Construction of a Pichia pastoris cell-surface display system using Flo1p anchor system

A Pichia pastoris cell-surface display system was constructed using a Flo1p anchor system, which was developed in Saccharomyces cerevisiae. The lipase from Rhizopus oryzae with a pro sequence (ProROL) was used as the model protein and was genetically fused to the anchor consisting of amino acids 1-1099 of Flo1p (FS anchor). The resulting fusion protein FSProROL was expressed under the control of the alcohol oxidase 1 promoter (pAOX1). The fluorescence microscopy of immunolabeled P. pastoris cells revealed that ProROL was displayed on the cell surface, and Western blot analysis revealed that the fusion protein FSProROL was noncovalently attached to the cell wall and highly glycosylated. The lipase activity of P. pastoris cells was affected by the methanol concentration for the induction phase. Surprisingly, the activity of lipase displayed on the cells incubated at 60 degrees C was not only stable but also increased to about 6.5 times the initial value after 4 h incubation.     

Construction of Yeast Strains with High Cell Surface Lipase Activity by Using Novel Display Systems Based on the Flo1p Flocculation Functional Domain

We constructed a novel cell-surface display system, using as a new type of cell-wall anchor 3,297 or 4,341 bp of the 3′ region of the FLO1 gene (FS or FL gene, respectively), which encodes the flocculation functional domain of Flo1p. In this system, the N terminus of the target protein was fused to the FS or FL protein and the fusion proteins were expressed under the control of the inducible promoter UPR-ICL (5′ upstream region of the isocitrate lyase of Candida tropicalis). Using this new system, recombinant lipase with a pro sequence from Rhizopus oryzae (rProROL), which has its active site near the C terminus, was displayed on the cell surface. Cell-surface display of the FSProROL and FLProROL fusion proteins was confirmed by immunofluorescence microscopy and immunoblotting. Lipase activity reached 145 IU/liter (61.3 IU/g [dry cell weight]) on the surface of the yeast cells, which successfully catalyzed the methanolysis reaction. Using these whole-cell biocatalysts, methylesters synthesized from triglyceride and methanol reached 78.3% after 72 h of reaction. To our knowledge, this is the first example of cell-surface display of lipase with high activity. Interestingly, the yeast cells displaying the FLProROL protein showed strong flocculation, even though the glycosylphosphatidylinositol anchor attachment signal and cell-membrane-anchoring region of Flo1p had been deleted from this gene. The cell-surface display system based on FL thus endows the yeast strain with both novel enzyme display and strong flocculation ability.     

Construction of yeast strains with high cell surface lipase activity by using novel display systems based on the Flo1p flocculation functional domain

We constructed a novel cell-surface display system, using as a new type of cell-wall anchor 3,297 or 4,341 bp of the 3' region of the FLO1 gene (FS or FL gene, respectively), which encodes the flocculation functional domain of Flo1p. In this system, the N terminus of the target protein was fused to the FS or FL protein and the fusion proteins were expressed under the control of the inducible promoter UPR-ICL (5' upstream region of the isocitrate lyase of Candida tropicalis). Using this new system, recombinant lipase with a pro sequence from Rhizopus oryzae (rProROL), which has its active site near the C terminus, was displayed on the cell surface. Cell-surface display of the FSProROL and FLProROL fusion proteins was confirmed by immunofluorescence microscopy and immunoblotting. Lipase activity reached 145 IU/liter (61.3 IU/g [dry cell weight]) on the surface of the yeast cells, which successfully catalyzed the methanolysis reaction. Using these whole-cell biocatalysts, methylesters synthesized from triglyceride and methanol reached 78.3% after 72 h of reaction. To our knowledge, this is the first example of cell-surface display of lipase with high activity. Interestingly, the yeast cells displaying the FLProROL protein showed strong flocculation, even though the glycosylphosphatidylinositol anchor attachment signal and cell-membrane-anchoring region of Flo1p had been deleted from this gene. The cell-surface display system based on FL thus endows the yeast strain with both novel enzyme display and strong flocculation ability.     

