Specific residues of the GDP/GTP exchange factor Bud5p are involved in establishment of the cell type-specific budding pattern in yeast

Cells of the budding yeast undergo oriented cell division by choosing a specific site for growth depending on their cell type. Haploid a and alpha cells bud in an axial pattern whereas diploid a/alpha cells bud in a bipolar pattern. The Ras-like GTPase Rsr1p/Bud1p, its GDP-GTP exchange factor Bud5p, and its GTPase-activating protein Bud2p are essential for selecting the proper site for polarized growth in all cell types. Here we showed that specific residues at the N terminus and the C terminus of Bud5p were important for bipolar budding, while some residues were involved in both axial and bipolar budding. These bipolar-specific mutations of BUD5 disrupted proper localization of Bud5p in diploid a/alpha cells without affecting Bud5p localization in haploid alpha cells. In contrast, Bud5p expressed in the bud5 mutants defective in both budding patterns failed to localize in all cell types. Thus, these results identify specific residues of Bud5p that are likely to be involved in direct interaction with spatial landmarks, which recruit Bud5p to the proper bud site. Finally, we found a new start codon of BUD5, which extends the open reading frame to 210 bp upstream of the previously estimated start site, thus encoding a polypeptide of 608 amino acid residues. Bud5p with these additional N-terminal residues interacted with Bud8p, a potential bipolar landmark, suggesting that the N-terminal region is necessary for recognition of the spatial cues.     

Identification of an amphipathic helix important for the formation of ectopic septin spirals and axial budding in yeast axial landmark protein Bud3p

Correct positioning of polarity axis in response to internal or external cues is central to cellular morphogenesis and cell fate determination. In the budding yeast Saccharomyces cerevisiae, Bud3p plays a key role in the axial bud-site selection (axial budding) process in which cells assemble the new bud next to the preceding cell division site. Bud3p is thought to act as a component of a spatial landmark. However, it is not clear how Bud3p interacts with other components of the landmark, such as the septins, to control axial budding. Here, we report that overexpression of Bud3p causes the formation of small septin rings (～1 μm in diameter) and arcs aside from previously reported spiral-like septin structures. Bud3p closely associates with the septins in vivo as Bud3p colocalizes with these aberrant septin structures and forms a complex with two septins, Cdc10p and Cdc11p. The interaction of Bud3p with the septins may involve multiple regions of Bud3p including 1-858, 850-1220, and 1221-1636 a.a. since they all target to the bud neck but exhibit different effects on septin organization when overexpressed. In addition, our study reveals that the axial budding function of Bud3p is mediated by the N-terminal region 1-858. This region shares an amphipathic helix (850-858) crucial for bud neck targeting with the middle portion 850-1103 involved in the formation of ectopic septin spirals and rings. Interestingly, the Dbl-homology domain located in 1-858 is dispensable for axial bud-site selection. Our findings suggest that multiple regions of Bud3p ensure efficient targeting of Bud3p to the bud neck in the assembly of the axial landmark and distinct domains of Bud3p are involved in axial bud-site selection and other cellular processes.     

Rax1, a protein required for the establishment of the bipolar budding pattern in yeast

In Saccharomyces cerevisiae, cell type determines two distinct spatial budding patterns. Haploid cells exhibit an axial pattern, whereas diploid cells exhibit a bipolar pattern. Axl1, a member of the insulin-degrading enzyme (IDE) family, is the key morphological determinant for the haploid axial pattern. Here we identified a novel gene, RAX1, specifically required for the bipolar budding pattern. Loss of RAX1 alters the bipolar pattern of axl1 haploids resulting in reversion to the axial pattern, and also alters the bipolar patterns of bud3 and bud4 haploids. However, bud10 rax1 haploids exhibit a random budding pattern, suggesting Bud10 acts as the key proximal landmark in axial budding. Rax1 is required for the localization of Bud8, the distal bipolar budding landmark. Interestingly, Rax1 contains a C-terminal domain possessing some similarity to insulin-related peptides. Our results suggest that Rax1 is necessary for the establishment of the bipolar budding landmark.     

