Production of Cold-Adapted Amylase by Marine Bacterium <Emphasis Type="Italic">Wangia</Emphasis> sp. C52: Optimization,Modeling, and Partial Characterization

The aim of this work was to optimize the fermentation parameters in the shake-flask culture of marine bacterium Wangia sp. C52 to increase cold-adapted amylase production using two statistical experimental methods including Plackett–Burman design, which was applied to find the key ingredients for the best medium composition, and response surface methodology, which was used to determine the optimal concentrations of these components. The results showed starch, tryptone, and initial pH had significant effects on the cold-adapted amylase production. A central composite design was then employed to further optimize these three factors. The experimental results indicated that the optimized composition of medium was 6.38 g L⁻¹ starch, 33.84 g L⁻¹ tryptone, 3.00 g L⁻¹ yeast extract, 30 g L⁻¹ NaCl, 0.60 g L⁻¹ MgSO₄ and 0.56 g L⁻¹ CaCl₂. The optimized cultivation conditions for amylase production were pH 7.18, a temperature of 20°C, and a shaking speed of 180 rpm. Under the proposed optimized conditions, the amylase experimental yield (676.63 U mL⁻¹) closely matched the yield (685.60 U mL⁻¹) predicted by the statistical model. The optimization of the medium contributed to tenfold higher amylase production than that of the control in shake-flask experiments.     

Production of hexanoic acid from d-galactitol by a newly isolated Clostridium sp. BS-1

In a study screening anaerobic microbes utilizing d-galactitol as a fermentable carbon source, four bacterial strains were isolated from an enrichment culture producing H₂, ethanol, butanol, acetic acid, butyric acid, and hexanoic acid. Among these isolates, strain BS-1 produced hexanoic acid as a major metabolic product of anaerobic fermentation with d-galactitol. Strain BS-1 belonged to the genus Clostridium based on phylogenetic analysis using 16S rRNA gene sequences, and the most closely related strain was Clostridium sporosphaeroides DSM 1294^T, with 94.4% 16S rRNA gene similarity. In batch cultures, Clostridium sp. BS-1 produced 550 ± 31 mL L⁻¹ of H₂, 0.36 ± 0.01 g L⁻¹ of acetic acid, 0.44 ± 0.01 g L⁻¹ of butyric acid, and 0.98 ± 0.03 g L⁻¹ of hexanoic acid in a 4-day cultivation. The production of hexanoic acid increased to 1.22 and 1.73 g L⁻¹ with the addition of 1.5 g L⁻¹ of sodium acetate and 100 mM 2-(N-morpholino)ethanesulfonic acid (MES), respectively. Especially when 1.5 g L⁻¹ of sodium acetate and 100 mM MES were added simultaneously, the production of hexanoic acid increased up to 2.99 g L⁻¹. Without adding sodium acetate, 2.75 g L⁻¹ of hexanoic acid production from d-galactitol was achieved using a coculture of Clostridium sp. BS-1 and one of the isolates, Clostridium sp. BS-7, in the presence of 100 mM MES. In addition, volatile fatty acid (VFA) production by Clostridium sp. BS-1 from d-galactitol and d-glucose was enhanced when a more reduced culture redox potential (CRP) was applied via addition of Na₂S·9H₂O.     

Pullulan production from deproteinized whey by Aureobasidium pullulans

Aureobasidium pullulans P56 was investigated using an adaptation technique and a mixed culture system. The adaptation of A. pullulans and the mixed cultures of A. pullulans and/or Lactobacillus brevisX20, Debaryomyces hansenii 194 and Aspergillus niger did not increase the production of polysaccharide. Enzymic hydrolysis of lactose in deproteinized whey gave a higher polysaccharide concentration and polysaccharide yield than acidic hydrolysed lactose. Maximum polysaccharide concentration (11.0 ± 0.5 g L⁻¹), biomass dry weight (10.5 ± 0.4 g L⁻¹), polysaccharide yield (47.2 ± 1.8%) and sugar utilization (93.2 ± 2.8%) were achieved using enzyme-hydrolysed whey (pH 6.5) containing 25 g L⁻¹ lactose and supplemented with K₂HPO₄ 0.5%, L-glutamic acid 1%, olive oil 2.5%, and Tween 80 0.5%. In this case the pullulan content of the crude polysaccharide was 40%. Received 16 December 1997/ Accepted in revised form 12 March 1999     

