Production of minicellulosomes from Clostridium cellulovorans in Bacillus subtilis WB800

Two genes encoding EngB endoglucanase and mini-CbpA1 scaffolding protein of Clostridium cellulovorans were constructed and coexpressed in Bacillus subtilis WB800. The resulting minicellulosomes were isolated by gel filtration chromatography and characterized. Biochemical and immunological evidence indicated that fraction II contained minicellulosomes consisting of mini-CbpA1 and EngB. The in vivo synthesis of minicellulosomes suggests that it will be possible in the future to insert into B. subtilis cellulosomal genes that will allow growth on cellulosic materials and the production of various designer cellulosomes with specific functions.     

Architecture and Assembly of the Bacillus subtilis Spore Coat

Bacillus spores are encased in a multilayer, proteinaceous self-assembled coat structure that assists in protecting the bacterial genome from stresses and consists of at least 70 proteins. The elucidation of Bacillus spore coat assembly, architecture, and function is critical to determining mechanisms of spore pathogenesis, environmental resistance, immune response, and physicochemical properties. Recently, genetic, biochemical and microscopy methods have provided new insight into spore coat architecture, assembly, structure and function. However, detailed spore coat architecture and assembly, comprehensive understanding of the proteomic composition of coat layers, and specific roles of coat proteins in coat assembly and their precise localization within the coat remain in question. In this study, atomic force microscopy was used to probe the coat structure of Bacillus subtilis wild type and cotA, cotB, safA, cotH, cotO, cotE, gerE, and cotE gerE spores. This approach provided high-resolution visualization of the various spore coat structures, new insight into the function of specific coat proteins, and enabled the development of a detailed model of spore coat architecture. This model is consistent with a recently reported four-layer coat assembly and further adds several coat layers not reported previously. The coat is organized starting from the outside into an outermost amorphous (crust) layer, a rodlet layer, a honeycomb layer, a fibrous layer, a layer of “nanodot” particles, a multilayer assembly, and finally the undercoat/basement layer. We propose that the assembly of the previously unreported fibrous layer, which we link to the darkly stained outer coat seen by electron microscopy, and the nanodot layer are cotH- and cotE- dependent and cotE-specific respectively. We further propose that the inner coat multilayer structure is crystalline with its apparent two-dimensional (2D) nuclei being the first example of a non-mineral 2D nucleation crystallization pattern in a biological organism.     

Growth of the Bacillus subtilis cell surface

A double mutant strain, Bacillus subtilis div IV B1 dal trp, has been constructed which grows as filamentous cells and minicells and requires d-alanine for growth. Removal of d-alanine from a growing population of cells resulted in cell bulging 25% of the cell length from one cell pole, followed by cell lysis. Little ultrastructural change in the cell envelope could be detected during bulge formation.     

Assembly of multiple CotC forms into the Bacillus subtilis spore coat

We report evidence that the CotC polypeptide, a previously identified component of the Bacillus subtilis spore coat, is assembled into at least four distinct forms. Two of these, having molecular masses of 12 and 21 kDa, appeared 8 h after the onset of sporulation and were probably assembled on the forming spore immediately after their synthesis, since no accumulation of either of them was detected in the mother cell compartment, where their synthesis occurs. The other two components, 12.5 and 30 kDa, were generated 2 h later and were probably the products of posttranslational modifications of the two early forms occurring directly on the coat surface during spore maturation. None of the CotC forms was found either on the spore coat or in the mother cell compartment of a cotH mutant. This indicates that CotH serves a dual role of stabilizing the early forms of CotC and promoting the assembly of both early and late forms on the spore surface.     

Assembly of the SpoIIIE DNA translocase depends on chromosome trapping in Bacillus subtilis

Sporulation in Bacillus subtilis is an attractive system in which to study the translocation of a chromosome across a membrane. Sporulating cells contain two sister chromosomes that are condensed in an elongated axial filament with the origins of replication anchored at opposite poles of the sporangium. The subsequent formation of a septum near one pole divides the sporangium unequally into a forespore (the smaller compartment) and a mother cell. The septum forms around the filament, trapping the origin-proximal region of one chromosome in the forespore. As a consequence, the trapped chromosome transverses the septum with the remainder being left in the mother cell. Next, SpoIIIE assembles at the middle of the septum to create a translocase that pumps the origin-distal, two-thirds of the chromosome into the forespore. Here, we address the question of how the DNA translocase assembles and how it localizes to the septal midpoint. We present evidence that DNA transversing the septum is an anchor that nucleates the formation of the DNA translocase. We propose that DNA anchoring is responsible for the assembly of other SpoIIIE-like DNA translocases, such as those that remove trapped chromosomes from the division septum of cells undergoing binary fission.     

