Hydrogel-based protein microchips: manufacturing,properties, and applications

Here a simple, reproducible, and versatile method is described for manufacturing protein and ligand chips. The photo-induced copolymerization of acrylamide-based gel monomers with different probes (oligonucleotides, DNA, proteins, and low-molecular ligands) modified by the introduction of methacrylic groups takes place in drops on a glass or silicone surface. All probes are uniformly and chemically fixed with a high yield within the whole volume of hydrogel semispherical chip elements that are chemically attached to the surface. Purified enzymes, antibodies, antigens, and other proteins, as well as complex protein mixtures such as cell lysates, were immobilized on a chip. Avidin- and oligohistidine-tagged proteins can be immobilized within biotin- and Ni-nitrilotriacetic acid-modified gel elements. Most gel-immobilized proteins maintain their biological properties for at least six months. Fluorescence and chemiluminescence microscopy were used as efficient methods for the quantitative analysis of the microchips. Direct on-chip matrix-assisted laser desorption ionization-time of flight mass spectrometry was used for the qualitative identification of interacting molecules and to analyze tryptic peptides after the digestion of proteins in individual gel elements. We also demonstrate other useful properties of protein microchips and their application to proteomics and diagnostics.     

Manual Manufacturing of Oligonucleotide, DNA, and Protein Microchips

A simple procedure for manufacturing microchips containing various gel-immobilized compounds is described. A gel photopolymerization technique is introduced to produce micromatrices of polyacrylamide gel pads (25 × 25 × 20 μm and larger) separated by a hydrophobic glass surface. A pin device for the manual application of a compound in solution onto the activated polyacrylamide gel pad for immobilization is described. Oligonucleotide, DNA, and protein microchips have been produced by this method and tested by hybridization and immunoanalysis monitored with a fluorescence microscope. The effect of the lengths of the immobilized oligonucleotides and the hybridized RNA and DNA on hybridization of the oligonucleotide microchips was evaluated. This method can also be used for manufacturing microchips containing a variety of other compounds.     

Kinetics of hybridization on surface oligonucleotide microchips: theory, experiment, and comparison with hybridization on gel-based microchips

The optimal design of oligonucleotide microchips and efficient discrimination between perfect and mismatch duplexes strongly depend on the external transport of target DNA to the cells with immobilized probes as well as on respective association and dissociation rates at the duplex formation. In this paper we present the relevant theory for hybridization of DNA fragments with oligonucleotide probes immobilized in the cells on flat substrate. With minor modifications, our theory also is applicable to reaction-diffusion hybridization kinetics for the probes immobilized on the surface of microbeads immersed in hybridization solution. The main theoretical predictions are verified with control experiments. Besides that, we compared the characteristics of the surface and gel-based oligonucleotide microchips. The comparison was performed for the chips printed with the same pin robot, for the signals measured with the same devices and processed by the same technique, and for the same hybridization conditions. The sets of probe oligonucleotides and the concentrations of probes in respective solutions used for immobilization on each platform were identical as well. We found that, despite the slower hybridization kinetics, the fluorescence signals and mutation discrimination efficiency appeared to be higher for the gel-based microchips with respect to their surface counterparts even for the relatively short hybridization time about 0.5-1 hour. Both the divergence between signals for perfects and the difference in mutation discrimination efficiency for the counterpart platforms rapidly grow with incubation time. In particular, for hybridization during 3 h the signals for gel-based microchips surpassed their surface counterparts in 5-20 times, while the ratios of signals for perfect-mismatch pairs for gel microchips exceeded the corresponding ratios for surface microchips in 2-4 times. These effects may be attributed to the better immobilization efficiency and to the higher thermodynamic association constants for duplex formation within gel pads.     