Ethanol adaptation in a thermotolerant yeast strain Kluyveromyces marxianus IMB3

The maximum ethanol concentration produced from glucose in defined media at 45°C by the thermotolerant yeast Kluyveromyces marxianus IMB3 was 44 g L⁻¹. Acclimatisation of the strain through continuous culture at ethanol concentrations up to 80 g L⁻¹, shifted the maximum ethanol concentration at which growth was observed from 40 g L⁻¹ to 70 g L⁻¹. Four isolates were selected from the continuous culture, only one of which produced a significant increase in final ethanol concentration (50 ± 0.4 g L⁻¹), however in subsequent fermentations, following storage on nutrient agar plates, the maximum ethanol concentration was comparable with the original isolate. The maximum specific ethanol production rates (approximately 1.5 g (gh)⁻¹) were also comparable with the original strain except for one isolate (0.7 g (gh)⁻¹). The specific ethanol productivity decreased with ethanol concentration; this decrease correlated linearly (rval 0.92) with cell viability. Due to the transience of induced ethanol tolerance in the strain it was concluded that this was not a valid method for improving final ethanol concentrations or production rates. Received 18 July 1997/ Accepted in revised form 19 February 1998     

Development of a cost-effective glucose-corn steep medium for production of butanol by Clostridium beijerinckii

Corn steep water (CSW) medium (1.6% solids plus 6% glucose) was evaluated for growth and butanol production by Clostridium beijerinckii NCIMB 8052 wild-type and hyper-amylolytic, hyper-butanol-producing mutant strain BA101. CSW alone was not a suitable substrate, whereas addition of glucose supported growth and butanol production by both strains. In a batch-scale fermentation using an optimized 6% glucose-1.6% solids CSW medium, C. beijerinckii NCIMB 8052 and strain BA101 produced 10.7 g L⁻¹ and 14.5 g L⁻¹ of butanol, respectively. The total solvents (acetone, butanol, and ethanol) produced by C. beijerinckii NCIMB 8052 and strain BA101 were 14 g L⁻¹ and 20 g L⁻¹, respectively. Initial fermentation in small-scale flasks containing 6% maltodextrin-1.6% solids concentration CSW medium resulted in 6 g L⁻¹ and 12.6 g L⁻¹ of butanol production by C. beijerinckii NCIMB 8052 and strain BA101, respectively. CSW can serve as an economic source of nitrogen, vitamins, amino acids, minerals, and other nutrients. Thus, it is feasible to use 6% glucose-1.6% solids CSW medium in place of semi-defined P2 medium. Received 9 February 1998/ Accepted in revised form 1 September 1998     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Kinetic models for astaxanthin production by high cell density mixotrophic culture of the microalga Haematococcus pluvialis

High cell density cultivation of Haematococcus pluvialis for astaxanthin production was carried out in batch and fed-batch modes in 3.7-L bioreactors with stepwise increased light intensity control mode. A high cell density of 2.65 g L⁻¹ (batch culture) or 2.74 g L⁻¹ (fed-batch culture) was obtained, and total astaxanthin production in the fed-batch culture (64.36 mg L⁻¹) was about 20.5% higher than in the batch culture (53.43 mg L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, astaxanthin formation, as well as sodium acetate consumption was proposed. Good agreement was found between the model predictions and experimental data. The models demonstrated that the optimal light intensity for mixotrophic growth of H. pluvialis in batch or fed-batch cultures in a 3.7-L bioreactor was 90–360 μmol m⁻² s⁻¹, and that the stepwise increased light intensity mode could be replaced by a constant light intensity mode. Received 24 December 1998/ Accepted in revised form 23 April 1999     

