Automatic diluter for bacteriological samples.

The described apparatus, carrying 190 tubes, allows automatic and aseptic dilution of liquid or suspended-solid samples. Serial 10-fold dilutions are programmable from 10(-1) to 10(-9) and are carried out in glass tubes with screw caps and split silicone septa. Dilution assays performed with strains of Escherichia coli and Bacillus stearothermophilus permitted efficient conditions for sterilization of the needle to be defined and showed that the automatic dilutions were as accurate and as reproducible as the most rigorous conventional dilutions.     

Automatic diluter for bacteriological samples

The described apparatus, carrying 190 tubes, allows automatic and aseptic dilution of liquid or suspended-solid samples. Serial 10-fold dilutions are programmable from 10(-1) to 10(-9) and are carried out in glass tubes with screw caps and split silicone septa. Dilution assays performed with strains of Escherichia coli and Bacillus stearothermophilus permitted efficient conditions for sterilization of the needle to be defined and showed that the automatic dilutions were as accurate and as reproducible as the most rigorous conventional dilutions.     

Counting viable Azotobacter in vertisols

In counting Azotobacter in vertisols by the soil dilution and spread-plating method, mean colony counts/plate did not decrease in proportion to the dilution factor and consequently derived counts of Azobacter cells/g soil decreased with increasing dilution of the soil suspension. This non-proportionality phenomenon was analysed in several experiments with six soils. Conformity to the Poisson distribution for counts on parallel plates was measured by Fisher's index of dispersion (χ²), which proved too high (P<.05) at lower dilutions, indicating inaccurately low mean colony counts. At highest dilutions, proportional errors increased resulting in less precise estimates of means, because with a Poisson distribution the standard deviation is equal to the square root of the mean, and the multiplication factor for derived counts/g soil is greatest at highest dilutions. By varying both plate surface area and dilution factor, results indicated that the non-proportionality phenomenon is caused by crowding at lower dilutions increasing the probability of colony coincidence on the plates. Graphical analysis of results of several dilution series indicated that derived counts are best based on dilutions giving 10–40 colonies/9 cm diameter plate, which is best achieved from two-fold dilution series.     

A simple endpoint dilution method for evaluating serum used for cell culture

A simple endpoint dilution method for evaluating foetal calf serum quality is described. The test uses a series of doubling dilutions of cells on microtitre trays with the test sera added to replicate dilution series. After five to six days of incubation the cells are stained with crystal violet and the end points read macroscopically. The cell growth-promoting property of serum may be expressed as a reciprocal of the cell dilution resulting in an approximately 50% coverage of cells.     

真空负压和常规ABC法显示HPV—1抗原的应用比较

应用真空负压 ABC 法显示 HPV-1抗原比常规 ABC 法效果好,敏感性高,时间短,整个过程只需一个多小时,阳性物明显突出,颗粒均匀,色泽鲜艳,呈黄棕色,背景清晰等优点。还可提高抗体的稀释度,降低成本。与微波技术相比,具有设备简单,易于操作,安全可靠,不受条件限制,经对26例尖锐湿疣的病例进行多层次稀释度的研究,取得了满意的结果,认为该法值得推广应用。     

Evaluation of commercial presence-absence test kits for detection of total coliforms, Escherichia coli, and other indicator bacteria.

