and leucine side-chains occupy hydrophobic pockets adjacent to the active site. Finally, the relationship between bovine lens leucine aminopeptidase and the homologous enzyme pepA from Escherichia coli is discussed.     

Two alternative substrate paths for compound I formation and reduction in catalase-peroxidase KatG from Burkholderia pseudomallei

Five residues in the multifunctional catalase-peroxidase KatG of Burkholderia pesudomallei are essential for catalase, but not peroxidase, activity. Asp141 is the only one of these catalase-specific residues not related with the covalent adduct found in KatGs that when replaced with a nonacidic residue reduces catalase activity to 5% of native levels. Replacing the nearby catalytic residue Arg108 causes a reduction in catalase activity to 35% of native levels, whereas a variant with both Asp141 and Arg108 replaced exhibits near normal catalase activity (82% of native), suggesting a synergism in the roles of the two residues in support of catalase activity in the enzyme. Among the Asp141 variants, D141E is unique in retaining normal catalase activity but with modified kinetics, suggesting more favorable compound I formation and less favorable compound I reduction. The crystal structure of the D141E variant has been determined at 1.8-A resolution, revealing that the carboxylate of Glu141 is moved only slightly compared with Asp141, but retains its hydrogen bond interaction with the main chain nitrogen of Ile237. In contrast, the low temperature ferric Electron Paramagnetic Resonance spectra of the D141A, R108A, and R108A/D141A variants are consistent with modifications of the water matrix and/or the relative positioning of the distal residue side chains. Such changes explain the reduction in catalase activity in all but the double variant R108A/D141A. Two pathways of hydrogen bonded solvent lead from the entrance channel into the heme active site, one running between Asp141 and Arg108 and the second between Asp141 and the main chain atoms of residues 237-239. It is proposed that binding of substrate H(2)O(2) to Asp141 and Arg108 controls H(2)O(2) access to the heme active site, thereby modulating the catalase reaction.     

Site-directed mutagenesis of the calcium-binding site of blood coagulation factor XIIIa.

Blood coagulation factor XIIIa is a calcium-dependent enzyme that covalently ligates fibrin molecules during blood coagulation. X-ray crystallography studies identified a major calcium-binding site involving Asp(438), Ala(457), Glu(485), and Glu(490). We mutated two glutamic acid residues (Glu(485) and Glu(490)) and three aspartic acid residues (Asp(472), Asp(476), and Asp(479)) that are in close proximity. Alanine substitution mutants of these residues were constructed, expressed, and purified from Escherichia coli. The K(act) values for calcium ions increased by 3-, 8-, and 21-fold for E485A, E490A, and E485A,E490A, respectively. In addition, susceptibility to proteolysis was increased by 4-, 9-, and 10-fold for E485A, E490A, and E485A,E490A, respectively. Aspartic acids 472, 476, and 479 are not involved directly in calcium binding since the K(act) values were not changed by mutagenesis. However, Asp(476) and Asp(479) are involved in regulating the conformation for exposure of the secondary thrombin cleavage site. This study provides biochemical evidence that Glu(485) and Glu(490) are Ca(2+)-binding ligands that regulate catalysis. The binding of calcium ion to this site protects the molecule from proteolysis. Furthermore, Asp(476) and Asp(479) play a role in modulating calcium-dependent conformational changes that cause factor XIIIa to switch from a protease-sensitive to a protease-resistant molecule.     

Key Amino Acid Residues Involved in Multi-Point Binding Interactions between Brazzein, a Sweet Protein, and the T1R2-T1R3 Human Sweet Receptor

