Blockboard with boron-treated veneers: laboratory decay and termite resistance tests

This study is evaluated by measuring the weight loss, and the ability of white- and brown-rot fungi and termites to attack untreated and boron-treated blockboard manufactured using untreated fir (Abies bornmulleriana M.) strips sandwiched between Ekaba (Tetraberlinia bifoliolata Harms.) veneers at final assembly. The veneers were treated with either boric acid or disodium octoborate tetrahydrate, or mixtures of these chemicals, and blockboard specimens were subjected to fungal decay resistance tests performed according to the Japanese Industrial Standard (JIS) A-9201 method using the brown-rot fungus Fomitopsis palustris (Berkeley et Curtis) Murrill and the white-rot fungus, Trametes versicolor (L. ex Fr.) Quel. Blockboard specimens were also tested against the subterranean termite Coptotermes formosanus Shiraki to determine termite resistance. Blockboard specimens with boron-treated veneers demonstrated increased durability against decay fungi and termite attack. However, sealing of untreated fir strips before decay resistance tests helped reduce significantly the weight losses in blockboard with either untreated or boron-treated veneers. Although blockboard is usually used in indoor applications, incorporation of boron-based biocides may be required for increasing resistance to fungal decay and termite attack and giving fire retardancy.     

Performance of oak,beech and spruce beams after more than 100 years in service

The aim of this study was to investigate differences in the mechanical and fungicidal properties of three different wood species (English oak (Quercus sp.), common beech (Fagus sylvatica) and Norway spruce (Picea abies)) that had been in indoor use for several decades, compared to control specimens of freshly cut timber. The collected material was cut into smaller samples prior to further analysis. Extractive content, mechanical, fungicidal and sorption properties were determined according to standard procedures. The obtained results showed that the mechanical properties of oak wood do not deteriorate over the investigated time frame. On the other hand, the resistance of oak wood against fungi decreases over time. The reason for this is yet to be confirmed; it may be due to degradation of secondary metabolites. Similar results have been reported for spruce wood. There were no statistically significant differences in the mechanical properties of old and new spruce wood. In contrast to oak wood, there were also no significant differences in fungicidal properties, bearing in mind that spruce wood has lower durability than oak wood. Aging of beech wood resulted in a considerable decrease in the tested mechanical properties but showed no significant differences in fungicidal properties. Old beech wood specimens were moderately deteriorated by insects and fungi, which was the reason for the loss of bending and compressive strength. Our results confirm that most of the relevant properties do not deteriorate with time and that wood can be reused for a variety of other applications even after decades in service.     

Evaluation of mold,decay and termite resistance of pine wood treated with zinc- and copper-based nanocompounds

In this work, the resistance of black pine wood (Pinus nigra L.) vacuum-treated with zinc oxide, zinc borate and copper oxide nanoparticles against mold and decay fungi and the subterranean termites was evaluated. Some of the nanocompounds tested were forced with acrylic emulsions to avoid leaching. Results showed that mold fungi were slightly inhibited by nanozinc borate, while the other nanometal preparations did not inhibit mold fungi. Mass loss from fungal attack by Trametes versicolor was significantly inhibited by the zinc-based preparations, while the brown-rot fungus, Tyromyces palustris was not inhibited by the nanometal treatments. Notably, nanozinc borate plus acrylic emulsion imparted very high resistance in pine wood to the white-rot fungus, T. versicolor with a mass loss of 1.8%. Following leaching, all pine specimens treated with nanozinc borate, with or without acrylic emulsion, strongly inhibited termite feeding, i.e. mass losses varying at 5.2–5.4%. In contrast, the copper-based treatments were much less effective against the subterranean termites, Coptotermes formosanus. In general, nanozinc borate possessed favorable properties, that is, inhibition of termite feeding and decay by T. versicolor.     

