Synthesis and characterization of RGD peptide grafted poly(ethylene glycol)-b-poly(L-lactide)-b-poly(L-glutamic acid) triblock copolymer

Advances in tissue engineering require biofunctional scaffolds that can provide not only physical support for cells but also chemical and biological cues needed in forming functional tissues. To achieve this goal, a novel RGD peptide grafted poly(ethylene glycol)-b-poly(L-lactide)-b-poly(L-glutamic acid) (PEG-PLA-PGL/RGD) was synthesized in four steps (1) to prepare diblock copolymer PEG-PLA-OH and to convert its -OH end group into -NH(2) (to obtain PEG-PLA-NH(2)), (2) to prepare triblock copolymer PEG-PLA-PBGL by ring-opening polymerization of NCA (N-carboxyanhydride) derived from benzyl glutamate with diblock copolymer PEG-PLA-NH(2) as macroinitiator, (3) to remove the protective benzyl groups by catalytic hydrogenation of PEG-PLA-PBGL to obtain PEG-PLA-PGL, and (4) to react RGD (arginine-glycine-(aspartic amide)) with the carboxyl groups of the PEG-PLA-PGL. The structures of PEG-PLA-PGL/RGD and its precursors were confirmed by (1)H NMR, FT-IR, amino acid analysis, and XPS analysis. Addition of 5 wt % PEG-PLA-PGL/RGD into a PLGA matrix significantly improved the surface wettability of the blend films and the adhesion and proliferation behavior of human chondrocytes and 3T3 cells on the blend films. Therefore, the novel RGD-grafted triblock copolymer is expected to find application in cell or tissue engineering.     

Preparation and spectroscopic characterization of methoxy poly(ethylene glycol)-grafted water-soluble chitosan

The object of this study was to test the solubility of a methoxy poly(ethylene glycol) (MPEG)-grafted chitosan copolymer in organic solvents and aqueous solution. Water-soluble chitosan with low molecular weight (LMWSC) was used in a PEG-graft copolymerization. The MPEG was conjugated to chitosan using 4-dicyclohexylcarbodimide (DCC), and N-hydroxysuccimide (NHS). Introduction of PEG was confirmed by (1)H and (13)C NMR spectroscopy and FT-IR spectroscopy. The degree of substitution (DS) of MPEG into chitosan was calculated from (1)H NMR data and also by estimating the molecular weight (MW) using gel permeation chromatography (GPC). The DS values obtained from (1)H NMR spectroscopy and GPC were similar, indicating that MPEG-grafted LMWSC was synthesized and properly characterized. Furthermore, the introduction of PEG into chitosan increases the solubility in aqueous solutions over a range of pH values (4.0-11.0) and organic solvents such as DMF, DMSO, ethanol, and acetone.     

Synthesis and characterization of star poly(epsilon-caprolactone)-b-poly(ethylene glycol) and poly(L-lactide)-b-poly(ethylene glycol) copolymers: evaluation as drug delivery carriers

Two types of 32 arm star polymers incorporating amphiphilic block copolymer arms have been synthesized and characterized. The first type, stPCL-PEG 32, is composed of a polyamidoamine (PAMAM) dendrimer as the core with radiating arms having poly(epsilon-caprolactone) (PCL) as an inner lipophilic block in the arm and poly(ethylene glycol) (PEG) as an outer hydrophilic block. The second type, stPLA-PEG 32, is similar but with poly(L-lactide) (PLA) as the inner lipophilic block. Characterization with SEC, (1)H NMR, FTIR, and DSC confirmed the structure of the polymers. Micelle formation by both star copolymers was studied by fluorescence spectroscopy. The stPCL-PEG 32 polymer exhibited unimolecular micelle behavior. It was capable of solubilizing hydrophobic molecules, such as pyrene, in aqueous solution, while not displaying a critical micelle concentration. In contrast, the association behavior of stPLA-PEG 32 in aqueous solution was characterized by an apparent critical micelle concentration of ca. 0.01 mg/mL. The hydrophobic anticancer drug etoposide can be encapsulated in the micelles formed from both polymers. Overall, the stPCL-PEG 32 polymer exhibited a higher etoposide loading capacity (up to 7.8 w/w % versus 4.3 w/w % for stPLA-PEG 32) as well as facile release kinetics and is more suitable as a potential drug delivery carrier.     