Gel-Based Microchips: History and Prospects

The review describes the history of formation and development of the microchip technology and its role in the human genome project in Russia. The main accent was done on the three-dimensional gel-based microchips developed at the Center of Biological Microchips headed by A.D. Mirzabekov since 1988. The gel-based chips of the last generation, IMAGE chips (Immobilized Micro Array of Gel Elements), have a number of advantages over the previous models. The microchips are manufactured by photoinitiated copolymerization of gel components and immobilized molecules (DNA, proteins, and ligands). This ensures an even distribution of the immobilized probe throughout the microchip gel element with a high yield (about 50% for oligonucleotides). The use of methacrylamide as a main component of the polymerization mixture resulted in a substantial increase of gel porosity without affecting its mechanical properties and stability; this allowed one to work with the DNA fragments of up to 500 nt in length, as well as with quite large protein molecules. At present, the gel-based microchips are widely applied to solve different problems. The generic microchips containing a complete set of possible hexanucleotides are used to reveal the DNA motifs binding with different proteins and to study the DNA–protein interactions. The oligonucleotide microchips are a cheap and reliable diagnostic tool designed for mass application. Biochips have been developed for identification of the tuberculosis pathogen and its antibiotic-resistant forms; of orthopoxviruses, including the smallpox virus; of the anthrax pathogen; and chromosomal rearrangements in leukemia patients. The protein microchips can be adapted for further use in proteo-mics. Bacterial and yeast cells were also immobilized in the gel, maintaining their viability, which opens a wide potential for creating biosensors on the basis of microchips.     

Microchips based on three dimensional gel cells: history and perspective

The review describes the history of creation and development of the microchip technology and its role in the human genome project in Russia. The emphasis is placed on the three-dimensional gel-based microchips developed at the Center of Biological Microchips headed by A.D. Mirzabekov since 1988. The gel-based chips of the last generation, IMAGE chips (Immobilized Micro Array of Gel Elements), have a number of advantages over the previous versions. The microchips are manufactured by photo-initiated copolymerization of gel components and immobilized molecules (DNA, proteins, and ligands). This ensures an even distribution of the immobilized probe throughout the microchip gel element with a high yield (about 50% for oligonucleotides). The use of methacrylamide as a main component of the polymerization mixture resulted in a substantial increase of gel porosity without affecting its mechanical strength and stability, which allowed one to work with the DNA fragments of up to 500 nt in length, as well as with rather large protein molecules. At present, the gel-based microchips are widely applied to address different problems. The generic microchips containing a complete set of possible hexanucleotides are used to reveal the DNA motifs binding with different proteins and to study the DNA-protein interactions. The oligonucleotide microchips are a cheap and reliable tool of diagnostics designed for mass application. Biochips have been developed for identification of the tuberculosis pathogen and its antibiotic-resistant forms; for diagnostics of orthopoxviruses, including the smallpox virus; for diagnostics of the anthrax pathogen; and for identification of chromosomal rearrangements in leukemia patients. The protein microchips can be adapted for further use in proteomics. Bacterial and yeast cells were also immobilized in the gel, maintaining their viability, which open a wide potential for creation biosensors on the basis of microchips.     

Hydrogel glycan microarrays

The technology of hydrogel microchips manufacturing, which was developed previously for covalent immobilization of DNA and proteins, was applied for the preparation of glycochips and combined glyco/protein chips. Microchips consist of hydrogel drops separated with hydrophobic surface. Spacered amino-saccharides and polyacrylamide glycoconjugates were used for immobilization. Gel elements were approximately 1 nl in volume (150 microm in diameter and 25 microm in height), and the amount of covalently immobilized saccharide in the glycoarray was 0.4-1.7 pmol per gel element. Hydrogel glycan microchips were used for quantitative assay of antibodies against blood group antigens and assay of lectins with fluorescent detection. In all cases, only specific interaction with chip-immobilized saccharides was observed, whereas the background signal was very low. The detection limit of on-chip assays was comparable to that of the standard 96-well plate assays. Mixing of reaction solution allowed us to decrease the duration of the assays significantly: 2-3 h for incubation and development steps and 10 min for washing. A method for determination of association constants for binding of compounds with chip-immobilized ligands from the kinetics of their binding is proposed. Combined microchips containing different types of biomolecules can be designed and used for simultaneous detection of different compounds.     