Development of yeast cells displaying <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase B and their application to ester synthesis reaction

We isolated the lipase B from Candida antarctica CBS 6678 (CALB CBS6678) and successfully constructed CALB-displaying yeast whole-cell biocatalysts using the Flo1p short (FS) anchor system. For the display of CALB on a yeast cell surface, the newly isolated CALB CBS6678 exhibited higher hydrolytic and ester synthesis activities than the well-known CALB, which is registered in GenBank (Z30645). A protease accessibility assay using papain as a protease showed that a large part of CALB, approximately 75%, was localized on an easily accessible part of the yeast cell surface. A comparison of the lipase hydrolytic activities of yeast whole cells displaying only mature CALB (CALB) and those displaying mature CALB with a Pro region (ProCALB) revealed that mature CALB is preferable for yeast cell surface display using the Flo1p anchor system. Lyophilized yeast whole cells displaying CALB were applied to an ester synthesis reaction at 60°C using adipic acid and n-butanol as substrates. The amount of dibutyl adipate (DBA) produced increased with the reaction time until 144 h. This indicated that CALB displayed on the yeast cell surface retained activity under the reaction conditions.     

Long anchor using Flo1 protein enhances reactivity of cell surface-displayed glucoamylase to polymer substrates

We investigated the influence of anchor length on the reactivity to polymer substrate of enzyme displayed on yeast cell surfaces. Using various lengths [42, 102, 146, 318, 428, and 1,326 amino acids (aa)] of the C-terminal region of the Saccharomyces cerevisiae Flo1 protein (Flo1p), which plays a major role in yeast flocculation, six display systems with various anchor lengths were constructed. In these systems, the target protein was displayed on the yeast cell surface under the control of the 5'-upstream region of the isocitrate lyase gene of Candida tropicalis ( UPR-ICL). Cell-surface display of Rhizopus oryzae glucoamylase by these systems was induced and confirmed in all systems by immunofluorescence microscopy and immunoblotting. Flow-cytometer measurement of the fluorescence intensity of immunofluorescence-labeled yeast cells displaying glucoamylase indicated that glucoamylase displayed with longer anchors, especially those of 428 and 1,326 aa in length, had higher reactivity to antibodies. The reactivity of starch to displayed glucoamylase, which was evaluated by plate assay, increased with anchor length, as did the cell growth-rate in starch-containing medium. These results indicate that cell-surface display systems using 428- and 1,326-aa length anchors of Flo1p are effective for the display of enzymes on the outer surface of yeast cells.     

Displaying Lipase B from Candida antarctica in Pichia pastoris Using the Yeast Surface Display Approach: Prospection of a New Anchor and Characterization of the Whole Cell Biocatalyst

Yeast Surface Display (YSD) is a strategy to anchor proteins on the yeast cell wall which has been employed to increase enzyme stability thus decreasing production costs. Lipase B from Candida antarctica (LipB) is one of the most studied enzymes in the context of industrial biotechnology. This study aimed to assess the biochemical features of this important biocatalyst when immobilized on the cell surface of the methylotrophic yeast Pichia pastoris using the YSD approach. For that purpose, two anchors were tested. The first (Flo9) was identified after a prospection of the P. pastoris genome being related to the family of flocculins similar to Flo1 but significantly smaller. The second is the Protein with Internal Repeats (Pir1) from P. pastoris. An immunolocalization assay showed that both anchor proteins were able to display the reporter protein EGFP in the yeast outer cell wall. LipB was expressed in P. pastoris fused either to Flo9 (FLOLIPB) or Pir1 (PIRLIPB). Both constructions showed hydrolytic activity towards tributyrin (>100 U/mg_dcw and >80 U/mg_dcw, respectively), optimal hydrolytic activity around 45°C and pH 7.0, higher thermostability at 45°C and stability in organic solvents when compared to a free lipase.     