Degradation behavior of poly(epsilon-caprolactone)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone) micelles in aqueous solution

Poly(epsilon-caprolactone)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone) triblock copolymers were synthesized by the ring-opening polymerization of epsilon-caprolactone in the presence of hydroxyl-terminated poly(ethylene glycol) with different molecular weights, using stannous octoate catalyst. Micelles prepared by the precipitation method with these triblock copolymers exhibit a core-shell structure. The degradation behaviors of these core-shell micelles in aqueous solution were investigated by FT-IR, 1H NMR, GPC, DLS, TEM, and AFM. It was found that the degradation behavior of micelles in aqueous solution was quite different from that of bulk materials. The size of the micelles increased in the initial degradation stages and decreased gradually when the degradation period was extended. The caprolactone/ethylene oxide (CL/EO) ratio in micelles measured by NMR also shows an increase at the initial degradation stage and a decrease at later stages. The morphology of these micelles became more and more irregular during the degradation period. We explain the observed behavior by a two-stage degradation mechanism with interfacial erosion between the cores and the shells followed by core erosion.     

Micellization phenomena of amphiphilic block copolymers based on methoxy poly(ethylene glycol) and either crystalline or amorphous poly(caprolactone-b-lactide)

This study focuses on the aggregation behavior of the biodegradable amphiphilic block copolymers based on methoxy poly(ethylene glycol) (mPEG) as a hydrophilic block and either crystalline poly(caprolactone-b-l-lactide) (P(CL-LLA)) or amorphous poly(caprolactone-b-D,L-lactide) (P(CL-DLLA)) as a hydrophobic block. These block copolymers have a strong tendency to form micelles in aqueous medium, with very low critical micelle concentrations (CMCs). The CMC of P(CL-LLA)-b-mPEG is higher than that of P(CL-DLLA)-b-mPEG when the mPEG block has the same molecular weight. Furthermore, the partition equilibrium coefficient (K(v)) of pyrene in the micellar solution of P(CL-LLA)-b-mPEG copolymer was lower than that of P(CL-DLLA)-b-mPEG copolymer when the mPEG block was the same length. These differences were believed to be related to the physical state of the core-forming blocks, i.e., the crystalline P(CL-LLA) block and the amorphous P(CL-DLLA) block. The TEM images showed that micelles formed by P(CL-LLA)-b-mPEG assembled in a cylindrical morphology, whereas those formed by P(CL-DLLA)-b-mPEG took a classical spherical shape. In addition, with differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) analyses, it is believed that the crystallization tendency of the core-forming blocks is the main factor governing the morphology of micelles in water. A possible mechanism for the cylindrical assembly morphology was discussed.     

Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

Acceleration of enzymatic reaction of trypsin through the formation of water-soluble complexes with poly(ethylene glycol)-block-poly(alpha,beta-aspartic acid)

The amidase activity of bovine pancreas trypsin in water-soluble complexes with poly(ethylene glycol)-block-poly(alpha,beta-aspartic acid) (PEG-PAA) was evaluated by a colorimetric assay using L-lysine p-nitroanilide as a substrate. The enzymatic reaction of trypsin was accelerated through the complexation with PEG-PAA. By determining the kinetic parameters of the enzymatic reaction of trypsin, it was confirmed that the catalytic rate constant of the complexed trypsin was 15 times higher than that of the native trypsin. From the evaluation of pH dependence of initial reaction rate, it was indicated that this acceleration was induced by a stabilization of the imidazolium ion of the His residue in the catalytic site, the Asp-His-Ser triad, of trypsin due to the Asp units of PEG-PAA. The hydrogen bonded Asp-His pairs are critical constituents in several key enzymatic reactions including serine protease and apurinic endonucleases, and it was expected that the acceleration of the catalytic reaction might occur for other enzymes by the formation of water-soluble complexes with PEG-PAA.     

