A Carbon Footprint of Textile Recycling: A Case Study in Sweden

Global population growth and rising living standards are increasing apparel consumption. Consequently, consumption of resources and generation of textile waste are increasing. According to the Swedish Environmental Protection Agency, textile consumption increased by 40% between the years 2000 and 2009 in Sweden. Given that there is currently no textile recycling plant in Sweden, the aim of this article is to explore the potential environmental benefits of various textile recycling techniques and thereby direct textile waste management strategies toward more sustainable options. Three different recycling techniques for a model waste consisting of 50% cotton and 50% polyester were identified and a life cycle assessment (LCA) was made to assess the environmental performance of them. The recycling processes are: material reuse of textile waste of adequate quality; separation of cellulose from polyester using N‐methylmorpholine‐N‐oxide as a solvent; and chemical recycling of polyester. These are compared to incineration, representing conventional textile waste treatment in Sweden. The results show that incineration has the highest global warming potential and primary energy usage. The material reuse process exhibits the best performance of the studied systems, with savings of 8 tonnes of carbon dioxide equivalents (CO₂‐eq) and 164 gigajoules (GJ) of primary energy per tonne of textile waste. Sensitivity analyses showed that results are particularly sensitive to the considered yields of the processes and to the choice of replaced products. An integration of these recycling technologies for optimal usage of their different features for treatment of 1 tonne of textile waste shows that 10 tonnes CO₂‐eq and 169 GJ of primary energy could be saved.     

Production,purification, and characterization of a fusion protein of carbonic anhydrase from Neisseria gonorrhoeae and cellulose binding domain from Clostridium thermocellum

Carbon dioxide capture technologies have the potential to become an important climate change mitigation option through sequestration of gaseous CO₂. A new concept for CO₂ capture involves use of immobilized carbonic anhydrase (CA) that catalyzes the reversible hydration of CO₂ to HCO₃^? and H⁺. Cost‐efficient production of the enzyme and an inexpensive immobilization system are critical for development of economically feasible CA‐based CO₂ capture processes. An artificial, bifunctional enzyme containing CA from Neisseria gonorrhoeae and a cellulose binding domain (CBD) from Clostridium thermocellum was constructed with a His₆ tag. The chimeric enzyme exhibited both CA activity and CBD binding affinity. This fusion enzyme is of particular interest due to its binding affinity for cellulose and retained CA activity, which could serve as the basis for improved technology to capture CO₂ from flue gasses. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Tandem chemical deconstruction and biological upcycling of poly(ethylene terephthalate) to β-ketoadipic acid by Pseudomonas putida KT2440

Poly(ethylene terephthalate) (PET) is the most abundantly consumed synthetic polyester and accordingly a major source of plastic waste. The development of chemocatalytic approaches for PET depolymerization to monomers offers new options for open-loop upcycling of PET, which can leverage biological transformations to higher-value products. To that end, here we perform four sequential metabolic engineering efforts in Pseudomonas putida KT2440 to enable the conversion of PET glycolysis products via: (i) ethylene glycol utilization by constitutive expression of native genes, (ii) terephthalate (TPA) catabolism by expression of tphA2_IIA3_IIB_IIA1_II from Comamonas and tpaK from Rhodococcus jostii, (iii) bis(2-hydroxyethyl) terephthalate (BHET) hydrolysis to TPA by expression of PETase and MHETase from Ideonella sakaiensis, and (iv) BHET conversion to a performance-advantaged bioproduct, β-ketoadipic acid (βKA) by deletion of pcaIJ. Using this strain, we demonstrate production of 15.1 g/L βKA from BHET at 76% molar yield in bioreactors and conversion of catalytically depolymerized PET to βKA. Overall, this work highlights the potential of tandem catalytic deconstruction and biological conversion as a means to upcycle waste PET.     