The sweet protein brazzein [recombinant protein with sequence identical with the native protein lacking the N-terminal pyroglutamate (the numbering system used has Asp2 as the N-terminal residue)] activates the human sweet receptor, a heterodimeric G-protein-coupled receptor composed of subunits Taste type 1 Receptor 2 (T1R2) and Taste type 1 Receptor 3 (T1R3). In order to elucidate the key amino acid(s) responsible for this interaction, we mutated residues in brazzein and each of the two subunits of the receptor. The effects of brazzein mutations were assayed by a human taste panel and by an in vitro assay involving receptor subunits expressed recombinantly in human embryonic kidney cells; the effects of the receptor mutations were assayed by in vitro assay. We mutated surface residues of brazzein at three putative interaction sites: site 1 (Loop43), site 2 (N- and C-termini and adjacent Glu36, Loop33), and site 3 (Loop9-19). Basic residues in site 1 and acidic residues in site 2 were essential for positive responses from each assay. Mutation of Y39A (site 1) greatly reduced positive responses. A bulky side chain at position 54 (site 2), rather than a side chain with hydrogen-bonding potential, was required for positive responses, as was the presence of the native disulfide bond in Loop9-19 (site 3). Results from mutagenesis and chimeras of the receptor indicated that brazzein interacts with both T1R2 and T1R3 and that the Venus flytrap module of T1R2 is important for brazzein agonism. With one exception, all mutations of receptor residues at putative interaction sites predicted by wedge models failed to yield the expected decrease in brazzein response. The exception, hT1R2 (human T1R2 subunit of the sweet receptor):R217A/hT1R3 (human T1R3 subunit of the sweet receptor), which contained a substitution in lobe 2 at the interface between the two subunits, exhibited a small selective decrease in brazzein activity. However, because the mutation was found to increase the positive cooperativity of binding by multiple ligands proposed to bind both T1R subunits (brazzein, monellin, and sucralose) but not those that bind to a single subunit (neotame and cyclamate), we suggest that this site is involved in subunit-subunit interaction rather than in direct brazzein binding. Results from this study support a multi-point interaction between brazzein and the sweet receptor by some mechanism other than the proposed wedge models.     

Structure-function studies of the non-heme iron active site of isopenicillin N synthase: some implications for catalysis

Isopenicillin N synthase (IPNS) is a non-heme ferrous iron-dependent oxygenase that catalyzes the ring closure of delta-(L-alpha-aminoadipoyl)-L-cysteinyl-D-valine (ACV) to form isopenicillin N. Spectroscopic studies and the crystal structure of IPNS show that the iron atom in the active species is coordinated to two histidine and one aspartic acid residues, and to ACV, dioxygen and H2O. We previously showed by site-directed mutagenesis that residues His212, Asp214 and His268 in the IPNS of Streptomyces jumonjinensis are essential for activity and correspond to the iron ligands identified by crystallography. To evaluate the importance of the nature of the protein ligands for activity, His214 and His268 were exchanged with asparagine, aspartic acid and glutamine, and Asp214 replaced with glutamic acid, histidine and cysteine, each of which has the potential to bind iron. Only the Asp214Glu mutant retained activity, approximately 1% that of the wild type. To determine the importance of the spatial arrangement of the protein ligands for activity, His212 and His268 were separately exchanged with Asp214; both mutant enzymes were completely defective. These findings establish that IPNS activity depends critically on the presence of two histidine and one carboxylate ligands in a unique spatial arrangement within the active site. Molecular modeling studies of the active site employing the S. jumonjinensis IPNS crystal structure support this view. Measurements of iron binding by the wild type and the Asp214Glu, Asp214His and Asp214Cys-modified proteins suggest that Asp214 may have a role in catalysis as well as in iron coordination.     

Functional importance of calcium binding sites in outer membrane phospholipase A

Outer membrane phospholipase A (OMPLA) is an integral membrane enzyme that hydrolyses phospholipids requiring Ca²⁺ as cofactor. In vitro studies have shown that OMPLA is only active as a dimer. The structures of monomeric and dimeric OMPLA provided possible clues to the activation process. In the inhibited dimeric species calcium ions are located at the dimer interface ideally suited to stabilise the oxyanion intermediates formed during catalysis. The side chain hydroxyl function of Ser152 is one of the ligands of this interfacial calcium. In the crystal structure of monomeric OMPLA the interfacial calcium site is lacking, but calcium was found to bind at a site involving the carboxylates of Asp149 and Asp184. In the current study the relevance of the identified calcium sites has been studied by site-directed mutagenesis. The Ser152Asn variant confirmed the importance of the interfacial calcium site for catalysis, and also demonstrated that this site is essentially involved in the dimerisation process. Replacements of the ligands in monomeric OMPLA, i.e. Asp149Asn, Asp149Ala and Asp184Asn, only showed minor effects on catalytic activity and dimerisation. A stronger effect observed for the variant Asp184Ala was explained by the proximity of Asp184 to the catalytically important Ser152 residue. We propose that Asp149 and Asp184 provide an electronegative funnel that may facilitate Ca²⁺ transfer to the interfacial calcium site.     