Combination of site-directed mutagenesis and yeast surface display enhances <Emphasis Type="Italic">Rhizomucor miehei</Emphasis> lipase esterification activity in organic solvent

To increase the activity of Rhizomucor miehei lipase (RML) in organic solvent, multiple sequence alignments and rational site-directed mutagenesis were used to create RML variants. The obtained proteins were surface-displayed on Pichia pastoris by fusion to Flo1p as an anchor protein. The synthetic activity of four variants showed from 1.1- to 5-fold the activity of native lipase in an esterification reaction in heptane with alcohol and caproic acid as substrates. The increase in esterification activity may be attributed to the four mutations changing the flexibility of RML or facilitating the reaction. In conclusion, this method demonstrated that multiple sequence alignments and rational site-directed mutagenesis combined with yeast display technology is a faster and more effective means of obtaining high-efficiency esterification lipase variants compared with previous similar methods.     

Enzyme-based glucose delivery as a high content screening tool in yeast-based whole-cell biocatalysis

The influence of glucose release on growth and biotransformation of yeasts was examined by using the medium EnBase^® Flo in shake flasks. The medium contains a polysaccharide acting as substrate, which is degraded to glucose by the addition of an enzyme. In the present paper, this medium was adapted for the cultivation of yeasts by increasing the complex components (booster) and the enzyme concentrations to guarantee a higher glucose release rate. Important changes were an increase of the complex component booster to 10–15% and an increased glucose release by increasing the enzyme content to 15 U L^?1. The 20 yeasts investigated in the present work showed an improvement of growth and biomass production when cultivated with the EnBase medium in comparison to yeast extract dextrose (YED) medium. Values of optical densities (OD₆₀₀) of approximately 40 AU (corresponding to over 60 g L^?1 wet cell weight) were achieved for all 20 yeast strains tested. During the following screening of the yeasts in whole-cell biotransformation, an improvement of the conversion for 19 out of the 20 yeasts cultivated with the EnBase Flo medium could be observed. The biomass from the EnBase Flo cultivation showed a higher conversion activity in the reduction of 2-butanone to (R/S)-2-butanol. The enantioselectivity (ee) of 15 yeast strains showed an improvement by using the EnBase medium. The number of yeasts with an ee >97% increased from zero with YED to six with EnBase medium. Thus, the use of a glucose release cultivation strategy in the screening process for transformation approaches provides significant benefits compared to standard batch approaches.     

高效絮凝素毕赤酵母表面展示系统的构建

为了获得高效的脂肪酶毕赤酵母表面展示系统,利用来自酿酒酵母絮凝素蛋白Flo1的N端874个氨基酸残基(FS)和C端的1101个氨基酸残基(FL)作为锚定蛋白分别构建了2套载体系统.带有前肽的米黑根毛霉脂肪酶(ProRML)克隆到构建的2套展示载体中,使米黑根毛霉脂肪酶(RML)分别以N端锚定或C端锚定的方式实现在毕赤酵母细胞表面的展示.利用RMLC端的Flag标签,通过流式细胞术和激光扫描共聚焦显微镜检测2套系统中RML在酵母表面的展示情况.研究发现,N端锚定于酵母表面的展示酶FSR以pNPC为底物时,水解活力达到了105.3U/g,大约为C端锚定的展示酶FLR活力的2倍.同时FSR比FLR具有更宽的温度、pH作用范围和更好的热稳定性.与游离酶和固定化酶相比,展示酶FSR也表现出更为优良的热稳定性.结果提示,基于Flo1N端锚定的展示系统更适合展示活性中心近C端的脂肪酶,推动了展示酶的进一步研究和开发.     