Modification of wood with Si compounds to limit boron leaching from treated wood and to increase termite and decay resistance

In this study, we tested tetraethoxysilane and methyltriethoxysilane as modifying silicon-based compounds for their potential to limit boron leachability from modified wood and to increase biological durability of the wood against fungi and termites. Both the silane compounds were used in silane state where acidified ethanol was added and stirred at ambient temperature for 30 min. We used two different processes for preservative treatments: double treatment and single treatment. In double treatment, the specimens from sugi wood were first treated with boric acid at 1% concentration and subsequently treated with the silanes. In single treatment, boric acid was mixed with the silane compounds in the silane state yielding 1% boric acid concentration. Subsequent to the treatments, wood specimens were subjected to laboratory leaching tests, and leachates were analyzed for boron content with an inductively coupled plasma (ICP) spectrometry. ICP analyses showed that silane treatments were able to limit boron leaching from treated wood by about 40% in all cases for each silane compound. Wood specimens were then subjected to laboratory termite and decay resistance tests using the subterranean termites, Coptotermes formosanus, and the wood decaying fungi, Fomitopsis palustris and Trametes versicolor. Termite and fungal decay resistance tests revealed that resistance of modified wood with the silane and boron compounds increased when compared to untreated and boron-only treated wood specimens. More in-depth studies on the mechanisms of interactions between the silicon compounds, boron elements and wood components are in progress.     

Efficacy of tar oil recovered during slow pyrolysis of macadamia nut shells

Decay and termite resistance of wood treated with tar oil obtained from a commercial pyrolysis process of macadamia nut shells was evaluated. Vacuum-treated pinewood specimens were subjected to two brown- and two white-rot fungi based on the soil-block test method specified by the American Wood Protection Association after a 10-day-leaching process. Treated specimens were also subjected to the subterranean termite attack according to Japanese Industrial Standards (JIS) for 3 weeks under laboratory conditions. In the study, growth inhibition of selected fungi with the tar oil was also tested in vitro. Treated wood specimens at a retention level of 460 kg m⁻³ showed good protection against all the fungi tested. Mass losses in leached specimens were less than those observed in unleached specimens. Similar results were seen when the specimens were subjected to termite attack. Inhibition tests showed that higher concentrations of the tar oil are critical for inhibition of the brown-rot fungi compared to the concentrations required to impede the white-rot and sap-staining fungi tested.     

Evaluation of accelerated decay of wood plastic composites by Xylophagus fungi

The resistance to fungal attack of wood plastic composites (WPCs) containing 40% polypropylene and 60% either pine, maple or oak, wt%/wt%, was examined. WPCs specimens were made using the hot press system. Resistance to decay was evaluated using soil block and agar tests. Test specimens were exposed to either white-rot fungi, Trametes versicolor or Phanerochaete chrysosporium, or the brown-rot fungi Gloeophyllum trabeum or Postia placenta for six or 12 weeks. Moisture content and weight loss were used to assess the extent of decay of WPCs. Rates of decay in WPCs exposed in soil-block tests were greater than those exposed in the agar. WPCs containing either maple or oak were more susceptible to fungal attack then those containing pine.     

Do the unique properties of nanometals affect leachability or efficacy against fungi and termites?

Nanotechnology has the potential to affect the field of wood preservation through the creation of new and unique metal biocides with improved properties. This study evaluated leachability and efficacy of southern yellow pine wood treated with copper, zinc, or boron nanoparticles against mould fungi, decay fungi, and Eastern subterranean termites. Results showed that nanocopper with and without surfactant, nanozinc, and nanozinc plus silver with surfactant resisted leaching compared with metal oxide controls. Nearly all nanoboron and boric acid was released from the treated wood specimens during leaching. Mould fungi were moderately inhibited by nanozinc oxide with surfactant, but the other nanometal preparations did not significantly inhibit mould fungi. Mass loss from Gloeophyllum trabeum was significantly inhibited by all copper preparations, while Antrodia sp. was not inhibited by nanometal treatments. Nanometals imparted high resistance in southern yellow pine to the white-rot fungus, Trametes versicolor. Unleached specimens treated with nanoboron or nanozinc plus surfactant caused 100% and 31% mortality, respectively. All specimens treated with nanozinc or nanozinc plus silver inhibited termite feeding, but the copper treatments were less effective against termites. Nanozinc possessed the most favorable properties: leach resistance, termite mortality, and inhibition of termite feeding and decay by the white-rot fungus.     

