Diversity of mineral cell coverings and their formation processes: a review focused on the siliceous cell coverings

Mineral cell coverings are found in various protists. Some macroalgae accumulate calcium carbonate in the intercellular space, and some unicellular organisms use calcium carbonate or silica for the construction of loricas, scales, and frustules. Diatoms are representatives of those utilizing silica for the material of the cell covering called a frustule. The development of the frustule is initiated in a silica-deposition vesicle (SDV), which occurs just beneath the plasma membrane and, subsequently, the silicified cell covering expands its area, following the expansion of the SDV from valve face to valve mantle. Sequential valve development with whole valves is reviewed in several diatoms placed in different phylogenetic positions. Every diatom commences its valve formation from its pattern center and then develops by means of individual procedures. The results indicate that the valve development reflects the phylogeny of diatoms. In addition, recent progress in silica biomineralization is briefly reviewed, and the phylogeny of ability concerning siliceous cell covering formation is inferred. Electronic Publication     

Frustule morphogenesis of raphid pennate diatom <Emphasis Type="Italic">Encyonema ventricosum</Emphasis> (Agardh) Grunow

Diatoms stand out among other microalgae due to the high diversity of species-specific silica frustules whose components (valves and girdle bands) are formed within the cell in special organelles called silica deposition vesicles (SDVs). Research on cell structure and morphogenesis of frustule elements in diatoms of different taxonomic groups has been carried out since the 1950s but is still relevant today. Here, cytological features and valve morphogenesis in the freshwater raphid pennate diatom Encyonema ventricosum (Agardh) Grunow have been studied using light and transmission electron microscopy of cleaned frustules and ultrathin sections of cells, and scanning electron and atomic force microscopy of the frustule surface. Data have been obtained on chloroplast structure: the pyrenoid is spherical, penetrated by a lamella (a stack of two thylakoids); the girdle lamella consists of several short lamellae. The basic stages of frustule morphogenesis characteristic of raphid pennate diatoms have been traced, with the presence of cytoskeletal elements near SDVs being observed throughout this process. Degradation of the plasmalemma and silicalemma is shown to take place when the newly formed valve is released into the space between sister cells. The role of vesicular transport and exocytosis in the gliding of pennate diatoms is discussed.     

The fascinating diatom frustule—can it play a role for attenuation of UV radiation?

Diatoms are ubiquitous organisms in aquatic environments and are estimated to be responsible for 20–25 % of the total global primary production. A unique feature of diatoms is the silica wall, called the frustule. The frustule is characterized by species-specific intricate nanopatterning in the same size range as wavelengths of visible and ultraviolet (UV) light. This has prompted research into the possible role of the frustule in mediating light for the diatoms’ photosynthesis as well as into possible photonic applications of the diatom frustule. One of the possible biological roles, as well as area of potential application, is UV protection. In this review, we explore the possible adaptive value of the silica frustule with focus on research on the effect of UV radiation on diatoms. We also explore the possible effect of the frustules on UV radiation, from a theoretical, biological, and applied perspective, including recent experimental data on UV transmission of diatom frustules.     

Silicon nanotechnologies of pigmented heterokonts

Many pigmented heterokonts are able to synthesize elements of their cell walls (the frustules) of dense biogenic silica. These include diatom algae, which occupy a significant place in the biosphere. The siliceous frustules of diatoms have species-specific patterns of surface structures between 10 and a few hundred nanometers. The present review considers possible mechanisms of uptake of silicic acid from the aquatic environment, its transport across the plasmalemma, and intracellular transport and deposition of silica inside the specialized Silica Deposition Vesicle (SDV) where elements of the new frustule are formed. It is proposed that a complex of silicic acid with positively charged proteins silaffins and polypropylamines remains a homogeneous solution during the intracellular transport to SDV, where biogenic silica precipitates. The high density of the deposited biogenic silica may be due to removal of water from the SDV by aquaporins followed by syneresis--a process during which pore water is expelled from the network of the contracting gel. The pattern of aquaporins in the silicalemma, the membrane embracing the SDV, can determine the pattern of species-specific siliceous nanostructures.     