Refined crystal structure of dogfish M4 apo-lactate dehydrogenase

The crystal structure of M4 apo-lactate dehydrogenase from the spiny dogfish (Squalus acanthius) was initially refined by a constrained-restrained, and subsequently restrained, least-squares technique. The final structure contained 286 water molecules and two sulfate ions per subunit and gave an R-factor of 0.202 for difraction data between 8.0 and 2.0 A resolution. The upper limit for the co-ordinate accuracy of the atoms was estimated to be 0.25 A. The elements of secondary structure of the refined protein have not changed from those described previously, except for the appearance of a one-and-a-half turn 3(10) helix immediately after beta J. There is also a short segment of 3(10) helix between beta C and beta D in the part of the chain that connects the two beta alpha beta alpha beta units of the six-stranded parallel sheet (residues Tyr83 to Ala87). Examination of the interactions among the different elements of secondary structure by means of a surface accessibility algorithm supports the four structural clusters in the subunit. The first of the two sulfate ions is in the active site and occupies a cavity near the essential His195. Its nearest protein ligands are Arg171, Asp168 and Asn140. The second sulfate ion is located near the P-axis subunit interface. It is liganded by His188 and Arg173. These two residues are conserved in bacterial lactate dehydrogenase and form part of the fructose 1,6-bisphosphate effector binding site. Two other data sets in which one (collected at pH 7.8) or both (collected at pH 6.0) sulfate ions were replaced by citrate ions were also analyzed. Five cycles of refinement with respect to the pH 6.0 data (25 to 2.8 A resolution) resulted in an R value of 0.191. Only water molecules occupy the subunit boundary anion binding site at pH 7.8. The amino acid sequence was found to be in poor agreement with (2Fobs-Fcalc) electron density maps for the peptide between residues 207 and 211. The original sequence WNALKE was replaced by NVASIK. The essential His195 is hydrogen bonded to Asp168 on one side and Asn140 on the other. The latter residue is part of a turn that contains the only cis peptide bond of the structure at Pro141. The "flexible loop" (residues 97 to 123), which folds down over the active center in ternary complexes of the enzyme with substrate and coenzyme, has a well-defined structure. Analysis of the environment of Tyr237 suggests how its chemical modification inhibits the enzyme.     

The X-ray structure of human mannan-binding lectin-associated protein 19 (MAp19) and its interaction site with mannan-binding lectin and L-ficolin

MAp19 is an alternative splicing product of the MASP-2 gene comprising the N-terminal CUB1-epidermal growth factor (EGF) segment of MASP-2, plus four additional residues at its C-terminal end. Like full-length MASP-2, it forms Ca(2+)-dependent complexes with mannan-binding lectin (MBL) and L-ficolin. The x-ray structure of human MAp19 was solved to a resolution of 2.5 A. It shows a head to tail homodimer held together by interactions between the CUB1 module of one monomer and the EGF module of its counterpart. A Ca(2+) ion bound to each EGF module stabilizes the dimer interfaces. A second Ca(2+) ion is bound to the distal end of each CUB1 module, through six ligands contributed by Glu(52), Asp(60), Asp(105), Ser(107), Asn(108), and a water molecule. Compared with its counterpart in human C1s, the N-terminal end of the MAp19 CUB1 module contains a 7-residue extension that forms additional inter-monomer contacts. To identify the residues involved in the interaction of MAp19 with MBL and L-ficolin, point mutants were generated and their binding ability was determined using surface plasmon resonance spectroscopy. Six mutations at Tyr(59), Asp(60), Glu(83), Asp(105), Tyr(106), and Glu(109) either strongly decreased or abolished interaction with both MBL and L-ficolin. These mutations map a common binding site for these proteins located at the distal end of each CUB1 module and stabilized by the Ca(2+) ion.     

The crystal and molecular structure of the Rhizomucor miehei triacylglyceride lipase at 1.9 A resolution.

The crystal and molecular structure of a triacylglyceride lipase (EC 3.1.1.3) from the fungus Rhizomucor miehei was analyzed using X-ray single crystal diffraction data to 1.9 A resolution. The structure was refined to an R-factor of 0.169 for all available data. The details of the molecular architecture and the crystal structure of the enzyme are described. A single polypeptide chain of 269 residues is folded into a rather unusual singly wound beta-sheet domain with predominantly parallel strands, connected by a variety of hairpins, loops and helical segments. All the loops are right-handed, creating an uncommon situation in which the central sheet is asymmetric in that all the connecting fragments are located on one side of the sheet. A single N-terminal alpha-helix provides the support for the other, distal, side of the sheet. Three disulfide bonds (residues 29-268, 40-43, 235-244) stabilize the molecule. There are four cis peptide bonds, all of which precede proline residues. In all, 230 ordered water molecules have been identified; 12 of them have a distinct internal character. The catalytic center of the enzyme is made up of a constellation of three residues (His257, Asp203 and Ser144) similar in structure and function to the analogous (but not homologous) triad found in both of the known families of serine proteinases. The fourth residue in this system equivalent to Thr/Ser in proteinases), hydrogen bonded to Asp, is Tyr260. The catalytic site is concealed under a short amphipatic helix (residues 85 to 91), which acts as "lid", opening the active site when the enzyme is adsorbed at the oil-water interface. In the native enzyme the "lid" is held in place by hydrophobic interactions.     