Improvement in organophosphorus hydrolase activity of cell surface-engineered yeast strain using Flo1p anchor system

Organophosphorus hydrolase (OPH) hydrolyzes organophosphorus esters. We constructed the yeast-displayed OPH using Flo1p anchor system. In this system, the N-terminal region of the protein was fused to Flo1p and the fusion protein was displayed on the cell surface. Hydrolytic reactions with paraoxon were carried out during 24 h of incubation of OPH-displaying cells at 30°C. p-Nitrophenol produced in the reaction mixture was detected by HPLC. The strain with highest activity showed 8-fold greater OPH activity compared with cells engineered using glycosylphosphatidylinositol anchor system, and showed 20-fold greater activity than Escherichia coli using the ice nucleation protein anchor system. These results indicate that Flo1p anchor system is suitable for display of OPH in the cell surface-expression systems.     

Display of Candida antarctica lipase B on Pichia pastoris and its application to flavor ester synthesis

Two alternative cell-surface display systems were developed in Pichia pastoris using the α-agglutinin and Flo1p (FS) anchor systems, respectively. Both the anchor cell wall proteins were obtained originally from Saccharomyces cerevisiae. Candida antarctica lipase B (CALB) was displayed functionally on the cell surface of P. pastoris using the anchor proteins α-agglutinin and FS. The activity of CALB displayed on P. pastoris was tenfold higher than that of S. cerevisiae. The hydrolytic and synthetic activities of CALB fused with α-agglutinin and FS anchored on P. pastoris were investigated. The hydrolytic activities of both lipases displayed on yeast cells surface were more than 200 U/g dry cell after 120 h of culture (200 and 270 U/g dry cell, respectively). However, the synthetic activity of CALB fused with α-agglutinin on P. pastoris was threefold higher than that of the FS fusion protein when applied to the synthesis of ethyl caproate. Similarly, the CALB displayed on P. pastoris using α-agglutinin had a higher catalytic efficiency with respect to the synthesis of other short-chain flavor esters than that displayed using the FS anchor. Interestingly, for some short-chain esters, the synthetic activity of displaying CALB fused with α-agglutinin on P. pastoris was even higher than that of the commercial CALB Novozyme 435.     

Enhancement of activity of lipase-displaying yeast cells and their application to optical resolution of (R,S)-1-benzyloxy-3-chloro-2-propyl monosuccinate

Rhizopus oryzae lipase (ROL) was displayed on the cell surface of Saccharomyces cerevisiae via the Flo1 N-terminal region (1100 amino acids), which corresponds to a flocculation functional domain. The activity of lipase-displaying yeast whole-cell biocatalysts was enhanced 7.3-fold by incubation of the yeast cells at 20 degrees C in distilled water for 8 days after 8 day cultivation. The amount of lipase molecules present in cell wall and intracellular fractions was found to be increased 4.5- and 1.8-fold, respectively, by incubation, which proves that ROL molecules are expressed during incubation. The ROL-displaying yeast whole-cell biocatalyst with enhanced activity was successfully catalyzed by optical resolution of the pharmaceutical precursor (R,S)-1-benzyloxy-3-chloro-2-propyl monosuccinate. Moreover, it showed stable activity through at least eight reaction cycles. These results demonstrate that ROL-displaying yeast cells with enhanced activity by incubation in distilled water are very effective in industrial bioconversion processes.     

Cell Surface Expression of Bacterial Esterase A by Saccharomyces cerevisiae and Its Enhancement by Constitutive Activation of the Cellular Unfolded Protein Response

Yeast cell surface display is a powerful tool for expression and immobilization of biocatalytically active proteins on a unicellular eukaryote. Here bacterial carboxylesterase EstA from Burkholderia gladioli was covalently anchored into the cell wall of Saccharomyces cerevisiae by in-frame fusion to the endogenous yeast proteins Kre1p, Cwp2p, and Flo1p. When p-nitrophenyl acetate was used as a substrate, the esterase specific activities of yeast expressing the protein fusions were 103 mU mg⁻¹ protein for Kre1/EstA/Cwp2p and 72 mU mg⁻¹ protein for Kre1/EstA/Flo1p. In vivo cell wall targeting was confirmed by esterase solubilization after laminarinase treatment and immunofluorescence microscopy. EstA expression resulted in cell wall-associated esterase activities of 2.72 U mg⁻¹ protein for Kre1/EstA/Cwp2p and 1.27 U mg⁻¹ protein for Kre1/EstA/Flo1p. Furthermore, esterase display on the yeast cell surface enabled the cells to effectively grow on the esterase-dependent carbon source glycerol triacetate (Triacetin). In the case of Kre1/EstA/Flo1p, in vivo maturation within the yeast secretory pathway and final incorporation into the wall were further enhanced when there was constitutive activation of the unfolded protein response pathway. Our results demonstrate that esterase cell surface display in yeast, which, as shown here, is remarkably more effective than EstA surface display in Escherichia coli, can be further optimized by activating the protein folding machinery in the eukaryotic secretion pathway.     