Fungal decay resistance and durability of organosilicon-treated wood

The potential use of organosilicons as protective agents against basidiomycetes attack of wood used in outdoor applications was investigated using Scots pine sapwood and beech specimens. Both mini-blocks and EN 113 specimens were subjected to brown-rot and white-rot fungi. A dose–response could be observed showing that with higher weight percentage gain of the organosilicon, the resistance (i.e., efficacy) against fungi increased. At relatively low weight percentage gains, which are assumed to be economically feasible, Scots pine could be partly protected against decay by Postia placenta and Coniophora puteana and beech could be partly protected against decay by C. puteana and Trametes versicolor. Full protection was achieved by some silicons for Scots pine sapwood against C. puteana and for beech against T. versicolor. The most promising products were a solvent-based mixture of the alkoxysilanes methyltrimethoxysilane (MTM) and octyltriethoxysilane (OTES) and a water-based micro-emulsion of polydimethylsiloxane (PDMS) and triethoxysilane (TES) when applied above 20 and 30% weight gain for Scots pine and above 30 and 40% weight gain for beech. A water-based mixture of dimethylmethylhydrogen siloxane (DMS) and N-octyltriethoxysilane (n-OTES) was able to protect beech at weight gains above 30%.     

Resistance of European tree species to drought stress in mixed versus pure forests: evidence of stress release by inter‐specific facilitation

While previous studies focused on tree growth in pure stands, we reveal that tree resistance and resilience to drought stress can be modified distinctly through species mixing. Our study is based on tree ring measurement on cores from increment boring of 559 trees of Norway spruce (Picea abies [L.] Karst.), European beech (Fagus sylvatica [L.]) and sessile oak (Quercus petraea (Matt.) Liebl.) in South Germany, with half sampled in pure, respectively, mixed stands. Indices for resistance, recovery and resilience were applied for quantifying the tree growth reaction on the episodic drought stress in 1976 and 2003. The following general reaction patterns were found. (i) In pure stands, spruce has the lowest resistance, but the quickest recovery; oak and beech were more resistant, but recover was much slower and they are less resilient. (ii) In mixture, spruce and oak perform as in pure stands, but beech was significantly more resistant and resilient than in monoculture. (iii) Especially when mixed with oak, beech is facilitated. We hypothesise that the revealed water stress release of beech emerges in mixture because of the asynchronous stress reaction pattern of beech and oak and a facilitation of beech by hydraulic lift of water by oak. This facilitation of beech in mixture with oak means a contribution to the frequently reported overyield of beech in mixed versus pure stands. We discuss the far‐reaching implications that these differences in stress response under intra‐ and inter‐specific environments have for forest ecosystem dynamics and management under climate change.     

Musty odor of entomopathogens enhances disease-prevention behaviors in the termite Coptotermes formosanus

Termites often eliminate pathogens directly through mutual grooming, and are thereby prevent infections from entomopathogenic fungi. Our previous study confirmed that the antennae of Coptotermesformosanus sensitively responded to the musty odor of entomopathogenic fungi. However, it is unclear if this odor has any effect on termite behavior. The purpose of this study was to clarify the effects of fungal odor on termite behavior, especially on conidia removal. The musty odor was prepared as an aqueous solution by immersing conidia in distilled water. When untreated termites were mixed with fungal-odor-treated termites at a ratio of 4:1, mutual grooming and attack of treated termites were frequently observed. This indicated that the fungal odor triggered these behavioral responses. While some components of the fungal odor were found in all of the entomopathogenic fungi tested, the odor profiles differed among the isolates.     