来源于海洋宏基因组塑料降解酶Ple629的耐热性提升改造

石化来源的聚酯类塑料如聚对苯二甲酸乙二醇酯(polyethylene terephthalate,PET)以及聚己二酸/对苯二甲酸丁二醇酯(polybutylene adipate terephthalate,PBAT)等已被广泛使用,但由于它们在自然界中难以降解或生物降解周期较长导致了严重的环境污染,因此对这些塑料废弃物的处理是亟待解决的问题之一。从循环经济的角度考虑,利用生物酶法对聚酯类塑料如PET或PBAT等的废弃物进行解聚,再将解聚产物进行循环利用,是一个很有潜力的研究方向。探究近年来关于聚酯塑料降解酶的报道发现,高活性且耐高温的降解酶会有更大的潜在优势。来自海洋微生物宏基因组的中温塑料降解酶Ple629,在常温下对聚酯类塑料PET和PBAT均有较好的降解活力,但由于不耐受高温,限制了其潜在应用。在前期获得Ple629三维结构的基础上,本研究基于结构比对及能量设计,找到了一些潜在提升其热稳定性的位点进行改造设计,并对突变体进行了表达纯化和热稳定性测定。突变体V80C和D226C/S281C的熔点温度(Tm)值分别提升了5.2℃和6.9℃,突变体D226C/S281C的活性也比野生型酶提高了1.5倍,为后续对Ple629的进一步改造提供了思路和依据。     

Production of a novel copolyester of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids by Pseudomonas sp. 61-3 from sugars

 Pseudomonas sp. 61-3 (isolated from soil) produced a polyester consisting of 3-hydroxybutyric acid (3HB) and of medium-chain-length 3-hydroxyalkanoic acids (3HA) of C₆, C₈, C₁₀ and C₁₂, when sugars of glucose, fructose and mannose were fed as the sole carbon source. The polyester produced was a blend of homopolymer and copolymer, which could be fractionated with boiling acetone. The acetone-insoluble fraction of the polyester was a homopolymer of 3-hydroxybutyrate units [poly (3HB)], while the acetone-soluble fraction was a copolymer [poly(3HB-co-3HA)] containing both short- and medium-chain-length 3-hydroxyalkanoate units ranging from C₄ to C₁₂:44 mol% 3-hydroxybutyrate, 5 mol% 3-hydroxyhexanoate, 21 mol% 3-hydroxyoctanoate, 25 mol% 3-hydroxydecanoate, 2 mol% 3-hydroxydodecanoate and 3 mol% 3-hydroxy-5-cis-dodecenoate. The copolyester was shown to be a random copolymer of 3-hydroxybutyrate and medium-chain-length 3-hydroxyalkanoate units by analysis of the ¹³C-NMR spectrum. The poly(3HB) homopolymer and poly (3HB-co-3HA) copolymer were produced simultaneously within cells from glucose in the absence of any nitrogen source, which suggests that Pseudomonas sp. 61-3 has two types of polyhydroxy-alkanoate syntheses with different substrate specificities. Received: 9 June 1995/Received last revision: 30 October 1995/Accepted: 6 November 1995     

Thermophilic whole-cell degradation of polyethylene terephthalate using engineered Clostridium thermocellum

Polyethylene terephthalate (PET) is a mass-produced synthetic polyester contributing remarkably to the accumulation of solid plastics waste and plastics pollution in the natural environments. Recently, bioremediation of plastics waste using engineered enzymes has emerged as an eco-friendly alternative approach for the future plastic circular economy. Here we genetically engineered a thermophilic anaerobic bacterium, Clostridium thermocellum, to enable the secretory expression of a thermophilic cutinase (LCC), which was originally isolated from a plant compost metagenome and can degrade PET at up to 70°C. This engineered whole-cell biocatalyst allowed a simultaneous high-level expression of LCC and conspicuous degradation of commercial PET films at 60°C. After 14 days incubation of a batch culture, more than 60% of the initial mass of a PET film (approximately 50 mg) was converted into soluble monomer feedstocks, indicating a markedly higher degradation performance than previously reported whole-cell-based PET biodegradation systems using mesophilic bacteria or microalgae. Our findings provide clear evidence that, compared to mesophilic species, thermophilic microbes are a more promising synthetic microbial chassis for developing future biodegradation processes of PET waste.     

