Synthesis of soluble coordination polymer nanoparticles using room-temperature ionic liquid

We report a new family of soluble cyano-bridged coordination polymer nanoparticles M₃[Cr(CN)₆]₂/[BMIM][BF₄] (where M²⁺ = Ni, Mn, V^IVO; BMIM = 1-butyl-3-methylimidazolium). These nanoparticles of ca. 6 nm were synthesised in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, which acts both as a stabilizing agent and a solvent. The magnetic properties of frozen colloids containing the nanoparticles show that the relaxation of magnetisation is strongly influenced by interparticle interactions leading to the appearance of spin-glass-like dynamics in these systems.     

Biodesulfurization of Dibenzothiophene by Microbial Cells Coated with Magnetite Nanoparticles

Microbial cells of Pseudomonas delafieldii were coated with magnetic Fe₃O₄ nanoparticles and then immobilized by external application of a magnetic field. Magnetic Fe₃O₄ nanoparticles were synthesized by a coprecipitation method followed by modification with ammonium oleate. The surface-modified Fe₃O₄ nanoparticles were monodispersed in an aqueous solution and did not precipitate in over 18 months. Using transmission electron microscopy (TEM), the average size of the magnetic particles was found to be in the range from 10 to 15 nm. TEM cross section analysis of the cells showed further that the Fe₃O₄ nanoparticles were for the most part strongly absorbed by the surfaces of the cells and coated the cells. The coated cells had distinct superparamagnetic properties. The magnetization (δ_s) was 8.39 emu · g⁻¹. The coated cells not only had the same desulfurizing activity as free cells but could also be reused more than five times. Compared to cells immobilized on Celite, the cells coated with Fe₃O₄ nanoparticles had greater desulfurizing activity and operational stability.     

Tailoring size and structural distortion of Fe3O4 nanoparticles for the purification of contaminated water

Fe₃O₄ magnetic nanoparticles with different particle sizes were synthesized using two methods, i.e., a co-precipitation process and a polyol process, respectively. The atomic pair distribution analyses from the high-energy X-ray scattering data and TEM observations show that the two kinds of nanoparticles have different sizes and structural distortions. An average particle size of 6–8 nm with a narrow size distribution was observed for the nanoparticles prepared with the co-precipitation method. Magnetic measurements show that those particles are in ferromagnetic state with a saturation magnetization of 74.3 emu g⁻¹. For the particles synthesized with the polyol process, a mean diameter of 18–35 nm was observed with a saturation magnetization of 78.2 emu g⁻¹. Although both kinds of nanoparticles are well crystallized, an obviously higher structural distortion is evidenced for the co-precipitation processed nanoparticles. The synthesized Fe₃O₄ particles with different mean particle size were used for treating the wastewater contaminated with the metal ions, such as Ni(II), Cu(II), Cd(II) and Cr(VI). It is found that the adsorption capacity of Fe₃O₄ particles increased with decreasing the particle size or increasing the surface area. While the particle size was decreased to 8 nm, the Fe₃O₄ particles can absorb almost all of the above-mentioned metal ions in the contaminated water with the adsorption capacity of 34.93 mg/g, which is ∼7 times higher than that using the coarse particles. We attribute the extremely high adsorption capacity to the highly-distorted surface.     

In situ magnetic separation and immobilization of dibenzothiophene-desulfurizing bacteria

In situ cell separation and immobilization of bacterial cells for biodesulfurization were developed by using superparamagnetic Fe₃O₄ nanoparticles (NPs). The Fe₃O₄ NPs were synthesized by coprecipitation followed by modification with ammonium oleate. The surface-modified NPs were monodispersed and the particle size was about 13 nm with 50.8 emu/g saturation magnetization. After adding the magnetic fluids to the culture broth, Rhodococcus erythropolis LSSE8-1 cells were immobilized by adsorption and then separated with an externally magnetic field. The maximum amount of cell mass adsorbed was about 530 g dry cell weight/g particles to LSSE8-1 cells. Analysis showed that the nanoparticles were strongly absorbed to the surface and coated the cells. Compared to free cells, the coated cells not only had the same desulfurizing activity but could also be easily separated from fermentation broth by magnetic force. Based on the adsorption isotherms and Zeta potential analysis, it was believed that oleate-modified Fe₃O₄ NPs adsorbed bacterial cells mainly because of the nano-size effect and hydrophobic interaction.     