Termite resistance of solid wood and plywood treated with quaternary ammonia compounds and common fire retardants

The ability of termites to attack solid wood and plywood treated with quaternary ammonia compounds and common fire retardants was evaluated. The plywood and solid-wood specimens treated with either monoammonium phosphate (MAP), diammonium phosphate (DAP), ammonium sulfate (AS), didecyl dimethyl ammonium chloride (DDAC), or didecyl dimethyl ammonium tetrafluoroborate (DBF) were subjected to termite resistance tests using the subterranean termites Coptotermes formosanus Shiraki under laboratory conditions. The lowest mass losses and the highest termite mortalities were obtained for the solid-wood and plywood specimens treated with DDAC and DBF. Higher termite mortalities were seen in the plywood specimens treated with the fire retardants when compared to the solid-wood specimens. The MAP, DAP, and AS treatments lowered the mass losses in both solid-wood and plywood specimens in comparison with control specimens; however, DBF and DDAC protected specimens well against termite attack at both concentration levels tested.     

Fungal communities associated with acorn woodpeckers and their excavations

Wood-decay fungi soften wood, putatively providing opportunities for woodpeckers to excavate an otherwise hard substrate, yet the fungal community composition in tree cavities and the specificity of these relationships is largely unknown. We used high-throughput amplicon sequencing of the fungal ITS2 region to examine the fungal communities associated with acorn woodpeckers (Melanerpes formicivorus) and their cavities in mature valley oak (Quercus lobata) and blue oak (Q. douglasii) trees in an oak savannah of central coastal California, USA. Acorn woodpeckers and their excavations harbored over 1500 fungal taxa, including more than 100 putative wood-decay fungi. The fungal communities found on the birds were more similar to those found in excavated cavities than those found in trees without excavated holes. These results suggest that symbiotic associations between acorn woodpeckers and fungi are highly diverse, with low specificity. Symbiotic associations between cavity-excavators and fungi are likely more common and widespread than previously thought.     

Evaluation of decay and termite resistance of wood treated with copper in combination with boron and N′-N-(1, 8-naphthalyl) hydroxylamine (NHA-Na)

This study evaluated the relative ability of various combinations of copper sulfate with either boric acid or calcium-precipitating agent, N′-N-(1, 8-naphthalyl) hydroxylamine (NHA-Na), to inhibit fungal degradation and attack by Formosan subterranean termites (Coptotermes formosanus Shiraki). Wood specimens were treated with either 1%, 0.5%, or 0.1% concentrations of copper sulfate, boric acid, NHA-Na, copper sulfate + boric acid, or copper sulfate + NHA-Na mixtures. Treated specimens were subjected to laboratory decay-resistance tests by using petri dishes inoculated with the Basidiomycetes fungi Tyromyces palustris and Trametes versicolor for 12 weeks. Treated wood specimens were also subjected to termite-resistance tests under laboratory conditions. Increased efficacy of copper sulfate against the brown-rot fungus T. palustris was observed when either boric acid or NHA-Na was added. The most effective treatments against the fungi tested were NHA-Na only treatments at 1% and 0.5% concentration levels. Boric acid treatments were not able to protect wood against decay after leaching because of excessive leaching of boron. Similar results were obtained in termite-resistance tests in comparison with decay-resistance tests. These results indicate that the efficacy of the treatments in preventing fungal and termite attack is a function of the type of preservative.     

Decay resistance of ash,beech and maple wood modified with N-methylol melamine and a metal complex dye

This study evaluated the decay resistance of ash (Fraxinus excelsior L.), beech (Fagus sylvatica L.), and maple (Acer platanoides L.) wood impregnated by a full cell process with N-methylol melamine (NMM) and combined NMM-metal complex dye (NMM-BS) in aqueous solutions. Basidiomycete decay testing involved incubation with Coniophora puteana (brown rot) and Trametes versicolor (white rot) according to a modified EN 113 (1996) standard, while for the soft rot fungal resistance was evaluated following the standard ENv 807 (2001). NMM and NMM-BS modifications at a WPG range of 7–11% provided decay protection against brown rot resulting in a mass loss less than the required limit (3%). The NMM and NMM-BS modified wood showed increased resistance to white rot decay; however, a higher WPG is needed to prohibit attack from this hardwood specific fungus. The metal-complex dye alone revealed biocidal effects against basidiomycetes. An increased WPG in NMM or NMM-BS had a positive impact against soft rot decay and the lowest mass losses after 32 weeks of exposure were obtained with NMM modification at about 18–21% WPG. NMM modification at this WPG range, however, was not sufficient to protect the wood from soft rot decay. The wood of beech and maple showed slightly higher resistance to all decay types than ash, probably due to the poorer degree of modification of the latter.     