Assembly of pili on the surface of Bacillus cereus vegetative cells

Vegetative forms of Bacillus cereus are reported to form pili, thin protein filaments that protrude up to 1 mum from the bacterial surface. Pili are assembled from two precursor proteins, BcpA and BcpB, in a manner requiring a pilus-associated sortase enzyme (SrtD). Pili are also formed on the surface of Bacillus anthracis expressing bcpA-srtD-bcpB. BcpA is distributed throughout the entire pilus, whereas BcpB appears positioned at its tip. In agreement with the hypothesis for pilus assembly in Gram-positive bacteria, BcpA encompasses the YPK pilin motif and the LPXTG sorting signal, each of which is absolutely required for the incorporation of BcpA and BcpB into pili. In contrast to BcpB, which relies on the presence of BcpA for incorporation into pili, BcpA fibre assembly occurs even in the absence of BcpB. B. anthracis sortase A (srtA), but not sortase B (srtB) or C (srtC), is required for proper anchoring of pili to the bacterial envelope, suggesting that BcpA/BcpB pili are linked to peptidoglycan cross-bridges.     

Assembly and function of a spore coat-associated transglutaminase of Bacillus subtilis

The assembly of a multiprotein coat around the Bacillus subtilis spore confers resistance to lytic enzymes and noxious chemicals and ensures normal germination. Part of the coat is cross-linked and resistant to solubilization. The coat contains epsilon-(gamma-glutamyl)lysyl cross-links, and the expression of the gene (tgl) for a spore-associated transglutaminase was shown before to be required for the cross-linking of coat protein GerQ. Here, we have investigated the assembly and function of Tgl. We found that Tgl associates, albeit at somewhat reduced levels, with the coats of mutants that are unable to assemble the outer coat (cotE), that are missing the inner coat and with a greatly altered outer coat (gerE), or that are lacking discernible inner and outer coat structures (cotE gerE double mutant). This suggests that Tgl is present at various levels within the coat lattice. The assembly of Tgl occurs independently of its own activity, as a single amino acid substitution of a cysteine to an alanine (C116A) at the active site of Tgl does not affect its accumulation or assembly. However, like a tgl insertional mutation, the tglC116A allele causes increased extractability of polypeptides of about 40, 28, and 16 kDa in addition to GerQ (20 kDa) and affects the structural integrity of the coat. We show that most Tgl is assembled onto the spore surface soon after its synthesis in the mother cell under sigma(K) control but that the complete insolubilization of at least two of the Tgl-controlled polypeptides occurs several hours later. We also show that a multicopy allele of tgl causes increased assembly of Tgl and affects the assembly, structure, and functional properties of the coat.     

Functional Analysis of the Accessory Protein TapA in Bacillus subtilis Amyloid Fiber Assembly

Bacillus subtilis biofilm formation relies on the assembly of a fibrous scaffold formed by the protein TasA. TasA polymerizes into highly stable fibers with biochemical and morphological features of functional amyloids. Previously, we showed that assembly of TasA fibers requires the auxiliary protein TapA. In this study, we investigated the roles of TapA sequences from the C-terminal and N-terminal ends and TapA cysteine residues in its ability to promote the assembly of TasA amyloid-like fibers. We found that the cysteine residues are not essential for the formation of TasA fibers, as their replacement by alanine residues resulted in only minor defects in biofilm formation. Mutating sequences in the C-terminal half had no effect on biofilm formation. However, we identified a sequence of 8 amino acids in the N terminus that is key for TasA fiber formation. Strains expressing TapA lacking these 8 residues were completely defective in biofilm formation. In addition, this TapA mutant protein exhibited a dominant negative effect on TasA fiber formation. Even in the presence of wild-type TapA, the mutant protein inhibited fiber assembly in vitro and delayed biofilm formation in vivo. We propose that this 8-residue sequence is crucial for the formation of amyloid-like fibers on the cell surface, perhaps by mediating the interaction between TapA or TapA and TasA molecules.     

