Proline dehydrogenase from Pseudomonas fluorescens: Gene cloning, purification, characterization and homology modeling

The gene encoding proline dehydrogenase (ProDH) from Pseudomonas fluorescens was isolated using PCR amplification and cloned into pET23a expression vector. The expression of the recombinant target enzyme was induced by addition of IPTG. The produced His-fusion enzyme was purified and its kinetic properties were studied. The 3D structure modeling was also performed to identify key amino acids involved in FAD-binding and catalysis. The PCR product contained a 1033 bp open reading frame encoding 345 amino acid residue polypeptide chain. SDS-PAGE analysis revealed a MW of 40 kDa, whereas the native enzyme exhibited a MW of 40 kDa suggesting a monomeric protein. The K _m and V _max values of the P. fluorescens ProDH were estimated to be 35 mM and 116 μmol/min, respectively. ProDH activity was stable at alkaline pH and the highest activity was observed at 30°C and pH 8.5. The modeling analysis of the three dimensional structure elucidated that Lys-173 and Asp-202, which were oriented near the hydroxyl group of the substrate, were essential residues for the ProDH activity. This study, to our knowledge, is the first data on the cloning and biochemical and structural properties of P. fluorescens ProDH.     

Proline dehydrogenase from Pseudomonas fluorescence: gene cloning, purification, characterization and homology modeling

The gene encoding proline dehydrogenase (ProDH) from Pseudomonas fluorescence was isolated using PCR amplification and cloned into pET23a expression vector. The expression of the recombinant target enzyme was induced by addition of IPTG. The produced His-fusion enzyme was purified and its kinetic properties were studied. The 3D structure modeling was also performed to identify key amino acids involved in FAD-binding and catalysis. The PCR product contained a 1033 bp open reading frame encoding 345 amino acid residue polypeptide chain. SDS-PAGE analysis revealed a MW of 40 kDa, whereas the native enzyme exhibited a MW of 40 kDa suggesting a monomeric protein. The K(m) and V(max) values of the P. fluorescence ProDH were estimated to be 35 mM and 116 micromol/min, respectively. ProDH activity was stable at alkaline pH and the highest activity was observed at 30 degrees C and pH 8.5. The modeling analysis of the three dimensional structure elucidated that Lys-173 and Asp-202, which were oriented near the hydroxyl group of the substrate, were essential residues for the ProDH activity. This study, to our knowledge, is the first data on the cloning and biochemical and structural properties of P. fluorescence ProDH.     

Cloning, Expression, and Characterization of an GHF 11 Xylanase from Aspergillus niger XZ-3S

A xylanase gene (xynZF-2) from the Aspergillus niger XZ-3S was cloned and expressed in Escherichia coli. The coding region of the gene was separated by only one intron with the 68 bp in length. It encoded 225 amino acid residues of a protein with a calculated molecular weight of 24.04 kDa plus a signal peptide of 18 amino acids. The amino acid sequence of the xynZF-2 gene had a high similarity with those of family 11 of glycosyl hydrolases reported from other microorganisms. The mature peptide encoding cDNA was subcloned into pET-28a(+) expression vector. The resultant recombinant plasmid pET-28a-xynZF-2 was transformed into E. coli BL21(DE3), and finally the recombinant strain BL21/xynZF-2 was obtained. A maximum activity of 42.33 U/mg was gained from cellular of E. coli BL21/xynZF-2 induced by IPTG. The optimum temperature and pH for recombinant enzyme which has a good stability in alkaline conditions were 40 °C and 5.0, respectively. Fe³⁺ had an active effect on the enzyme obviously.     