Sequential and distinct roles of the cadherin domain-containing protein Axl2p in cell polarization in yeast cell cycle

Polarization of cell growth along a defined axis is essential for the generation of cell and tissue polarity. In the budding yeast Saccharomyces cerevisiae, Axl2p plays an essential role in polarity-axis determination, or more specifically, axial budding in MATa or alpha cells. Axl2p is a type I membrane glycoprotein containing four cadherin-like motifs in its extracellular domain. However, it is not known when and how Axl2p functions together with other components of the axial landmark, such as Bud3p and Bud4p, to direct axial budding. Here, we show that the recruitment of Axl2p to the bud neck after S/G2 phase of the cell cycle depends on Bud3p and Bud4p. This recruitment is mediated via an interaction between Bud4p and the central region of the Axl2p cytoplasmic tail. This region of Axl2p, together with its N-terminal region and its transmembrane domain, is sufficient for axial budding. In addition, our work demonstrates a previously unappreciated role for Axl2p. Axl2p interacts with Cdc42p and other polarity-establishment proteins, and it regulates septin organization in late G1 independently of its role in polarity-axis determination. Together, these results suggest that Axl2p plays sequential and distinct roles in the regulation of cellular morphogenesis in yeast cell cycle.     

Asymmetrically localized Bud8p and Bud9p proteins control yeast cell polarity and development

Diploid strains of the budding yeast Saccharomyces cerevisiae change the pattern of cell division from bipolar to unipolar when switching growth from the unicellular yeast form (YF) to filamentous, pseudohyphal (PH) cells in response to nitrogen starvation. The functions of two transmembrane proteins, Bud8p and Bud9p, in regulating YF and PH cell polarity were investigated. Bud8p is highly concentrated at the distal pole of both YF and PH cells, where it directs initiation of cell division. Asymmetric localization of Bud8p is independent of the Rsr1p/Bud1p GTPase. rsr1/bud1 mutations are epistatic to bud8 mutations, placing Rsr1p/Bud1p downstream of Bud8p. In YF cells, Bud9p is also localized at the distal pole, yet deletion of BUD9 favours distal bud initiation. In PH cells, nutritional starvation for nitrogen efficiently prevents distal localization of Bud9p. Because Bud8p and Bud9p proteins associate in vivo, we propose Bud8p as a landmark for bud initiation at the distal cell pole, where Bud9p acts as inhibitor. In response to nitrogen starvation, asymmetric localization of Bud9p is averted, favouring Bud8p-mediated cell division at the distal pole.     

Role of bud6p and tea1p in the interaction between actin and microtubules for the establishment of cell polarity in fission yeast

BACKGROUND: In many cell types, microtubules are thought to direct the spatial distribution of F-actin in cell polarity. Schizosaccharomyces pombe cells exhibit a regulated program of polarized cell growth: after cell division, they grow first in a monopolar manner at the old end, and in G2 phase, initiate growth at the previous cell division site (the new end). The role of microtubule ends in cell polarity is highlighted by the finding that the cell polarity factor, tea1p, is present on microtubule plus ends and cell tips [1]. RESULTS: Here, we characterize S. pombe bud6p/fat1p, a homolog of S. cerevisiae Bud6/Aip3. bud6Delta mutant cells have a specific defect in the efficient initiation of growth at the new end and like tea1Delta cells, form T-shaped cells in a cdc11 background. Bud6-GFP localizes to both cell tips and the cytokinesis ring. Maintenance of cell tip localization is dependent upon actin but not microtubules. Bud6-GFP localization is tea1p dependent, and tea1p localization is not bud6p dependent. tea1Delta and bud6Delta cells generally grow in a monopolar manner but exhibit different growth patterns. tea1(Delta)bud6Delta mutants resemble tea1Delta mutants. Tea1p and bud6p coimmunoprecipitate and comigrate in large complexes. CONCLUSIONS: Our studies show that tea1p (a microtubule end-associated factor) and bud6p (an actin-associated factor) function in a common pathway, with bud6p downstream of tea1p. To our knowledge, bud6p is the first protein shown to interact physically with tea1p. These studies delineate a pathway for how microtubule plus ends function to polarize the actin cytoskeleton through actin-associated polarity factors.     