Production of curdlan using sucrose or sugar cane molasses by two-step fed-batch cultivation of Agrobacterium species

Maltose and sucrose were efficient carbon sources for the production of curdlan by a strain of Agrobacterium sp. A two-step, fed-batch operation was designed in which biomass was first produced, followed by curdlan production which was stimulated by nitrogen limitation. There exists an optimal timing for nitrogen limitation for curdlan production in the two-step, fed-batch operation. Maximum curdlan production (60 g L⁻¹) was obtained from sucrose with a productivity of 0.2 g L⁻¹ h⁻¹ when nitrogen was limited at a cell concentration of 16.0 g L⁻¹. It was also noted that the curdlan yield from sucrose was as high as 0.45 g curdlan g⁻¹ sucrose, and the highest specific production rate was 1.0 g curdlan g⁻¹ cells h⁻¹ right after nitrogen limitation. Of particular importance was the use of molasses as a cheap carbon source to produce curdlan in the two-step, fed-batch cultivation. As high as 42 g L⁻¹ of curdlan with a yield of 0.35 g curdlan g⁻¹ total sugar was obtained after 120 h of fed-batch cultivation. Received 20 August 1996/ Accepted in revised form 26 November 1996     

Production of xylitol by Candida peltata

Candida peltata NRRL Y-6888 to ferment xylose to xylitol was evaluated under different fermentation conditions such as pH, temperature, aeration, substrate concentration and in the presence of glucose, arabinose, ethanol, methanol and organic acids. Maximum xylitol yield of 0.56 g g⁻¹ xylose was obtained when the yeast was cultivated at pH 6.0, 28°C and 200 rpm on 50 g L⁻¹ xylose. The yeast produced ethanol (0.41 g g⁻¹ in 40 h) from glucose (50 g L⁻¹) and arabitol (0.55 g g⁻¹ in 87 h) from arabinose (50 g L⁻¹). It preferentially utilized glucose > xylose > arabinose from mixed substrates. Glucose (10 g L⁻¹), ethanol (7.5 g L⁻¹) and acetate (5 g L⁻¹) inhibited xylitol production by 61, 84 and 68%, respectively. Arabinose (10 g L⁻¹) had no inhibitory effect on xylitol production. Received 24 December 1998/ Accepted in revised form 18 March 1999     

Docosapentaenoic acid (C22:5, ω-3) production by Pythium acanthicum

The physiological roles of omega-3 fatty acids, eicosapentaenoic acid and docosahexaenoic acid have been investigated in detail and microbial strains producing these polyunsaturated fatty acids have been characterised. It has recently been suggested that docosapentaenoic acid may have an important role, especially in infant nutrition, and that its positive health effects have been overlooked. Docosapentaenoic acid (C22:5, ω-3) production by a strain of Pythium acanthicum ATCC 18660 was thus investigated. Optimum conditions for growth of P. acanthicum ATCC 18660 and docosapentaenoic acid production were: pH 6.0, temperature 20°C and incubation time, 10 days. Among different saccharides and complex nitrogen sources tested, glucose and sodium glutamate were preferred carbon and nitrogen sources, respectively. Maximum biomass content (10.4 g L⁻¹) and docosapentaenoic acid yield (49.9 mg L⁻¹) were obtained in 10 days. An increase in docosapentaenoic acid volumetric yields to 108–110 mg L⁻¹ was obtained when linseed oil was used to supplement glucose or soy flour-containing medium. Batch feeding of additional glucose or linseed oil further enhanced the docosapentaenoic acid volumetric yield to 132 mg L⁻¹ and 125 mg L⁻¹, respectively, in 14 days. The specific production of docosapentaenoic acid in preliminary experiments ranged from 1.0–5.0 mg g⁻¹ biomass. As conditions were optimised, docosapentaenoic acid specific production titers were generally in the range of 4.0–5.5 mg g⁻¹ and increases in docosapentaenoic acid volumetric production could be attributed to increased biomass production. The limited improvement obtained by modifying culture conditions indicates that increasing volumetric yields of docosapentaenoic acid by modifying culture conditions appears to represent a significant barrier to commercialisation of such a process and suggests a more fundamental manipulation of metabolism and physiology is required. Received 06 November 1997/ Accepted in revised form 10 January 1998     

