Kinetics and mechanisms of reduction of Cu(II) and Fe(III) complexes by soybean leghemoglobin alpha

The reduction of low-molecular-weight Cu(II) and Fe(III) complexes by soybean leghemoglobin alpha was characterized using both kinetic analysis and 1H-NMR experiments. Whereas Fe(III) (CN)6(3-) was reduced through an outer sphere transfer over the exposed heme edge, all other Cu(II) and Fe(III) complexes investigated were reduced via a site-specific binding of the metal to the protein. Reduction of all metal complexes was enhanced by decreasing pH while only Fe(III)NTA reduction kinetics were altered by changes in ionic strength. Rates of reduction for both Cu(II) and Fe(III) were also affected inversely by the effective binding constant of the metal chelate used. NMR data confirmed that both Cu(II)NTA and Fe(III)NTA were bound to specific sites on the protein. Cu(II) bound preferentially to distal His-61 and Fe(III) exerted its greatest effect on two surface lysine residues with epsilon proton resonances at 3.04 and 3.12 ppm. The Fe(III)NTA complex also had a mild but noticeable line broadening effect on the distal His-61 singlet resonance near 5.3 ppm. Like hemoglobin and myoglobin, leghemoglobin might function not only as an oxygen carrier, but also as a biological reductant for low-molecular-weight Cu(II) and Fe(III) complexes.     

Negative cooperativity of chicken ovotransferrin on Al(III)-binding

Chicken ovotransferrin, an iron binding protein, has two metal binding sites (amino (N) and carboxy (C) terminal sites). It binds Cu(II), Al(III), Co(II), and other metals, as well as Fe(III). In this study, the selectivity and cooperativity of the N and C sites on Al(III), Co(II), and Tb(III) binding were investigated. Metals were classified into two groups according to their site preference. Co(II) and Al(III) bound to the N site more preferably than to the C site, whereas Tb(III) bound to the C site more preferably. On Fe(III) binding, the binding constant of Fe(III) becomes larger when the other site is already occupied. Thus, positive cooperativity is seen. In the present study, the binding cooperativities of Co(II), Tb(III), and Al(III) as to the N and C sites were investigated. On Co(II) and Tb(III) binding, no cooperativity was observed, as in the case of Cu(II) [Yamamura, T. et al. (1985) in Proteins of Iron Storage and Transport (Spik, G., Montreuil, J., Crichton, R.R., & Mazurier, J., eds.) pp. 53-56, Elsevier Science Publ. B.V., Amsterdam]. In contrast, negative cooperativity was observed on Al(III) binding. Based on a model proposed by Yamamura et al. [Yamamura, T. et al. (1985) ibid.], the ratio of the binding constants, KC/KN, and the stacking coefficient, Kst, were estimated. KC/KN is 2.2 +/- 0.4 for the Tb(III) ion, 0.5 +/- 0.1 for the Co(II) ion, and 0.12 +/- 0.02 for the Al(III) ion. Kst (= 1 in a non-cooperative case) is 0.98 +/- 0.02 for the Tb(III) ion, 1.03 +/- 0.02 for the Co(II) ion, and 0.55 +/- 0.22 for the Al(III) ion.     

Nonequivalence of the metal binding sites of conalbumin. Calorimetric and spectrophotometric studies of aluminum binding.

Differential scanning calorimetric experiments show that addition of Al(III) to conalbumin increases its denaturation temperature by 5 degrees, from 60 to 68 degrees. Only one Al(III) bound per conalbumin molecule produces this change in heat stability; additional bound Al(III) does not affect the heat stability. Since Al(III) displaces both Cu(II) bound at the metal binding sites of conalbumin, binding of aluminum takes place at the same metal binding sites. The binding constant for the second Al(III) is at least 100-fold less than that for the binding of the first Al(III), and both are displaced by added iron. The order of increasing heat stability of the metal ion complexes of conalbumin, Cu(II), Al(III), Fe(III), is the order of increasing binding constant for these metal ions.     