Treatment of Furfural Residue by Solvent Extraction for Enzymatic Hydrolysis: Effect of Delignification on the Structure and Digestibility

The effect of different treatments on the enzymatic hydrolysis of furfural residue (FR) was investigated in delignification and structural features. In this case, hot water, ethanol, sodium hydroxide, alkali ethanol, and alkaline hydrogen peroxide solution (AHP) were selected as the delignification solvents. The structure and morphology of the original and treated samples were comparatively studied by diffuse reflectance infrared Fourier transform spectrometry (DRIFT), XRD, SEM, and CP/MAS ¹³C NMR. After AHP treatment, the ratio of total lignin to cellulose content in FR and the absorbance ratio of lignin to cellulose (A ₁₅₀₈/A ₁₀₅₇) on the sample surface in the DRIFT spectra was reduced from 0.99 to 0.13 and from 0.40 to 0.04, respectively, which resulted in the highest conversion of cellulose to glucose (99.3 %). It was found that the crystallinity index of FR linearly increased with the decrease of total lignin to cellulose ratio. DRIFT analysis indicated that the high lignin content on the sample surface resulted in a low enzymatic hydrolysis efficiency.     

Fluorine-18 click radiosynthesis and microPET/CT evaluation of a small peptide-a potential PET probe for carbonic anhydrase IX

Carbonic anhydrase IX (CA IX) is the first carbonic anhydrase found to be associated with cancer that is over-expressed in a variety of human solid tumors. As a surrogate marker for hypoxia, the expression of CA IX is strongly upregulated in hypoxic tumors by hypoxia and hypoxia-inducible factor 1a (HIF-1a). In our pursuit of a CA IX-specific PET probe, we designed and synthesized a peptide-based CA IX imaging probe by the efficient click reaction of 1,3-dipolar cycloaddition of terminal alkynes and organic azides. The probe ¹⁸F-CA IX-P1-4-10 was obtained with a radiochemical yield of 35–45% (n?=?5) and radiochemical purity of >99% in 70–80?min (HPLC purification time included). ¹⁸F-CA IX-P1-4-10 had good stability in phosphate buffered saline (PBS), but about 51% peptide degradation was detected in new-born calf serum (NBCS) after incubation. Preliminary microPET/CT experiments demonstrated a specific uptake of ¹⁸F-CA IX-P1-4-10 in HT29 tumor and the uptake of ¹⁸F-CA IX-P1-4-10 was blocked by peptide CA IX-P1-4-10-Yne pretreatment. Immunohistochemical staining and western blotting studies confirmed the HT29 tumor was CA IX-positive which further proved tumor accumulation of ¹⁸F-CA IX-P1-4-10 was correlated with CA IX expression. The results suggest that ¹⁸F-CA IX-P1-4-10 is a promising PET tracer for the specific imaging of CA IX-expressing tumors at the molecular level.     

Carbonic anhydrase and C4 photosynthesis: a transgenic analysis

Carbonic anhydrase (CA, EC 4.2.1.1) catalyses the first reaction in the C₄ photosynthetic pathway, the conversion of atmospheric CO₂ to bicarbonate in the mesophyll cytosol. To examine the importance of the enzyme to the functioning of the C₄ photosynthetic pathway, Flaveria bidentis (L.) Kuntze, a C₄ dicot, was genetically transformed with an antisense construct in which the cDNA encoding a putative cytosolic CA (CA3) was placed under the control of a constitutive promoter. Some of the primary transformants had impaired CO₂ assimilation rates and required high CO₂ for growth. The T₁ progeny of four primary transformants were used to examine the quantitative relationship between leaf CA activity and CO₂ assimilation rate. CA activity was determined in leaf extracts with a mass spectrometric technique that measured the rate of ¹⁸O exchange from doubly labelled ¹³C¹⁸O₂. Steady‐state CO₂ assimilation rates were unaffected by a decrease in CA activity until CA activity was less than 20% of wild type when they decreased steeply. Transformants with less than 10% of wild‐type CA activity had very low CO₂ assimilation rates and grew poorly at ambient CO₂ partial pressure. Reduction in CA activity also increased the CO₂ partial pressure required to saturate CO₂ assimilation rates. The present data show that CA activity is essential for the functioning of the C₄ photosynthetic pathway.     