Purification and Characterization of an Extracellular Low Temperature-Active and Alkaline Stable Peptidase from Psychrotrophic Acinetobacter sp. MN 12 MTCC (10786)

An extracellular low temperature-active alkaline stable peptidase from Acinetobacter sp. MN 12 was purified to homogeneity with a purification fold of 9.8. The enzyme exhibited specific activity of 6,540 U/mg protein, with an apparent molecular weight of 35 kDa. The purified enzyme was active over broad range of temperature from 4 to 60 °C with optimum activity at 40 °C. The enzyme retained more than 75 % of activity over a broad range of pH (7.0–11.0) with optimum activity at pH 9.0. The purified peptidase was strongly inhibited by phenylmethylsulfonyl fluoride, giving an indication of serine type. The K _m and V _max for casein and gelatin were 0.3529, 2.03 mg/ml and 294.11, 384.61 μg/ml/min respectively. The peptidase was compatible with surfactants, oxidizing agents and commercial detergents, and effectively removed dried blood stains on cotton fabrics at low temperature ranging from 15 to 35 °C.     

Highly thermostable and surfactant-activated chitinase from a subseafloor bacterium,Laceyella putida

A novel chitinase (LpChiA) was purified to homogeneity from a culture of Laceyella putida JAM FM3001. LpChiA hydrolyzed colloidal chitin optimally at a pH of 4 in an acetate buffer and temperature of 75?ºC. The enzyme was remarkably stable to incubation at 70?ºC up to 1 h at pH 5.2, and its activity half-life was 3 days. The molecular mass of the enzyme was around 38 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and around 75 kDa by gel filtration, suggesting it is a homodimer. The enzyme activity was enhanced about 60 % when pre-incubated with anionic, cationic, and nonionic surfactants. The gene for LpChiA was cloned by PCR and sequenced. The nucleotide sequence of the gene consisted of 1,683 bp encoding 560 amino acids. The N-terminal and internal amino acid sequences of the purified LpChiA from L. putida suggested that the mature enzyme was composed of 384 amino acids after cleaving its 176 N-terminal amino acids and dimerized to express its activity. The deduced amino acid sequence of the mature enzyme showed the highest similarity to chitinase of Laceyella sacchari with 79 % identity.     

Cloning and characterization of a new manganese superoxide dismutase from deep-sea thermophile Geobacillus sp. EPT3

A new gene encoding a superoxide dismutase (SOD) was identified from a thermophile Geobacillus sp. EPT3 isolated from a deep-sea hydrothermal field in east Pacific. The open reading frame of this gene encoded 437 amino acid residues. It was cloned, overexpressed in Escherichia coli (DE3), and the recombinant protein was purified to homogeneity. Geobacillus sp. EPT3 SOD was of the manganese-containing SOD type, as judged by the insensitivity of the recombinant enzyme to both KCN and H₂O₂, and the activity analysis of Fe or Mn reconstituted SODs by polyacrylamide gel electrophoresis. The recombinant SOD was determined to be a homodimer with monomeric molecular mass of 59.0 kDa. In comparison with other Mn–SODs, the manganese-binding sites are conserved in the sequence (His260, His308, Asp392, His396). The recombinant enzyme had high thermostability at 50 °C. It retained 57 % residual activity after incubation at 90 °C for 1 h, which indicated that this SOD was thermostable. The enzyme also showed striking stability over a wide range of pH 5.0–11.0. At tested conditions, the recombinant SOD from Geobacillus sp. EPT3 showed a relatively good tolerance to some inhibitors, detergents, and denaturants, such as β-mercaptoethanol, dithiothreitol, phenylmethylsulfonyl fluoride, Chaps, Triton X-100, urea, and guanidine hydrochloride.     

Catechol 1,2-dioxygenase from the new aromatic compounds - Degrading Pseudomonas putida strain N6

This study aimed to characterization of catechol 1,2-dioxygenase from a Gram-negative bacterium, being able to utilize a wide spectrum of aromatic substrates as a sole carbon and energy source. Strain designated as N6, was isolated from the activated sludge samples of a sewage treatment plant at Bentwood Furniture Factory Jasienica, Poland. Morphology, physio-biochemical characteristics and phylogenetic analysis based on 16S rDNA sequence indicate that strain belongs to Pseudomonas putida. When cells of strain N6 grown on protocatechuate or 4-hydroxybenzoic acid mainly protocatechuate 3,4-dioxygenase was induced. The activity of catechol 1,2-dioxygenase was rather small. The cells grown on benzoic acid, catechol or phenol showed high activity of only catechol 1,2-dioxygenase. This enzyme was optimally active at 35 °C and pH 7.4. Kinetic studies showed that the value of K_m and V_max was 85.19 ??M and 14.54 ??M min⁻¹ respectively. Nucleotide sequence of gene encoding catechol 1,2-dioxygenase in strain N6 has 100% identity with catA genes from two P. putida strains. The deduced 301-residue sequence of enzyme corresponds to a protein of molecular mass 33.1 kDa. The deduced molecular structure of the catechol 1,2-dioxygenase from P. putida N6 was very similar and characteristic for the other intradiol dioxygenases.     