Continuous production of isopropanol and butanol using <Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> DSM 6423

Clostridium beijerinckii DSM 6423 was studied using different continuous production methods to give maximum and stable production of isopropanol and n-butanol. In a single-stage continuous culture, when wood pulp was added as a cell holding material, we could increase the solvent productivity from 0.47 to 5.52 g L⁻¹ h⁻¹ with the yield of 54% from glucose. The overall solvent concentration of 7.51 g L⁻¹ (39.4% isopropanol and 60.6% n-butanol) with the maximum solvent productivity of 0.84 g L⁻¹ h⁻¹ was obtained with two-stage continuous culture. We were able to run the process for more than 48 overall retention times without losing the ability to produce solvents.     

Growth and bacteriocin production by Enterococcus faecium DPC1146 in batch and continuous culture

Production of the bacteriocin enterocin 1146 (E1146) by Enterococcus faecium DPC1146 was studied in batch and continuous fermentation. Growth was strongly inhibited by lactic acid. In batch fermentations maximum E1146 activity (2.8 MBU L⁻¹) was obtained in 9 h with 20 g L⁻¹ glucose. Increase in initial glucose concentration did not lead to a proportional increase in E1146 activity. A simple linear model was found to be adequate to explain the relationship between specific bacteriocin production rate and specific growth rate in batch fermentations with initial glucose concentration higher than 20 g L⁻¹. Maximum bacteriocin activity (2.9–3.2 MBU L⁻¹) was obtained in continuous fermentations at dilution rates between 0.12 and 0.17 h⁻¹ and specific bacteriocin production rate increased linearly with dilution rate. Received 31 July 1996/ Accepted in revised form 01 November 1996     

Continuous bio-catalytic conversion of sugar mixture to acetone–butanol–ethanol by immobilized <Emphasis Type="Italic">Clostridium acetobutylicum</Emphasis> DSM 792

Continuous production of acetone, n-butanol, and ethanol (ABE) was carried out using immobilized cells of Clostridium acetobutylicum DSM 792 using glucose and sugar mixture as a substrate. Among various lignocellulosic materials screened as a support matrix, coconut fibers and wood pulp fibers were found to be promising in batch experiments. With a motive of promoting wood-based bio-refinery concept, wood pulp was used as a cell holding material. Glucose and sugar mixture (glucose, mannose, galactose, arabinose, and xylose) comparable to lignocellulose hydrolysate was used as a substrate for continuous production of ABE. We report the best solvent productivity among wild-type strains using column reactor. The maximum total solvent concentration of 14.32 g L⁻¹ was obtained at a dilution rate of 0.22 h⁻¹ with glucose as a substrate compared to 12.64 g L⁻¹ at 0.5 h⁻¹ dilution rate with sugar mixture. The maximum solvent productivity (13.66 g L⁻¹ h⁻¹) was obtained at a dilution rate of 1.9 h⁻¹ with glucose as a substrate whereas solvent productivity (12.14 g L⁻¹ h⁻¹) was obtained at a dilution rate of 1.5 h⁻¹ with sugar mixture. The immobilized column reactor with wood pulp can become an efficient technology to be integrated with existing pulp mills to convert them into wood-based bio-refineries.     