Evaluations of several commercial presence-absence (P-A) test kits were performed over a 6-month period in 1990 by using the Ontario Ministry of the Environment (MOE) P-A test for comparison. The general principles of the multiple-tube fermentation technique formed the basis for conducting the product evaluations. Each week, a surface water sample was diluted and inoculated into 25 99-ml dilution blanks for each of three dilutions. The inoculated dilution blanks from each dilution series were randomly sorted into sets of five. Three of these sets were inoculated into the P-A test kits or vice versa, as required. The other two sets were passed through membrane filters, and one set of five membrane filters was placed onto m-Endo agar LES to give replicate total coliform counts and the other set was placed onto m-TEC agar to give replicate fecal coliform results. A statistical analysis of the results was performed by a modified logistic transform method, which provided an improved way to compare binary data obtained from the different test kits. The comparative test results showed that three of the four commercial products tested gave very good levels of recovery and that the fourth commercial product gave only fair levels of recovery when the data were compared with the data from MOE P-A tests and membrane filter tests. P-A bottles showing positive results after 18 h of incubation that were subcultured immediately in ECMUG tubes frequently could be confirmed as containing total coliforms, fecal coliforms, or Escherichia coli after 6 h of incubation; thus, the total incubation time was only 24 h.(ABSTRACT TRUNCATED AT 250 WORDS)     

ROLL TUBES AND AGAR STRIP TUBES FOR THE BACTERIAL COLONY COUNT OF MILK

SUMMARY: Roll-tube colony counts, using the Astell equipment, were lower than the corresponding Petri dish counts with 27 out of 31 raw milks (87%). The difference between the counts by the two methods was greater than 25% of the plate count for 12 (39%) of the samples.
When the same dilution of milk was used for both strip-tube and plate colony counts, about equal numbers of samples gave counts from the strip tubes above and below about the colony count from plates. When, in order to obtain a more reasonable strip-tube count, the plates and strip tubes were prepared from different dilutions of the milk, the counts from the latter were, with only 3 exceptions out of 35 milks, below those from the former. The difference between the counts was greater than 25% of the plate count for 15 (43%) of the milks, a figure similar to that obtained in comparing roll-tube and plate colony counts.     

Accuracy of a Plant-Infection Technique for Counting Populations of Rhizobium trifolii

A "plant-infection" technique for identification and estimation of populations of Rhizobium is described and compared with petri dish colony counts of the same bacterial populations. Provided that bacterial suspensions are agitated thoroughly, dilutions made at 4 C, and test plants grown on agar, the plant-infection technique is an accurate method of estimating R. trifolii in pure culture or when added to soil. The results are discussed in relation to previous investigations of the subject. Tables are presented which, when applied to the distribution of positive (nodulated) test plants in either fivefold or tenfold dilution series, permit calculation of most probable numbers, and confidence limits are stated.     

Simple method for quantitation of viable mycoplasmas.

A rapid, simple, and inexpensive method for quantitation of viable mycoplasmas is described. Serial dilutions were made in sterile microtiter plates with standard microtiter equipment. The results were multiplied by a factor of 2.38 to obtain colony-forming units comparable to those obtained with the laborious glass pipette-tube dilution method.     

Estimation of microbial densities from dilution count experiments

Although dilution counts have been widely used in quantitative microbiology, their interpretation has always been widely discussed both in microbiology and in applied statistics. Maximum-likelihood (most-probable-number) methods hae generally been used to estimate densities from dilution experiments. It has not been widely recognized that these methods are intrinsically and statistically biased at the sample sizes used in microbiology. This paper presents an analysis of proposed method for correction of such biases, and the method was found to be robust for moderate deviations from Poisson behavior. For analyses at greater variance with the Poisson assumptions, the use of the Spearman-Karber method is analyzed and shown to yield an estimate of density of lesser bias than that produced by the most-probable-number method. Revised methods of constructing confidence limits proposed by Loyer and Hamilton (M.W. Loyer and M.A. Hamilton, Biometrics 40:907-916, 1984) are also discussed, and charts for the three- and four-decimal dilution series with five tubes per dilution are presented.     

Estimation of microbial densities from dilution count experiments.