Preparation of NiO nanoparticles from metal-organic frameworks via a solid-state decomposition route

This study focuses on the preparation and characterization of single phase NiO nanoparticles. At first, nickel-o-phthalate complexes as precursor were synthesized through semisolid phase reaction method and then NiO nanoparticles were obtained via a solid-state decomposition procedure of layered coordination nickle-o-phthalate complexes formulated as [Ni(pht)(H₂O)₂] and [Ni(pht)₂]. In addition, the effects of calcination temperature and metal-to-ligand ratio on the particle size and morphology of NiO were investigated. Thermogravimetric analysis (TGA) was applied to determine the thermal behavior of complexes. The crystalline structure of products by X-ray diffractometer (XRD), morphology of particles by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were studied. The composition of as-prepared sample was studied by X-ray photoelectron spectroscopy (XPS) spectra. Analysis of FT-IR spectra confirmed the composition of products. The magnetic property was studied with vibrating sample magnetometer (VSM).     

Synthesis of Ag-liposome nano composites

Silver nanoparticles were synthesized and stabilized by a simple, environment-friendly method in a liposomes structure. Liposomes were prepared by facing lecithin to the aqueous-phase solutions while stirring vigorously. The ratio of lecithin concentration to silver nitrate (K_Lec/Ag?=?[Lecithin]/[AgNO₃]) is the influencing factor in the synthesis of silver nanoparticles. The stability, size distribution, and antibacterial properties of synthesized silver nanoparticles were studied by ultraviolet (UV)-visible, dynamic light scattering, and antibacterial assay. The UV spectra indicated a single symmetric extinction peak at 400?nm, confirming the spherical shape of the synthesized silver nanoparticles. A high K_Lec/Ag value leads to a reduction in the intensity of extinction spectra and increases the size of Ag-liposomes nanocomposites. The large Ag-liposomes nanocomposites are transformed to the smaller Ag-liposomes nanocomposites (from 342 to 190?nm) due to sonication treatment. The stabilized silver nanoparticles with various lecithin concentrations showed a good antibacterial activity against Staphylococcus aureus, a Gram-positive bacterium, and Escherichia coli, a Gram-negative bacterium.     

Chemical and biological evaluation of some new antipyrine derivatives with particular properties

Starting from 4-amino-antipyrine, six new compounds were synthesized and characterized. The new compounds contain moieties with particular properties, such are ionophore (benzo-15-crown-5), fluorescent (nitrobenzofurazan), stable free radical (nitroxide), or other types of biological active residues, like nitroderivatives, antipyrine or isoniazid residues. They were fully characterized by appropriate means (¹H and ¹³C NMR, IR, UV–Vis, fluorescence, EPR, elemental analysis) and some of their biological properties were evaluated. Hydrophobicity (R_M0, log P), total antioxidant capacity (TAC), and antimicrobial properties are also presented and discussed.     

Single molecule magnet: Heterodinuclear cyano-bridged cubic cluster [(Tp)8Fe4Ni4(CN)12] (Tp = hydrotris(1-pyrazolyl)borate)

The octanuclear cyano-bridged cluster [(Tp)₈Fe₄Ni₄(CN)₁₂] · H₂O · 24CH₃CN (1) (Tp = hydrotris(1-pyrazolyl)borate) showing magnetic properties of single-molecule magnet has been synthesized by reaction of [fac-Fe(Tp)(CN)₃]⁻ with {(Tp)Ni(NO₃)} species formed from an equimolar reaction mixture of Ni(NO₃)₂ · 6H₂O and KTp in MeCN. The X-ray analysis of 1 shows molecular cube structure in which Fe^III and Ni^II ions reside in alternate corners. The average intramolecular Fe?Ni distance is 5.124 Å. Out-of-phase ac susceptibility and reduce magnetization measurements show that 1 is a single molecule magnet with ground spin state S = 6 and spin reversal energy barrier U = 14 K. Magnetic hysteresis loops were also observed by applying fast sweeping field.     