硅藻纳米技术

硅藻是一类微小的单细胞藻类,具有由无定形氧化硅组成的坚硬细胞壁(硅壳).硅壳具有精致的形态和结构,且随硅藻种类和生长条件不同而千变万化.目前估算的硅藻种类超过200 000种,其独特的纳米结构对光子结构、化学生物传感器、新纳米材料和器件的开发具有启发意义.同时硅藻形态形成学和分子生物学的研究,可以推动硅质材料的仿生合成...     

Beyond micromachining: the potential of diatoms.

Diatoms are microscopic, single-celled algae that possess rigid cell walls (frustules) composed of amorphous silica. Depending on the species of diatom and the growth conditions, these frustules can display a wide range of different morphologies. It is possible to design and produce specific frustule morphologies that have potential applications in nanotechnology.     

Novel fluorescent dyes based on oligopropylamines for the in vivo staining of eukaryotic unicellular algae

Weakly basic fluorescent dyes are used to visualize organelles within live cells due to their affinity to acidic subcellular organelles. In particular, they are used to stain the silica deposited in the silica deposition vesicles (SDVs) of diatoms during the course of their frustule synthesis. This study involved the synthesis of fluorescent dyes derived from oligopropylamines, compounds similar to those found in diatoms. The dyes were obtained by reacting oligopropylamines with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole. The reaction was realized using methylated oligopropylamines with two or three nitrogen atoms and yielded two novel fluorescent dyes: NBD-N2 and NBD-N3. The dyes appeared to be highly efficient in the in vivo staining of growing siliceous frustules of diatoms at concentrations at least 10 times lower than those required for staining with HCK-123. NBD-N3 also efficiently stained other subcellular vesicles of eukaryotic unicellular algae. NBD-N2 stained only growing diatom frustules, whereas NBD-N3 also stained various subcellular organelles of different eukaryotic unicellular algae. NBD-N2 and NBD-N3 were not removed from stained diatom frustules by drastic treatments with H₂SO₄ and H₂O₂. Fluorescent silica can also be obtained by its chemical precipitation in the presence of NBD-N2 and NBD-N3.     

MORPHOLOGICAL FLEXIBILITY OF COCCONEIS PLACENTULA (BACILLARIOPHYCEAE) NANOSTRUCTURE TO CHANGING SALINITY LEVELS1

Diatoms possess a silica frustule decorated with unique patterns of nanosize features. Here, we show for the first time from in situ samples that the size of the nanopores present at the surface of the diatom Cocconeis placentula Ehrenb. varies with fluctuating salinity levels. The observed reduction in nanopore size with decreasing salinity agrees with previous laboratory experiments. We also uniquely combined our observations with theoretical considerations to demonstrate that the decrease in the diffusive layer thickness is compensated for by the changes in pore size, which maintain a steady diffusive flux toward the diatom’s cell at different salinities. This process allows diatoms to absorb similar amount of nutrients whatever the salinity and as such to increase their ecological competitiveness in fluctuating environments. These results further suggest that the overall ecological success of diatoms, and their ability to react to environmental changes, may be controlled by the flexibility of the morphological characteristics of their frustules.     

Lorica Production in Choanoflagellates–A Model System for Investigating the Mechanics, Controls and Dynamics of Secretion

BIOMINERALIZATION is the process by which living organisms assemble structures from naturally occurring inorganic compounds. Mineral deposition is common and widespread amongst Protozoa and in most instances the mineralized structures provide skeletal support and protection for softer organic parts [10]. The 2 most common minerals to be deposited by Protozoa are silica and calcium carbonate. Groups of Protozoa that deposit silica, which we are concerned with here, include the diatoms, chrysophytes, choanoflagellates, Radiolar-ia, Heliozoa and testate amoebae [10]. In the majority of silica-depositing protista, silica is taken up from the medium in the form of monomelic orthosilicic acid Si(OH)₄ (soluble reactive silicate) and deposited as amorphous, polymerised biogenic silica or opal within membrane-bounded vesicles known as silica deposition vesicles (SDV). Often biogenic silica is characteristically patterned and ornamented and for most protozoan groups the morphology of silicified parts is of prime taxonomic importance. By far the most extensively studied group of silica-depositing organisms are the diatoms [1, 12, 13]. To date most of our knowledge of silica metabolism in protists has been based on investigations into this group. Diatoms require silica for the production of their frustules. Uptake and deposition of silica occurs within a closely denned portion of the cell cycle, between nuclear division and cell separation. It occupies about ± of the cell cycle and without an adequate supply of silica diatoms are unable to produce new frustule valves with the result that cell division cannot be completed. Diatoms, therefore, have an obligate requirement for silica and without this nutrient they cease to grow [11]. In contrast to diatoms a number of other silica-depositing protistan groups, such as loricate choanoflagellates and certain chrysophytes, have a facultative requirement for silica. In the past decade the ultras true ture, physiology and ecology of loricate choanoflagellates have been extensively studied by a number of different workers [7] and the significance of these studies to our understanding of the mechanisms, controls and dynamics of silica secretion is summarised and discussed here.     