2D format for screening bacterial cells at the throughput of flow cytometry

We present a method for generating gel-based unordered 2D arrays of bacterial cells of a very high density, up to 10(5) cells per mm(2). Bacteria in a suspension are focused into a thin layer when the suspension and a dry gel matrix penetrate each other. Formation of a second gel from gel-forming components contained in the suspension results in immobilization of the cells. The immobilized cells stay alive and can repeatedly divide to produce microcolonies. The method provides for high-throughput screening and massively parallel analysis of individual cells in large populations, as well as for rapid isolation of rare clones.     

Nonvolatile copolymer compositions for fabricating gel element microarrays

By modifying polymer compositions and cross-linking reagents, we have developed a simple yet effective manufacturing strategy for copolymerized three-dimensional gel element arrays. A new gel-forming monomer, 2-(hydroxyethyl) methacrylamide (HEMAA), was used. HEMAA possesses low volatility and improves the stability of copolymerized gel element arrays to on-chip thermal cycling procedures relative to previously used monomers. Probe immobilization efficiency within the new polymer was 55%, equivalent to that obtained with acrylamide (AA) and methacrylamide (MA) monomers. Nonspecific binding of single-stranded targets was equivalent for all monomers. Increasing cross-linker chain length improved hybridization kinetics and end-point signal intensities relative to N,N-methylenebisacrylamide (Bis). The new copolymer formulation was successfully applied to a model orthopox array. Because HEMAA greatly simplifies gel element array manufacture, we expect it (in combination with new cross-linkers described here) to find widespread application in microarray science.     

Quantitative immunoassay of biotoxins on hydrogel-based protein microchips

Three-dimensional gel-based microchips with immobilized proteins were used for quantitative immunoassay of a series of plant (ricin and viscumin) and bacterial (staphylococcal enterotoxin B, tetanus and diphtheria toxins, and lethal factor of anthrax) toxins. It was shown that different types of immunoassays (direct, competitive, and sandwich type) could be carried out on gel microchips. As shown by confocal microscope studies, antigen-antibody interactions involving the formation of tertiary antibody-antigen-antibody complex occur in the whole volume of microchip gel elements. Sandwich assay on microchips with immobilized antibodies provided the highest sensitivity of detection (0.1 ng/ml for ricin). Antibodies labeled with fluorescent dyes, horseradish peroxidase conjugates, or biotinylated antibodies with subsequent treatment with labeled avidin were used as developing antibodies. The results of immunoassays were recorded using fluorescence, chemiluminescence, or matrix-assisted laser desorption ionization mass spectrometry directly from microchip gel elements. Gel microchips with immobilized capture antibodies were used to analyze the sample simultaneously for the presence of all six biotoxins with the same sensitivity as that for any single toxin.     

Parallel thermodynamic analysis of duplexes on oligodeoxyribonucleotide microchips.

A microchip method has been developed for massive and parallel thermodynamic analyses of DNA duplexes. Fluorescently labeled oligonucleotides were hybridized with oligonucleotides immobilized in the 100 x 100 x 20 mum gel pads of the microchips. The equilibrium melting curves for all microchip duplexes were measured in real time in parallel for all microchip duplexes. Thermodynamic data for perfect and mismatched duplexes that were obtained using the microchip method directly correlated with data obtained in solution. Fluorescent labels or longer linkers between the gel and the oligonucleotides appeared to have no significant effect on duplex stability. Extending the immobilized oligonucleotides with a four-base mixture from the 3'-end or one or two universal bases (5-nitroindole) from the 3'- and/or 5'-end increased the stabilities of their duplexes. These extensions were applied to increase the stabilities of the duplexes formed with short oligonucleotides in microchips, to significantly lessen the differences in melting curves of the AT- and GC-rich duplexes, and to improve discrimination of perfect duplexes from those containing poorly recognized terminal mismatches. This study explored a way to increase the efficiency of sequencing by hybridization on oligonucleotide microchips.     