Surfactin and iturin A effects on Bacillus subtilis surface hydrophobicity

The synthesis of extracellular molecules such as biosurfactants should have major consequences on bacterial adhesion. These molecules may be adsorbed on surfaces and modify their hydrophobicities. Certain strains of Bacillus subtilis synthesize the lipopeptides, which exhibit antibiotic and surface active properties. In this study the high-performance liquid chromatography (HPLC) analysis of the culture supernatants of the seven B. subtilis strains, showed that the lipopeptide profile varied greatly according to the strain. Among the three lipopeptide types, only iturin A was produced by all B. subtilis strains. Bacterial hydrophobicity, evaluated by the water contact angle measurements and the hydrophobic interaction chromatography, varied according to the strain. Two strains (ATCC 15476 and ATCC 15811) showing extreme behaviors in term of hydrophobicity were selected to study surfactin and iturin A effects on bacterial hydrophobicity. The two lipopeptides modified the B. subtilis surface hydrophobicity. Their effects varied according to the bacterial surface hydrophobic character, the lipopeptide type and the concentration. Lipopeptide adsorption increased the hydrophobicity of the hydrophilic strain but decreased that of the hydrophobic. Comparison of lipopeptide effects on B. subtilis surface hydrophobicity showed that surfactin was more effective than iturin A for the two strains tested.     

Assembly of the CotSA coat protein into spores requires CotS in Bacillus subtilis

The CotSA protein, encoded by cotSA (ytxN) of Bacillus subtilis, was detected from the cells at 5 h after the onset of sporulation (T5) and in the spore coat of wild-type cells, but not in cotE, cotS, gerE, or cotSA mutant spores. CotSA was also detected in the sporangium at T5 to T7 but not in the sporangium at T18 of cotS mutant cells, while the incorporation of CotS into the coat was not dependent upon CotSA. These results suggested that CotSA was synthesized simultaneously with CotS during T5 to T7 of sporulation and assembled into the coat dependent upon CotS.     

Influence of electrical properties on the evaluation of the surface hydrophobicity of Bacillus subtilis

The surface hydrophobicity of nine Bacillus subtilis strains in different states (spores, vegetative cells, and dead cells) was assessed by water contact angle measurements, hydrophobic interaction chromatography (HIC) and bacterial adhesion to hydrocarbon (BATH). Electrokinetic properties of B. subtilis strains were characterized by zeta potential measurements and found to differ appreciably according to the strain. Correlations between HIC data, BATH data and zeta potential showed that HIC and BATH are influenced by electrostatic interactions. Water contact angle measurements thus provide a better estimate of cell surface hydrophobicity. The water contact angle of B. subtilis varied according to the strain and the state, the spores tending to be more hydrophobic than vegetative cells.     

Cloning of the Bacillus subtilis sulfanilamide resistance gene in Bacillus subtilis

A recombinant plasmid was constructed by ligation of chromosomal DNA from a sulfanilamide-resistant strain of Bacillus subtilis to the plasmid vector pUB110 which specifies neomycin resistance. Recombinant molecules generated in vitro were introduced into a B. subtilis recipient strain which carried the recE4 mutation, and selection was for neomycin-sulfanilamide-resistant transformants. A single colony was isolated containing the recombinant plasmid pKO101. This 6.3-megadalton plasmid simultaneously conferred resistance to neomycin and sulfanilamide when transferred into sensitive Rec+ or Rec- cells by either transduction or transformation.     

Stress related changes of cell surface hydrophilicity in Bacillus subtilis

The changes of cell surface hydrophilicity in Bacillus subtilis were analyzed in response to oxygen-limitation, heat shock, salt stress, pH-shock, phosphate- and carbon-limitation. Although cell surface hydrophilicity varied during growth phases, an increase of surface hydrophilicity was observed under several of these stress conditions. An observed drop in intracellular GTP and/or ATP may be an element of the signal transduction pathway leading to an increase in surface hydrophilicity in response to environmental stresses. Attachment of cells to soil particles under salt stress conditions is strongly influenced by the degS/degU two-component system, which thereby provides a mechanism for the bacteria to escape from the hostile environment.     

Assembly requirements and role of CotH during spore coat formation in Bacillus subtilis

We report Western blot data showing that the 42.8-kDa product of the previously characterized cotH locus (8) is a structural component of the Bacillus subtilis spore coat. We show that the assembly of CotH requires both CotE and GerE. In agreement with these observations, the ultrastructural analysis of purified spores suggests that CotH is needed for proper formation of both inner and outer layers of the coat.     

Immobilization of alkaline polygalacturonate lyase from Bacillus subtilis on the surface of bacterial polyhydroxyalkanoate nano-granules

Applied Microbiology and Biotechnology - Alkaline polygalacturonate lyase (PGL), one of the pectinolytic enzymes, has been widely used for the bioscouring of cotton fibers, biodegumming, and...