Nickel(II) complex with a tridentate ONS-Schiff base ligand: X-ray structure,VIS and NIR solution spectra and kinetics of ligand substitution

The ligand N-(3-thia-n-pentyl)salicylaldimine (Hsalen-SEt) and its green nickel(II) complex Ni(salen-SEt)₂ was prepared. The complex crystallizes in the orthorhombic space group Pbca with a a = 2538.3(4) pm, b = 1490.0(3) pm, c = 1163.5(2) pm and Z = 8. The coordination sphere of the nickel is a distorted octahedron with two oxygen atoms in a cis-position, two nitrogen atoms in a trans-position and two sulfur atoms in a cis-position. The two NiO distances were 197.8 and 198.1 pm, the two NiN distances 201.8 and 200.6 pm, whereas the two NiS distances are 272.0 and 266.3 pm. The magnetic susceptibility of Ni(salen-SEt)₂ was measured in the temperature range 2.6-281 K, the magnetic moment being μ_eff=3.02μ_B.The VIS and NIR solution spectra of the complex in different solvents indicate that the two tridentate ONS-ligands are coordinated as bidentate ON-ligands, the coordination geometry being square-planar (trans- N₂O₂) in non-coordinating solvents (e.g., toluene) and octahedral in coordinating solvents (e.g., pyridine), due to addition of two solvent molecules. From spectrophotometric titration the individual complex formation constants for the species Ni(salen-SEt)₂·py (K₁ and Ni(salen-SEt)₂·2py (K₂) were found to be K₁ = 1.76 ± 0.40 M^-1 and K₂ = 145 ± 34 M^-1. The kinetics of the reaction Ni(salen-SEt)₂ + H₂salen → Ni(salen) + 2Hsalen-SEt as studied in acetone by stopped-flow spectrophotometry follow the rate law, rate = (k^S = k_H2^salen H₂salen]) × [Ni(salen-SEt)₂] with k_S = 0.038 ± 0.013 s^-1 and k_H2^salen = 17.2 ± 0.4 M^-1 s^-1 at 25°C. The spectroscopic and kinetic properties of Ni(salen-SEt)₂ are compared with those of bis(N-alkyl-salicylaldiminato)nickel(II) complexes     

Obtaining of new magnetic nanocomposites based on modified polysaccharide

The study presents the preparation of some composite materials with magnetic properties by two different encapsulation methods of magnetite (Fe₃O₄) in a polymer matrix based on carboxymethyl starch-g-polylactic acid (CMS-g-PLA). The copolymer matrix used to obtain the magnetic nanocomposites was synthesized by grafting reaction of carboxymethyl starch (CMS) with d,l-lactic acid (DLLA), in the presence of Sn octanoate [Sn(Oct)₂] as catalyst. Magnetite was obtained by co-precipitation from aqueous salt solutions FeCl₂/FeCl₃ (molar ratio 1/2). The magnetic composites were prepared by precipitation method in acetone (non-solvent) of the DMSO solutions of magnetite and copolymer, and synthesis in situ of the nanocomposites. In the first case, the particle size measured by DLS-technique was 168 nm, and the magnetization was 46.82 emu/g, while after in situ synthesis, the composite materials showed smaller size (141 nm), but the magnetization was reduced (3.04 emu/g). The higher magnetization in the first case is due to the great degree of encapsulation of the magnetite, which was about 43.4 wt.%, compared to 4.37 wt.% for the in situ synthesis (determined by thermogravimetry). The CMS-g-PLA copolymer, magnetite, and the nanocomposites were characterized by infrared spectroscopy (FTIR), near infrared chemical imagistic (NIR-CI), dynamic light scattering (DLS) technique, X-ray diffraction (WAXD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and thermal analyses. Since the polymer matrix and magnetite are biodegradable and biocompatible, the magnetic nanocomposites can be used for conjugation of some drugs. The polymer matrix CMS-g-PLA acts as a shell, and vehicle for the active component, whereas magnetite is the component which makes targeting possible by external magnetic field manipulation.     