Kinetic models for phycocyanin production by high cell density mixotrophic culture of the microalga Spirulina platensis

Phycocyanin production by high cell density cultivation of Spirulina platensis in batch and fed-batch modes in 3.7-L bioreactors with a programmed stepwise increase in light intensity program was investigated. The results showed that the cell density in fed-batch culture (10.2 g L⁻¹) was 4.29-fold that in batch culture (2.38 g L⁻¹), and the total phycocyanin production in the fed-batch culture (0.795 g L⁻¹) was 3.05-fold that in the batch culture (0.261 g L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, phycocyanin formation, as well as glucose consumption was proposed. The data fitted the models well (r ² > 0.99). Furthermore, based on the kinetic models, the potential effects of light limitation and photoinhibition on cell growth and phycocyanin formation can be examined in depth. The models demonstrated that the optimal light intensity for mixotrophic growth of Spirulina platensis in batch or fed-batch cultures using a 3.7-L bioreactor was 80160 μE m⁻² s⁻¹, and the stepwise increase in light intensity can be replaced by a constant light intensity mode. Received 28 July 1998/ Accepted in revised form 8 October 1998     

Environmental parameters affecting xylitol production from sugar cane bagasse hemicellulosic hydrolyzate by Candida guilliermondii

The bioconversion of xylose to xylitol by Candida guilliermondii FTI 20037 cultivated in sugar cane bagasse hemicellulosic hydrolyzate was influenced by cell inoculum level, age of inoculum and hydrolyzate concentration. The maximum xylitol productivity (0.75 g L⁻¹ h⁻¹) occurred in tests carried out with hydrolyzate containing 54.5 g L⁻¹ of xylose, using 3.0 g L⁻¹ of a 24-h-old inoculum. Xylitol productivity and cell concentration decreased with hydrolyzate containing 74.2 g L⁻¹ of xylose. Received 02 February 1996/ Accepted in revised form 15 November 1996     

High alcohol production by repeated batch fermentation using an immobilized osmotolerant Saccharomyces cerevisiae

A repeated batch fermentation system was used to produce ethanol using an osmotolerant Saccharomyces cerevisiae (VS₃) immobilized in calcium alginate beads. For comparison free cells were also used to produce ethanol by repeated batch fermentation. Fermentation was carried for six cycles with 125, 250 or 500 beads using 150, 200 or 250 g glucose L⁻¹ at 30°C. The maximum amount of ethanol produced by immobilized VS₃ using 150 g L⁻¹ glucose was only 44 g L⁻¹ after 48 h, while the amount of ethanol produced by free cells in the first cycle was 72 g L⁻¹. However in subsequent fed batch cultures more ethanol was produced by immobilized cells compared to free cells. The amount of ethanol produced by free cells decreased from 72 g L⁻¹ to 25 g L⁻¹ after the fourth cycle, while that of immobilized cells increased from 44 to 72 g L⁻¹. The maximum amount of ethanol produced by immobilized VS₃ cells using 150, 200 and 250 g glucose L⁻¹ was 72.5, 93 and 87 g ethanol L⁻¹ at 30°C. Journal of Industrial Microbiology & Biotechnology (2000) 24, 222–226. Received 16 September 1999/ Accepted in revised form 22 December 1999     

Batch and continuous cultivation of Anaerobiospirillum succiniciproducens for the production of succinic acid from whey

Batch and continuous cultivation of Anaerobiospirillum succiniciproducens were systematically studied for the production of succinic acid from whey. Addition of 2.5 g l⁻¹ yeast extract and 2.5 g l⁻¹ polypeptone per 10 g l⁻¹ whey was most effective for succinic acid production from both treated and nontreated whey. When 20 g l⁻¹ nontreated whey and 7 g l⁻¹ glucose were used as cosubstrates, the yield and productivity of succinic acid reached at the end of fermentation were 95% and 0.46 g (l h)⁻¹, respectively. These values were higher than those obtained using nontreated whey alone [93% and 0.24 g (l h)⁻¹ for 20 g l⁻¹ whey]. Continuous fermentation of A. succiniciproducens at an optimal dilution rate resulted in the production of succinic acid with high productivity [1.35 g (l h)⁻¹], high conversion yield (93%), and higher ratio of succinic acid to acetic acid (5.1:1) from nontreated whey. Received: 23 July 1999 / Received revision: 17 November 1999 / Accepted: 24 December 1999     