Why 3-D? Gel-based microarrays in proteomics

Gel-based microarrays (biochips) consisting of nanoliter and sub-nanoliter gel drops on hydrophobic substrate are a versatile technology platform for immobilization of proteins and other biopolymers. Biochips provide a highly hydrophilic environment, which stabilizes immobilized molecules and facilitates their interactions with analytes. The probes are immobilized simultaneously with gel polymerization, evenly distributed throughout individual elements, and are easily accessible because of large pores. Each element is an isolated nanotube. Applications of biochips in the studies of protein interactions with other proteins, nucleic acids, and glycans are described. In particular, biochips are compatible with MALDI-MS. Biochip-based assay of prostate-specific antigen became the first protein microarray approved for clinical use by a national regulatory agency. In this review, 3-D immobilization is compared with mainstream technologies based on surface immobilization.     

Fractionation, phosphorylation and ligation on oligonucleotide microchips to enhance sequencing by hybridization.

Oligonucleotide microchips are manufactured by immobilizing presynthesized oligonucleotides within 0.1 x 0.1 x 0.02 mm or 1 x 1 x 0.02 mm polyacrylamide gel pads arranged on the surface of a microscope slide. The gel pads are separated from each other by hydrophobic glass spacers and serve as a kind of 'microtest tube' of 200 pl or 20 nl volume, respectively. Fractionation of single-stranded DNAs is carried out by their hybridization with chip pads containing immobilized 10mers. DNA extracted separately from each pad is transferred onto a sequencing chip and analyzed thereon. The chip, containing a set of 10mers, was enzymatically phosphorylated, then hybridized with DNA and ligated in a site-directed manner with a contiguously stacked 5mer. Several cycles of successive hybridization-ligation of the chip-bound 10mers with different contiguously stacked 5mers and hybridized with DNA were carried out to sequence DNA containing tetranucleotide repeats. Combined use of these techniques show significant promise for sequence comparison of homologous regions in different genomes and for sequence analysis of comparatively long DNA fragments or DNA containing internal repeats.     

Discrimination between perfect and mismatched duplexes with oligonucleotide gel microchips: role of thermodynamic and kinetic effects during hybridization

The efficiency of discrimination between perfect and mismatched duplexes during hybridization on microchips depends on the concentrations of target DNA in solution and immobilized probes, buffer composition, and temperature of hybridization and is determined by both thermodynamic relationships and hybridization kinetics. In this work, optimal conditions of discrimination were studied using hybridization of fluorescently labeled target DNA with custom-made gel-based oligonucleotide microchips. The higher the concentration of immobilized probes and the higher the association constant, the higher the concentration of the formed duplexes and the stronger the corresponding fluorescence signal, but, simultaneously, the longer the time needed to reach equilibrium. Since mismatched duplexes hybridize faster than their perfect counterparts, perfect-to-mismatch signal ratio is lower in transient regime, and short hybridization times may hamper the detection of mutations. The saturation time can be shortened by decreasing the probe concentration or augmenting the gel porosity. This improves the detection of mutations in transient regime. It is shown that the decrease in the initial concentration of oligonucleotide probes by an order of magnitude causes only 1.5-2.5-fold decrease of fluorescence signals after hybridization of perfect duplexes for 3-12 h. At the same time, these conditions improve the discrimination between perfect and mismatched duplexes more than two-fold. A similar improvement may be obtained using an optimized dissociation procedure.     

Biological Microchips with Hydrogel-Immobilized Nucleic Acids,Proteins, and Other Compounds: Properties and Applications in Genomics

