Two versatile shuttle vectors for Thermus thermophilus-Escherichia coli containing multiple cloning sites, lacZα gene and kanamycin or hygromycin resistance marker

Two versatile shuttle vectors for Thermus thermophilus and Escherichia coli were developed on the basis of the T. thermophilus cryptic plasmid pTT8 and E. coli vector pUC13. These shuttle vectors, pTRK1T and pTRH1T, carry a gene encoding a protein homologous to replication protein derived from pTT8, a replicon for E. coli, new multiple cloning sites and a lacZα gene from E. coli vector pUC13, and also have a gene encoding a thermostable protein that confers resistance to kanamycin or hygromycin, which can be used as a selection marker in T. thermophilus. These shuttle vectors are useful to develop enzymes and proteins of biotechnological interest. We also constructed a plasmid, pUC13T, which carries the same multiple cloning sites of pTRK1T and pTRH1T. These vectors should facilitate cloning procedures both in E. coli and T. thermophilus.     

A high-transformation-efficiency cloning vector for Thermus thermophilus.

The cloning vector pMK18 was developed through the fusion of the minimal replicative region from an indigenous plasmid of Thermus sp. ATCC27737, a gene cassette encoding a thermostable resistance to kanamycin, and the replicative origin and multiple cloning site of pUC18. Plasmid pMK18 showed transformation efficiencies from 10(8) to 10(9) per microgram of plasmid in Thermus thermophilus HB8 and HB27, both by natural competence and by electroporation. We also show that T. thermophilus HB27 can take pMK18 modified by the Escherichia coli methylation system with the same efficiency as its own DNA. To demonstrate its usefulness as a cloning vector, a gene encoding the beta-subunit of a thermostable nitrate reductase was directly cloned in T. thermophilus HB27 from a gene library. Its further transfer to E. coli also proved its utility as a shuttle vector.     

Inducible and constitutive expression using new plasmid and integrative expression vectors for Thermus sp.

AIMS: To develop molecular tools and examine inducible and constitutive gene expression in Thermus thermophilus. METHODS AND RESULTS: Two plasmid promoter probe vectors and an integrative promoter probe vector were constructed using a promoterless thermostable kanamycin nucleotidyltransferase (KmR) cassette. Three expression vectors were constructed based on a constitutive promoter J17, that functions in both Thermus and Escherichia coli. An inducible expression vector was constructed using the heat-shock inducible promoter (70 to 85 degrees C) from the dnaK gene of T. flavus, and the malate dehydrogenase gene (mdh) from T. flavus was cloned and expressed in both E. coli and T. thermophilus HB27. CONCLUSION: This report describes the construction and use of improved promoter probe and expression vectors for use in Thermus species. The mdh gene can be used as a high temperature (85 degrees C) reporter gene for Thermus sp. The dnaK promoter is thermo-inducible. Significance and Impact of the Study: The expression vectors and molecular tools described here are significant improvements over previously reported vectors for Thermus sp. The mdh gene and the thermo-inducible dnaK promoter will facilitate high temperature studies employing Thermus species.     

Production of recombinant alpha-galactosidases in Thermus thermophilus

A Thermus thermophilus selector strain for production of thermostable and thermoactive alpha-galactosidase was constructed. For this purpose, the native alpha-galactosidase gene (agaT) of T. thermophilus TH125 was inactivated to prevent background activity. In our first attempt, insertional mutagenesis of agaT by using a cassette carrying a kanamycin resistance gene led to bacterial inability to utilize melibiose (alpha-galactoside) and galactose as sole carbohydrate sources due to a polar effect of the insertional inactivation. A Gal(+) phenotype was assumed to be essential for growth on melibiose. In a Gal(-) background, accumulation of galactose or its metabolite derivatives produced from melibiose hydrolysis could interfere with the growth of the host strain harboring recombinant alpha-galactosidase. Moreover, the AgaT(-) strain had to be Km(s) for establishment of the plasmids containing alpha-galactosidase genes and the kanamycin resistance marker. Therefore, a suitable selector strain (AgaT(-) Gal(+) Km(s)) was generated by applying integration mutagenesis in combination with phenotypic selection. To produce heterologous alpha-galactosidase in T. thermophilus, the isogenes agaA and agaB of Bacillus stearothermophilus KVE36 were cloned into an Escherichia coli-Thermus shuttle vector. The region containing the E. coli plasmid sequence (pUC-derived vector) was deleted before transformation of T. thermophilus with the recombinant plasmids. As a result, transformation efficiency and plasmid stability were improved. However, growth on minimal agar medium containing melibiose was achieved only following random selection of the clones carrying a plasmid-based mutation that had promoted a higher copy number and greater stability of the plasmid.     