Molecular characterization and homology modeling of spermidine synthase from <Emphasis Type="Italic">Synechococcus</Emphasis> sp. PCC 7942

Spermidine synthase (Spds) catalyzes the formation of spermidine by transferring the aminopropyl group from decarboxylated S-adenosylmethionine (dcSAM) to putrescine. The Synechococcus spds gene encoding Spds was expressed in Escherichia coli. The purified recombinant enzyme had a molecular mass of 33 kDa and showed optimal activity at pH 7.5, 37?°C. The enzyme had higher affinity for dcSAM (K _m, 20 µM) than for putrescine (K _m, 111 µM) and was highly specific towards the diamine putrescine with no activity observed towards longer chain diamines. The three-dimensional structural model for Synechococcus Spds revealed that most of the ligand binding residues in Spds from Synechococcus sp. PCC 7942 are identical to those of human and parasite Spds. Based on the model, the highly conserved acidic residues, Asp89, Asp159 and Asp162, are involved in the binding of substrates putrescine and dcSAM and Pro166 seems to confer substrate specificity towards putrescine.     

β-cyclodextrin production by the cyclodextrin glucanotransferase from Paenibacillus illinoisensis ZY-08: cloning, purification, and properties

The gene encoding the cyclodextrin glucanotransferase (CGTase, EC2.4.1.19) of Paenibacillus illinoisensis was isolated, cloned, sequenced and expressed in Escherichia coli. Sequence analysis showed that the mature enzyme (684 amino acids) was preceded by a signal peptide of 34-residues. The deduced amino acid sequence of the CGTase from P. illinoisensis ZY-08 exhibited highest identity (99 %) to the CGTase sequence from Bacillus licheniformis (P14014). The four consensus regions of carbohydrate converting domain and Ca²⁺ binding domain could be identified in the sequence. The CGTase was purified by using cold expression vector, pCold I, and His-tag affinity chromatography. The molecular weight of the purified enzyme was about 74 kDa. The optimum temperature and pH of the enzyme were 40 °C and pH 7.4, respectively. The enzyme activity was increased by the addition of Ca²⁺ and inhibited by Ba²⁺, Cu²⁺, and Hg²⁺. The K _m and V _max values calculated were 0.48 mg/ml and 51.38 mg of β-cyclodextrin/ml/min. The ZY-08 and recombinant readily converted soluble starch to β-cyclodextrin but ZY-08 did not convert king oyster mushroom powder and enoki mushroom powder. However the recombinant CGTase converted king oyster mushroom powder and enoki mushroom powder to β-cyclodextrin.     

Cloning, expression and functional characterization of a novel trehalose synthase from marine Pseudomonas sp. P8005

Trehalose synthase (TreS) catalyzes the reversible interconversion of maltose and trehalose. A novel treS gene with a length of 3,369 bp, encoding a protein of 1,122 amino acid residues with a predicted molecular mass of 126 kDa, was cloned from a marine Pseudomonas sp. P8005 (CCTCC: M2010298) and expressed in Escherichia coli. The amino acid sequence identities between this novel TreS and other reported TreS is relatively low. The purified recombinant TreS showed an optimum pH and temperature of 7.2 and 37 °C, respectively. The enzyme displayed a high conversion rate (70 %) of maltose to trehalose during equilibrium and had a higher catalytic efficiency (k _cat/K _m) for maltose than for trehalose, suggesting its application in the production of trehalose. In addition to maltose and trehalose, this enzyme can also act on sucrose, although this activity is relatively low. Mutagenesis studies demonstrated that enzymatic activity was reduced dramatically by individually substitution with alanine for D78, Y81, H121, D219, E261, H331 or D332, which implied that these residues might be important in P8005-TreS. Experiments using isotope-labeled substrates showed that [²H₂]trehalose combined with unlabeled trehalose was converted to [²H₂]maltose and maltose, but without any production of [²H]maltose or [²H]trehalose and with no incorporation of exogenous [²H₇]glucose into the disaccharides during the conversion catalyzed by this enzyme. This finding indicated the involvement of an intramolecular mechanism in P8005-TreS catalyzing the reversible interconversion of maltose and trehalose.     

