A 3D Homochiral MOF [Cd2(d‐cam)3]•2Hdma•4dma for HPLC Chromatographic Enantioseparation

Up to now, some chiral metal‐organic frameworks (MOFs) have been reported for enantioseparation in liquid chromatography. Here we report a homochiral MOF, [Cd2(d‐cam)3]·2Hdma·4dma, used as a new chiral stationary phase for high‐performance liquid chromatographic enantioseparation. Nine racemates of alcohol, naphthol, ketone, and base compounds were used as analytes for evaluating the separation properties of the chiral MOF packed column. Moreover, some effects such as mobile phase composition, column temperature, and analytes mass for separations on this chiral column also were investigated. The relative standard deviations for the resolution values of run‐to‐run and column‐to‐column were less than 2.1% and 3.2%, respectively. The experimental results indicate that the homochiral MOF offered good recognition ability, which promotes the application of chiral MOFs use as stationary phase for enantioseparation. Chirality 28:340–346, 2016. © 2016 Wiley Periodicals, Inc.     

Quinine‐Based Zwitterionic Chiral Stationary Phase as a Complementary Tool for Peptide Analysis: Mobile Phase Effects on Enantio‐ and Stereoselectivity of Underivatized Oligopeptides

Peptide stereoisomer analysis is of importance for quality control of therapeutic peptides, the analysis of stereochemical integrity of bioactive peptides in food, and the elucidation of the stereochemistry of peptides from a natural chiral pool which often contains one or more D‐amino acid residues. In this work, a series of model peptide stereoisomers (enantiomers and diastereomers) were analyzed on a zwitterionic ion‐exchanger chiral stationary phase (Chiralpak ZWIX(+) 5 µm), in order to investigate the retention and separation performance for such compounds on this chiral stationary phase and elucidate its utility for this purpose. The goal of the study focused on 1) investigations of the effects of the sample matrix used to dissolve the peptide samples; 2) optimization of the mobile phase (enabling deriving information on factors of relevance for retention and separation); and 3) derivation of structure–selectivity relationships. It turned out that small di‐ and tripeptides can be well resolved under optimized conditions, typically with resolutions larger than 1.5. The optimized mobile phase often consisted of methanol–tetrahydrofuran–water (49:49:2; v/v/v) with 25 mM formic acid and 12.5 mM diethylamine. This work proposes some guidance on which mobile phases can be most efficiently used for peptide stereoisomer separations on Chiralpak ZWIX. Chirality 28:5–16, 2016. © 2015 Wiley Periodicals, Inc.     

Metal–Organic Framework Templated Pd@PdO–Co3O4 Nanocubes as an Efficient Bifunctional Oxygen Electrocatalyst

The development of high‐efficiency bifunctional electrocatalyst for oxygen reduction and evolution reactions (ORR/OER) is critical for rechargeable metal–air batteries, a typical electrochemical energy storage and conversion technology. This work reports a general approach for the synthesis of Pd@PdO–Co₃O₄ nanocubes using the zeolite‐type metal–organic framework (MOF) as a template. The as‐synthesized materials exhibit a high electrocatalytic activity toward OER and ORR, which is comparable to those of commercial RuO₂ and Pt/C electrocatalysts, while its cycle performance and stability are much higher than those of commercial RuO₂ and Pt/C electrocatalysts. Various physicochemical characterizations and density functional theory calculations indicate that the favorable electrochemical performance of the Pd@PdO–Co₃O₄ nanocubes is mainly attributed to the synergistic effect between PdO and the robust hollow structure composed of interconnected crystalline Co₃O₄ nanocubes. This work establishes an efficient approach for the controlled design and synthesis of MOF‐templated hybrid nanomaterials, and provides a great potential for developing high‐performance electrocatalysts in energy storage and conversion.     