Sequence of the tufA gene encoding elongation factor EF-Tu from Thermus aquaticus and overproduction of the protein in Escherichia coli.

The sequence of the tufA gene from the extreme thermophilic eubacterium Thermus aquaticus EP 00276 was determined. The GC content in third positions of codons is 89.5%, with an unusual predominance of guanosine (60.7%). The derived protein sequence differs from tufA- and tufB-encoded sequences for elongation factor Tu (EF-Tu) of Thermus thermophilus HB8, another member of the genus Thermus, in 10 of the 405 amino acid residues. Three exchanges are located in the additional loop of ten amino acids (182-191). The loop, probably involved in nucleotide binding, is absent in EF-Tu of the mesophile Escherichia coli. Since EF-Tu from E. coli is quite unstable, the protein is well-suited for analyzing molecular changes that lead to thermostabilization. Comparison of the EF-Tu domain I from E. coli and Thermus strains revealed clustered amino acid exchanges in the C-terminal part of the first helix and in adjacent residues of the second loop inferred to interact with the ribosome. Most other exchanges in the guanine nucleotide binding domain are located in loops or nearest vicinity of loops suggesting their importance for thermostability. The T. aquaticus EF-Tu was overproduced in E. coli using the tac expression system. Identity of the recombinant T. aquaticus EF-Tu was verified by Western blot analysis, N-terminal sequencing and GDP binding assays.     

Shuttle vectors containing a multiple cloning site and a lacZ alpha gene for conjugal transfer of DNA from Escherichia coli to gram-positive bacteria

The mobilizable shuttle cloning vectors, pAT18 and pAT19, are composed of: (i) the replication origins of pUC and of the broad-host-range enterococcal plasmid pAM beta 1; (ii) an erythromycin-resistance-encoding gene expressed in Gram- and Gram+ bacteria; (iii) the transfer origin of the IncP plasmid RK2; and (iv) the multiple cloning site and the lacZ alpha reporter gene of pUC18 (pAT18) and pUC19 (pAT19). These 6.6-kb plasmids contain ten unique cloning sites that allow screening of derivatives containing DNA inserts by alpha-complementation in Escherichia coli carrying the lacZ delta M15 deletion, and can be efficiently mobilized by self-transferable IncP plasmids co-resident in the E. coli donors. Plasmids pAT18, pAT19 and recombinant derivatives have been successfully transferred by conjugation from E. coli to Bacillus subtilis, Bacillus thuringiensis, Listeria monocytogenes, Enterococcus faecalis, Lactococcus lactis, and Staphylococcus aureus at frequencies ranging from 10(-6) to 10(-9). The presence of a restriction system in the recipient dramatically affects (by three orders of magnitude) the efficiency of conjugal transfer of these vectors from E. coli to Gram+ bacteria.     

Comparative analysis of ribosomal protein L5 sequences from bacteria of the genus Thermus.