Synthesis and bioactivities of poly(ethylene glycol)–chitosan hybrids

Poly(ethylene glycol)–chitosan hybrids of various molecular weights having different degree of substitution were synthesized, by reductive N-alkylation of chitosan with poly(ethylene glycol) aldehyde, to study their bioactivities. The influence of these chitosan derivatives on the reactive oxygen species generation from canine polymorphonuclear leukocyte cells was investigated in vitro by chemiluminescence response. Reactive oxygen species generation by the influence of poly(ethylene glycol)–chitosan hybrids was decreased with the increase of degree of substitution. The reduction of interaction of poly(ethylene glycol)–chitosan hybrids with polymorphonuclear leukocyte cells might be caused by the decrease of amino group in chitosan main chain and increase of the steric hindrance by poly(ethylene glycol) chain. The influence of the poly(ethylene glycol)–chitosan hybrids on complement component C3 activation was investigated by single radial immunodiffusion method. Influence on complement component C3 activation by poly(ethylene glycol)–chitosan hybrids was almost same as chitosan.     

生物可降解聚乙二醇-嵌段-聚乳酸的协同给药研究

肿瘤单一药物治疗的效果往往不佳,且易产生耐药性,因此,肿瘤的多药协同治疗具有明显优势,并逐渐引起重视。本工作基于具有良好生物相容性和生物可降解性的聚乙二醇-嵌段-聚乳酸(PEG-b-PLA)两嵌段聚合物,物理包埋两种化疗药物,阿霉素(Doxorubicin,DOX)和喜树碱(Camptothecin,CPT),实现两种化疗药物的共传输、药物释放与协同给药,表现出良好的抗肿瘤活性。     

Compatibilization effect of poly(epsilon-caprolactone)-b-poly(ethylene glycol) block copolymers and phase morphology analysis in immiscible poly(lactide)/poly(epsilon-caprolactone) blends

The miscibility and phase behavior of two stereoisomer forms of poly(lactide) (PLA: poly (L-lactide) (PLLA) and poly(DL-lactide) (PDLLA)) blends with poly(epsilon-caprolactone)-b-poly(ethylene glycol) (PCL-b-PEG) and PCL-b-monomethoxy-PEG (PCL-b-MPEG) block copolymers have been investigated by differential scanning calorimetry (DSC). The DSC thermal behavior of both the blend systems revealed that PLA is miscible with the PEG segment phase of PCL-b-(M)PEG but is still immiscible with its PCL segment phase although PCL was block-copolymerized with PEG. On the basis of these results, PCL-b-PEG was added as a compatibilizer to PLA/PCL binary blends. The improvement in mechanical properties of PLA/PCL blends was achieved as anticipated upon the addition of PCL-b-PEG. In addition, atomic force microscopy (AFM) measurements have been performed in order to study the compositional synergism to be observed in mechanical tests. AFM observations of the morphological dependency on blend composition indicate that PLA/PCL blends are immiscible but compatible to some extent and that synergism of compatibilizing may be maximized in the compositional blend ratio before apparent phase separation and coarsening.     