An FT-IR study of the changes in chemical composition of bamboo degraded by brown-rot fungi

The objective of this study was to use FT-IR analysis to investigate the chemical composition of aged and un-aged bamboo specimens, with and without node sections, decayed by brown-rot fungi. Specimens were exposed to two brown-rot fungi, Coniophora puteana and Poria placenta, for 8 weeks after which decay was assessed by weight loss and FT-IR spectra analysis. Depending on the bamboo section examined, the aging process reduced decay resistance of specimens. Weight loss (measured as a percentage) decreased from the top to the bottom portion of bamboo culms. The presence of nodes in the specimens increased weight loss caused by P. placenta attack, and caused only a slight increase in weight loss from C. puteana attack. Significant chemical changes in bamboo were observed after fungal degradation, as revealed by FT-IR analyses. Consistent with the degradation mechanism of brown-rot fungi, lignin was essentially un-degraded or modified. Both brown-rot fungi caused a sharp decrease in the carbonyl absorption area. Surprisingly, cellulose peaks of degraded specimens were nearly similar to the peaks of control specimens. Aging treatments and biodegradation affected the crystalline structure of bamboo specimens. Poria placenta degraded wood components faster and changed the crystallinity more than C. puteana did, in accordance with the weight losses due to decay.     

Biodeterioration of brazilwood Caesalpinia echinata Lam. (Leguminosae—Caesalpinioideae) by rot fungi and termites

The heartwood of Caesalpinia echinata Lam. (Leguminosae) (commonly called brazilwood) is used for violin bow manufacture due to the unique vibrational and physical properties found in the wood. In the present work, the effects of Pycnoporus sanguineus (white-rot fungus), Gloeophyllum trabeum (brown-rot fungus), Chaetomium globosum (soft-rot fungus), and Cryptotermes brevis (dry-wood termite) on weight losses and chemical composition of extractives and cell-wall polysaccharides of C. echinata wood were investigated under laboratory conditions and compared to those obtained for Anadenanthera macrocarpa, Eucalyptus grandis, and Pinus elliottii. The heartwood of C. echinata was found to be as resistant as A. macrocarpa to the decay fungi tested and to the attack of the dry-wood termite. Pinitol and galactopinitol A were the main sugar alcohols found in the extractives of wood of C. echinata, their presence, however, did not appear related to the resistance to fungal decay. Although only incipient stages of decay were found, the modifications in cell-wall polysaccharide composition of heartwood of C. echinata by rot fungi were related to decrease in polymers other than xylans. The high resistance of C. echinata to xylophages is probably due to the presence of toxic extractives in the wood.     

Resistance in oak (Quercus spp.) to defoliation by Tortrix viridana L. in Roudsea Wood National Nature Reserve

Resistance in oak ( Quercus spp.) to defoliation by caterpillars of Tortrix viridana L. was studied in an oak wood and a mixed wood in Roudsea Wood National Nature Reserve. When defoliation is severe in the oak wood a few trees there and most of the oaks in the mixed wood retain relatively undamaged canopies. Their resistance was found to be phenological. The resistant trees in the oak wood flush either later or earlier than those that become defoliated; those in the mixed wood flush later. On late-flushing trees the buds open too late for newly hatched larvae to penetrate them, the resultant mortality reducing the larval population below the level at which damage is severe. The early-flushing trees carry as many larvae per leaf cluster as non-resistant trees but do not show severe defoliation because they produce more foliage and 'grow away' from the attack.     