The MAGIChip (MicroArrays of Gel-Immobilized Compounds on a chip) consists of an array of hydrophilic gel pads fixed on a hydrophobic glass surface. These pads of several picoliters to several nanoliters in volume contain gel-immobilized nucleic acids, proteins, and other compounds, as well as live cells. They are used to conduct chemical and enzymatic reactions with the immobilized compounds or samples bound to them. In the latter case, nucleic acid fragments can be hybridized, modified, and fractionated within the gel pads. The main procedures required to analyze nucleic acid sequences (PCR, detachment of primers and PCR-amplified products from a substrate, hybridization, ligation, and others) can be also performed within the microchip pads. A flexible, multipurpose, and inexpensive system has been developed to register the processes on a microchip. The system provides unique possibilities for research and biomedical applications, allowing one to register both equilibrium states and the course of reaction in real time. The system is applied to analyze both kinetic and thermodynamic characteristics of molecular interaction in the duplexes formed between nucleic acids and the probes immobilized within the microchip gel pads. Owing to the effect of stacking interaction of nucleic acids, the use of short oligonucleotides extends the possibilities of microchips for analysis of nucleic acid sequences, allowing one to employ the MALDI-TOF mass spectrometry to analyze the hybridization data. The specialized MAGIChips has been successfully applied to reveal single-nucleotide polymorphism of many biologically significant genes, to identify bacteria and viruses, to detect toxins and characterize the genes of pathogenic bacteria responsible for drug resistance, and to study translocations in the human genome. On the basis of the MAGIChip, protein microchips have been created, containing immobilized antibodies, antigens, enzymes, and many other substances, as well as microchips with gel-immobilized live cells.     

Biological microchips with hydrogel-immobilized nucleic acids,proteins, and other compounds: properties and applications in genomics

The MAGIChip (MicroArrays of Gel-Immobilized Compounds on a chip) consists of an array of hydrophilic gel pads fixed on a hydrophobic glass surface. These pads of several picoliters to several nanoliters in volume contain the gel-immobilized nucleic acids, proteins, and other compounds, as well as live cells. They are used to conduct chemical and enzymatic reactions with the immobilized compounds or samples bound to them. In the latter case, nucleic acid fragments can be hybridized, modified, and fractionated within the gel pads. The main procedures required to analyze nucleic acid sequences (PCR, detachment of primers and PCR-amplified products from a substrate, hybridization, ligation, and others) can be also performed within the microchip pads. A flexible, multipurpose, and inexpensive system has been developed to register the processes proceeding on a microchip. The system provides unique possibilities for research and biomedical applications, allowing one to register both equilibrium states and the course of reaction in real time. The system is applied to analyze both kinetic and thermodynamic characteristics of molecular interaction in the duplexes formed between nucleic acids and the probes immobilized within the microchip gel pads. Owing to the effect of stacking interaction of nucleic acids, the use of short oligonucleotides extends the possibilities of microchips for analysis of nucleic acid sequences, allowing one to employ the MALDI-TOF mass spectrometry to analyze the hybridization data. The specialized MAGIChips has been successfully applied to reveal single nucleotide polymorphism of many biologically significant genes, to identify bacteria and viruses, to detect toxins and characterize the genes of pathogenic bacteria responsible for drug resistance, and to study translocations in the human genome. On the basis of the MAGIChip, the protein microchips have been created, containing the immobilized antibodies, antigens, enzymes, and many other substances, as well as the microchips with the gel-immobilized live cells.     

Reversible covalent immobilization of ligands and proteins on polyacrylamide gels

Ligands and proteins were covalently but reversibly immobilized on polyacrylamide gels using novel acrylic monomers whose syntheses are reported here. These reagents have an acrylyl group at one end for copolymerization into gels, an N-succinimidyl ester at the other allowing rapid immobilization of molecules having an available primary amino group, and a cleavable disulfide bond in the middle. Two immobilization methods were developed using these reagents. In the first method, a ligand with a primary amino group was treated with the immobilization reagent in anhydrous ethanol and the resulting amide derivative was purified and copolymerized with acrylamide and bisacrylamide resulting in the desired reversible immobilization. In the second method, the immobilization reagents (at densities up to 50 mumol/ml) were directly copolymerized with acrylamide and bisacrylamide to form activated gels of the desired shape and porosity. Proteins or other ligands in aqueous buffers were then added to the activated gels resulting in their covalent immobilization. Ligands or proteins immobilized using the methods reported here remained stably bound even when gels were subjected to boiling in detergents or high-ionic-strength buffers. Immobilized ligands were readily released (greater than 97%) from gels by treatment with quantitative amounts of aqueous dithiothreitol (DTT) under mild conditions. Immobilized proteins were also released (up to 87%) from the gels by DTT treatment. Small ligands (e.g., aminohexyl glycosides), active enzymes, and glycoproteins were immobilized, and then recovered, using these reagents.     