Chiral Ligand‐Exchange Resolution of Underivatized Amino Acids on a Dynamically Modified Stationary Phase for RP‐HPTLC

The synthesis of Spi(τ‐dec), derived from the selective alkylation of L‐spinacine (4,5,6,7‐tetrahydro‐1H‐imidazo[4,5‐c]pyridine‐6‐carboxylic acid) at the τ‐nitrogen of its heteroaromatic ring, with a linear hydrocarbon chain of 10 carbon atoms, is described here for the first time. Spi(τ‐dec) was successfully employed in the past to prepare home‐made chiral columns for chiral ligand‐exchange high‐performance liquid chromatography. In the present article a new method is described, using Spi(τ‐dec) as a chiral selector in high‐performance thin‐layer chromatography (HPTLC): commercial hydrophobic plates were first coated with Spi(τ‐dec) and then treated with copper sulfate. The performance of this new chiral stationary phase was tested against racemic mixtures of aromatic amino acids, after appropriate optimization of both the conditions of preparation of the plates and the mobile phase composition. The enantioselectivity values obtained for the studied compounds were higher than those reported in the literature for similar systems. The method employed here for the preparation of chiral HPTLC plates proved practical, efficient, and inexpensive. Chirality 26:313–318, 2014. © 2014 Wiley Periodicals, Inc.     

Flexible Quasi‐Solid‐State Sodium‐Ion Capacitors Developed Using 2D Metal–Organic‐Framework Array as Reactor

Achieving high‐performance Na‐ion capacitors (NICs) has the particular challenge of matching both capacity and kinetics between the anode and cathode. Here a high‐power NIC full device constructed from 2D metal–organic framework (MOFs) array is reported as the reactive template. The MOF array is converted to N‐doped mesoporous carbon nanosheets (mp‐CNSs), which are then uniformly encapsulated with VO₂ and Na₃V₂(PO₄)₃ (NVP) nanoparticles as the electroactive materials. By this method, the high‐power performance of the battery materials is enabled to be enhanced significantly. It is discovered that such hybrid NVP@mp‐CNSs array can render ultrahigh rate capability (up to 200 C, equivalent to discharge within 18 s) and superior cycle performance, which outperforms all NVP‐based Na‐ion battery cathodes reported so far. A quasi‐solid‐state flexible NIC based on the NVP@mp‐CNSs cathode and the VO₂@mp‐CNSs anode is further assembled. This hybrid NIC device delivers both high energy density and power density as well as a good cycle stability (78% retention after 2000 cycles at 1 A g^?1). The results demonstrate the powerfulness of MOF arrays as the reactor for fabricating electrode materials.     

Enantiomeric Separation of Bicyclo[2.2.2]octane‐Based 2‐Amino‐3‐Carboxylic Acids on Macrocyclic Glycopeptide Chiral Stationary Phases

Direct high‐performance liquid chromatographic (HPLC) separation of four bicyclo[2.2.2]octane based 2‐amino‐3‐carboxylic acid enantiomers were developed on chiral stationary phases (CSPs) containing different macrocyclic glycopeptide antibiotic selectors. The analyses were performed under reversed‐phase, polar organic and polar ionic mode on macrocyclic‐glycopeptide‐based Chirobiotic T, T2, TAG, and R columns. The effects of the mobile phase composition including the acid and base modifier, the structure of the analytes, and the temperature on the separations were investigated. Experiments were achieved at constant mobile phase compositions on different stationary phases in the temperature range 5–40°C. Thermodynamic parameters were calculated from plots of ln k or ln α versus 1/T. It was recognized that the enantioseparations in reversed‐phase and polar organic mode were enthalpically driven, but under polar‐ionic conditions entropically driven enantioseparation was observed as well. Baseline separation and determination of elution sequence were achieved in all cases. Chirality 26:200–208, 2014. © 2014 Wiley Periodicals, Inc.     

Metal–Organic Frameworks‐Derived Tunnel Structured Co3(PO4)2@C as Cathode for New Generation High‐Performance Al‐Ion Batteries