Kinetics and mechanisms of the oxidation of myoglobin by Fe(III) and Cu(II) complexes

Two distinct mechanisms by which sperm whale myoglobin reduces, respectively, complexes of Fe(III) and Cu(II) and, in turn, is oxidized to metmyoglobin have been characterized. For both mechanisms, deoxymyoglobin is the active reductant. An outer sphere electron transfer, probably at the edge of the heme, is involved for Fe(III)NTA (NTA is nitrilotriacetic acid). This pathway does not involve ionic binding of the Fe(III) complex to the protein. The most reactive species of Fe(III)NTA is uncharged. No inhibition is observed with Ni(II) or Zn(II). An outer sphere site specific electron transfer is operative for reduction of Cu(II) complexes. The site has been characterized using NMR spectroscopy and involves one or more histidines. There is an initial binding of the Cu(II) chelate. The ternary complex of chelator-Cu(II)-deoxymyoglobin is a mandatory intermediate. Ni(II) and Zn(II) compete with Cu(II) for the binding site. A scheme for the participation of either or both of these mechanisms in reduction reactions of heme proteins is proposed. Both the overall redox potential, delta E0, and the stability constant for the ternary complex, K, govern the pathway and the reaction rate.     

Cu(III)-Polypeptide complexes exhibiting SOD-like activity

Summary The SOD-like activity of Cu(III) -complexes with polypeptides poly-L-lysine and poly-L-glutamic acid respectively was investigated. The Cu(II)-polypeptide complexes were first oxidized by K₂IrCl₆ to give the corresponding Cu(III) -compounds.The oxidation of Cu(II) and the corresponding Cu(II)/Cu(III) potential was evaluated by cyclic voltammetry (c.v.), UV-Vis and EPR spectroscopic (r.t.) experiments. Spin trapping EPR spectra were also conducted to confirm the formation of the superoxide radical. The SOD-like activity of each Cu(III)-complex was proved using the nitro blue tetrazolium (NBT) method slightly modified.     

Absence of humic substance reduction by the acidophilic Fe(III)-reducing strain Acidiphilium SJH: implications for its Fe(III) reduction mechanism and for the stimulation of natural organohalogen formation

A vast amount of volatile organohalogens (VOX) has natural origins. Both soils and sediments have been shown to release VOX, which are most likely produced via redox reactions between Fe(III) and quinones in the presence of halide anions, particularly at acidic pH. We tested whether acidophilic Fe(III)-reducers might indirectly stimulate natural VOX formation at acidic pH by providing reactive Fe and quinone species. However, it is unknown whether acidophilic Fe(III)-reducers can reduce humic acids (HA) or fulvic acids (FA). We therefore tested the ability of the acidophilic Fe(III)-reducer Acidiphilium SJH to reduce macromolecular, suspended HA and dissolved FA at pH 3.1–3.3. We found that (i) SJH can neither reduce HA/FA nor the humic model quinone anthraquinone-2,6-disulfonic-acid (AQDS) nor stimulate the formation of FA radicals, (ii) at acidic pH, significantly more electrons are transferred abiotically both from native and reduced FA to dissolved Fe(III) than from native or reduced HA, and (iii) the presence of strain SJH does not stimulate VOX formation. Our results imply that the acidophilic Fe(III)-reducer SJH either uses an enzyme for Fe(III) reduction that can neither be used for HA/FA nor for AQDS reduction or that the location of Fe(III) reduction is inaccessible for these compounds. We further conclude that microorganisms such as strain SJH probably do not indirectly stimulate natural VOX formation at acidic pH via the formation of reactive quinone species.     

Spectroscopic study on the interaction of bovine serum albumin with zinc(II) phthalocyanine

The interaction between the photosensitive antitumour drug, 2(3),9(10),16(17),23(24)‐tetra‐(((2‐aminoethylamino)methyl)phenoxy)phthalocyaninato‐zinc(II) (ZnPc) and bovine serum albumin (BSA) has been investigated using various spectroscopic methods. This work may provide some useful information for understanding the interaction mechanism of anticancer drug–albumin binding and gain insight into the biological activity and metabolism of the drug in blood. Based on analysis of the fluorescence spectra, ZnPc could quench the intrinsic fluorescence of BSA and the quenching mechanism was static by forming a ground state complex. Meanwhile, the Stern–Volmer quenching constant (K_SV), binding constant (K_b), number of binding sites (n) and thermodynamic parameters were obtained. Results showed that the interaction of ZnPc with BSA occurred spontaneously via hydrogen bond and van der Waal's force. According to Foster's non‐radioactive energy transfer theory, the energy transfer from BSA to ZnPc occurred with high possibility. Synchronous fluorescence and circular dichroism (CD) spectra also demonstrated that ZnPc induced the secondary structure of and conformation changes in BSA, especially α helix. Copyright © 2015 John Wiley & Sons, Ltd.     