Structure-based functional identification of Helicobacter pylori HP0268 as a nuclease with both DNA nicking and RNase activities

HP0268 is a conserved, uncharacterized protein from Helicobacter pylori. Here, we determined the solution structure of HP0268 using three-dimensional nuclear magnetic resonance (NMR) spectroscopy, revealing that this protein is structurally most similar to a small MutS-related (SMR) domain that exhibits nicking endonuclease activity. We also demonstrated for the first time that HP0268 is a nicking endonuclease and a purine-specific ribonuclease through gel electrophoresis and fluorescence spectroscopy. The nuclease activities for DNA and RNA were maximally increased by Mn²⁺ and Mg²⁺ ions, respectively, and decreased by Cu²⁺ ions. Using NMR chemical shift perturbations, the metal and nucleotide binding sites of HP0268 were determined to be spatially divided but close to each other. The lysine residues (Lys7, Lys11 and Lys43) are clustered and form the nucleotide binding site. Moreover, site-directed mutagenesis was used to define the catalytic active site of HP0268, revealing that this site contains two acidic residues, Asp50 and Glu54, in the metal binding site. The nucleotide binding and active sites are not conserved in the structural homologues of HP0268. This study will contribute to improving our understanding of the structure and functionality of a wide spectrum of nucleases.     

Structure of satellite tobacco necrosis virus after crystallographic refinement at 2.5 Å resolution

The structure of the protein subunit of satellite tobacco necrosis virus has been solved at 3.7 Å resolution. We have now crystallographically refined the original model and extended the resolution to 2.5 Å in order to get a model accurate enough to explain the details of the subunit interactions. The refinement was done with a novel method utilizing the icosahedral symmetry of the virus particle.The final model shows a complicated network of interactions, involving salt linkages, hydrogen bonds and hydrophobic contacts. In addition, we have located three different metal ion sites in the protein shell, linking the protein subunits together. These sites are probably occupied by calcium ions. One site is found in a general position near the icosahedral 3-fold axis of the virus. The ligands form an octahedral arrangement, with two main chain carbonyl oxygens (O-61 and O-64), one carboxylate oxygen (OD1 from Asp194) of the same subunit and a second carboxylate oxygen (OE1 of Glu25) from a 3-fold related subunit. Two water molecules complete the octahedral arrangement. A second site is on the icosahedral 3-fold axis and is liganded by the carboxylate oxygens of the 3-fold related Asp55 residues. The third metal ion site is found on the 5-fold axis, liganded by the five carbonyl oxygens of Thr138 and two water molecules.We are unable to locate the first 11 N-terminal amino acid residues, which point into the virus interior. No interpretable density for RNA has been found, indicating that the nucleic acid of the virus does not have a unique orientation in the crystal.     

Spectroscopic study on the communication between a heme a3 propionate, Asp399 and the binuclear center of cytochrome c oxidase from Paracoccus denitrificans

The proton pumping mechanism of cytochrome c oxidase on a molecular level is highly disputed. Recently theoretical calculations and real time electron transfer measurements indicated the involvement of residues in the vicinity of the ring A propionate of heme a₃, including Asp399 and the Cu_B ligands His 325, 326. In this study we probed the interaction of Asp399 with the binuclear center and characterize the protonation state of its side chain. Redox induced FTIR difference spectra of mutations at the site in direct comparison to wild type, indicate that below pH 5 Asp 399 displays signals typical for the deprotonation of the acidic residue with reduction of the enzyme. Interestingly at a pH higher than 5, no contributions from Asp 399 are evident. In order to probe the interaction of the site with the binuclear center we followed the rebinding of CO by infrared spectroscopy for mutations on residue Asp399 to Glu, Asn and Leu. Previously different CO conformers have been identified for bacterial cytochrome c oxidases, and its pH dependent behaviour discussed to be relevant for catalysis. Interestingly we observe the lack of this pH dependency and a strong influence on the observable conformers for all mutants studied here, clearly suggesting a communication of the site with the heme-copper center and the nearby histidine residues.     

