Subdividing repressor function: DNA binding affinity, selectivity, and allostery can be altered by amino acid substitution of nonconserved residues in a LacI/GalR homologue

Many mutations that impact protein function occur at residues that do not directly contact ligand. To understand the functional contributions from the sequence that links the DNA-binding and regulatory domains of the LacI/GalR homologues, we have created a chimeric protein (LLhP), which comprises the LacI DNA-binding domain, the LacI linker, and the PurR regulatory domain. Although DNA binding site residues are identical in LLhP and LacI, thermodynamic measurements of DNA binding affinity show that LLhP does not discriminate between alternative DNA ligands as well as LacI. In addition, small-angle scattering experiments show that LLhP is more compact than LacI. When DNA is released, LacI shows a 20 A increase in length that was previously attributed to unfolding of the linker. This change is not seen in apo-LLhP, even though the linker sequences of the two proteins are identical. Together, results indicate that long-range functional and structural changes are propagated across the interface that forms between the linker and regulatory domain. These changes could be mediated via the side chains of several linker residues that contact the regulatory domains of the naturally occurring proteins, LacI and PurR. Substitution of these residues in LLhP leads to a range of functional effects. Four variants exhibit altered affinity for DNA, with no changes in selectivity or allosteric response. Another two result in proteins that bind operator DNA with very low affinity and no allosteric response, similar to LacI binding nonspecific DNA sequences. Two more substitutions simultaneously diminish affinity, enhance allostery, and profoundly alter DNA ligand selectivity. Thus, positions within the linker can be varied to modulate different aspects of repressor function.     

Conformational changes of ribose-binding protein and two related repressors are tailored to fit the functional need

The structures and conformational changes of the periplasmic ribose-binding protein and two repressors, PurR and LacI, were compared. Although the closed, ligand-bound structures of the three proteins are very similar, they differ greatly in the degree and direction in which they open, as well as in the amount of internal rearrangement within the domains during that process. Water molecules and a relatively symmetrical inter-domain connection region assist in the large opening observed for the binding protein, while the design of the repressors appears to preclude such dramatic movements. The dimeric nature of the latter proteins, an important aspect in their binding of pseudo-symmetrical DNA sequences, also appears to be a determinant in the allowed motion. Slight differences in the structure of PurR and LacI explain how they can converge to a similar DNA-binding state in response to different binding states of their small molecule effector.     

Parallel evolution of ligand specificity between LacI/GalR family repressors and periplasmic sugar-binding proteins

The bacterial LacI/GalR family repressors such as lactose operon repressor (LacI), purine nucleotide synthesis repressor (PurR), and trehalose operon repressor (TreR) consist of not only the N-terminal helix-turn-helix DNA-binding domain but also the C-terminal ligand-binding domain that is structurally homologous to periplasmic sugar-binding proteins. These structural features imply that the repressor family evolved by acquiring the DNA-binding domain in the N-terminal of an ancestral periplasmic binding protein (PBP). Phylogenetic analysis of the LacI/GalR family repressors and their PBP homologues revealed that the acquisition of the DNA-binding domain occurred first in the family, and ligand specificity then evolved. The phylogenetic tree also indicates that the acquisition occurred only once before the divergence of the major lineages of eubacteria, and that the LacI/GalR and the PBP families have since undergone extensive gene duplication/loss independently along the evolutionary lineages. Multiple alignments of the repressors and PBPs furthermore revealed that repressors and PBPs with the same ligand specificity have the same or similar residues in their binding sites. This result, together with the phylogenetic relationship, demonstrates that the repressors and the PBPs individually acquired the same ligand specificity by homoplasious replacement, even though their genes are encoded in the same operon.     