Although dilution counts have been widely used in quantitative microbiology, their interpretation has always been widely discussed both in microbiology and in applied statistics. Maximum-likelihood (most-probable-number) methods hae generally been used to estimate densities from dilution experiments. It has not been widely recognized that these methods are intrinsically and statistically biased at the sample sizes used in microbiology. This paper presents an analysis of proposed method for correction of such biases, and the method was found to be robust for moderate deviations from Poisson behavior. For analyses at greater variance with the Poisson assumptions, the use of the Spearman-Karber method is analyzed and shown to yield an estimate of density of lesser bias than that produced by the most-probable-number method. Revised methods of constructing confidence limits proposed by Loyer and Hamilton (M.W. Loyer and M.A. Hamilton, Biometrics 40:907-916, 1984) are also discussed, and charts for the three- and four-decimal dilution series with five tubes per dilution are presented.     

A simple and reliable method for clinical assessment of odor thresholds

We investigated whether presenting of dilutions of phenyl ethyl alcohol at random succession according to the method of constant stimuli can replace the standard procedure of presenting a various number of dilutions in a staircase paradigm. Forty-six men and 44 women, aged 19-76 years, participated in this study. Phenyl ethyl alcohol was diluted in a ratio of 1:2, starting from 4%. Presentation of the odorant followed a three-alternative, temporal forced-choice paradigm with two blanks in addition to the odorant. Twenty dilutions were administered in a randomized order. Odor threshold was obtained by logistic regression of the correct and incorrect identifications of the probe containing the odorant. Thresholds were also calculated on the basis of the first 16 dilution steps only. Results from these procedures were compared with 'gold-standard' threshold assessment employing a three-alternative, temporal forced-choice staircase paradigm with seven reversals using 16 dilutions of phenyl ethyl alcohol. The method of constant stimuli took a shorter and less variable testing time than the staircase technique. The use of 20 dilution steps provided no better results than the use of 16 steps. The method of constant stimuli exhibited a good test-retest reliability (r = 0.7; P < 0.001) comparable to that of the staircase method and provided unbiased results highly correlated (r = 0.8; P < 0.001) with those of the staircase technique with similar inter-test variability. Applying 16 dilutions (1:2 steps) of phenyl ethyl alcohol at random succession in a three-alternative, temporal forced-choice paradigm is thus a simple and reliable procedure for the reproducible assessment of odor thresholds that may be contemplated as an alternative to the 'gold-standard' staircase method of clinical odor threshold assessment.     

A Note on Dilution Assays with Errors in Dilutions

Dilution assays involve a number of steps in the preparation of the dilutions and the delivery of the diluent. These steps may give rise to dilution errors. If assays are treated as if the nominal dilutions have been used then under estimates of micro-organism density may occur. In this paper models for dilution errors are introduced.     

Sampling culturable heterotrophs from microcosms: a statistical analysis.

The contributions of different sources of error in sampling mixed and unmixed bacterial microcosms were evaluated by using analysis of variance. Culturable heterotrophic bacteria from a turbid freshwater impoundment were sampled from 9-liter tanks that were unagitated or mixed with magnetic stirrers or pumps and from dilution bottles that were unagitated or agitated with a mechanical shaker. Axenic cultures of Enterobacter aerogenes were also sampled from manually shaken test tubes. In both agitated and unagitated tanks and in unagitated dilution bottles, dilutions made from the same sampling pipette were significantly different, showing a clumping of bacteria on the scale of millimeters. Also, microcosms within a single experiment differed from one another by a large margin. Dilution mean squares and tank or bottle mean squares were homogeneous for all types of tanks and unagitated bottles, indicating that the gentle mixing provided by pumps and stir bars did not reduce either millimeter scale or intermicrocosm variability over what prevailed in unagitated microcosms. By contrast, the vigorously shaken bottles and test tubes showed no millimeter scale variability. Intermicrocosm variability was undetectable in test tubes and two orders of magnitude less in shaken bottles than in unshaken bottles. When these facts are coupled with the inherent statistical advantage of replicating large rather than small experimental units, it is concluded that sampling error in the enumeration of aquatic bacteria in microcosms will be reduced by using numerous, small, violently agitated microcosms with a minimum of subsampling per microcosm.     