Subcellular localization of Axl1, the cell type-specific regulator of polarity

Bud-site selection in yeast offers an attractive system for studying cell polarity and asymmetric division. Haploids divide in an axial pattern, whereas diploids divide in a bipolar pattern. AXL1 is expressed in haploids but not diploids, and ectopic expression of AXL1 in diploids converts their bipolar budding pattern to an axial pattern. How Axl1 acts as a switch between the bipolar and axial patterns is not understood. Here we report that Axl1 localizes to the mother-bud neck and division site remnants of haploids. Axl1 is absent from diploids. Axl1 colocalizes with Bud3, Bud4, and Bud10, components of the axial landmark structure. This localization suggests that Axl1 couples the axial landmark with downstream polarity establishment factors. Consistent with such a role, Axl1 associated biochemically with Bud4 and Bud5. Genetic evidence suggests that Axl1 works with Bud3 and Bud4 to promote the activity of the Bud10 membrane protein. Given Axl1's suggested role in morphogenesis and cell fusion during mating, we also examined its localization during this process. Axl1 redistributes independently of the axial landmark to a tight cell surface dot at the tip of each mating projection. These dots are rapidly lost as prezygotes form.     

A myosin light chain mediates the localization of the budding yeast IQGAP-like protein during contractile ring formation

Cytokinesis in animal cells is accomplished through constriction of an actomyosin ring [1] [2] [3], which must assemble at the correct time and place in order to ensure proper division of genetic material and organelles. Budding yeast is a useful model system for determining the biochemical pathway of contractile ring assembly. The budding yeast IQGAP-like protein, Cyk1/Iqg1p, has multiple roles in the assembly and contraction of the actomyosin ring [4] [5] [6]. Previously, the IQ motifs of Cyk1/Iqg1p were shown to be required for the localization of this protein at the bud neck [6]. We have investigated the binding partner of the IQ motifs, which are predicted to interact with calmodulin-like proteins. Mlc1p was originally identified as a light chain for a type V myosin, Myo2p; however, a cytokinesis defect associated with disruption of the MLC1 gene suggested that the essential function of Mlc1p may involve interactions with other proteins [7]. We show that Mlc1p binds the IQ motifs of Cyk1/Iqg1p and present evidence that this interaction recruits Cyk1/Iqg1p to the bud neck. Immunofluorescence staining shows that Mlc1p is localized to sites of polarized cell growth as well as the bud neck before and independently of Cyk1p. These results demonstrate that Mlc1p is important for the assembly of the actomyosin ring in budding yeast and that this function is mediated through interaction with Cyk1/Iqg1p.     

The roles of bud-site-selection proteins during haploid invasive growth in yeast

In haploid strains of Saccharomyces cerevisiae, glucose depletion causes invasive growth, a foraging response that requires a change in budding pattern from axial to unipolar-distal. To begin to address how glucose influences budding pattern in the haploid cell, we examined the roles of bud-site-selection proteins in invasive growth. We found that proteins required for bipolar budding in diploid cells were required for haploid invasive growth. In particular, the Bud8p protein, which marks and directs bud emergence to the distal pole of diploid cells, was localized to the distal pole of haploid cells. In response to glucose limitation, Bud8p was required for the localization of the incipient bud site marker Bud2p to the distal pole. Three of the four known proteins required for axial budding, Bud3p, Bud4p, and Axl2p, were expressed and localized appropriately in glucose-limiting conditions. However, a fourth axial budding determinant, Axl1p, was absent in filamentous cells, and its abundance was controlled by glucose availability and the protein kinase Snf1p. In the bud8 mutant in glucose-limiting conditions, apical growth and bud site selection were uncoupled processes. Finally, we report that diploid cells starved for glucose also initiate the filamentous growth response.     