Isometric scaling of above- and below-ground biomass at the individual and community levels in the understorey of a sub-tropical forest

Background and Aims Empirical studies and allometric partitioning (AP) theory indicate that plant above-ground biomass (M_A) scales, on average, one-to-one (isometrically) with below-ground biomass (M_R) at the level of individual trees and at the level of entire forest communities. However, the ability of the AP theory to predict the biomass allocation patterns of understorey plants has not been established because most previous empirical tests have focused on canopy tree species or very large shrubs.Methods In order to test the AP theory further, 1586 understorey sub-tropical forest plants from 30 sites in south-east China were harvested and examined. The numerical values of the scaling exponents and normalization constants (i.e. slopes and y-intercepts, respectively) of log–log linear M_A vs. M_R relationships were determined for all individual plants, for each site, across the entire data set, and for data sorted into a total of 19 sub-sets of forest types and successional stages. Similar comparisons of M_A/M_R were also made.Key Results The data revealed that the mean M_A/M_R of understorey plants was 2·44 and 1·57 across all 1586 plants and for all communities, respectively, and M_A scaled nearly isometrically with respect to M_R, with scaling exponents of 1·01 for all individual plants and 0·99 for all communities. The scaling exponents did not differ significantly among different forest types or successional stages, but the normalization constants did, and were positively correlated with M_A/M_R and negatively correlated with scaling exponents across all 1586 plants.Conclusions The results support the AP theory’s prediction that M_A scales nearly one-to-one with M_R (i.e. M_A ∝ M_R ^≈1·0) and that plant biomass partitioning for individual plants and at the community level share a strikingly similar pattern, at least for the understorey plants examined in this study. Furthermore, variation in environmental conditions appears to affect the numerical values of normalization constants, but not the scaling exponents of the M_A vs. M_R relationship. This feature of the results suggests that plant size is the primary driver of the M_A vs. M_R biomass allocation pattern for understorey plants in sub-tropical forests.     

Controlling the thickness of polymeric shell on magnetic nanoparticles loaded with doxorubicin for targeted delivery and MRI contrast agent

The polymeric functionalization of superparamagnetic iron oxides nanoparticles is developed for cancer targeting capability and magnetic resonance imaging. Here the nanoparticles (NP) are decorated through the adsorption of a polymeric layer around the particle surface for the formation of core-shell. The synthesized magnetic nanoparticles (MNPs) are conjugated with fluorescent dye, targeting ligand, and drug molecules for improvement of target specific diagnostic and possible therapeutics applications. In this investigation doxorubicin was loaded into the shell of the MNPs and release study was carried out at different pH. The core-shell structure of magnetic NP coated chitosan matrix was visualized by TEM observation. The cytotoxicity of these magnetic NPs is investigated using MTT assay and receptor mediated internalization by HeLa and NIH3T3 cells are studied by fluorescence microscopy. Moreover, compared with T₂-weighted magnetic resonance imaging (MRI) in the above cells, the synthesized nanoparticles are showed stronger contrast enhancements towards cancer cells.     

The first example of calix[4]pyrrole functionalized vic-dioxime ligand: Synthesis, characterization, spectroscopic studies and redox properties of the mononuclear transition metal complexes

Novel calix[4]pyrrole bearing vic-dioxime ligand (LH₂) of the general formula, R₁R₂C₂N₂O₂H₂ (where, R₁ = C₆H₅- and R₂ = C₃₉H₅₀N₅-) has been synthesized by the reaction of anti-chlorophenylglyoxime with 3-aminophenylcalix[4]pyrrole at room temperature. The mononuclear Cu(II), Ni(II) and Co(II)complexes of this vic-dioxime ligand were prepared and their structures were confirmed by elemental analysis, FT-IR, TGA and magnetic susceptibility measurements; the HMBC, DEPT, ¹H and ¹³C NMR spectra of the LH₂ ligand were also reported. The electrochemical property of the complexes was investigated in DMSO by cyclic voltammetry at 200 mV s⁻¹ scan rate. The cyclic voltammetric measurements clearly indicated that Co(LH)₂·2H₂O complex differs from the Ni(LH)₂ and Cu(LH)₂ complexes upon the exhibition of quasi-reversible one-electron transfer reduction process in the negative region instead of an irreversible process.     