Decay and termite resistance,water absorption and swelling of thermally compressed wood panels

This study evaluated decay and termite resistance of thermally compressed pine wood panels under pressure at either 5 or 7 MPa and either 120 or 150 °C for 1 h. Wood specimens from the panels were exposed to laboratory decay resistance tests by using the wood degrading fungi, Gloeophyllum trabeum and Trametes versicolor. The thermal compression process caused increases in density and decreases in thickness of the panels; however, laboratory decay resistance tests revealed that thermally compressed wood was not resistant against the wood degrading fungi tested. More interesting results were found in laboratory termite resistance tests by using the Eastern subterranean termites, Reticulitermes flavipes. As pressure and temperature applied to the specimens increased to 7 MPa and 120 °C, mass losses in the specimens gradually decreased in comparison with control specimens. However, the specimens compressed at 7 MPa and 150 °C showed higher mass losses when compared to the specimens compressed at 7 MPa and 120 °C. The lowest water absorption and swelling rates were seen in the specimens exposed to a pressure of 7 MPa at 120 °C. The thermal compression process at 7 MPa and 150 °C resulted in the highest water absorption and swelling in the specimens.     

Durability of phenolic-resin-treated oil palm wood against subterranean termites a white-rot fungus

Oil palm wood (OPW) is seen as a strategic alternative wood material, especially in a country with huge oil-palm-planted areas such as Malaysia. The material is low in quality and various techniques have been used to improve its quality. This study was carried out to evaluate the resistance of low-molecular-weight phenol formaldehyde (Lmw-PF) resin treated OPW against subterranean termites and a white-rot fungus. Four sample groups including untreated OPW and treated OPW samples with three different compression levels (0%, 25%, and 50%) were prepared. Five specimens for each sample group were tested for resistance against subterranean termites (Coptotermes curvignathus) and the white-rot fungus Pycnoporous sanguineus, based on ASTM D 3345-74 and ASTM D 1413-99, respectively. Results showed that both treatment and compression level had significant effects on the percentage weight loss and mean decayed surface of the samples. Treated OPW with 50% compression yielded the best performance with the lowest weight loss on both termite and decay tests. Overall, Lmw-PF resin treated OPW with 25–50% compression can be used as an effective method to improve the durability of OPW.     

Resistance of bioincised wood treated with wood preservatives to blue-stain and wood-decay fungi

Bioincising is a biotechnological process that aims at the improvement of wood preservative uptake in wood species with a low permeability, such as Norway spruce (Picea abies (L.) Karst). The process is based on a short-term pre-treatment with white-rot fungus Physisporinus vitreus. During incubation the membranes of bordered and half bordered pits are supposed to be degraded by fungal activity resulting in a better treatability of the wood structure for wood preservatives. In the present study, first of all the resistance of bioincised Norway spruce heartwood and untreated controls against blue-stain and wood-decay fungi (white- and brown-rot) was determined. Then, bioincised and untreated specimens were dipped or vacuum impregnated with six wood preservatives and substance uptake was assessed gravimetrically. Additionally, the penetration of 3-iodo-2-propynyl butylcarbamate (IPBC) into the wood was analyzed by high-pressure liquid chromatography (HPLC). Finally, wood resistance was assessed according to the European standards EN 152 and EN 113. Results showed no difference between bioincised wood without preservatives and the untreated wood against blue-stain discolouration. However, a significant (P < 0.05) increase in susceptibility against wood decay was recorded. In the bioincised wood samples a significantly higher uptake of all the different preservatives was determined and the HPLC-method revealed that IPBC penetrated deeper into bioincised wood than into control samples. The improved uptake of preservatives into bioincised wood resulted in a significantly higher resistance against white- and brown-rot fungi. However, only a slight protection against wood discolouration by blue-stain fungi was recorded. The results of this study show for the first time that the biotechnological process with P. vitreus can be used to improve wood durability by increasing the uptake and penetration of wood preservatives.