A localized GTPase exchange factor, Bud5, determines the orientation of division axes in yeast

GTPases are widespread in directing cytoskeletal rearrangements and affecting cellular organization. How they do so is not well understood. Yeast cells divide by budding, which occurs in two spatially programmed patterns, axial or bipolar [1-3]. Cytoskeletal polarization to form a bud is governed by the Ras-like GTPase, Bud1/Rsr1, in response to cortical landmarks. Bud1 is uniformly distributed on the plasma membrane, so presumably its regulators, Bud5 GTPase exchange factor and Bud2 GTPase activating protein, impart spatial specificity to Bud1 action [4]. We examined the localizations of Bud5 and Bud2. Both Bud1 regulators associate with cortical landmarks designating former division sites. In haploids, Bud5 forms double rings that encircle the mother-bud neck and split upon cytokinesis so that each progeny cell inherits Bud5 at the axial division remnant. Recruitment of Bud5 into these structures depends on known axial landmark components. In cells undergoing bipolar budding, Bud5 associates with multiple sites, in response to the bipolar landmarks. Like Bud5, Bud2 associates with the axial division remnant, but rather than being inherited, Bud2 transiently associates with the remnant in late G1, before condensing into a patch at the incipient bud site. The relative timing of Bud5 and Bud2 localizations suggests that both regulators contribute to the spatially specific control of Bud1 GTPase.     

Polarized growth controls cell shape and bipolar bud site selection in Saccharomyces cerevisiae

We examined the relationship between polarized growth and division site selection, two fundamental processes important for proper development of eukaryotes. Diploid Saccharomyces cerevisiae cells exhibit an ellipsoidal shape and a specific division pattern (a bipolar budding pattern). We found that the polarity genes SPA2, PEA2, BUD6, and BNI1 participate in a crucial step of bud morphogenesis, apical growth. Deleting these genes results in round cells and diminishes bud elongation in mutants that exhibit pronounced apical growth. Examination of distribution of the polarized secretion marker Sec4 demonstrates that spa2Delta, pea2Delta, bud6Delta, and bni1Delta mutants fail to concentrate Sec4 at the bud tip during apical growth and at the division site during repolarization just prior to cytokinesis. Moreover, cell surface expansion is not confined to the distal tip of the bud in these mutants. In addition, we found that the p21-activated kinase homologue Ste20 is also important for both apical growth and bipolar bud site selection. We further examined how the duration of polarized growth affects bipolar bud site selection by using mutations in cell cycle regulators that control the timing of growth phases. The grr1Delta mutation enhances apical growth by stabilizing G(1) cyclins and increases the distal-pole budding in diploids. Prolonging polarized growth phases by disrupting the G(2)/M cyclin gene CLB2 enhances the accuracy of bud site selection in wild-type, spa2Delta, and ste20Delta cells, whereas shortening the polarized growth phases by deleting SWE1 decreases the fidelity of bipolar budding. This study reports the identification of components required for apical growth and demonstrates the critical role of polarized growth in bipolar bud site selection. We propose that apical growth and repolarization at the site of cytokinesis are crucial for establishing spatial cues used by diploid yeast cells to position division planes.     

The BUD4 protein of yeast, required for axial budding, is localized to the mother/BUD neck in a cell cycle-dependent manner

A and alpha cells of the yeast Saccharomyces cerevisiae exhibit an axial budding pattern, whereas a/alpha diploid cells exhibit a bipolar pattern. Mutations in BUD3, BUD4, and AXL1 cause a and alpha cells to exhibit the bipolar pattern, indicating that these genes are necessary to specify the axial budding pattern (Chant, J., and I. Herskowitz. 1991. Cell. 65:1203-1212; Fujita, A., C. Oka, Y. Arikawa, T. Katagi, A. Tonouchi, S. Kuhara, and Y. Misumi. 1994. Nature (Lond.). 372:567-570). We cloned and sequenced BUD4, which codes for a large, novel protein (Bud4p) with a potential GTP-binding motif. Bud4p is expressed and localized to the mother/bud neck in all cell types. Most mitotic cells contain two apparent rings of Bud4 immunoreactive staining, as observed for Bud3p (Chant, J., M. Mischke, E. Mitchell, I. Herskowitz, and J.R. Pringle. 1995. J. Cell Biol. 129: 767-778). Early G1 cells contain a single ring of Bud4p immunoreactive staining, whereas cells at START and in S phase lack these rings. The level of Bud4p is also regulated in a cell cycle-dependent manner. Bud4p is inefficiently localized in bud3 mutants and after a temperature shift of a temperature-sensitive mutant, cdc12, defective in the neck filaments. These observations suggest that Bud4p and Bud3p cooperate to recognize a spatial landmark (the neck filaments) during mitosis and support the hypothesis that they subsequently become a landmark for establishing the axial budding pattern in G1.     