Lactose repressor hinge domain independently binds DNA

The short 8–10 amino acid “hinge” sequence in lactose repressor (LacI), present in other LacI/GalR family members, links DNA and inducer‐binding domains. Structural studies of full‐length or truncated LacI‐operator DNA complexes demonstrate insertion of the dimeric helical “hinge” structure at the center of the operator sequence. This association bends the DNA ～40° and aligns flanking semi‐symmetric DNA sites for optimal contact by the N‐terminal helix‐turn‐helix (HtH) sequences within each dimer. In contrast, the hinge region remains unfolded when bound to nonspecific DNA sequences. To determine ability of the hinge helix alone to mediate DNA binding, we examined (i) binding of LacI variants with deletion of residues 1–50 to remove the HtH DNA binding domain or residues 1–58 to remove both HtH and hinge domains and (ii) binding of a synthetic peptide corresponding to the hinge sequence with a Val52Cys substitution that allows reversible dimer formation via a disulfide linkage. Binding affinity for DNA is orders of magnitude lower in the absence of the helix‐turn‐helix domain with its highly positive charge. LacI missing residues 1–50 binds to DNA with ～4‐fold greater affinity for operator than for nonspecific sequences with minimal impact of inducer presence; in contrast, LacI missing residues 1–58 exhibits no detectable affinity for DNA. In oxidized form, the dimeric hinge peptide alone binds to O1 and nonspecific DNA with similarly small difference in affinity; reduction to monomer diminished binding to both O1 and nonspecific targets. These results comport with recent reports regarding LacI hinge interaction with DNA sequences.     

Ion concentration and temperature dependence of DNA binding: comparison of PurR and LacI repressor proteins.

Purine repressor (PurR) binding to specific DNA is enhanced by complexing with purines, whereas lactose repressor (LacI) binding is diminished by interaction with inducer sugars despite 30% identity in their protein sequences and highly homologous tertiary structures. Nonetheless, in switching from low- to high-affinity DNA binding, these proteins undergo a similar structural change in which the hinge region connecting the DNA and effector binding domains folds into an alpha-helix and contacts the DNA minor groove. The differences in response to effector for these proteins should be manifest in the polyelectrolyte effect which arises from cations displaced from DNA by interaction with positively charged side chains on a protein and is quantitated by measurement of DNA binding affinity as a function of ion concentration. Consistent with structural data for these proteins, high-affinity operator DNA binding by the PurR-purine complex involved approximately 15 ion pairs, a value significantly greater than that for the corresponding state of LacI (approximately 6 ion pairs). For both proteins, however, conversion to the low-affinity state results in a decrease of approximately 2-fold in the number of cations released per dimeric DNA binding site. Heat capacity changes (DeltaC(p)) that accompany DNA binding, derived from buried apolar surface area, coupled folding, and restriction of motional freedom of polar groups in the interface, also reflect the differences between these homologous repressor proteins. DNA binding of the PurR-guanine complex is accompanied by a DeltaC(p) (-2.8 kcal mol(-1) K(-1)) more negative than that observed previously for LacI (-0.9 to -1.5 kcal mol(-1) K(-1)), suggesting that more extensive protein folding and/or enhanced structural rigidity may occur upon DNA binding for PurR compared to DNA binding for LacI. The differences between these proteins illustrate plasticity of function despite high-level sequence and structural homology and undermine efforts to predict protein behavior on the basis of such similarities.     

Engineered disulfide linking the hinge regions within lactose repressor dimer increases operator affinity, decreases sequence selectivity, and alters allostery.

The hinge domain encompasses amino acids 51-60 of lactose repressor (LacI) and plays an important role in its regulatory interaction with operator DNA. This segment makes both hinge-DNA and hinge-hinge' contacts that are critical to DNA binding. Furthermore, this small region serves as a central element in communicating the allosteric response to inducer. Introducing a disulfide bond between partner hinges within a dimer via the mutation V52C results in a protein that has increased affinity for O(1) operator DNA compared to wild-type LacI and abolishes allosteric response to inducer [Falcon, C. M., Swint-Kruse, L., and Matthews, K. S. (1997) J. Biol. Chem. 272, 26818]. We have established that this high affinity is maintained for the disulfide-linked protein even when symmetry and half-site spacing within the operator region are altered, whereas binding by the reduced protein, as for wild-type LacI, is severely diminished by these alterations. Interestingly, the allosteric response to inducer for V52C-oxidized remains intact for a small group of operator variants. Temperature studies demonstrate that the presence of the disulfide alters the thermodynamics of the protein-DNA interaction, with a DeltaC(p) of significantly smaller magnitude compared to wild-type LacI. The results presented here establish the hinge region as an important element not only for LacI high-affinity operator binding but also for the essential communication between ligand binding domains. Moreover, the results confirm that DNA sequence/conformation can profoundly influence allostery for this prototypic regulatory protein.     

Comparison of simulated and experimentally determined dynamics for a variant of the Lacl DNA-binding domain, Nlac-P.