Despite great progress in aluminum ion batteries (AIBs), the commercialization and performance improvement of AIBs‐based carbon cathodes is greatly impeded by sluggish intercalation/extraction and redox kinetics due to large‐sized AlCl₄^? anions. Phosphates with tunnel channels and much larger d‐spacing than the radius of Al³⁺ could be an alternative candidate as a cathode for potential high‐performance AIBs. Herein, elaborately designed porous tunnel structured Co₃(PO₄)₂@C composites derived from ZIF‐67 as AIBs cathodes are demonstrated, showing increased active sites, high ionic mobility, and high Al³⁺ ion diffusion coefficient, leading to remarkably enhanced discharge–charge redox reaction kinetics. Furthermore, the carbon shell and porous structure performs as armor to alleviate volume change and maintain the structure integrity of the cathodes. As expected, the rationally constructed Co₃(PO₄)₂@C composite exhibits a superior capacity of 111 mA h g^?1 at a high current density of 6 A g^?1 and 151 mA h g^?1 at 2 A g^?1 after 500 cycles with capacity decay of 0.02% per cycle. This innovative strategy could be a big step forward for long‐term cycle stable AIBs and reveals significant insights into the redox reaction mechanism for high‐performance AIBs based on Al³⁺ rather than large‐sized AlCl₄^?.     

Solid‐phase extraction with metal–organic frameworks for the analysis of chiral compounds

Metal–organic frameworks (MOFs) are excellent porous materials with nanoscale cavities and high surface areas, which make them promising as novel adsorbents in solid‐phase extraction (SPE). In this article we report a new application of the chiral MOF [Zn₂(D‐Cam)₂(4,4′‐bpy)]_n in SPE used for the measurement of the enantiomeric excess (ee) of (±)‐1,1′‐bi‐2‐naphthol. Several important experimental parameters that may influence the extraction efficiency were investigated and optimized. Under the optimum conditions, a good linearity (R² > 0.999) was found between the ee value and the reciprocal of the peak areas. When compared with the actual ee measured using chiral HPLC, the SPE‐based assay also showed good accuracy and precision. The results showed that SPE based on chiral MOFs as adsorbents is a simple and effective method for the determination of the ee values of chiral compounds.     

NiFe‐Based Metal–Organic Framework Nanosheets Directly Supported on Nickel Foam Acting as Robust Electrodes for Electrochemical Oxygen Evolution Reaction

It is of great significance to develop highly efficient and superior stable oxygen evolution reaction (OER) electrocatalysts for upcoming electrochemical conversion technologies and clean energy systems. Here, an assembled 3D electrode is synthesized by a one‐step solvothermal process using such an original OER electrocatalyst. During the solvothermal process, Ni ions released from Ni foam in acidic solution and Fe ions added exogenously act as metal centers and coordinate with terephthalic acid (TPA) organic molecules by robust coordinate bonds, and finally, NiFe‐based metal–organic framework (MOF) nanosheets in situ grown on Ni foam, i.e., MIL‐53(FeNi)/NF, are prepared. This binder‐free 3D electrode shows superior OER activity with high current density (50 mA cm^?2) at an overpotential of 233 mV, a Tafel slope of 31.3 mV dec^?1, and excellent stability in alkaline aqueous solution (1 m KOH). It is discovered that introduction of Fe into MIL‐53 structure increases electrochemically‐active areas as well as reaction sites, accelerated electron transport capability, and modulated electronic structure to enhance catalytic performance. Besides, first principles calculations show that MIL‐53(FeNi) is more favorable for foreign atoms' adsorption and has increased 3d orbital electron density boosting intrinsic activity. This work elucidates a promising electrode for electrocatalysts and enriches direct application of MOF materials.     

Doping of [In2(phen)3Cl6]·CH3CN·2H2O Indium‐Based Metal–Organic Framework into Hole Transport Layer for Enhancing Perovskite Solar Cell Efficiencies

Perovskite solar cells (PSCs) have gained a promising position during the past few years. However, as far as it goes, there is rare combination of the merits of metal–organic framework with PSCs. In this work, a 3D metal–organic framework, namely, [In₂(phen)₃Cl₆]·CH₃CN·2H₂O (In2) is first introduced into hole transport material of PSCs through band alignment engineering. By this facile strategy, the pinholes in the hole transport layer are effectively reduced, and the migration of Au into the entire PSC structure can be alleviated simultaneously. Meanwhile, In2 also plays a role in enhancing the light absorption of perovskite, which is due to: (1) the large particles of In2 acting as light scattering centers; (2) the emission wavelength of In2 is almost the same as the excitation wavelength of perovskite. Consequently, short‐current density (J_sc), open circuit voltage (V_oc), and fill factor (FF) gain a significant increase from 19.53 to 21.03 mA cm^?2, 0.98 to 1.01 V, and 0.67 to 0.74, respectively. Thereby, the power conversion efficiency is remarkably enhanced from 12.8% to 15.8%. In the end, the stability of PSCs should also be improved.     