PHOTOSYNTHETIC UTILIZATION OF INORGANIC CARBON IN THE ECONOMIC BROWN ALGA,HIZIKIA FUSIFORME (SARGASSACEAE) FROM THE SOUTH CHINA SEA1

The mechanism of inorganic carbon (C_i) acquisition by the economic brown macroalga, Hizikia fusiforme (Harv.) Okamura (Sargassaceae), was investigated to characterize its photosynthetic physiology. Both intracellular and extracellular carbonic anhydrase (CA) were detected, with the external CA activity accounting for about 5% of the total. Hizikia fusiforme showed higher rates of photosynthetic oxygen evolution at alkaline pH than those theoretically derived from the rates of uncatalyzed CO₂ production from bicarbonate and exhibited a high pH compensation point (pH 9.66). The external CA inhibitor, acetazolamide, significantly depressed the photosynthetic oxygen evolution, whereas the anion‐exchanger inhibitor 4,4′‐diisothiocyano‐stilbene‐2,2′‐disulfonate had no inhibitory effect on it, implying the alga was capable of using HCO₃^? as a source of C_i for its photosynthesis via the mediation of the external CA. CO₂ concentrations in the culture media affected its photosynthetic properties. A high level of CO₂ (10,000 ppmv) resulted in a decrease in the external CA activity; however, a low CO₂ level (20 ppmv) led to no changes in the external CA activity but raised the intracellular CA activity. Parallel to the reduction in the external CA activity at the high CO₂ was a reduction in the photosynthetic CO₂ affinity. Decreased activity of the external CA in the high CO₂ grown samples led to reduced sensitiveness of photosynthesis to the addition of acetazolamide at alkaline pH. It was clearly indicated that H. fusiforme, which showed CO₂‐limited photosynthesis with the half‐saturating concentration of C_i exceeding that of seawater, did not operate active HCO₃^? uptake but used it via the extracellular CA for its photosynthetic carbon fixation.     

Regulation of the mechanism for HCO 3 − use by the inorganic carbon level in Porphyra leucosticta Thur. in Le Jolis (Rhodophyta)

The capacity for HCO₃ ⁻ use by Porphyra leucosticta Thur. in Le Jolis grown at different concentrations of inorganic carbon (C_i) was investigated. The use of HCO₃ ⁻ at alkaline pH by P. leucosticta was␣demonstrated by comparing the O₂ evolution rates measured with the O₂ evolution rates theoretically supported by the CO₂ spontaneously formed from HCO₃ ⁻ . Both external and internal carbonic anhydrase (CA; EC 4.2.1.1) were implied in HCO₃ ⁻ use during photosynthesis because O₂ evolution rates and the increasing pH during photosynthesis were inhibited in the presence of azetazolamide and ethoxyzolamide (inhibitors for external and total CA respectively). Both external and internal CA were regulated by the C_i level at which the algae were grown. A high C_i level produced a reduction in total CA activity and a low C_i level produced an increase in total CA activity. In contrast, external CA was increased at low C_i although it was not affected at high C_i . Parallel to the reduction in total CA activity at high C_i is a reduction in the affinity for C_i, as estimated from photosynthesis versus C_i curves, was found. However, there was no evident relationship between external CA activity and the capacity for HCO₃ ⁻ use because the presence of external CA became redundant when P. leucosticta was cultivated at high C_i. Our results suggest that the system for HCO₃ ⁻ use in P. leucosticta is composed of different elements that can be activated or inactivated separately. Two complementary hypotheses are postulated: (i) internal CA is an absolute requirement for a functioning C_i-accumulation mechanism; (ii) there is a CO₂ transporter that works in association with external CA. Received: 20 April 1996 / Accepted: 5 August 1996     

Immobilization and characterization of carbonic anhydrase purified from E. coli MO1 and its influence on CO2 sequestration