The Multiple Roles of Cyk1p in the Assembly and Function of the Actomyosin Ring in Budding Yeast

The budding yeast IQGAP-like protein Cyk1p/Iqg1p localizes to the mother-bud junction during anaphase and has been shown to be required for the completion of cytokinesis. In this study, video microscopy analysis of cells expressing green fluorescent protein-tagged Cyk1p/Iqg1p demonstrates that Cyk1p/Iqg1p is a dynamic component of the contractile ring during cytokinesis. Furthermore, in the absence of Cyk1p/Iqg1p, myosin II fails to undergo the contraction-like size change at the end of mitosis. To understand the mechanistic role of Cyk1p/Iqg1p in actomyosin ring assembly and dynamics, we have investigated the role of the structural domains that Cyk1p/Iqg1p shares with IQGAPs. An amino terminal portion containing the calponin homology domain binds to actin filaments and is required for the assembly of actin filaments to the ring. This result supports the hypothesis that Cyk1p/Iqg1p plays a direct role in F-actin recruitment. Deletion of the domain harboring the eight IQ motifs abolishes the localization of Cyk1p/Iqg1p to the bud neck, suggesting that Cyk1p/Iqg1p may be localized through interactions with a calmodulin-like protein. Interestingly, deletion of the COOH-terminal GTPase-activating protein-related domain does not affect Cyk1p/Iqg1p localization or actin recruitment to the ring but prevents actomyosin ring contraction. In vitro binding experiments show that Cyk1p/Iqg1p binds to calmodulin, Cmd1p, in a calcium-dependent manner, and to Tem1p, a small GTP-binding protein previously found to be required for the completion of anaphase. These results demonstrate the critical function of Cyk1p/Iqg1p in regulating various steps of actomyosin ring assembly and cytokinesis.     

O-Glycosylation of Axl2/Bud10p by Pmt4p is required for its stability, localization, and function in daughter cells.

Cells of the yeast Saccharomyces cerevisiae choose bud sites in a manner that is dependent upon cell type: a and alpha cells select axial sites; a/alpha cells utilize bipolar sites. Mutants specifically defective in axial budding were isolated from an alpha strain using pseudohyphal growth as an assay. We found that a and alpha mutants defective in the previously identified PMT4 gene exhibit unipolar, rather than axial budding: mother cells choose axial bud sites, but daughter cells do not. PMT4 encodes a protein mannosyl transferase (pmt) required for O-linked glycosylation of some secretory and cell surface proteins (Immervoll, T., M. Gentzsch, and W. Tanner. 1995. Yeast. 11:1345-1351). We demonstrate that Axl2/Bud10p, which is required for the axial budding pattern, is an O-linked glycoprotein and is incompletely glycosylated, unstable, and mislocalized in cells lacking PMT4. Overexpression of AXL2 can partially restore proper bud-site selection to pmt4 mutants. These data indicate that Axl2/Bud10p is glycosylated by Pmt4p and that O-linked glycosylation increases Axl2/ Bud10p activity in daughter cells, apparently by enhancing its stability and promoting its localization to the plasma membrane.     

Identification of yeast IQGAP (Iqg1p) as an anaphase-promoting-complex substrate and its role in actomyosin-ring-independent cytokinesis

In the yeast Saccharomyces cerevisiae, a ring of myosin II forms in a septin-dependent manner at the budding site in late G1. This ring remains at the bud neck until the onset of cytokinesis, when actin is recruited to it. The actomyosin ring then contracts, septum formation occurs concurrently, and cytokinesis is soon completed. Deletion of MYO1 (the only myosin II gene) is lethal on rich medium in the W303 strain background and causes slow-growth and delayed-cell-separation phenotypes in the S288C strain background. These phenotypes can be suppressed by deletions of genes encoding nonessential components of the anaphase-promoting complex (APC/C). This suppression does not seem to result simply from a delay in mitotic exit, because overexpression of a nondegradable mitotic cyclin does not suppress the same phenotypes. Overexpression of either IQG1 or CYK3 also suppresses the myo1Delta phenotypes, and Iqg1p (an IQGAP protein) is increased in abundance and abnormally persistent after cytokinesis in APC/C mutants. In vitro assays showed that Iqg1p is ubiquitinated directly by APC/C(Cdh1) via a novel recognition sequence. A nondegradable Iqg1p (lacking this recognition sequence) can suppress the myo1Delta phenotypes even when expressed at relatively low levels. Together, the data suggest that compromise of APC/C function allows the accumulation of Iqg1p, which then promotes actomyosin-ring-independent cytokinesis at least in part by activation of Cyk3p.     