Oxygen transport proteins: III. Structural studies of the scorpion (Buthus sindicus) hemocyanin, partial primary structure of its subunit Bsin1

The hemocyanin (Hc) from Buthus sindicus, studied in the native state, demonstrated to be an aggregate of eight different types of subunits arranged in four cubic hexamers. Both, the 'top' and the 'side' views of the native molecule have been identified from the negatively stained specimens using transmission electron microscopy. Out of these, eight different polypeptide chains, the partial primary structure (68%) of a subunit Bsin1 (Mr = 72422.7 Da) was established using a combination of automated Edman degradation and mass spectrometry. A multiple sequence alignment with other closely related cheliceratan Hc subunits revealed average identities of ca. 60%. Most of the structurally important residues, i.e. copper and calcium-binding ligands, as well as the residues involved in the presumed oxygen entrance pathway, proved to be strictly conserved in Bsin1. Sequence variations have been observed around the functionally important chloride-binding site, not only for the B. sindicus subunit Bsin1, but also for the subunit Aaus-6 of the scorpion A. australis and the subunit Ecal-a from the spider Eurypelma californicum Hcs. Deviation in the primary structure related to the chloride-binding site suggest that the effect of chloride ions may vary in different hemocyanins. Furthermore, the secondary structural contents of the Hc subunit Bsin1 were determined by circular dichroism revealing ca. 33% alpha-helix, 18%, beta-sheet, 19% beta-turn, and 30% random coil composition. These values are in good agreement with the crystal structure of the closely related Hc subunit Lpol-II from horseshoe crab L. polyphemus. Electron microscopic studies of the purified Hc subunit under native conditions revealed that Bsin1 has self aggregation properties. Results of these studies are discussed.     

Crystal structure of the YdjC-family protein TTHB029 from Thermus thermophilus HB8: structural relationship with peptidoglycan N-acetylglucosamine deacetylase

The YdjC-family protein is widely distributed, from human to bacteria, but so far no three-dimensional structure and functional analysis of this family of proteins has been reported. We determined the three-dimensional structure of the YdjC homolog TTHB029 at a resolution of 2.9 Å. The overall structure of the monomer consists of (βα)-barrel fold forming a homodimer. Asp21, His60, and His127 residues coordinate to Mg²⁺ as a possible active site. TTHB029 shows structural similarity to the peptidoglycan N-acetylglucosamine deacetylase from Streptococcus pneumoniae (SpPgdA). The active site groove of SpPgdA includes the Zn²⁺ coordinated to Asp276, His326, and His330. Despite the low sequence identity, metal-binding residues of Asp-His-His were conserved among the two enzymes. There were definitive differences, however, in that one of the histidines of the metal-binding site was substituted for the other histidine located on the other loop. Moreover, these important metal-binding residues and the residues of the presumed active site are fully conserved in YdjC-family protein.     

Crystal structure of Escherichia coli manganese superoxide dismutase at 2.1-Å resolution

The three-dimensional structure of the manganese-dependent superoxide dismutase (MnSOD) from Escherichia coli has been determined by X-ray crystallography at 2.1?Å resolution. The protein crystallizes with two homodimers in the asymmetric unit, and a model comprising 6528 protein atoms (residues 1–205 of all four monomers), four manganese ions and 415 water molecules has been refined to an R factor of 0.188 (R _free 0.218). The structure shows a high degree of similarity with other MnSOD and FeSOD enzymes. The Mn centres are 5-coordinate, trigonal bipyramidal, with His26 and a solvent molecule, probably a hydroxide ion, as apical ligands, and His81, Asp167 and His171 as equatorial ligands. The coordinated solvent molecule is linked to a network of hydrogen bonds involving the non-coordinated carboxylate oxygen of Asp167 and a conserved glutamine residue, Gln146. The MnSOD dimer is notable for the way in which the two active sites are interconnected and a "bridge" comprising His171 of one monomer and Glu170 of the other offers a route for inter-site communication. Comparison of E. coli MnSOD and FeSOD (a) reveals some differences in the dimer interface, (b) yields no obvious explanation for their metal specificities, and (c) provides a structural basis for differences in DNA binding, where for MnSOD the groove formed by dimerization is complementary in charge and surface contour to B-DNA.     