The genes for the ribosomal 5S rRNA binding protein L5 have been cloned from three extremely thermophilic eubacteria, Thermus flavus, Thermus thermophilus HB8 and Thermus aquaticus (Jahn et al, submitted). Genes for protein L5 from the three Thermus strains display 95% G/C in third positions of codons. Amino acid sequences deduced from the DNA sequence were shown to be identical for T flavus and T thermophilus, although the corresponding DNA sequences differed by two T to C transitions in the T thermophilus gene. Protein L5 sequences from T flavus and T thermophilus are 95% homologous to L5 from T aquaticus and 56.5% homologous to the corresponding E coli sequence. The lowest degrees of homology were found between the T flavus/T thermophilus L5 proteins and those of yeast L16 (27.5%), Halobacterium marismortui (34.0%) and Methanococcus vannielii (36.6%). From sequence comparison it becomes clear that thermostability of Thermus L5 proteins is achieved by an increase in hydrophobic interactions and/or by restriction of steric flexibility due to the introduction of amino acids with branched aliphatic side chains such as leucine. Alignment of the nine protein sequences equivalent to Thermus L5 proteins led to identification of a conserved internal segment, rich in acidic amino acids, which shows homology to subsequences of E coli L18 and L25. The occurrence of conserved sequence elements in 5S rRNA binding proteins and ribosomal proteins in general is discussed in terms of evolution and function.     

Construction of mobilizable vectors derived from plasmids RP4, pUC18 and pUC19

Mobilizable narrow-host-range plasmids were constructed from pUC18 and pUC19 by addition of a segment of pSUP2021 bearing the basis of mobilization (bom) site and origin of transfer (oriT) of RP4. One pair of expression vectors, pARO180 and pARO190, retains the beta-lactamase (bla) gene and twelve of the 13 restriction enzyme multiple cloning sites (MCS) of pUC18/19. Another pair was created by replacing the bla gene with the gene encoding kanamycin resistance (kan) from Tn5. The molecules replicate to high copy number in Escherichia coli and Enterobacter aerogenes. They can be transferred efficiently to other Gram- bacteria from the mobilizing strain, E. coli S17-1. In non-enteric strains, the new plasmids can be used as suicide vectors in site-specific insertional mutagenesis.     

葡糖酸醋杆菌内源复制片段的克隆

采用改进的碱裂解法提取Gluconacetobacter hansenii ATCC23769自发不产膜突变体的内源隐蔽质粒。用不同的限制性内切酶对混合质粒直接进行酶切,酶切后的片段混合物与pUC18载体连接构建重组载体。重组载体回转入G.hansenii ATCC23769获得隐蔽质粒上具有复制能力的片段,序列结果分析表明:该片段上没有某些其他质粒所具有的Rep蛋白。利用该片段,构建了能同时在大肠杆菌和葡糖酸醋杆菌中复制的质粒载体,体内的抗生素抗性实验证明该载体具有良好的稳定性。     

A plasmid vector for an extreme thermophile, Thermus thermophilus

The host-vector system for an extreme thermophile, Thermus thermophilus HB27, was developed. The host strain has a mutation in tryptophan synthetase gene (trpB), and the mutation was determined to be a missense mutation by DNA sequence analysis. A Thermus-E. coli shuttle vector pYK109 was constructed. pYK109 consists of Thermus cryptic plasmid pTT8, tryptophan synthetase gene (trpB) of Thermus T2 and E. coli plasmid vector pUC13. pYK109 transformed T. thermophilus HB27 trpB5 to Trp+ at a frequency of 10(6) transformants per microgram DNA.     

Isolation of a low-molecular-weight, multicopy plasmid, pNHK101, from Thermus sp. TK10 and its use as an expression vector for T. thermophilus HB27

We isolated a small multicopy cryptic plasmid, pNHK101, from Thermus sp. TK10 for use as a replicon of a Thermus expression vector. The nucleotide sequence of pNHK101 revealed that this plasmid was 1564bp long, with a total G+C content of 66.8%, which was in agreement with that of Thermus genomic DNA. The sequence did not show any significant similarities to any other plasmids; also, the amino acid sequences of four putative open reading frames, found in the plasmid, did not show strong similarities to those in the databases, except the ORF1, which had very slight similarities to several replication proteins of plasmids from other bacteria. pNHK101 was able to replicate in Thermus thermophilus HB27 with copy number about 80, and was stably maintained at 60 degrees C, but became unstable at 70 degrees C. Based on pNHK101, we constructed a plasmid vector, pKMH052, containing the highly thermostable kanamycin resistance gene as a selective marker. The copy number of pKMH052 decreased to about one-fourth of that of pNHK101, but stability at 60 degrees C did not alter under non-selective conditions. pKMH052 was compatible with pTT8, and interestingly, the presence of pTT8 in the same cells improved the stability of pKMH052 at 70 degrees C. Cloning of the crtB gene of T. thermophilus HB27 encoding phytoene synthase into pKMH052, and introduction into T. thermophilus cells resulted in a 2.8-fold production of carotenoids, indicating the potential use of this plasmid for overexpression of genes from thermophiles and hyperthermophiles.     