Role of Bud3p in producing the axial budding pattern of yeast

Yeast cells can select bud sites in either of two distinct spatial patterns. a cells and alpha cells typically bud in an axial pattern, in which both mother and daughter cells form new buds adjacent to the preceding division site. In contrast, a/alpha cells typically bud in a bipolar pattern, in which new buds can form at either pole of the cell. The BUD3 gene is specifically required for the axial pattern of budding: mutations of BUD3 (including a deletion) affect the axial pattern but not the bipolar pattern. The sequence of BUD3 predicts a product (Bud3p) of 1635 amino acids with no strong or instructive similarities to previously known proteins. However, immunofluorescence localization of Bud3p has revealed that it assembles in an apparent double ring encircling the mother-bud neck shortly after the mitotic spindle forms. The Bud3p structure at the neck persists until cytokinesis, when it splits to yield a single ring of Bud3p marking the division site on each of the two progeny cells. These single rings remain for much of the ensuing unbudded phase and then disassemble. The Bud3p rings are indistinguishable from those of the neck filament- associated proteins (Cdc3p, Cdc10p, Cdc11p, and Cdc12p), except that the latter proteins assemble before bud emergence and remain in place for the duration of the cell cycle. Upon shift of a temperature- sensitive cdc12 mutant to restrictive temperature, localization of both Bud3p and the neck filament-associated proteins is rapidly lost. In addition, a haploid cdc11 mutant loses its axial-budding pattern upon shift to restrictive temperature. Taken together, the data suggest that Bud3p and the neck filaments are linked in a cycle in which each controls the position of the other's assembly: Bud3p assembles onto the neck filaments in one cell cycle to mark the site for axial budding (including assembly of the new ring of neck filaments) in the next cell cycle. As the expression and localization of Bud3p are similar in a, alpha, and a/alpha cells, additional regulation must exist such that Bud3p restricts the position of bud formation in a and alpha cells but not in a/alpha cells.     

The Anillin-Related Region of Bud4 Is the Major Functional Determinant for Bud4's Function in Septin Organization during Bud Growth and Axial Bud Site Selection in Budding Yeast

The anillin-related protein Bud4 of Saccharomyces cerevisiae is required for axial bud site selection by linking the axial landmark to the septins, which localize at the mother bud neck. Recent studies indicate that Bud4 plays a role in septin organization during cytokinesis. Here we show that Bud4 is also involved in septin organization during bud growth prior to cytokinesis, as bud4Δ shs1Δ cells displayed an elongated bud morphology and defective septin organization at 18°C. Bud4 overexpression also affected septin organization during bud growth in shs1Δ cells at 30°C. Bud4 was previously thought to associate with the septins via its central region, while the C-terminal anillin-related region was not involved in septin association. Surprisingly, we found that the central region of Bud4 alone targets to the bud neck throughout the cell cycle, unlike full-length Bud4, which localizes to the bud neck only during G₂/M phase. We identified the anillin-related region to be a second targeting domain that cooperates with the central region for proper septin association. In addition, the anillin-related region could largely mediate Bud4''s function in septin organization during bud growth and bud site selection. We show that this region interacts with the C terminus of Bud3 and the two segments depend on each other for association with the septins. Moreover, like the bud4Δ mutant, the bud3Δ mutant genetically interacts with shs1Δ and cdc12-6 mutants in septin organization, suggesting that Bud4 and Bud3 may cooperate in septin organization during bud growth. These observations provide new insights into the interaction of Bud4 with the septins and Bud3.     