Recent advances in the experimentally determined structures and dynamics of the domains within LacI provide a rare context for evaluating dynamics calculations. A 1500-ps trajectory was simulated for a variant of the LacI DNA-binding domain, which consists of the first three helices in LacI and the hinge helix of the homologous PurR. Order parameters derived from dynamics simulations are compared to those obtained for the LacI DNA-binding domain with 15N relaxation NMR spectroscopy (Slijper et al., 1997. Biochemistry. 36:249-254). The MD simulations suggest that the unstructured loop between helices II and III does not exist in a discrete state under the conditions of no salt and neutral pH, but occupies a continuum of states between the DNA-bound and free structures. Simulations also indicate that the unstructured region between helix III and the hinge helix is very mobile, rendering motions of the hinge helix essentially independent of the rest of the protein. Finally, the alpha-helical hydrogen bonds in the hinge helix are broken after 1250 ps, perhaps as a prelude to helix unfolding.     

Plasticity of quaternary structure: twenty-two ways to form a LacI dimer

The repressor proteins of the LacI/GalR family exhibit significant similarity in their secondary and tertiary structures despite less than 35% identity in their primary sequences. Furthermore, the core domains of these oligomeric repressors, which mediate dimerization, are homologous with the monomeric periplasmic binding proteins, extending the issue of plasticity to quaternary structure. To elucidate the determinants of assembly, a structure-based alignment has been created for three repressors and four periplasmic binding proteins. Contact maps have also been constructed for the three repressor interfaces to distinguish any conserved interactions. These analyses show few strict requirements for assembly of the core N-subdomain interface. The interfaces of repressor core C-subdomains are well conserved at the structural level, and their primary sequences differ significantly from the monomeric periplasmic binding proteins at positions equivalent to LacI 281 and 282. However, previous biochemical and phenotypic analyses indicate that LacI tolerates many mutations at 281. Mutations at LacI 282 were shown to abrogate assembly, but for Y282D this could be compensated by a second-site mutation in the core N-subdomain at K84 to L or A. Using the link between LacI assembly and function, we have further identified 22 second-site mutations that compensate the Y282D dimerization defect in vivo. The sites of these mutations fall into several structural regions, each of which may influence assembly by a different mechanism. Thus, the 360-amino acid scaffold of LacI allows plasticity of its quaternary structure. The periplasmic binding proteins may require only minimal changes to facilitate oligomerization similar to the repressor proteins.     

Operator DNA sequence variation enhances high affinity binding by hinge helix mutants of lactose repressor protein

The mechanism by which genetic regulatory proteins discern specific target DNA sequences remains a major area of inquiry. To explore in more detail the interplay between DNA and protein sequence, we have examined binding of variant lac operator DNA sequences to a series of mutant lactose repressor proteins (LacI). These proteins were altered in the C-terminus of the hinge region that links the N-terminal DNA binding and core sugar binding domains. Variant operators differed from the wild-type operator, O(1), in spacing and/or symmetry of the half-sites that contact the LacI N-terminal DNA binding domain. Binding of wild-type and mutant proteins was affected differentially by variations in operator sequence and symmetry. While the mutant series exhibits a 10(4)-fold range in binding affinity for O(1) operator, only a approximately 20-fold difference in affinity is observed for a completely symmetric operator, O(sym), used widely in studies of the LacI protein. Further, DNA sequence influenced allosteric response for these proteins. Binding of this LacI mutant series to other variant operator DNA sequences indicated the importance of symmetry-related bases, spacing, and the central base pair sequence in high affinity complex formation. Conformational flexibility in the DNA and other aspects of the structure influenced by the sequence may establish the binding environment for protein and determine both affinity and potential for allostery.     

Glycine insertion in the hinge region of lactose repressor protein alters DNA binding.

Amino acid alterations were designed at the C terminus of the hinge segment (amino acids approximately 51-59) that links two functional domains within lactose repressor protein (LacI). Gly was introduced between Gly(58) and Lys(59) to generate Gly(58+1); Gln(60) was changed to Gly or Pro, and up to three additional glycines were inserted following Gln(60) --> Gly. All mutant proteins exhibited purification behavior, CD spectra, assembly state, and inducer binding properties similar to wild-type LacI and only small differences in trypsin proteolysis patterns. In contrast, significant differences were observed in DNA binding properties. Gly(58+1) exhibited a decrease of approximately 100-fold in affinity for O(1) operator, and sequential Gly insertion C-terminal to Gln(60) --> Gly resulted in progressively decreased affinity for O(1) operator, approaching nonspecific levels for insertion of >/=2 glycines. Where sufficient affinity for O(1) operator existed, decreased binding to O(1) in the presence of inducer indicated no disruption in the allosteric response for these proteins. Collectively, these results indicate that flexibility and/or spacing between the core and N-terminal domains did not significantly affect folding or assembly, but these alterations in the hinge domain profoundly altered affinity of the lactose repressor protein for its wild-type target sequence.     