Heterologous expression and biochemical characterization of acetyl xylan esterase from Coprinopsis cinerea

Acetyl xylan esterase (AXE) from basidiomycete Coprinopsis cinerea Okayama 7 (#130) was functionally expressed in Pichia pastoris with a C-terminal tag under the alcohol oxidase 1 (AOX1) promoter and secreted into the medium at 1.5 mg l^?1. Its molecular mass was estimated to be 65.5 kDa based on the SDS-PAGE analysis, which is higher than the calculated molecular mass of 40 kDa based on amino acid composition. In-silico analysis of the amino acid sequence predicted two potential N-glycosylation sites. Results from PNGase F deglycosylation and mass spectrum confirmed the presence of N-glycosylation on the recombinant AXE with predominant N-glycans HexNAc₂Hex_9–16. The recombinant AXE showed best activity at 40 °C and pH 8. It showed not only acetyl esterase activity with a K_m of 4.3 mM and a V_max of 2.15 U mg^?1 for hydrolysis of 4-nitrophenyl acetate but also a butyl esterase activity for hydrolysis of 4-nitrophenyl butyrate with a K_m of 0.11 mM and V_max of 0.78 U mg^?1. The presence of two additional amino acid residues at its native N-terminus was found to help stabilize the enzyme against the protease cleavages without affecting its activity.     

Cloning of a Family 11 Xylanase Gene from Bacillus amyloliquefaciens CH51 Isolated from Cheonggukjang

Bacillus amyloliquefaciens CH51, an isolate from cheonggukjang, Korean fermented soyfood, secretes several enzymes into culture medium. A gene encoding 19 kDa xylanase was cloned by PCR. Sequencing showed that the gene encoded a glycohydrolase family 11 xylanase and named xynA. xynAHis, xynA with additional codons for his-tag, was overexpressed in Escherichia coli BL21(DE3) using pET-26b(+). XynAHis was purified using HisTrap affinity column. K_m and V_max of XynAHis were 0.363 mg/ml and 701.1 μmol/min/mg, respectively with birchwood xylan as a substrate. The optimum pH and temperature were pH 4 and 25 °C, respectively. When xynA was introduced into Bacillus subtilis WB600, active XynA was secreted into culture medium.     

Characterization of ergothionase from Burkholderia sp. HME13 and its application to enzymatic quantification of ergothioneine

We identified ergothionase, which catalyzes conversion of ergothioneine to thiolurocanic acid and trimethylamine, in a newly isolated ergothioneine-utilizing strain, Burkholderia sp. HME13. The enzyme was purified and its N-terminal amino acid sequence was determined. Based on the amino acid sequence, the gene encoding the enzyme was cloned and expressed in Escherichia coli. The recombinant enzyme was purified to homogeneity and characterized. The enzyme consisted of four identical 55-kDa subunits. The enzyme showed maximum activity at pH 8.0 and 65 °C and was stable between pH 7.0 and pH 10.0 and up to 60 °C. The enzyme acted on ergothioneine (K _m: 19 μM, V _max: 270 μmol/min/mg), but not d-histidine, l-histidine, d-tyrosine, l-tyrosine, d-phenylalanine, or l-phenylalanine. The enzyme was activated by BaCl₂ and strongly inhibited by CuSO₄, ZnSO₄, and HgCl₂. The amino acid sequence of ergothionase showed 23 % similarity to histidine ammonia-lyase (HAL) from Pseudomonas putida and 17 % similarity to phenylalanine ammonia-lyase (PAL) from parsley. However, the tripeptide sequence, Ala-Ser-Gly, which is important for catalysis in both HAL and PAL, was not conserved in ergothionase. The application of ergothionase for the quantification of ergothioneine contained in practical food and blood samples was investigated by performing a recovery test. Satisfactory recovery data (98.7–104 %) were obtained when ergothioneine was added to extract of tamogitake and hemolysis blood.     