Investigations on Some Attributes of the Likelihood Function for MPN Determination

The paper investigates the likelihood function to determine the MPN (Most Probable Number as a measure of concentration in the virology), dependent on several parameters. Taking only ‘probable’ result schemes into the MPN-tables they would become much shorter. There are suggested two conditions for the selection of the result schemes, given and compared by some tables together with a mathematical foundation of the number of the selected schemes. Some tables and a theorem about success probabilities of the result schemes point out their changes under different conditions (number of tubes, number of dilutions, dilution ratio), and make it possible to estimate success probabilities of result schemes not selected by the more restricted condition.     

Estimation of the most probable number with a programable pocket calculator.

The most-probable-number method has many potential applications, particularly if many tubes per dilution and many dilution levels are used. Increasing the number of cultures is possible with modern automatic and semiautomatic equipment. However, available tables are not sufficiently detailed to handle data from a large number of culture tubes used in an assay. This paper provides a computer program capable of handling the necessary arithmetic and written for a hand-held, advanced programable calculator.     

Interval estimation of the density of organisms using a serial-dilution experiment

The serial-dilution assay is a standard microbiological method for estimating the density of organisms in a solution. The commonly used interval-estimation procedures of Woodward and deMan are described and compared. A new method for the calculation of two-sided confidence intervals, which is superior to the standard procedures, is presented. The computations are illustrated for a decimal dilution assay with three samples at each of three dilutions.     

A simple method for determining the sensitivity of micro-organisms to serial dilutions of antibiotics

Summary At this laboratory the routine sensitivity tests of micro-organisms against sulfathiazol and antibiotics have been performed in plastic dishes for half a year. The dishes are cleaned and sterilized in the same way as bacteriological glassware. The use of these dishes offers some advantages over other conventional dilution methods employing tubes or Petri dishes with solid media: the sensitivity to serial dilutions of one antibiotic may be measured in one and the same plate, and in this way a considerable amount of glassware and of space in the incubator may be saved; the readings are easily done and distinct. It has been demonstrated that sensitivity tests with two standard strains against sulfathiazol and various antibiotics may be reproduced with the same endpoints.     

Sampling Culturable Heterotrophs from Microcosms: a Statistical Analysis

The contributions of different sources of error in sampling mixed and unmixed bacterial microcosms were evaluated by using analysis of variance. Culturable heterotrophic bacteria from a turbid freshwater impoundment were sampled from 9-liter tanks that were unagitated or mixed with magnetic stirrers or pumps and from dilution bottles that were unagitated or agitated with a mechanical shaker. Axenic cultures of Enterobacter aerogenes were also sampled from manually shaken test tubes. In both agitated and unagitated tanks and in unagitated dilution bottles, dilutions made from the same sampling pipette were significantly different, showing a clumping of bacteria on the scale of millimeters. Also, microcosms within a single experiment differed from one another by a large margin. Dilution mean squares and tank or bottle mean squares were homogeneous for all types of tanks and unagitated bottles, indicating that the gentle mixing provided by pumps and stir bars did not reduce either millimeter scale or intermicrocosm variability over what prevailed in unagitated microcosms. By contrast, the vigorously shaken bottles and test tubes showed no millimeter scale variability. Intermicrocosm variability was undetectable in test tubes and two orders of magnitude less in shaken bottles than in unshaken bottles. When these facts are coupled with the inherent statistical advantage of replicating large rather than small experimental units, it is concluded that sampling error in the enumeration of aquatic bacteria in microcosms will be reduced by using numerous, small, violently agitated microcosms with a minimum of subsampling per microcosm.     

A modified capillary assay for chemotaxis

Summary A modification is described of the capillary assay for chemotaxis. It employs a 96-well dilution plate and its cover. Capillary tubes are inserted through the cover and are supported by small rubber collars. The method is faster and less tedious and gives more precise results than earlier methods.