Composition of fats,produced by lipomyces starkeyi,under various conditions

Summary The yeast Lipomyces starkeyi was grown in liquid media with different carbon sources. The quantity of fat formed in the yeast cells amounted to 55% of the weight of dry yeast with molasses and to 35% with glucose as the carbon source. The composition of the fat, synthesized by the yeast, did not change very much on using different carbon sources. The main components were oleic and palmitic acid; stearic, linoleic and palmitoleic acid were present in lower concentrations.During cultivation, however, there was a change in the composition of the mixture of acids obtained from the yeast fat. The percentage of linoleic acid decreased from 10% to 2.0%, while oleic acid increased from 47% to 62%.The CoA content of the fat synthesizing cells during cultivation was ca. 95 units for a short period, but in general it did not exceed 30–40 units per gram dry yeast.     

HIV-1 gp41的酵母表面展示及表达优化

以His标签检测蛋白的表达, 利用酿酒酵母表面展示系统, 成功地将HIV-1 gp41片段锚定在酵母表面, 并检测到gp41的活性。以pMD18T-gp41为模板, 通过PCR技术克隆了gp41基因, 将gp41基因通过双酶切连接到载体pICAS-His上,构建了gp41酵母表面展示载体, 并将其转化至酿酒酵母(Saccharomyces cerevisiae)MT8-1中。重组菌经培养, 利用免疫荧光染色方法进行染色, 显微镜观察发现重组酵母细胞表面有绿色荧光, 流式细胞仪结果进一步证实gp41正确折叠展示于酵母细胞表面。采用不同浓度的葡萄糖培养基进行表达优化。当葡萄糖浓度为1%时, 82.46%的酵母细胞表达了gp41抗原; 随着葡萄糖浓度升高, 蛋白表达受到抑制。     

HIV-1 gp41的酵母表面展示及表达优化

以His标签检测蛋白的表达, 利用酿酒酵母表面展示系统, 成功地将HIV-1 gp41片段锚定在酵母表面, 并检测到gp41的活性。以pMD18T-gp41为模板, 通过PCR技术克隆了gp41基因, 将gp41基因通过双酶切连接到载体pICAS-His上,构建了gp41酵母表面展示载体, 并将其转化至酿酒酵母(Saccharomyces cerevisiae)MT8-1中。重组菌经培养, 利用免疫荧光染色方法进行染色, 显微镜观察发现重组酵母细胞表面有绿色荧光, 流式细胞仪结果进一步证实gp41正确折叠展示于酵母细胞表面。采用不同浓度的葡萄糖培养基进行表达优化。当葡萄糖浓度为1%时, 82.46%的酵母细胞表达了gp41抗原; 随着葡萄糖浓度升高, 蛋白表达受到抑制。     

Expression of a lipase on the cell-surface of Escherichia coli using the OmpW anchoring motif and its application to enantioselective reactions

Microbial-surface display is the expression of proteins or peptides on the surface of cells by fusing an appropriate protein as an anchoring motif. Here, the outer membrane protein W (OmpW) was selected as a fusion partner for functional expression of Pseudomonas fluorescence SIK W1 lipase (TliA) on the cell-surface of Escherichia coli. Localization of the truncated OmpW-TliA fusion protein on the cell-surface was confirmed by immunoblotting and functional assay of lipase activity. Enantioselective hydrolysis of rac-phenylethyl butanoate by the displayed lipase resulted in optically active (R)-phenyl ethanol with 96 % enantiomeric excess and 44 % of conversion in 5 days. Thus, a small outer membrane protein OmpW, is a useful anchoring motif for displaying an active enzyme of ~50 kDa on the cell-surface and the surface-displayed lipase can be employed as an enantioselective biocatalyst in organic synthesis.     