Scaling relationship between tree respiration rates and biomass

The WBE theory proposed by West, Brown and Enquist predicts that larger plant respiration rate, R, scales to the three-quarters power of body size, M. However, studies on the R versus M relationship for larger plants (i.e. trees larger than saplings) have not been reported. Published respiration rates of field-grown trees (saplings and larger trees) were examined to test this relationship. Our results showed that for larger trees, aboveground respiration rates R_A scaled as the 0.82-power of aboveground biomass M_A, and that total respiration rates R_T scaled as the 0.85-power of total biomass M_T, both of which significantly deviated from the three-quarters scaling law predicted by the WBE theory, and which agreed with 0.81–0.84-power scaling of biomass to respiration across the full range of measured tree sizes for an independent dataset reported by Reich et al. (Reich et al. 2006 Nature 439, 457–461). By contrast, R scaled nearly isometrically with M in saplings. We contend that the scaling exponent of plant metabolism is close to unity for saplings and decreases (but is significantly larger than three-quarters) as trees grow, implying that there is no universal metabolic scaling in plants.     

Immobilization and characterization of horseradish peroxidase into chitosan and chitosan/PEG nanoparticles: A comparative study

Chitosan (CS) is considered a suitable biomaterial for enzyme immobilization. CS combination with polyethylene glycol (PEG) can improve the biocompatibility and the properties of the immobilized system. Thus, the present work investigated the effect of the PEG in the horseradish peroxidase (HRP) immobilization into chitosan nanoparticles from the morphological, physicochemical, and biochemical perspectives. CS and CS/PEG nanoparticles were obtained by ionotropic gelation and provided immobilization efficiencies (IE) of 65.8 % and 51.7 % and activity recovery (AR) of 76.4 % and 60.4 %, respectively. The particles were characterized by DLS, ZP, SEM, FTIR, TGA and DSC analysis. Chitosan nanoparticles showed size around 135 nm and increased to 229 nm after PEG addition and HRP immobilization. All particles showed positive surface charges (20−28 mV). Characterizations suggest nanoparticles formation and effective immobilization process. Similar values for optimum temperature and pH for immobilized HRP into both nanoparticles were found (45 °C, 7.0). V_max value decreased by 5.07 to 3.82 and 4.11 mM/min and K_M increased by 17.78 to 18.28 and 19.92 mM for free and immobilized HRP into chitosan and chitosan/PEG nanoparticles, respectively. Another biochemical parameters (K_cat, K_e, and K_α) evaluated showed a slight reduction for the immobilized enzyme in both nanoparticles compared to the free enzyme.     

Heterobimetallic assemblies of Ni(II) complexes with a tetradentate amine ligand and diamagnetic cyanidometallates

Syntheses and crystal structures of nickel(II) complexes containing teta (teta = N,N′-bis(2-aminoethyl)ethane-1,2-diamine) as a tetradentate blocking ligand and cyanidometallic bridging complexes are described. The complexes [Ni(teta)(cis-μ²-Ni(CN)₄)] (1) and [{Ni(teta)}₃(μ⁶-Co(CN)₆)] (ClO₄)₃ (2) exhibit a 1D-polymeric structure whereas the heterometallic trinuclear complex [Ni(teta)(μ¹-Ag(CN)₂)₂] (3) forms a unique network. The weak antiferromagnetic exchange was found in polymeric species 1 and 2 by analyzing the magnetic data with several models in which either only susceptibility was treated or simultaneous fitting of temperature and magnetic field dependences of the magnetization was applied using the finite-size closed ring approach. Moreover, an effect of the zero-field splitting phenomenon (ZFS) was considered for 2 by advanced modeling of magnetic properties for varying axial ZFS parameter/isotropic exchange (D/J) ratios.     