Thermus aquaticus ATCC 33923 amylomaltase gene cloning and expression and enzyme characterization: production of cycloamylose

The amylomaltase gene of the thermophilic bacterium Thermus aquaticus ATCC 33923 was cloned and sequenced. The open reading frame of this gene consisted of 1,503 nucleotides and encoded a polypeptide that was 500 amino acids long and had a calculated molecular mass of 57,221 Da. The deduced amino acid sequence of the amylomaltase exhibited a high level of homology with the amino acid sequence of potato disproportionating enzyme (D-enzyme) (41%) but a low level of homology with the amino acid sequence of the Escherichia coli amylomaltase (19%). The amylomaltase gene was overexpressed in E. coli, and the enzyme was purified. This enzyme exhibited maximum activity at 75 degrees C in a 10-min reaction with maltotriose and was stable at temperatures up to 85 degrees C. When the enzyme acted on amylose, it catalyzed an intramolecular transglycosylation (cyclization) reaction which produced cyclic alpha-1,4-glucan (cycloamylose), like potato D-enzyme. The yield of cycloamylose produced from synthetic amylose with an average molecular mass of 110 kDa was 84%. However, the minimum degree of polymerization (DP) of the cycloamylose produced by T. aquaticus enzyme was 22, whereas the minimum DP of the cycloamylose produced by potato D-enzyme was 17. The T. aquaticus enzyme also catalyzed intermolecular transglycosylation of maltooligosaccharides. A detailed analysis of the activity of T. aquaticus ATCC 33923 amylomaltase with maltooligosaccharides indicated that the catalytic properties of this enzyme differ from those of E. coli amylomaltase and the plant D-enzyme.     

Characterization, cloning, curing, and distribution in lactic acid bacteria of pLP1, a plasmid from Lactobacillus plantarum CCM 1904 and its use in shuttle vector construction

A small 2.1-kb plasmid called pLP1 was extracted from Lactobacillus plantarum CCM 1904 (ATCC 8014) and cloned into the Escherichia coli pUC19 plasmid. As determined by DNA-DNA Southern hybridization with a pLP1-radioactively labeled probe, other lactic acid bacteria such as L. curvatus, L. sake, Carnobacterium, and Leuconostoc mesenteroides harbor pLP1-related plasmids. Shuttle vectors based on the pLP1 replicon were constructed by inserting the erythromycin-resistance gene from pVA891 into the various pUC19-pLP1 constructions. pLP1-based shuttle vector transformation efficiencies (TE) by electroporation were compared to TE of a broad-host-range plasmid pGK12 in different lactobacilli strains. Expression of the pUC19-pLP1 plasmids in Escherichia coli maxicells showed that pLP1 encodes for a 37,000 MW protein which can act in trans allowing the replication of plasmids in which this protein is truncated. The pLP1-based shuttle vectors producing this protein replicate in lactobacilli and also in Bacillus subtilis. A pLP1-free strain was obtained by incompatibility with a pLP1-based shuttle vector introduced in L. plantarum CCM 1904 by electroporation. The absence of pLP1 has no incidence on the strain phenotype suggesting that pLP1 is not essential for the strain in our laboratory conditions.     