Isolation and characteristics of the lipid granules of Candida tropicalis yeasts

Preparative isolation of lipid granules from the protoplasts of Candida tropicalis was conducted by a technique of flotation in a stepwise density gradient. Parameters were selected for decomposing the protoplasts under hypotonic and isotonic conditions which made it possible to preserve the lipid granules being isolated intact, as well as parameters of a density gradient and centrifugation. The specific content of lipids, proteins and low molecular weight compounds was assayed using labeled compounds in the lipid granules which were isolated from yeast cells cultivated on various carbon substrates (1-6(-14C)-glucose and 1(-14C-octadecane). The lipid composition of the spherosomes was determined. If the yeast was grown on glucose, lipids localized in the lipid granules were represented mainly by triglycerides whose carbon constituted 69 per cent of the total lipid carbon. If it was cultivated on n-octadecane, these lipids were represented by hydrocarbons (51 per cent) and triglycerides (22 per cent). The structures isolated possessed a small lipase activity. The specific lipase activity of the lipid granules was lower by 16 per cent than that of the cell protoplast.     

Dependence of catalytic performance of a freeze-dried whole-cell biocatalyst of Pseudomonas fluorescens in regioselective acetylation of 1-β-d-arabinofuranosylcytosine on growth conditions

A freeze-dried whole-cell biocatalyst was prepared from Pseudomonas fluorescens and applied for the first time to regioselective synthesis of 1-β-d-arabinofuranosylcytosine monoester in nonaqueous media. The catalytic performances of the bacterial cells were significantly enhanced by cultivation with a mixed carbon sources containing yeast extract and additional lipid-related substrates, especially the supplement of soybean oil. Cultivation of the cells supplemented with glucose, however, resulted in both low biomass and catalytic activities in the acylation. Taking into account the yield and 5′-regioselectivity of the cell-mediated reaction, yeast extract appeared to be the most suitable for cell cultivation, of all the tested nitrogen sources. Due to the fact that the nutrient concentrations and culture time are also crucial factors affecting the corresponding cell-catalyzed reaction, their effect on the catalytic performance of the cells were also investigated. The best soybean oil concentration, yeast extract concentration and culture time were 0.5% (w/v), 0.1% (w/v) and 48 h, respectively, under which the yield and 5′-regioselectivity of the reaction catalyzed by the cell biocatalyst reached 75.4% and 96.8%, respectively. Our results demonstrated that P. fluorescens whole cell was a green and economic alternative to enzymes for regioselective acylation of ara-C in non-aqueous media.     

Development of novel yeast cell surface display system for homo-oligomeric protein by coexpression of native and anchored subunits

Streptavidin derived from Streptomyces avidinii was displayed on the cell surface of the yeast Saccharomyces cerevisiae by cell-surface engineering using two types of plasmid for the expression of a native subunit and an anchored subunit fused with the C-terminus of 318 amino acids of Flo1p containing a glycosylphosphatidylinositol anchor attachment signal. The displayed streptavidin had the binding ability for biotinylated compounds. This was confirmed by fluorescence microscopy after the adsorption of yeast cells displaying streptavidin and biotinylated fluorescein isothiocyanate. On the other hand, streptavidin produced by cells harboring only the plasmid for the expression of the anchored subunit showed a very low binding activity for biotinylated compounds. Cells displaying streptavidin may constitute novel whole-cell affinity adsorbents widely used for immunoassay and biosensing. This coexpression method will ensure that proteins, such as homo- and hetero-oligomeric proteins, are displayed on the cell surface in an active form.