Ion‐Exchange and Adsorption of Fe(III) by Sepia Melanin

Sepia eumelanin is associated with many metal ions, yet little is known about its metal binding capacity and the chemical nature of the binding site(s). Herein, the natural concentrations of metal ions are presented and the ability to remove metals by exposure of the melanin granules to EDTA is quantified. The results reveal that the binding constants of melanin at pH 5.8 for Mg(II), Ca(II), Sr(II) and Cu(II) are, respectively, 5, 4, 14 and 34 times greater than the corresponding binding constants of these ions with EDTA. By exposing Sepia eumelanin to aqueous solutions of FeCl₃, the content of bound Fe(III) can be increased from a natural concentration of ～180 ppm to a saturation limit of ～80 000 ppm or 1.43 mmol/g of melanin. Similar saturation limits are found for Mg(II) and Ca(II). Exposure of Sepia melanin granules to aqueous solutions containing Ca(II) results in the stoichiometric replacement of the initially bound Mg(II), arguing that these two ions occupy the same binding site(s) in the pigment. The pH‐dependent binding of Mg(II) and Ca(II) suggests coordination of these ions to carboxylic acid groups in the pigment. Mg(II) and Ca(II) can be added to a Fe(III)‐saturated melanin sample without affecting the amount of Fe(III) pre‐adsorbed, clearly establishing Fe(III) and Mg(II)/Ca(II) occupy different binding sites. Taking recent Raman spectroscopic data into account, the binding of Fe(III) is concluded to involve coordination to o‐dihydroxyl groups. The effects of metal ion content on the surface morphology were analyzed. No significant changes were found over the full range of Fe(III) concentration studied, which is supported by the Brunauer–Emmett–Teller surface area analysis. These observations imply the existence of channels within the melanin granules that can serve to transport metal ions.     

Fe(III) and Cu(II) conalbumin visible circular dichroism spectra.

The single polypeptide chain of conalbumin strongly binds two Fe(III) or two Cu(II) ions to yield intense absorption in the visible region similar to that shown by the related protein transferrin. Comparison of the metal-ion-binding sites in the two proteins is made by exploiting the sensitivity to ligand geometry of circular dichroism (CD). For the Fe(III) proteins strong similarities of the CD spectra outweigh marginal differences. For Cu(II) conalbumin an additional negative extremum near 506 nm appears between two positive ones at 634 and 410 nm suggesting greater subtraction of oppositely signed CD components leading to lesser magnitudes for the two positive peaks than are found in Cu(II)-transferrin. The two Fe(III)-binding sites within conalbumin are compared by noting the strong similarities of the CD and MCD of proteins with Fe(III) in one site and Ga(III) in the other site, and vice versa, with the protein containing Fe(III) in both sites. Due to features of the amino acid sequences of the single protein chains, the four strong metal ion binding sites in conalbumin and transferrin cannot be identical in all particulars, yet CD spectra of their metal ion complexes are closely similar. From a study of model phenolate complexes and the wavelength maxima of visible absorption in the Fe(III), Cu(II), and Co(III) proteins near 465, 440, and 405 nm, respectively, these strong absorption bands are identified as ligand to metal ion electron-transfer transitions. It is suggested that tyrosyl residues are the donors in the electron transfer transitions and that they lock in the metal ions after being keyed into position by binding of bicarbonate or other anions.     