Bud6 directs sequential microtubule interactions with the bud tip and bud neck during spindle morphogenesis in Saccharomyces cerevisiae

In budding yeast, spindle polarity relies on a precise temporal program of cytoplasmic microtubule-cortex interactions throughout spindle assembly. Loss of Clb5-dependent kinase activity under conditions of attenuated Cdc28 function disrupts this program, resulting in diploid-specific lethality. Here we show that polarity loss is tolerated by haploids due to a more prominent contribution of microtubule-neck interactions to spindle orientation inherent to haploids. These differences are mediated by the relative partition of Bud6 between the bud tip and bud neck, distinguishing haploids from diploids. Bud6 localizes initially to the bud tip and accumulates at the neck concomitant with spindle assembly. bud6Delta mutant phenotypes are consistent with Bud6's role as a cortical cue for cytoplasmic microtubule capture. Moreover, mutations that affect Bud6 localization and partitioning disrupt the sequential program of microtubule-cortex interactions accordingly. These data support a model whereby Bud6 sequentially cues microtubule capture events at the bud tip followed by capture events at the bud neck, necessary for correct spindle morphogenesis and polarity.     

Interaction between a Ras and a Rho GTPase couples selection of a growth site to the development of cell polarity in yeast

Polarized cell growth requires the coupling of a defined spatial site on the cell cortex to the apparatus that directs the establishment of cell polarity. In the budding yeast Saccharomyces cerevisiae, the Ras-family GTPase Rsr1p/Bud1p and its regulators select the proper site for bud emergence on the cell cortex. The Rho-family GTPase Cdc42p and its associated proteins then establish an axis of polarized growth by triggering an asymmetric organization of the actin cytoskeleton and secretory apparatus at the selected bud site. We explored whether a direct linkage exists between the Rsr1p/Bud1p and Cdc42p GTPases. Here we show specific genetic interactions between RSR1/BUD1 and particular cdc42 mutants defective in polarity establishment. We also show that Cdc42p coimmunoprecipitated with Rsr1p/Bud1p from yeast extracts. In vitro studies indicated a direct interaction between Rsr1p/Bud1p and Cdc42p, which was enhanced by Cdc24p, a guanine nucleotide exchange factor for Cdc42p. Our findings suggest that Cdc42p interacts directly with Rsr1p/Bud1p in vivo, providing a novel mechanism by which direct contact between a Ras-family GTPase and a Rho-family GTPase links the selection of a growth site to polarity establishment.     

Polarization of Diploid Daughter Cells Directed by Spatial Cues and GTP Hydrolysis of Cdc42 in Budding Yeast

Cell polarization occurs along a single axis that is generally determined by a spatial cue. Cells of the budding yeast exhibit a characteristic pattern of budding, which depends on cell-type-specific cortical markers, reflecting a genetic programming for the site of cell polarization. The Cdc42 GTPase plays a key role in cell polarization in various cell types. Although previous studies in budding yeast suggested positive feedback loops whereby Cdc42 becomes polarized, these mechanisms do not include spatial cues, neglecting the normal patterns of budding. Here we combine live-cell imaging and mathematical modeling to understand how diploid daughter cells establish polarity preferentially at the pole distal to the previous division site. Live-cell imaging shows that daughter cells of diploids exhibit dynamic polarization of Cdc42-GTP, which localizes to the bud tip until the M phase, to the division site at cytokinesis, and then to the distal pole in the next G1 phase. The strong bias toward distal budding of daughter cells requires the distal-pole tag Bud8 and Rga1, a GTPase activating protein for Cdc42, which inhibits budding at the cytokinesis site. Unexpectedly, we also find that over 50% of daughter cells lacking Rga1 exhibit persistent Cdc42-GTP polarization at the bud tip and the distal pole, revealing an additional role of Rga1 in spatiotemporal regulation of Cdc42 and thus in the pattern of polarized growth. Mathematical modeling indeed reveals robust Cdc42-GTP clustering at the distal pole in diploid daughter cells despite random perturbation of the landmark cues. Moreover, modeling predicts different dynamics of Cdc42-GTP polarization when the landmark level and the initial level of Cdc42-GTP at the division site are perturbed by noise added in the model.