Control of salt gland activity in the hatchling green sea turtle, Chelonia mydas

 We studied the control of salt gland secretion in hatchling Chelonia mydas. The threshold salt load to activate salt secretion was between 400 μmol NaCl 100 g bodymass (BM)⁻¹ and 600 μmol NaCl 100 g BM⁻¹, which caused an increase in plasma sodium concentration of 13% to 19%. Following a salt load of 2700 μmol NaCl 100 g BM⁻¹, salt gland secretion commenced in 12 ± 1.3 min and reached maximal secretory concentration within 2–7 min. Maximal secretory rate of a single gland averaged 415 μmol Na 100 g BM⁻¹ h⁻¹. Plasma sodium concentration and total osmotic concentration after salt loading were significantly higher than pretreatment values within 2 min. Adrenalin (25 μg kg BM⁻¹) and the cholinergic agonist methacholine (1 mg kg BM⁻¹) inhibited salt gland activity. Atropine (10 mg kg BM⁻¹) reversed methacholine inhibition and stimulated salt gland secretion when administered with a subthreshold salt load. Arginine vasotocin produced a transient reduction in sodium secretion by the active gland, while atrial natriuretic factor, vasoactive intestinal peptide and neuropeptide Y had no measurable effect on any aspect of salt gland secretion. Our results demonstrated that secretion of the salt gland in C. mydas can be modified by neural and hormonal chemicals in vivo and that the cholinergic and adrenergic stimulation of an exocrine gland do not appear to have the typical, antagonist actions on the chelonian salt gland. Accepted: 28 September 1999     

Production of d-hydantoinase by halophilic Pseudomonas sp. NCIM 5109

About 1000 bacterial colonies isolated from sea water were screened for their ability to convert dl-5-phenylhydantoin to d(−)N-carbamoylphenylglycine as a criterion for the determination of hydantoinase activity. The strain M-1, out of 11 hydantoinase-producing strains, exhibited the maximum ability to convert dl-5-phenylhydantoin to d(−)N-carbamoylphenylglycine. The strain M-1 appeared to be a halophilic Pseudomonas sp. according to morphological and physiological characteristics. Optimization of the growth parameters revealed that nutrient broth with 2% NaCl was the preferred medium for both biomass and enzyme production. d-Hydantoinase of strain M-1 was not found to be inducible by the addition of uracil, dihydrouracil, β-alanine etc. The optimum temperature for enzyme production was about 25 °C and the organism showed a broad pH optimum (pH 6.5–9.0) for both biomass and hydantoinase production. The organism seems to have a strict requirement of NaCl for both growth and enzyme production. The optimum pH and temperature of enzyme activity were 9–9.5 and 30 °C respectively. The biotransformation under the alkaline conditions allowed the conversion of 80 g l⁻¹ dl-5-phenylhydantoin to 82 g l⁻¹ d(−)N-carbamoylphenylglycine within 24 h with a molar yield of 93%. Received: 15 September 1997 / Received revision: 5 January 1998 / Accepted: 6 January 1998     

Increased astaxanthin production by a Phaffia rhodozyma mutant grown on date juice from Yucca fillifera

The wild strain and the astaxanthin-overproducing mutant strain 25–2 of Phaffia rhodozyma were analyzed in order to assess their ability to grow and synthesize astaxanthin in a minimal medium composed of g L⁻¹: KH₂PO₄ 2.0; MgSO₄ 0.5; CaCl₂ 0.1; urea 1.0 and supplemented with date juice of Yucca fillifera as a carbon source (yuca medium). The highest astaxanthin production (6170 μg L⁻¹) was obtained at 22.5 g L⁻¹ of reducing sugars. The addition of yeast extract to the yuca medium at concentrations of 0.5–3.0 g L⁻¹ inhibited astaxanthin synthesis. The yuca medium supported a higher production of astaxanthin, 2.5-fold more than that observed in the YM medium. Journal of Industrial Microbiology & Biotechnology (2000) 24, 187–190. Received 14 July 1999/ Accepted in revised form 02 December 1999