Development of a gene expression vector for Thermus thermophilus based on the promoter of the respiratory nitrate reductase

A specific expression system for Thermus spp. is described. Plasmid pMKE1 contains replicative origins for Escherichia coli and Thermus spp., a selection gene encoding a thermostable resistance to kanamycin, and a 720 bp DNA region containing the promoter (Pnar), and the regulatory sequences of the respiratory nitrate reductase operon of Thermus thermophilus HB8. Two genes, encoding a thermophilic beta-galactosidase and an alkaline phosphatase were cloned in pMKE1 as cytoplasmic and periplasmic reporters, respectively. The expression of the reporters was specifically induced by the combined action of nitrate and anoxia in facultative anaerobic derivatives of T. thermophilus HB27 to which the gene cluster for nitrate respiration was transferred by conjugation. Overexpressions in the range of approximately 200-fold were obtained for the cytoplasmic reporter, whereas that of the periplasmic reporter was limited to approximately 20-fold, with respect to their intrinsic respective activities.     

In vivo methylation in Escherichia coli by the Bacillus subtilis phage phi 3T I methyltransferase to protect plasmids from restriction upon transformation of Clostridium acetobutylicum ATCC 824.

The restriction endonuclease Cac824I has been shown to be a major barrier to electrotransformation of Clostridium acetobutylicum ATCC 824 (L. D. Mermelstein, N. E. Welker, G. N. Bennett, and E. T. Papoutsakis, Bio/Technology 10:190-195, 1992). Methylation by the phi 3T I methyltransferase encoded by Bacillus subtilis phage phi 3T was shown to protect plasmid DNA from restriction by Cac824I. Expression in Escherichia coli of the phi 3tI gene (which encodes the phi 3T I methyltransferase) from pAN1, which replicates via the p15A origin of replication, was sufficient to completely methylate coresident E. coli-C. acetobutylicum shuttle vectors with ColE1 origins of replication. Three shuttle vectors (pIMP1, pSYL2, and pSYL7) methylated in this manner were used to efficiently electrotransform strain ATCC 824. These vectors could not be introduced into strain ATCC 824 when unmethylated because the E. coli portions of the plasmids contain a large number of Cac824I sites. This method obviates the need to use B. subtilis-C. acetobutylicum shuttle vectors with few Cac824I sites to introduce DNA into C. acetobutylicum ATCC 824.     

Development of plasmid cloning vectors for Thermus thermophilus HB8: expression of a heterologous, plasmid-borne kanamycin nucleotidyltransferase gene.

While several Thermus genes have been cloned and T. thermophilus has been shown to be transformable, molecular genetic studies of these thermophiles have been hampered by the absence of selectable cloning vectors. We have constructed a selectable plasmid by random insertion of a heterologous gene encoding a thermostable kanamycin nucleotidyltransferase activity into a cryptic, multicopy plasmid from T. thermophilus HB8. This plasmid should serve as a suitable starting point for the development of a gene expression system for T. thermophilus.     

Development of plasmid cloning vectors for Thermus thermophilus HB8: expression of a heterologous, plasmid-borne kanamycin nucleotidyltransferase gene.

While several Thermus genes have been cloned and T. thermophilus has been shown to be transformable, molecular genetic studies of these thermophiles have been hampered by the absence of selectable cloning vectors. We have constructed a selectable plasmid by random insertion of a heterologous gene encoding a thermostable kanamycin nucleotidyltransferase activity into a cryptic, multicopy plasmid from T. thermophilus HB8. This plasmid should serve as a suitable starting point for the development of a gene expression system for T. thermophilus.     

Quantification of intra- and extra-cellular thermophilic lipase/esterase production by Thermus sp.

Four Thermus strains produced lipolytic activity when grown in liquid medium for 30 h at 70 degrees C. The highest total lipase/esterase activity (57 U l(-1)) was in Thermus aquaticus YT-1, followed by Thermus thermophilus HB27 and HB8 (33 and 25 U l(-1), respectively), and finally by Thermus sp. (16 U l(-1)). Extra-cellular activity was detected in T. aquaticus YT-1 and T. thermophilus HB27 (33 and 17 U l(-1)). All enzymes were stable at 80 degrees C over 30 min, and their activity towards fatty acid esters increased as substrate chain-length diminished (i.e. hydrolysis rate was up to 6-fold higher on p-nitrophenyl caproate than on laurate).