Binding of Cu (II), Tb (III) and Fe (III) to chicken ovotransferrin

The kinetics of binding of Cu (II), Tb (III) and Fe(III) to ovotransferrin have been investigated using the stopped-flow technique. Rate constants for the second-order reaction, k ₊, were determined by monitoring the absorbance change upon formation of the metal-transferrin complex in time range of milliseconds to seconds. The N and C sites appeared to bind a particular metal ion with the same rate; thus, average formation rate constants k ₊ (average) were 2.4 × 10⁴ M^–1 s^–1 and 8.3 × 10⁴ M^–1 S ^–1 for Cu (II) and Tb (III) respectively. Site preference (N site for Cu (II) and C site for Tb (III)) is then mainly due to the difference in dissociation rate constant for the metals. Fe (III) binding from Fe-nitrilotriacetate complex to apo-ovotransferrin was found to be more rapid, giving an average formation rate constant k ₊ (average) of 5 × 10⁵ M^–1 s^–1, which was followed by a slow increase in absorbance at 465 nm. This slow process has an apparent rate constant in the range 3 s^–1 to 0.5 s^–1, depending upon the degree of Fe (III) saturation. The variation in the rate of the second phase is thought to reflect the difference in the rate of a conformational change for monoferric and diferric ovotransferrins. Monoferric ovotransferrin changes its conformation more rapidly (3.4s^–1) than diferric ovotransferrin (0.52 s^–1). A further absorbance decrease was observed over a period of several minutes; this could be assigned to release of NTA from the complex, as suggested by Honda et al. (1980).Abbreviations Tf ovotransferrin - NTA nitrilotriacetate Jichi Medical School, School of Nursing, Yakushiji 3311-159, Minamikawachi, Tochigi, 329-04 Japan     

Spectroscopic,structural and antibacterial properties of copper(II) complexes with bio-relevant 5-methyl-3-formylpyrazole N(4)-benzyl-N(4)-methylthiosemicarbazone

The coordination behaviour of the title ligand, 5-methyl-3-formylpyrazole N(4)-benzyl-N(4)-methylthiosemicarbazone(HMPz4BM), is reported with solid state isolation of copper(II) complexes, [Cu(HMPz4BM)X₂] (X = Cl, Br, NO₃, ClO₄ and BF₄) which have been spectroscopically and structurally characterised. I.r. data for the free ligand and its Cu(II) complexes indicate that HMPz4BM exhibits a neutral NNS tridentate function via the pyrazolyl nitrogen(tertiary), azomethine nitrogen and thione sulphur. Electronic spectral data are suggestive of a square pyramidal environment for the seemingly pentacoordinated Cu(II) species. E.s.r parameters (RT and LNT) of the reported copper(II) complexes are indicative of a dx_x2–y2 ground state for the reported species. Cyclic voltammograms of Cu(II) complexes show a quasireversible Cu^II/Cu^III couple and also an irreversible Cu^II/Cu^I couple. X-ray crystallography of a representative species, [Cu(HMPz4BM)(NO₃)₂] (C2/c, monoclinic ), has unambiguously documented the conjectural findings from i.r. data that coordinating sites of the title ligand are pyrazolyl (tertiary)nitrogen, azomethine nitrogen and the thione sulphur (NNS); and the oxygen of one of the nitrate ions has occupied the basal plane; the fifth coordination position has been occupied by the oxygen of another nitrate ion in a square pyramidal geometry. The antibacterial properties of the ligand and its copper(II) complexes studied on microorganism, Staphylococcus aureus have pointed out that most of the complexes have higher activities than that of the free ligand.     

Reduction of Fe(III) (Hydr)oxides with Known Thermodynamic Stability by Geobacter metallireducens

Sulfate-reducing and methanogenic microorganisms become inactive when the concentration of the electron donors drops below a threshold set by the minimum Gibbs free energy required for the bacterial metabolism to be maintained. Thus, their activity is thermodynamically controlled. In this paper we study if the activity of dissimilatory Fe(III) reducing bacteria is also limited by the thermodynamics of the reaction. We synthesized five Fe (III) (hydr)oxides (FHOs) of moderate stability and determined the solubility product (log K _SO (?39.1)-(?41.8)), in order to calculate their standard free energy of formation. K _SO values, estimated from the particle size did not correspond with experimentally determined ones. HCO₃ ^? and PIPES-buffered media, containing 45 mM FHO and either 1, 10, or 100 mM acetate were inoculated with Geobacter metallireducens. At the end of bacterial reduction, the Gibbs free energy of the reaction showed significant differences between the different FHOs. The termination of the bacterial activity was consequently not triggered thermodynamically. However, the non-dissolved Fe(II) (HCl-soluble minus soluble Fe(II)) showed an excellent correlation with the surface of the FHOs (15 μmol m^?2). It is therefore likely that the termination of the reaction was caused by blocking of the FHO surface with insoluble Fe(II), as has been previously reported in the literature. The ecological significance of both thermodynamic limitation and surface availability limitation is discussed for FHOs of different K _SO in environments with approximately neutral pH.     