Extrinsic interactions dominate helical propensity in coupled binding and folding of the lactose repressor protein hinge helix

A significant number of eukaryotic regulatory proteins are predicted to have disordered regions. Many of these proteins bind DNA, which may serve as a template for protein folding. Similar behavior is seen in the prokaryotic LacI/GalR family of proteins that couple hinge-helix folding with DNA binding. These hinge regions form short alpha-helices when bound to DNA but appear to be disordered in other states. An intriguing question is whether and to what degree intrinsic helix propensity contributes to the function of these proteins. In addition to its interaction with operator DNA, the LacI hinge helix interacts with the hinge helix of the homodimer partner as well as to the surface of the inducer-binding domain. To explore the hierarchy of these interactions, we made a series of substitutions in the LacI hinge helix at position 52, the only site in the helix that does not interact with DNA and/or the inducer-binding domain. The substitutions at V52 have significant effects on operator binding affinity and specificity, and several substitutions also impair functional communication with the inducer-binding domain. Results suggest that helical propensity of amino acids in the hinge region alone does not dominate function; helix-helix packing interactions appear to also contribute. Further, the data demonstrate that variation in operator sequence can overcome side chain effects on hinge-helix folding and/or hinge-hinge interactions. Thus, this system provides a direct example whereby an extrinsic interaction (DNA binding) guides internal events that influence folding and functionality.     

Crystallization and preliminary X-ray studies on the co-repressor binding domain of the Escherichia coli purine repressor.

The purine repressor is a putative helix-turn-helix DNA-binding protein that regulates several genetic loci important in purine and pyrimidine metabolism in Escherichia coli. The protein is composed of two domains, an N-terminal DNA-binding domain and a C-terminal core that binds the purine co-repressors, guanine and hypoxanthine. The co-repressor binding domain (residues 53 to 341) has been crystallized from polyethylene glycol 600-MgCl2 solutions. They are of the monoclinic form, space group P2(1), with a = 38.2 A, b = 125.7 A, c = 61.8 A and beta = 100.2 degrees. They diffract to a resolution of at least 2.2 A and contain two monomers per asymmetric unit. The importance of the structural determination of this domain is underscored by the high degree of sequence homology displayed within the effector binding sites among a sub-class of helix-turn-helix proteins, of which LacI and GalR are members. The structure of the PurR co-repressor binding domain will provide a high resolution view of one such domain and could serve as a possible model for future effector site structural determinations. Perhaps more important will be this structure's contribution to the further understanding of how protein-DNA interactions are modulated.     

Thermodynamic analysis of mutant lac repressors

The lactose (lac) repressor is an allosteric protein that can respond to environmental changes. Mutations introduced into the DNA binding domain and the effector binding pocket affect the repressor's ability to respond to its environment. We have demonstrated how the observed phenotype is a consequence of altering the thermodynamic equilibrium constants. We discuss mutant repressors, which (1) show tighter repression; (2) induce with a previously noninducing species, orthonitrophenyl-β-d-galactoside; and (3) transform an inducible switch to one that is corepressed. The ability of point mutations to change multiple thermodynamic constants, and hence drastically alter the repressor's phenotype, shows how allosteric proteins can perform a wide array of similar yet distinct functions such as that exhibited in the Lac/Gal family of bacterial repressors.     

Crystal structure of the effector-binding domain of the trehalose-repressor of Escherichia coli, a member of the LacI family, in its complexes with inducer trehalose-6-phosphate and noninducer trehalose.