Preparation and pharmacodynamics of low-molecular-weight chitosan nanoparticles containing insulin

Low-molecular-weight chitosan (LMWC) was obtained by enzymatic degradation and ultrafiltration separation. LMWC nanoparticles with LMWC having 20 kDa weight average molecular weight (M_w) were then prepared by solvent evaporation method. The resultant nanoparticles were spherical with a narrow particle size distribution. LMWC nanoparticles loaded with insulin as a model drug were prepared. The average entrapment efficiency of insulin could reach up to 95.54%. The in vitro drug release profiles from the nanoparticles showed an initial burst of release in the first 2 h, followed by zero order release kinetics. In vivo pharmacodynamics of chitosan nanoparticles containing insulin showed that the nanoparticles showed some hypoglycemic activity. Compared with an insulin solution, a relative bioavailability of 0.737 was observed for four times the dosage of insulin in the chitosan nanoparticles after pulmonary administration.     

Photoprocesses and magnetic behavior of photochromic transition metal indoline[phenanthrolinospirooxazine] complexes: Tunable photochromic materials

We have synthesized a series of M(IPSO)₃(BPh₄)₂ complexes consisting of first row transition metals and a photochromic phenanthroline ligand: (M = Mn(II), Fe(II), Co(II), Ni(II), Zn(II), and Cu(II), IPSO = spiro[indole-phenanthrolinoxazine]). The optical properties associated with photochromic behavior were evaluated by determination of the (i) equilibrium constants (K) for the thermal and photostationary states, (ii) rates of photochemical ring-opening and ring-closure, and (iii) rates of thermal ring-closure. The photocolorability values associated with conversion from the colorless spirooxazine to the colored photomerocyanine isomer are greatly enhanced upon metal coordination. Variable temperature magnetic susceptibility experiments suggest deviations from cubic symmetry associated with desymmetrization induced by a dependence of ligand field strength on the photochromic state of IPSO.     

The influence of reaction temperature on biomineralization of ferrihydrite cores in human H-ferritin

Ferritin is not only important for iron storage and detoxification in living organisms, but a multifunctional size-constrained nanoplatform for biomimetic nanoparticles. In order to tailor the biomimetic nanoparticles for future applications, it is essential to investigate the effects of external factors such as temperature on the particle size and structure of reconstituted cores in ferritin. In this study, we systematically investigated the mineral composition, crystallinity, and particle size of human H-ferritin (HuHF) reconstituted at four different temperatures (25, 30, 37, and 42°C) by integrated magnetic and transmission electron microscopy analyses. Our results showed that the particle size of reconstituted ferrihydrite cores (~5 nm) in HuHF was temperature-independent. However, the significant changes of the induced magnetization at 5 T field (M_5T) and remanent magnetization (M_r) at 5 K clearly showed that the crystallinity of reconstituted cores increased with increasing temperature, indicating that the reaction temperature deeply affects the structural order of reconstituted ferrihydrite cores rather than the particle size, and the reconstituted cores become more ordered at higher reaction temperatures. Our findings provide useful insights into biomineralization of ferritin under in vivo fever condition as well as in biomimetic synthesis of nanomaterials using ferritin. Furthermore, the rock magnetic methods should be very useful approaches for characterizing finite ferritin nanoparticles.     

Immobilization of Rhizopus oryzae lipase on magnetic Fe3O4-chitosan beads and its potential in phenolic acids ester synthesis

A novel and simple method was developed for the preparation of magnetic Fe₃O₄ nanoparticles by chemical co-precipitation method and subsequent coating with 3-aminopropyltrimethoxysilane (APTMS) through silanization process. Magnetic Fe₃O₄-chitosan particles were prepared by the suspension cross-linking and covalent technique to be used in the application of magnetic carrier technology. The synthesized immobilization supports were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Using glutaraldehyde as the coupling agent, the lipase from R. oryzae was successfully immobilized onto the functionalized magnetic Fe₃O₄-chitosan beads. The results showed that 86.60% of R. oryzae lipase was bound on the synthesized immobilization support. This immobilized lipase was successfully used for the esterification of phenolic acid which resulted in esterification of phenolic acid in isooctane solvent reaction system for 8 consecutive cycles (totally 384 h), 72.6% of its initial activity was retained, indicating a high stability in pharmaceutical and industrial applications.