Interaction studies of copper complex containing food additive carmoisine dye with human serum albumin (HSA): Spectroscopic investigations

In this study, the interaction between human serum albumin (HSA) and a copper complex of carmoisine dye; [Cu(carmoisine)₂(H₂O)₂], was studied in vitro using multi‐spectroscopic methods. It was found that the intrinsic fluorescence of HSA was quenched by the addition of the [Cu(carmoisine)₂(H₂O)₂] complex and the quenching mechanism was considered as static quenching by formation of a [Cu(carmoisine)₂(H₂O)₂]–HSA complex. The binding constant was about 10⁴ M^?1 at room temperature. The values of the calculated thermodynamic parameters (ΔH < 0 and ΔS > 0) suggested that both hydrogen bonds and the hydrophobic interactions were involved in the binding process. The site marker competitive experiments revealed that the binding of [Cu(carmoisine)₂(H₂O)₂] to HSA primarily occurred in subdomain IIIA (site II) of HSA. The results of circular dichroism (CD) and UV–vis spectroscopy showed that the micro‐environment of amino acid residues and the conformation of HSA were changed after addition of the [Cu(carmoisine)₂(H₂O)₂] complex. Finally, the binding of the [Cu(carmoisine)₂(H₂O)₂] complex to HSA was modelled by a molecular docking method. Excellent agreement was obtained between the experimental and theoretical results with respect to the binding forces and binding constant.     

Redox Properties of Iron in the Binding Site(s) of F1ATPase from Mammalian Mitochondria and Thermophilic Bacterium PS3: A Comparative Study

Iron ions in the two iron centers of beef heart mito-chondrial F, ATPase, which we have been recently characterized (FEBS Letters 1996,379, 231-235), exhibit different redox properties. In fact, the ATP-dependent site is able to maintain iron in the redox state of Fe(II) even in the absence of reducing agents, whereas in the nucleotide-independent site iron is oxidized to Fe(III) upon removal of the reductant. Fe(III) ions in the two sites display different reactivity towards H₂O₂, because only Fe(III) bound in the nucleotide-independent site rapidly reacts with H₂O₂ thus mediating a 30% enzyme inactivation. Thermophilic bacterium PS3 bears one Fe(III) binding site, which takes up Fe(III) either in the absence or presence of nucleotides and is unable to maintain iron in the redox state of Fe(II) in the absence of ascorbate. Fe(III) bound in thermophilic F₁ATPase in a molar ratio 1:1 rapidly reacts with H₂O₂ mediating a 30% enzyme inactivation. These results support the presence in mitochon-drial and thermophilic F₁ATPase of a conserved site involved in iron binding and in oxidative inactivation, in which iron exhibits similar redox properties. On the other hand, at variance with thermophilic F₁ATPase, the mitochondrial enzyme has the possibility of maintaining one equivalent of Fe(II) in its peculiar ATP-dependent site, besides one equivalent of Fe(III) in the conserved nucleotide-independent site. In this case mitochondrial F, ATPase undergoes a higher inactivation (75%) upon exposure to H₂O₂. Under all conditions the inactivation is significantly prevented by PBN and DMSO but not by Cu, Zn superoxide dis-mutase, thus suggesting the formation of OH radicals as mediators of the oxidative damage. No dityrosines, carbonyls or oxidized thiols are formed. In addition, in any cases no protein fragmentation or aggregation is observed upon the treatment with H₂O₂.     

Studies on human lactoferrin by electron paramagnetic resonance, fluorescence, and resonance Raman spectroscopy