Polylactones 57. Biodegradable networks based on A-B-A triblock segments containing poly(ethylene glycol)s-syntheses and drug release properties

Condensation of Bu(2)Sn(OMe)(2) with poly(ethylene glycol)s yielded macrocyclic tin alkoxides which were, in turn, used as cyclic initiators for the ring-expansion polymerization of epsilon-caprolactone, D,L-lactide, or trimethylene carbonate. The resulting cyclic triblock copolymers were in situ cross-linked with trimesoyl chloride. The lengths of the A-B-A triblock segments were varied via the monomer-initiator ratio (M/I) or via the lengths of the poly(ethylene glycol)s. After extraction with CH(2)Cl(2), the isolated networks were characterized by (1)H NMR spectroscopy, DSC measurements, and swelling experiments. The release of dexamethasone and 5-fluorouracil from two triblock networks was studied in physiological buffer solutions at 37 degrees C over a period of several weeks. A strong initial burst was found in all cases. Only a weak initial burst and a more continuous release was observed when networks of random L-lactide/epsilon-caprolactone copolymers were studied under the same conditions.     

Single crystals of poly(L-glutamic acid)

Lamellar single crystals of alkaline earth salts of poly(L -glutamic acid) have been grown by precipitation from dilute aqueous solution and studied by optical and electron microscopy and by x-ray and electron diffraction. The calcium, strontium and barium salts were crystallized in the β form above room temperature and could be converted to crystals of β-poly(L -glutamic acid) by washing in dilute hydrochloric acid. The magnesium salt, on the other hand, was crystallized in the α form at or below room temperature but could not be converted into crystals of α-poly(L -glutamic acid) by washing in hydrochloric acid. The crystalline lamellae are very thin (thicknesses range from 25 to 60 Å in β crystals and are about 100 Å in α crystals) and the polypeptide chains are oriented normal to the planes of the lamellae. It is clear from the disparity between crystal thickness and molecular length that the molecules crystallize by folding at the upper and lower surfaces of the crystals. Conformations of the molecules at these folds are discussed briefly.     

Self-assembled poly(butadiene)-b-poly(ethylene oxide) polymersomes as paclitaxel carriers

In this work, self-assembled poly(butadiene)-b-poly(ethylene oxide) (PB-PEO) polymersomes (polymer vesicles) and worm micelles were evaluated as paclitaxel carriers. Paclitaxel was successfully incorporated into PB-PEO polymersomes and worm micelles. The loading capacity of paclitaxel inside PB-PEO colloids ranged from 6.7% to 13.7% w/w, depending on the morphology of copolymer colloids and the molecular weight of diblock copolymer. Paclitaxel loaded OB4 (PB219-PEO121) polymersome formulations were colloidally stable for 4 months at 4 degrees C and exhibited slow steady release of paclitaxel over a 5 week period at 37 degrees C. Evaluation of the in vitro cytotoxicity of paclitaxel-polymersome formulations showed that the ability of paclitaxel-loaded polymersomes to inhibit proliferation of MCF-7 human breast cancer cells was less compared to paclitaxel alone. By increasing the concentration of paclitaxel in polymersomes from 0.02 to 0.2 mug/mL, paclitaxel-polymersome formulations showed comparable activity in inhibiting the growth of MCF-7 cells. Taken together, these results demonstrate that paclitaxel-polymersomes have desirable restrained release profile and exhibit long-term stability.     

Physiochemical properties of low and high molecular weight poly(ethylene glycol)-grafted poly(ethylene imine) copolymers and their complexes with oligonucleotides

Inefficient delivery of antisense oligonucleotides (AOs) to target cell nuclei remains as the foremost limitation to their usefulness. Copolymers of cationic poly(ethylene imine) (PEI) and poly(ethylene glycol) (PEG) have been well-studied for delivery of plasmids. However, the properties of PEG-PEI-AO polyplexes have not been comprehensively investigated. Therefore, we synthesized a series of PEG-PEI copolymers and evaluated their physiochemical properties alone and when complexed with AO. The M(w) of PEG was found to be the main determinant of polyplex size, via its influence on particle aggregation. DLS measurements showed that when PEG5000 was grafted to PEI2K and PEI25K, polyplex diameters were extremely small (range 10-90 nm) with minimal aggregation. In contrast, when PEG550 was grafted to PEI2K and PEI25K, polyplexes appeared as much larger aggregates (approximately 250 nm). As expected, the surface charge (zeta potential) was higher for polyplexes containing PEI25K than those containing PEI2K, but decreased with increased levels of PEG grafting. Surprisingly, within the physiological range (pH 7.5-5), the buffering capacity of all copolymers was nearly equivalent to that of unsubstituted PEI2K or PEI25K, and was barely influenced by PEGylation. The stability of polyplexes was evaluated using a heparin polyanion competition assay. Unexpectedly, polyplexes containing PEI2K showed stability equal to or greater than that of PEI25K polyplexes. The level of PEG grafting also had a dramatic effect on polyplex stability. The relationships established between molecular formulations and polyplex size, aggregation, surface charge, and stability should provide a useful guide for future studies aimed at optimizing polymer-mediated AO delivery in cell and animal studies. A summary of the relationships between polyplex structures and recent studies of their transfection capacity is provided.     

Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol)

We are reporting alternating multiblock copolymers of poly(L-lactic acid)/poly(ethylene glycol) aqueous solution (> 15 wt %) undergoing sol-gel-sol transition as the temperature increases from 20 to 60 degrees C. Micelles of the multiblock copolymers (in water) are about 20 nm in radius at low temperature. They are aggregated to a larger size as the temperature increases, which should play a critical role in the sol-to-gel transition. The transition temperature and gel window were affected by the molecular weight and composition of the multiblock copolymer. In particular, the aqueous solution of an alternating multiblock copolymer (Mn approximately 6700 daltons) prepared from poly(ethylene glycol) (Mn approximately 600 daltons) and poly(L-lactic acid) (Mn approximately 1300 daltons) showed a maximum modulus at body temperature (37 degrees C). The in situ gel forming ability of the polymer aqueous solution in vivo as well as in vitro indicates that it can be a promising injectable biomaterial.     

Synthesis of anionic poly(ethylene glycol) derivative for chitosan surface modification in blood-contacting applications

To improve blood compatibility, chitosan surface was modified by the complexa-tion-interpenetration method using an anionic derivative of poly(ethylene glycol) (PEG). Methoxypoly(ethylene glycol) sulfonate (MPEG sulfonate)-modified chitosan was prepared by allowing the base polymer to swell in an acidic medium, followed by polyelectrolyte complexation and interpenetration of MPEG sulfonate with the chitosan matrix. Addition of a strong base collapsed the base polymer to permanently immobilize the modifying agent on the surface. Electron spectroscopy for chemical analysis (ESCA) confirmed the presence of MPEG sulfonate on chitosan and the high resolution Cls peak showed an increase in -C—O- which is indicative of the ethylene oxide residues. The number of adherent platelets and the extent of platelet activation was significantly reduced on MPEG sulfonate-modified chitosan. Compared to an average of more than 66 fully activated platelets on unmodified chitosan surface, only 3.0 contact-adherent platelets were present on MPEG sulfonate-modified chitosan. Plasma recalcification time, a measure of the intrinsic coagulation reaction, was about 11.5 min in contact with modified chitosan. The results of this study show that chitosan surface can be modified by the complexation-interpenetration method with anionic PEG derivative. Surface-immobilized MPEG sulfonate was effective in preventing plasma protein adsorption and platelet adhesion and activation by the steric repulsion mechanism.     

Synthesis and self-assembly of well-defined poly(amino acid) end-capped poly(ethylene glycol) and poly(2-methyl-2-oxazoline)