The present investigation entails the immobilisation and characterisation of Escherichia coli MO1-derived carbonic anhydrase (CA) and its influence on the transformation of CO₂ to CaCO₃. CA was purified from MO1 using a combination of Sephadex G-75 and DEAE cellulose column chromatography, resulting in 4.64-fold purification. The purified CA was immobilised in chitosan-alginate polyelectrolyte complex (C-A PEC) with an immobilisation potential of 94.5 %. Both the immobilised and free forms of the enzyme were most active and stable at pH 8.2 and at 37 °C. The K _m and V _max of the immobilised enzyme were found to be 19.12 mM and 416.66 μmol min^?1 mg^?1, respectively; whereas, the K _m and V _max of free enzyme were 18.26 mM and 434.78 μmol min^?1 mg^?1, respectively. The presence of metal ions such as Cu²⁺, Fe²⁺, and Mg²⁺ stimulated the enzyme activity. Immobilised CA showed higher storage stability and maintained its catalytic efficiency after repeated operational cycles. Furthermore, both forms of the enzyme were tested for targeted application of the carbonation reaction to convert CO₂ to CaCO₃. The amounts of CaCO₃ precipitated over free and immobilised CA were 267 and 253 mg/mg of enzyme, respectively. The results of this study show that immobilised CA in chitosan-alginate beads can be useful for CO₂ sequestration by the biomimetic route.     

Immobilization of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> β-galactosidase on low-pressure plasma-modified cellulose acetate membrane using polyethyleneimine for production of galactooligosaccharide

The aim of this study was to produce galactooligosaccharides (GOS) from lactose using β-galactosidase from Aspergillus oryzae immobilized on a low-pressure plasma-modified cellulose acetate (CA) membrane. Specifically, a novel method was developed for multilayer enzyme immobilization involving polyethyleneimine (PEI)-enzyme aggregate formation and growth on a CA membrane. A large amount of enzyme (997 μg/cm² membrane) was immobilized with 66% efficiency. The K _m value for the immobilized enzyme was estimated to be 48 mM, which indicates decreased affinity for the substrate, whereas the Vmax value was smaller. The immobilized enzyme showed good storage and operational stability. The half-life of the immobilized enzyme on the membrane was about 1 month at 30°C and ∼ 60 h at 60°C. Maximum GOS production of 27% (w/w) was achieved with 70% lactose conversion from 320 g/L of lactose at pH 4.5 and 60°C. Trisaccharides were the major types of GOS formed and accounted for about 75% of the total GOS produced. Based on these results, immobilized enzyme technology could be applied to GOS production from lactose.     

Effects of heat treatment on hydrogen production potential and microbial community of thermophilic compost enrichment cultures

Cellulosic plant and waste materials are potential resources for fermentative hydrogen production. In this study, hydrogen producing, cellulolytic cultures were enriched from compost material at 52, 60 and 70 °C. Highest cellulose degradation and highest H₂ yield were 57% and 1.4 mol-H₂ mol-hexose⁻¹ (2.4 mol-H₂ mol-hexose-degraded⁻¹), respectively, obtained at 52 °C with the heat-treated (80 °C for 20 min) enrichment culture. Heat-treatments as well as the sequential enrichments decreased the diversity of microbial communities. The enrichments contained mainly bacteria from families Thermoanaerobacteriaceae and Clostridiaceae, from which a bacterium closely related to Thermoanaerobium thermosaccharolyticum was mainly responsible for hydrogen production and bacteria closely related to Clostridium cellulosi and Clostridium stercorarium were responsible for cellulose degradation.     