Biochemical characterization and high-level production of oxidized polyvinyl alcohol hydrolase from Sphingopyxis sp. 113P3 expressed in methylotrophic Pichia pastoris

The Sphingopyxis sp. 113P3 gene oph, encoding oxidized polyvinyl alcohol hydrolase (OPH), was optimized with the preferred codons of Pichia pastoris and ligated into the pPIC9K vector behind the α-factor signal sequence. The vector was then transfected into P. pastoris GS115 and genomic integration was confirmed. Large-scale production of recombinant protein was performed by induction with 14.4 g/L methanol at 22 °C in a 3-L bioreactor. The maximal OPH activity obtained was 68.4 U/mL, which is the highest activity reported. The optimal pH and temperature of recombinant OPH were 8.0 and 45 °C, respectively. OPH activity was stable over a pH range of 5.0–8.5, and at a maximal temperature of 45 °C. The K _cat /K _m of recombinant OPH was 598 mM^?1 s^?1, which was 4.27-fold higher than that of recombinant OPH derived from Escherichia coli. The improved catalytic efficiency of OPH expressed in recombinant P. pastoris makes it favorable for industrial applications.     

Expression of a keratinase (kerA) gene from Bacillus licheniformis in Escherichia coli and characterization of the recombinant enzymes

The gene kerA (1,047 bp) encoding the main keratinase from Bacillus licheniformis was cloned into two conventional vectors, pET30α and pET32α, and expressed in Escherichia coli. From SDS-PAGE analysis, the recombinant keratinases were 45 and 55 kDa. They had different optimal pH values (7.5 and 8.5) but the same optimum temperature of 50 °C. The recombinant keratinase produced in E. coli pET30α-kerA was more stable than that produced in E. coli pET32α-kerA, and retained approx. 70 % of its total enzyme activity after 30 min at 70 °C.     

Isolation and characterization of a novel glycosyl hydrolase family 74 (GH74) cellulase from the black goat rumen metagenomic library

This study aimed to isolate and characterize a novel cellulolytic enzyme from black goat rumen by using a culture-independent approach. A metagenomic fosmid library was constructed from black goat rumen contents and screened for a novel cellulase. The KG37 gene encoding a protein of 858 amino acid residues (92.7 kDa) was isolated. The deduced protein contained a glycosyl hydrolase family 74 (GH74) domain and showed 77% sequence identity to two endo-1,4-β-glucanases from Fibrobacter succinogenes. The novel GH74 cellulase gene was overexpressed in Escherichia coli, and its protein product was functionally characterized. The recombinant GH74 cellulase showed a broad substrate spectrum. The enzyme exhibited its optimum activity at pH 5.0 and temperature range of 20–50 °C. The enzyme was thermally stable at pH 5.0 and at a temperature of 20–40 °C. The novel GH74 cellulase can be practically exploited to convert lignocellulosic biomass to value-added products in various industrial applications in future.     

The attractive recombinant phytase from Bacillus licheniformis: biochemical and molecular characterization

The phyL gene encoding phytase from the industrial strain Bacillus licheniformis ATCC 14580 (PhyL) was cloned, sequenced, and overexpressed in Escherichia coli. Biochemical characterization demonstrated that the recombinant enzyme has an apparent molecular weight of nearly 42 kDa. Interestingly, this enzyme was optimally active at 70–75 °C and pH 6.5–7.0. This enzyme is distinguishable by the fact that it preserved more than 40 % of its activity at wide range of temperatures from 4 to 85 °C. This new phytase displayed also a high specific activity of 316 U/mg. For its maximal activity and thermostability, this biocatalyst required only 0.6 mM of Ca²⁺ ion and exhibited high catalytic efficiency of 8.3 s^?1 μM^?1 towards phytic acid.     