Poly(ethylene glycol) (PEG) and poly(2-methyl-2-oxazoline) (PMOx) are water-soluble, biocompatible polymers with stealth hemolytic activities. Poly(amino acid) (PAA) end-capped PEG and PMOx were prepared using amino-terminated derivatives of PEG and PMOx as macroinitiators for the ring-opening polymerization of γ-benzyl protected l-glutamate N-carboxyanhydride and S-benzyloxycarbonyl protected l-cysteine N-carboxyanhydride, respectively, in the presence of urea, at room temperature. The molecular weight of the PAA moiety was kept between M(n) = 2200 and 3000 g mol(-1). PMOx was polymerized by cationic ring-opening polymerization resulting in molecular weights of M(n) = 5000 and 10,000 g mol(-1), and PEG was a commercial product with M(n) = 5000 g mol(-1). Here, we investigate the self-assembly of the resulting amphiphilic block copolymers in water and the effect of the chemical structure of the block copolymers on the solution properties of self-assembled nanostructures. The PEG-block-poly(amino acid), PEG-b-PAA, and PMOx-block-poly(amino acid), PMOx-b-PAA, block copolymers have a narrow and monomodal molecular weight distribution (PDI < 1.3). Their self-assembly in water was studied by dynamic light scattering and fluorescence spectroscopy. In aqueous solution, the block copolymers associate into particles with hydrodynamic radii (R(H)) ranging in size from R(H) 70 to 130 nm, depending on the block copolymer architecture and the polymer molecular weight. Larger R(H) and critical association concentration values were obtained for copolymers containing poly(S-benzyloxycarbonyl-l-cysteine) compared to their poly(γ-benzyl-L-glutamate) analogue. FTIR investigations revealed that the poly(γ-benzyl-L-glutamate) block adopts a helical conformation, while the poly(S-benzyloxycarbonyl-L-cysteine) block exists as β-sheet.     

Cellular internalization of poly(ethylene oxide)-b-poly(epsilon-caprolactone) diblock copolymer micelles

Poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) block copolymers self-assemble into micelles in aqueous solution. We have examined whether these micelles can internalize into P19 cells in vitro. Fluorescently labeled PEO(45)-b-PCL(23) block copolymer was prepared by conjugating a tetramethylrhodamine molecule to the end of the hydrophobic PCL block. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies yielded 24 +/- 2 and 25 +/- 2 nm, respectively, for the diameters of the micelles. The studies also showed that chemical labeling did not effect the morphology or size. When the rhodamine-labeled PEO(45)-b-PCL(23) block copolymer micelles were tested in vitro, time-, concentration-, and pH-dependence of the internalization process suggested that internalization proceeded by endocytosis. The results from these studies provide the first direct evidence for the internalization of PEO(45)-b-PCL(23) micelles. Future studies will utilize multiple labeling of these micelles, allowing questions to be addressed related to the fate of internalized micelles as drug carriers, the destination of the incorporated drugs or fluorescent probes released from micelles, and the identification of the subcellular localization of the whole drug-carrier system within cells, both in vitro and in vivo.     

Synthesis and unexpected reactivity of iron tris(bipyridine) complexes with poly(ethylene glycol) macroligands

High molecular weight poly(ethylene glycol) (PEG) derivatized iron tris(bipyridine) complexes, presenting hydroxyl end groups for further modification as bioconjugates, copolymers, or cross-linking agents, were synthesized via ring-opening anionic polymerization of ethylene oxide from hydroxyl-functionalized bipyridine (bpy) initiators and subsequent chelation to iron(II). Bpy-centered PEG macroligands (bpyPEG(2)) with molecular weights ranging from 4,000 to 17,000 and low polydispersity indices (<1.1) were obtained. Chelation of the bpyPEG(2) macroligands to iron(II) sulfate was studied in aqueous solution by titration and kinetics experiments, which revealed unexpected air sensitivity compared to nonpolymeric iron tris(bipyridine) complexes. Red-violet aqueous solutions of [Fe(bpyPEG(2))(3)](2+) begin to bleach within hours when exposed to air. Enhanced polymer degradation and gel formation of acrylate-modified bpyPEG(2) in the presence of Fe(2+) suggest that radicals may be involved. Under argon, the chromophores are stable. Polymeric iron complexes are slower to form and faster to degrade in air with increasing bpyPEG(2) molecular weight. These studies demonstrate the influence of molecular weight in polymeric iron tris(bipyridine) complex coordination chemistry and reactivity.