Seizure Activity Produces Differential Changes in Adenosine A1 Receptors within Rat Hippocampus

Specific ligand binding to rat hippocampal adenosine A₁ receptor after administration of the convulsant drug 3-mercaptopropionic acid (MP) was studied by means of a quantitative autoradiographic method. 2-Chloro-N6-[cyclopentyl-2,3,4,5-³H adenosine] ([³H]CCPA), a potent and selective A₁ receptor ligand, was selected for binding studies. MP administration (150 mg/kg, i.p.), at seizure, caused significant increases in the following CA1 layers: pyramidal (45%), radiatum (18%) and lacunosum molecular (35%); in CA2 area, a significant decrease in stratum oriens (36%) and an increase in stratum radiatum (14%) and lacunosum molecular (33%) layers was observed. In CA3 area a rise in pyramidal (40%) and radiatum layers (26%), as well as in hillus (97%) was found. At postseizure, changes were restricted to CA1, CA2 and CA3 pyramidal layers and to CA1 lacunosum molecular layer, with increases ranging from 22 to 50%. These results show that [³H]CCPA binding is modified diversely in intrahippocampal layers and areas, thus indicating their dissimilar role in seizure activity.     

The dependence of pyrolysis behavior on the crystal state of cellulose

Cellulose was dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride, and then regenerated from the solution by using different methods. Thermogravimetric analysis (TG)-Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM) were used to characterize the structure of the original and regenerated cellulose. Cellulose II or amorphous cellulose was obtained by pouring cellulose solution into de-ioned water or pouring de-ioned water into cellulose solution, respectively. The pyrolysis behavior of original and regenerated cellulose was tested in a fixed bed reactor. The pyrolysis of cellulose I gave high content of furfural and 1,4;3,6-dianhydro-alpha-d-glucopyranose in the liquid products, and cellulose II and amorphous cellulose gave high content of furfural and 5-(hydroxymethyl)-2-furancarboxyaldehyde, with 5-(hydroxymethyl)-2-furancarboxyaldehyde the highest for cellulose II and furfural the highest for amorphous cellulose. And the treatment of the cellulose samples favored the removal of oxygen in the form of CO₂ in the pyrolysis.     

Accuracy of target delineation by positron emission tomography-based auto-segmentation methods after deformable image registration: A phantom study

PurposeDiagnostic positron emission tomography and computed tomography (PET/CT) images can be fused to the planning CT images by a deformable image registration (DIR). The aim of this study was to evaluate the standardized uptake value (SUV) and target delineation on deformed PET images.MethodsWe used a cylindrical phantom and removable inserts of four spheres (16–38 mm in diameter) and three ellipsoids with a volume equal to the 38-mm-diameter sphere (S38) in each. S38 was filled with 18F-fluorodeoxyglucose activity, and then PET/CT images were acquired. The contours of S38 were generated using original PET images by PET auto-segmentation (PET-AS) methods of (1) SUV2.5, (2) 40% of maximum SUV (SUV40%max), and (3) gradient-based (GB), and were deformed to the other inserts by DIR. We compared the volumes and the SUV_max with the generated contours using the deformed PET images.ResultsThe SUV_max was slightly decreased by DIR; the mean absolute difference was −0.10 ± 0.04. For SUV2.5 and SUV40%max, the differences in S38 volumes between the original and deformed PET images were less than 5%, regardless of deformation type. For the GB, the contoured volumes obtained from deformed PET images were larger than those of the original PET images for the deformation type of ellipsoids. When the S38 was deformed to the 16-mm-diameter sphere, the maximum volume difference was −22.8%.ConclusionsAlthough SUV fluctuations by DIR were negligible, the target delineation on deformed PET images by the GB should be carefully considered owing to the distortion of intensity profiles.     

Positron Emission Tomography studies with [11C]PBR28 in the Healthy Rodent Brain: Validating SUV as an Outcome Measure of Neuroinflammation