Comparison of the binding of glucose and glucose 1-phosphate derivatives to T-state glycogen phosphorylase b

The binding of T-state- and R-state-stabilizing ligands to the catalytic C site of T-state glycogen phosphorylase b has been investigated by crystallographic methods to study the interactions made and the conformational changes that occur at the C site. The compounds studied were alpha-D-glucose, 1, a T-state-stabilizing inhibitor of the enzyme, and the R-state-stabilizing phosphorylated ligands alpha-D-glucose 1-phosphate (2), 2-deoxy-2-fluoro-alpha-D-glucose 1-phosphate (3), and alpha-D-glucose 1-methylenephosphonate (4). The complexes have been refined, giving crystallographic R factors of less than 19%, for data between 8 and 2.3 A. Analysis of the refined structures shows that the glucosyl portions of the phosphorylated ligands bind in the same orientation as glucose and retain most of the interactions formed between glucose and the enzyme. However, the phosphates of the phosphorylated ligands adopt different conformations in each case; the stability of these conformations have been studied by using computational methods to rationalize the different binding modes. Binding of the phosphorylated ligands is accompanied by movement of C-site residues, most notably a shift of a loop out of the C site and toward the exterior of the protein. The C-site alterations do not include movement of Arg569, which has been observed in both the refined complex with 1-deoxy-D-gluco-heptulose 2-phosphate (5) [Johnson, L. N., et al (1990) J. Mol. Biol. 211, 645-661] and in the R-state enzyme [Barford, D. & Johnson, L. N. (1989) Nature 340, 609-616]. Refinement of the ligand complexes has also led to the observation of additional electron density for residues 10-19 at the N-terminus which had not previously been localized in the native structure. The conformation of this stretch of residues is different from that observed in glycogen phosphorylase a.     

Structure of bovine pancreatic phospholipase A2 at 1.7 Å resolution

The crystal structure of bovine pancreatic phospholipase A2 has been refined to 1.7 Å resolution. The starting model for this refinement was the previously published structure at a resolution of 2.4 Å (Dijkstra et al., 1978). This model was adjusted to the multiple isomorphous replacement map with Diamond's real space refinement program (Diamond, 1971,1974) and subsequently refined using Agarwal's least-squares method (Agarwal, 1978). The final crystallographic R-factor is 17.1% and the estimated root-mean-square error in the positional parameters is 0.12 Å. The refined model allowed a detailed survey of the hydrogen-bonding pattern in the molecule. The essential calcium ion is located in the active site and is stabilized by one carboxyl group as well as by a peptide loop with many residues unvaried in all known phospholipase A2 sequences. Five of the oxygen ligands octahedrally surround the ion. The sixth octahedral position is shared between one of the carboxylate oxygens of Asp49 and a water molecule. The entrance to the active site is surrounded by residues involved in the binding of micelle substrates. The N-terminal region plays an important role here. Its α-NH₊³ group is buried and interacts with Gln4, the carbonyl oxygen of Asn71 and a fully enclosed water molecule, which provides a link between the N terminus and several active site residues. A total of 106 water molecules was located in the final structure, most of them in a two-layer shell around the protein molecule. The mobility in the structure was derived from the individual atomic temperature factors. Minimum mobility is found for the main chain atoms in the central part of the two long α-helices. The active site is rather rigid.     

Crystal structures of the psychrophilic alpha-amylase from Alteromonas haloplanctis in its native form and complexed with an inhibitor.

Alteromonas haloplanctis is a bacterium that flourishes in Antarctic sea-water and it is considered as an extreme psychrophile. We have determined the crystal structures of the alpha-amylase (AHA) secreted by this bacterium, in its native state to 2.0 angstroms resolution as well as in complex with Tris to 1.85 angstroms resolution. The structure of AHA, which is the first experimentally determined three-dimensional structure of a psychrophilic enzyme, resembles those of other known alpha-amylases of various origins with a surprisingly greatest similarity to mammalian alpha-amylases. AHA contains a chloride ion which activates the hydrolytic cleavage of substrate alpha-1,4-glycosidic bonds. The chloride binding site is situated approximately 5 angstroms from the active site which is characterized by a triad of acid residues (Asp 174, Glu 200, Asp 264). These are all involved in firm binding of the Tris moiety. A reaction mechanism for substrate hydrolysis is proposed on the basis of the Tris inhibitor binding and the chloride activation. A trio of residues (Ser 303, His 337, Glu 19) having a striking spatial resemblance with serine-protease like catalytic triads was found approximately 22 angstroms from the active site. We found that this triad is equally present in other chloride dependent alpha-amylases, and suggest that it could be responsible for autoproteolytic events observed in solution for this cold adapted alpha-amylase.