Investigations of metal-substituted human lactoferrins by fluorescence, resonance Raman, and electron paramagnetic resonance (EPR) spectroscopy confirm the close similarity between lactoferrin and serum transferrin. As in the case of Fe(III)- and Cu(II)-transferrin, a significant quenching of apolactoferrin's intrinsic fluorescence is caused by the interaction of Fe(III), Cu(II), Cr(III), Mn(III), and Co(III) with specific metal binding sites. Laser excitation of these same metal-lactoferrins produces resonance Raman spectral features at ca. 1605, 1505, 1275, and 1175 cm-1. These bands are characteristic of tyrosinate coordination to the metal ions as has been observed previously for serum transferins and permit the principal absorption band (lambda max between 400 and 465 nm) in each of the metal-lactoferrins to be assigned to charge transfer between the metal ion and tyrosinate ligands. Furthermore, as in serum transferrin the two metal binding sites in lactoferrin can be distinguished by EPR spectroscopy, particularly with the Cr(III)-substituted protein. Only one of the two sites in lactoferrin allows displacement of Cr(III) by Fe(III). Lactoferrin is known to differ from serum transferrin in its enhanced affinity for iron. This is supported by kinetic studies which show that the rate of uptake of Fe(III) from Fe(III)--citrate is 10 times faster for apolactoferrin than for apotransferrin. Furthermore, the more pronounced conformational change which occurs upon metal binding to lactoferrin is corroborated by the production of additional EPR-detectable Cu(II) binding sites in Mn(III)-lactoferrin. The lower pH required for iron removal from lactoferrin causes some permanent change in the protein as judged by altered rates of Fe(III) uptake and altered EPR spectra in the presence of Cu(II). Thus, the common method of producing apolactoferrin by extensive dialysis against citric acid (pH 2) appears to have an adverse effect on the protein.     

Iron release from transferrin induced by mixed ligand complexes of copper(II)

Summary Copper(II) complexes CuL₁L₂ with the ligand pairs 3-phosphoglycerate (PG)/ethylenediamine (en), phosphoserine (PS)/ethylenediamine, phosphoserine/malonate (mal) are shown to be effective in inducing the release of both iron atoms from di-ferric transferrin (Fe2Tf; human serum transferrin) at pH 7.3 in 1 M NaCl at 25°C. Half-times of the reaction with Cu(PG)(en)^– were less than 1 min at 0.02 M concentration. The iron(III) products are polynuclear hydroxo complexes. There is weaker interaction with Cu(PS) ₂ ^4– and virtually none with Cu(serine)(en) nor Cu(PS)(2,2-bipyridyl)^–, revealing crucial effects of the combined ligand sphere including the phosphomonoester group. The results suggest that the release of iron from Fe2Tf, or from either monoferric transferrins, occurred due to the breakdown of the stability of iron binding in conjunction with the expulsion of the synergistic anion carbonate (or oxalate). The active copper(II) complexes are postulated to be models of membrane components that could liberate iron from transferrin succeeding its uptake at the receptor sites of cells.Abbreviations PG phosphoglycerate - PS phosphoserine - en ethylenediamine - Fe2Tf diferric transferrin - Fe_cTf and Fe_NTf transferrin with iron bound to the lobe containing the C- or N-terminus, respectively - apoTf apotransferrin - K-3 all-cis-1,3,5-tris(trimethylammonio)-2,4,6-cyclo-hexanetriol - NTA nitrilotriacetic acid; bipy, 2,2-bipyridine; mal, malonate     

The metallomics approach: use of Fe(II) and Cu(II) footprinting to examine metal binding sites on serum albumins

Metal binding to serum albumins is examined by oxidative protein-cleavage chemistry, and relative affinities of multiple metal ions to particular sites on these proteins were identified using a fast and reliable chemical footprinting approach. Fe(ii) and Cu(ii), for example, mediate protein cleavage at their respective binding sites on serum albumins, in the presence of hydrogen peroxide and ascorbate. This metal-mediated protein-cleavge reaction is used to evaluate the binding of metal ions, Na(+), Mg(2+), Ca(2+), Al(3+), Cr(3+), Mn(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), and Ce(3+) to albumins, and the relative affinities (selectivities) of the metal ions are rapidly evaluated by examining the extent of inhibition of protein cleavage. Four distinct systems Fe(II)/BSA, Cu(II)/BSA, Fe(II)/HSA and Cu(II)/HSA are examined using the above strategy. This metallomics approach is novel, even though the cleavage of serum albumins by Fe(II)/Cu(II) has been reported previously by this laboratory and many others. The protein cleavage products were analyzed by SDS PAGE, and the intensities of the product bands quantified to evaluate the extent of inhibition of the cleavage and thereby evaluate the relative binding affinities of specific metal ions to particular sites on albumins. The data show that Co(II) and Cr(III) showed the highest degree of inhibition, across the table, followed by Mn(II) and Ce(III). Alakali metal ions and alkaline earth metal ions showed very poor affinity for these metal sites on albumins. Thus, metal binding profiles for particular sites on proteins can be obtained quickly and accurately, using the metallomics approach.     