Molecular imaging of the 18 kD Translocator protein (TSPO) with positron emission tomography (PET) is of great value for studying neuroinflammation in rodents longitudinally. Quantification of the TSPO in rodents is, however, quite challenging. There is no suitable reference region and the use of plasma-derived input is not an option for longitudinal studies. The aim of this study was therefore to evaluate the use of the standardized uptake value (SUV) as an outcome measure for TSPO imaging in rodent brain PET studies, using [¹¹C]PBR28. In the first part of the study, healthy male Wistar rats (n = 4) were used to determine the correlation between the distribution volume (V_T, calculated with Logan graphical analysis) and the SUV. In the second part, healthy male Wistar rats (n = 4) and healthy male C57BL/6J mice (n = 4), were used to determine the test-retest variability of the SUV, with a 7-day interval between measurements. Dynamic PET scans of 63 minutes were acquired with a nanoScan PET/MRI and nanoScan PET/CT. An MRI scan was made for anatomical reference with each measurement. The whole brain V_T of [¹¹C]PBR28 in rats was 42.9 ± 1.7. A statistically significant correlation (r² = 0.96; p < 0.01) was found between the V_T and the SUV. The test-retest variability in 8 brain region ranged from 8 to 20% in rats and from 7 to 23% in mice. The interclass correlation coefficient (ICC) was acceptable to excellent for rats, but poor to acceptable for mice. In conclusion: The SUV of [¹¹C]PBR28 showed a high correlation with V_T as well as good test-retest variability. For future longitudinal small animal PET studies the SUV can thus be used to describe [¹¹C]PBR28 uptake in healthy brain tissue. Based on the present observations, further studies are needed to explore the applicability of this approach in small animal disease models, with special regard to neuroinflammatory models.     

Oxidation of regenerated cellulose with NaClO2 catalyzed by TEMPO and NaClO under acid-neutral conditions

A new TEMPO-mediated oxidation with catalytic amounts of TEMPO and NaClO, and NaClO₂ as the primary oxidant under aqueous conditions at pH 3.5–6.8 was used to prepare water-soluble β-(1 → 4)-linked polyglucuronic acid Na salts (cellouronic acids, CUAs) with high molecular weight in good yield. When regenerated cellulose with original degree of polymerization (DP) of 680 was oxidized by the 4-acetamide-TEMPO/NaClO/NaClO₂ system at pH 5.8 and 40 °C for 3 days, CUA with weight average DP (DPw) of 490 was obtained quantitatively. No peaks other than six signals from β-(1 → 4)-linked anhydroglucuronic acid units of CUA were detected in the solution-state ¹³C NMR spectra of the oxidized products. Although the oxidized product prepared under the above conditions contained about 20% unoxidized cellulose particles, the non-CUA fraction was separable from CUAs by filtration or salt precipitation. The DPw values and yields of CUAs after the filtration or salt precipitation treatment were 250–380 and 45–71%, respectively.     

EFFECT OF CARBONIC ANHYDRASE INHIBITORS ON THE INORGANIC CARBON UPTAKE BY PHYTOPLANKTON NATURAL ASSEMBLAGES1

The role of carbonic anhydrase (CA) in inorganic carbon acquisition (dissolved inorganic carbon, DIC) was examined in Alboran Sea phytoplankton assemblages. The study area was characterized by a relatively high variability in nutrient concentration and in abundance and taxonomic composition of phytoplankton. Therefore, the relationship between environmental variability and capacity for using HCO₃^? via external CA (eCA) was examined. Acetazolamide (AZ, an inhibitor of eCA) inhibited the primary productivity (PP) in 50% of the samples, with inhibition percentages ranging from 13% to 60%. The AZ effect was more prominent in the samples that exhibited PP >1 mg C · m^?3 · h^?1, indicating that the contribution of eCA to the DIC photosynthetic flux was irrelevant at low PP. The inhibition of primary productivity by AZ was significantly correlated to the abundance of diatoms. However, there was no a relationship between AZ effect and CO₂ partial pressure (pCO₂) or nutrient concentration, indicating that the variability in the PP percentage supported by eCA was mainly due to differences in taxonomic composition of the phytoplankton assemblages. Ethoxyzolamide (EZ, an inhibitor of both external and internal CA) affected 13 of 14 analyzed samples, with PP inhibition percentages varying from 50% to 95%. The effects of AZ and EZ were partially reversed by doubling DIC concentration. These results imply that CA activity (external and/or internal) was involved in inorganic carbon acquisition in most the samples. However, EZ effect was not correlated with pCO₂ or taxonomic composition of the phytoplankton.