Comparison of surface and hydrogel-based protein microchips

Protein microchips are designed for high-throughput evaluation of the concentrations and activities of various proteins. The rapid advance in microchip technology and a wide variety of existing techniques pose the problem of unified approach to the assessment and comparison of different platforms. Here we compare the characteristics of protein microchips developed for quantitative immunoassay with those of antibodies immobilized on glass surfaces and in hemispherical gel pads. Spotting concentrations of antibodies used for manufacturing of microchips of both types and concentrations of antigen in analyte solution were identical. We compared the efficiency of antibody immobilization, the intensity of fluorescence signals for both direct and sandwich-type immunoassays, and the reaction-diffusion kinetics of the formation of antibody-antigen complexes for surface and gel-based microchips. Our results demonstrate higher capacity and sensitivity for the hydrogel-based protein microchips, while fluorescence saturation kinetics for the two types of microarrays was comparable.     

An Activated GOPS‐poly‐L‐Lysine‐ Coated Glass Surface for the Immobilization of 60mer Oligonucleotides

To explore a method for enhancing the immobilization and hybridization efficiency of oligonucleotides on DNA microarrays, conventional protocols of poly‐L‐lysine coating were modified by means of surface chemistry, namely, the slides were prepared by the covalently coupling of poly‐L‐lysine to a glycidoxy‐modified glass surface. The modified slides were then used to print microarrays for the detection of the SARS coronavirus by means of 60mer oligonucleotide probes. The characteristics of the modified slides concerning immobilization efficiency, hybridization dynamics, and probe stripping cycles were determined. The improved surface exhibited high immobilization efficiency, a good quality uniformity, and satisfactory hybridization dynamics. The spotting concentration of 10 μmol/L can meet the requirements of detection; the spots were approximately 170 nm in diameter; the mean fluorescence intensity of the SARS spots were between 3.2 × 10⁴ and 5.0 × 10⁴ after hybridization. Furthermore, the microarrays prepared by this method demonstrated more resistance to consecutive probe stripping cycles. The activated GOPS‐PLL slide could undergo hybridization stripping cycles for at least three cycles, and the highest loss in fluorescence intensity was found to be only 11.9 % after the third hybridization. The modified slides using the above‐mentioned method were superior to those slides treated with conventional approaches, which theoretically agrees with the fact that modification by surface chemistry attaches the DNA covalently firmly to the slides. This protocol may have great promise in the future for application in large‐scale manufacture.     

Functionalization of poly(methyl methacrylate) (PMMA) as a substrate for DNA microarrays

A chemical procedure was developed to functionalize poly(methyl methacrylate) (PMMA) substrates. PMMA is reacted with hexamethylene diamine to yield an aminated surface for immobilizing DNA in microarrays. The density of primary NH₂ groups was 0.29 nmol/cm². The availability of these primary amines was confirmed by the immobilization of DNA probes and hybridization with a complementary DNA strand. The hybridization signal and the hybridization efficiency of the chemically aminated PMMA slides were comparable to the hybridization signal and the hybridization efficiency obtained from differently chemically modified PMMA slides, silanized glass, commercial silylated glass and commercial plastic Euray™ slides. Immobilized and hybridized densities of 10 and 0.75 pmol/cm², respectively, were observed for microarrays on chemically aminated PMMA. The immobilized probes were heat stable since the hybridization performance of microarrays subjected to 20 PCR heat cycles was only reduced by 4%. In conclusion, this new strategy to modify PMMA provides a robust procedure to immobilize DNA, which is a very useful substrate for fabricating single use diagnostics devices with integrated functions, like sample preparation, treatment and detection using microfabrication and microelectronic techniques.