Development of HPLC Chiral Stationary Phases Based on (+)‐(18‐Crown‐6)‐2,3,11,12‐tetracarboxylic Acid and Their Applications

Crown ether‐based chiral stationary phases (CSPs) have been known to be useful for the resolution of racemic primary amino compounds. In particular, CSPs based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid have been reported to be useful for the resolution of secondary amino compounds as well as primary amino compounds. In this article, the process of developing various CSPs based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid to improve the chiral recognition efficiency and/or the stability of the CSPs and their applications to the resolution of various primary and nonprimary amino compounds are reviewed. Chirality 27:576–588, 2015. © 2015 Wiley Periodicals, Inc.     

Screening Approach for Chiral Separation of β‐Aminoketones by HPLC on Various Polysaccharide‐Based Chiral Stationary Phases

Nine β‐aminoketones were synthesized via Mannich reaction when benzaldehyde was condensed with some primary amines and acetophenone. The purified compounds were identified by using spectroscopic methods. The enantiomeric separation of these derivatives was carried out by high‐performance liquid chromatography (HPLC) using several coated and immobilized polysaccharide stationary phases, namely, Chiralcel^® OD‐H, Chiralcel^® OD, Chiralcel^® OJ, Chiralpak^® AD, Chiralpak^® IA, and Chiralpak^® IB using different mobile phases composed of n‐hexane and alcohol mixed in various ratios or pure ethanol or isopropanol. The retention behavior and selectivity of these chiral stationary phases were examined in isocratic normal phase mode. The results indicate that cellulose derivatives have higher enantioselectivity than amylose derivatives for the separation of racemic β‐amino ketones. Chirality 27:332–338, 2015. © 2015 Wiley Periodicals, Inc.     

Unusual Temperature‐Induced Retention Behavior of Constrained β‐Amino Acid Enantiomers on the Zwitterionic Chiral Stationary Phases ZWIX(+) and ZWIX(–)

The effects of temperature on the chiral recognition of cyclic β‐amino acid enantiomers on zwitterionic [Chiralpak ZWIX(+) and ZWIX(–)] chiral stationary phases were investigated. Experiments were performed at different mobile phase compositions and under 10°C column temperature increments in the temperature range 10–50°C. Apparent thermodynamic parameters and T_iso values were calculated from plots of ln k and ln α versus 1/T, respectively. Unusual temperature behavior was observed, especially on the ZWIX(–) column, where the application of MeOH/MeCN (50/50 v/v) containing 25 mM triethylamine and 50 mM formic acid as mobile phase led to nonlinear van't Hoff plots and increasing retention time with increasing temperature. On both columns, both enthalpically and entropically driven separations were observed. Chirality 26:385–393, 2014. © 2014 Wiley Periodicals, Inc.     

High‐Performance Liquid Chromatographic Enantioseparation of Cyclic β‐Amino Acids on Zwitterionic Chiral Stationary Phases Based on Cinchona Alkaloids

Stereoselective high‐performance liquid chromatographic separations of eight sterically constrained cyclic β‐amino acid enantiomer pairs were carried out using the newly developed Cinchona alkaloid‐based zwitterionic chiral stationary phases Chiralpak ZWIX(+) and ZWIX(?). The effects of the mobile phase composition, the nature and concentrations of the acid and base additives, the counterions and temperature on the separations were investigated. The changes in standard enthalpy, Δ(ΔH°), entropy, Δ(ΔS°), and free energy, Δ(ΔG°), were calculated from the linear van't Hoff plots derived from the ln α vs. 1/T curves in the studied temperature range (10–50°C). The values of the thermodynamic parameters depended on the nature of the selectors and the structures of the analytes. Unusual temperature behavior was observed on the ZWIX(?) column: decreased retention times were accompanied by increased separation factors with increasing temperature. On the ZWIX(+) column only enthalpically, whereas on the ZWIX(?) column both enthalpically and entropically driven separations were observed. The elution sequence was determined in all cases and was observed to be the opposite on ZWIX(+) and on ZWIX(?). Chirality 27:563–570, 2015. © 2015 Wiley Periodicals, Inc.