Characterisation of H+ and Cu2+ binding to humic and fulvic acids

Abstract

The nature of H⁺ and Cu²⁺ binding by soil-derived humic (HA) and fulvic (FA) acid was characterised using potentiometric titrations. The experimental data obtained showed that the derived proton balance equation was valid and capable of describing proton consumption by both polyelectrolytes. HA was found to be more acidic and more reactive as shown by its lower equivalent weight compared to FA. Acid consumption by HA during titrations was little affected at ionic strength (μ) up to 0.1 M although it was enhanced at higher μ. Displacement of protons by Cu²⁺ resulted in a nonlinear sigmoidal pattern suggesting the formation of different Cu-HA chelates, or existence of sites that differed in their affinities for Cu on the ligand. Different concentrations of added Cu appeared to favour one or both mechanisms, although the titration method could not differentiate which of the probable mechanisms was more dominant at a specific level of Cu added. Similar values were obtained for conditional stability constants using either the equation of Scatchard or Ruzic.     

Selective adsorption of apoferritin on immobilized Fe(III): demonstration of Fe(III) binding sites

Immobilized metal ion affinity chromatography has been used to demonstrate and partially characterize Fe(III) binding sites on apoferritin. Binding of Fe(III) to these sites is influenced by pH, but not affected by high ionic strength. These results suggest that both ionic and coordinate covalent interactions are important in the formation of the Fe(III): apoferritin complex. This is, to our knowledge, the first demonstration of direct Fe(III) binding to apoferritin. Other immobilized metal ions, including Zn(II), Ni(II), Cu(II), Cr(III), Co(II), and Tb(III), displayed little or no adsorption of apoferritin. The analytical technique of immobilized metal ion affinity chromatography also shows great promise in the purification of apoferritin, ferritin, and other iron-binding proteins.     

Comparison of measured and modelled copper binding by natural organic matter in freshwaters

Fifteen freshwater samples containing significant concentrations of dissolved organic carbon-[DOC]-were titrated with copper under standardised conditions (pH 6 and 7), and concentrations of Cu(2+)-[Cu(2+)]-were measured with an ion-selective electrode. Measured values of [Cu(2+)], which were in the range 10(-11)-10(-5) moll(-1), were compared with those simulated using Humic Ion-Binding Models V and VI. It was assumed that copper speciation was controlled by the organic matter, represented by fulvic acid (FA), together with inorganic solution complexation (calculated with an inorganic speciation model). The models were calibrated by adjusting a single quantity, the concentration of FA. The optimised value-[FA](opt)-was that giving the best agreement, according to least squares, between measured and simulated [Cu(2+)]. The calculations took into account competition by other dissolved (filterable) metals (Mg, Al, Ca, Fe(II), Fe(III), Zn); in the case of Fe(III) it was assumed either that all the dissolved metal was truly in solution, or that the activity of Fe(3+) was controlled by equilibrium with Fe(OH)(3). The assumption about Fe(III) had relatively small effects on the fitting of Model V, but was significant for Model VI, because Model VI represents low-abundance, high-affinity binding sites in humic matter, which are sensitive to Fe(III) competition. Because of its inclusion of the high-affinity sites, Model VI provided better fits of the data than did Model V. Furthermore, Model VI with Fe(3+) activity controlled by Fe(OH)(3) gave smaller variation in the ratio of [FA](opt) to [DOC] than Model VI with all Fe(III) assumed to be in solution. The average [FA](opt)/[DOC] found from the Cu titrations was 1.30, which implies that 65% of the organic matter is 'active' with respect to metal binding. The average ratio of 1.30 is in reasonable agreement with ratios obtained by applying the model to field data sets for charge balance (1.22), Al speciation (1.56) and base titrations of Cu-amended waters (1.45). It is concluded that Model VI/Fe(OH)(3) provides the most reliable predictions of dissolved metal speciation in natural waters; at a total Cu concentration of 1 microM, the predicted concentration of Cu(2+) is expected to be correct to within a factor of 3.6 in 95% of cases.