The crystal structure of the Escherichia coli trehalose repressor (TreR) in a complex with its inducer trehalose-6-phosphate was determined by the method of multiple isomorphous replacement (MIR) at 2.5 A resolution, followed by the structure determination of TreR in a complex with its noninducer trehalose at 3.1 A resolution. The model consists of residues 61 to 315 comprising the effector binding domain, which forms a dimer as in other members of the LacI family. This domain is composed of two similar subdomains each consisting of a central beta-sheet sandwiched between alpha-helices. The effector binding pocket is at the interface of these subdomains. In spite of different physiological functions, the crystal structures of the two complexes of TreR turned out to be virtually identical to each other with the conformation being similar to those of the effector binding domains of the LacI and PurR in complex with their effector molecules. According to the crystal structure, the noninducer trehalose binds to a similar site as the trehalose portion of trehalose-6-phosphate. The binding affinity for the former is lower than for the latter. The noninducer trehalose thus binds competitively to the repressor. Unlike the phosphorylated inducer molecule, it is incapable of blocking the binding of the repressor headpiece to its operator DNA. The ratio of the concentrations of trehalose-6-phosphate and trehalose thus is used to switch between the two alternative metabolic uses of trehalose as an osmoprotectant and as a carbon source.     

Integrated insights from simulation, experiment, and mutational analysis yield new details of LacI function

Protein structural change underlies many signal transduction processes. Although end-state structures are known for various allosteric proteins, intermediates are difficult to observe. Recently, targeted molecular dynamics simulation (TMD) was used to examine the conformational transition and predict relevant intermediates for wild-type lactose repressor (LacI). A catalog of involved residues suggests that the transition of this homodimer is asymmetric and that K84 is a prominent participant in the dynamic N-subdomain interface. Previous experiments indicated that hydrophobic substitutions at position 84 engender slowed, biphasic inducer binding kinetics, which might reflect the same phenomena observed in TMD. Here, we report biochemical confirmation that DNA and inducer binding remain allosterically linked in K84A and K84L, albeit with a differential smaller than that found in wild-type LacI. Other features of these mutant proteins are consistent with an allosteric conformational shift that approximates that of the wild type. As a consequence, these repressors can be utilized to explore an unanswered question about LacI function: How many inducers (one or two per dimer) are required to diminish operator affinity? The biphasic natures of the K84L and K84A inducer association rates allow direct correlation between the two distinct inducer binding events and operator release. Indeed, the kinetics of operator release for the K84A and K84L closely parallel those for the second inducer binding event. Together with implications from previous equilibrium results for wild-type and mutant proteins, these kinetic data demonstrate that binding of two inducers per dimeric DNA binding unit is required to release the operator in these variant LacI proteins.     

Role of the purine repressor hinge sequence in repressor function.

A protease-hypersensitive hinge sequence in Escherichia coli purine repressor (PurR) connects an N-terminal DNA-binding domain with a contiguous corepressor-binding domain. Binding of one molecule of dimeric repressor to operator DNA protects the hinge against proteolytic cleavage. Mutations in the hinge region impair repressor function in vivo. Several nonfunctional hinge mutants were defective in low-affinity binding to operator DNA in the absence of corepressor as well as in high-affinity corepressor-dependent binding to operator DNA, although binding of corepressor was similar to binding of the wild-type repressor. These results establish a role for the hinge region in operator binding and lead to a proposal for two routes to form the holoPurR-operator complex.     

Role of residue 147 in the gene regulatory function of the Escherichia coli purine repressor.

The crystal structures of corepressor-bound and free Escherichia coli purine repressor (PurR) have delineated the roles of several residues in corepressor binding and specificity and the intramolecular signal transduction (allosterism) of this LacI/GalR family member. From these structures, residue W147 was implicated as a key component of the allosteric response, but in many members of the LacI/GalR family, position 147 is occupied by an arginine. To understand the role of this tryptophan at position 147, three proteins, substituted by phenylalanine (W147F), alanine (W147A), or arginine (W147R), were constructed and characterized in vivo and in vitro, and their structures were determined. W147F displays a decreased affinity for corepressor and is a poor repressor in vivo. W147A and W147R, on the other hand, are super repressors and bind corepressor 13.6 and 7.9 times more tightly, respectively, than wild-type. Each mutant PurR-hypoxanthine-purF operator holo complex crystallizes isomorphously to wild-type. Whereas the apo corepressor binding domain (CBD) of W147F crystallizes under those conditions used for the wild-type protein, neither the apo CBD of W147R nor W147A crystallizes, although screened extensively for new crystal forms. Structures of the holo repressor mutants have been solved to resolutions between 2.5 and 2.9 A, and the structure of the apo CBD of W147F has been solved to 2.4 A resolution. These structures provide insight into the altered biochemical properties and physiological functions of these mutants, which appear to depend on the sometimes subtle preference for one conformation (apo vs holo) over the other.