Cloning,characterization and heterelogous expression of the INU1 gene from Cryptococcus aureus HYA

The INU1 gene (Accession number: JX073660) encoding exo-inulinase from Cryptococcus aureus HYA was cloned and characterized. The gene had an open reading frame (ORF) of 1653 bp long encoding an inulinase. The coding region of the gene was not interrupted by any intron. It encoded 551 amino acid residues of a protein with a putative signal peptide of 23 amino acids and the calculated molecular mass of 59.5 kDa. The protein sequence deduced from the inulinase structural gene contained the inulinase consensus sequences (WMNDPNGL), (RDP), ECP, FS and Q. It also had two conserved putative N-glycosylation sites. The inulinase from C. aureus HYA was found to be closely related to that from Kluyveromyces marxianus and Pichia guilliermondii. The inulinase gene without the signal sequence was subcloned into pPICZaA expression vector and expressed in Pichia pastoris X-33. The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 60 kDa was found. Enzyme activity assay verified the recombinant protein as an inulinase. A maximum inulinase activity of 16.3 ± 0.24 U/ml was obtained from the culture supernatant of P. pastoris X-33 harboring the inulinase gene. The optimal temperature and pH for action of the enzyme were 50 °C and 5.0, respectively. A large amount of monosaccharides were detected after the hydrolysis of inulin with the purified recombinant inulinase.     

Cloning and characterization of a new broadspecific β-glucosidase from Lactococcus sp. FSJ4

A β-glucosidase gene bglX was cloned from Lactococcus sp. FSJ4 by the method of shotgun. The bglX open reading frame consisted of 1,437 bp, encoding 478 amino acids. SDS-PAGE showed a recombinant bglX monomer of 54 kDa. Substrate specificity study revealed that the enzyme exhibited multifunctional catalysis activity against pNPG, pNPX and pNPGal. This enzyme shows higher activity against aryl glycosides of xylose than those of glucose or galactose. The enzyme exhibited the maximal activity at 40 °C, and the optimal pH was 6.0 with pNPG and 6.5 with pNPX as the substrates. Molecular modeling and substrate docking showed that there should be one active center responsible for the mutifuntional activity in this enzyme, since the active site pocket was substantially wide to allow the entry of pNPG, pNPX and pNPGal, which elucidated the structure–function relationship in substrate specificities. Substrate docking results indicated that Glu180 and Glu377 were the essential catalytic residues of the enzyme. The CDOCKER_ENERGY values obtained by substrate docking indicated that the enzyme has higher activity against pNPX than those of pNPG and pNPGal. These observations are in conformity with the results obtained from experimental investigation. Therefore, such substrate specificity makes this β-glucosidase of great interest for further study on physiological and catalytic reaction processes.     

A novel cold-active and salt-tolerant α-amylase from marine bacterium Zunongwangia profunda: molecular cloning,heterologous expression and biochemical characterization

A novel gene (amyZ) encoding a cold-active and salt-tolerant α-amylase (AmyZ) was cloned from marine bacterium Zunongwangia profunda (MCCC 1A01486) and the protein was expressed in Escherichia coli. The gene has a length of 1785 bp and encodes an α-amylase of 594 amino acids with an estimated molecular mass of 66 kDa by SDS-PAGE. The enzyme belongs to glycoside hydrolase family 13 and shows the highest identity (25 %) to the characterized α-amylase TVA II from thermoactinomyces vulgaris R-47. The recombinant α-amylase showed the maximum activity at 35 °C and pH 7.0, and retained about 39 % activity at 0 °C. AmyZ displayed extreme salt tolerance, with the highest activity at 1.5 M NaCl and 93 % activity even at 4 M NaCl. The catalytic efficiency (k _cat/K _m) of AmyZ increased from 115.51 (with 0 M NaCl) to 143.30 ml mg^?1 s^?1 (with 1.5 M NaCl) at 35 °C and pH 7.0, using soluble starch as substrate. Besides, the thermostability of the enzyme was significantly improved in the presence of 1.5 M NaCl or 1 mM CaCl₂. AmyZ is one of the very few α-amylases that tolerate both high salinity and low temperatures, making it a potential candidate for research in basic and applied biology.