Production and particle characterization of the frustules of Cyclotella cryptica in comparison with siliceous earth

Diatoms are photoautotrophic micro-organisms that use inorganic carbon sources and light in photosynthesis. Diatom frustules were characterized in terms of particle techniques and compared with siliceous earth, i.e. depositions of diatoms that have wide technical applications. To obtain enough biomass for frustule characterization Cyclotella cryptica has been cultivated in a 15 l photobioreactor under controlled conditions. Native diatom frustules are characterized by a 1.5-fold lower density and 80-fold higher specific surface than siliceous earth. Therefore, native diatom frustules provides a material with novel properties which might be interesting for special technical application.     

NANOSTRUCTURE OF THE DIATOM FRUSTULE AS REVEALED BY ATOMIC FORCE AND SCANNING ELECTRON MICROSCOPY

The cell wall (frustule) of the freshwater diatom Pinnularia viridis (Nitzsch) Ehrenberg is composed of an assembly of highly silicified components and associated organic layers. We used atomic force microscopy (AFM) to investigate the nanostructure and relationship between the outermost surface organics and the siliceous frustule components of live diatoms under natural hydrated conditions. Contact mode AFM imaging revealed that the walls were coated in a thick mucilaginous material that was interrupted only in the vicinity of the raphe fissure. Analysis of this mucilage by force mode AFM demonstrated it to be a nonadhesive, soft, and compressible material. Application of greater force to the sample during repeated scanning enabled the mucilage to be swept from the hard underlying siliceous components and piled into columns on either side of the scan area by the scanning action of the tip. The mucilage columns remained intact for several hours without dissolving or settling back onto the cleaned valve surface, thereby revealing a cohesiveness that suggested a degree of cross-linking. The hard silicified surfaces of the diatom frustule appeared to be relatively smooth when living cells were imaged by AFM or when field-emission SEM was used to image chemically cleaned walls. AFM analysis of P. viridis frustules cleaved in cross-section revealed the nanostructure of the valve silica to be composed of a conglomerate of packed silica spheres that were 44.8 ± 0.7 nm in diameter. The silica spheres that comprised the girdle band biosilica were 40.3 ± 0.8 nm in diameter. Analysis of another heavily silicified diatom, Hantzschia amphioxys (Ehrenberg) Grunow, showed that the valve biosilica was composed of packed silica spheres that were 37.1 ± 1.4 nm and that silica particles from the girdle bands were 38.1 ± 0.5 nm. These results showed little variation in the size range of the silica particles within a particular frustule component (valve or girdle band), but there may be differences in particle size between these components within a diatom frustule and significant differences are found between species.     

Dissection of the frustules of the diatom Synedra acus under the action of picosecond impulses of submillimeter laser irradiation

Diatom algae realize highly intriguing processes of biosynthesis of siliceous structures in living cells under moderate conditions. Investigation of diatom physiology is complicated by frustule (siliceous exoskeleton). Frustules consist of valves and girdle bands which are adhered to each other by means of organic substances. Removal of the frustule from the lipid membrane of diatom cells would open new possibilities for study of silicon metabolism in diatoms. We found that submillimeter laser irradiation produced by a free-electron laser causes splitting of diatom frustules without destruction of cell content. This finding opens the way to direct study of diatom cell membrane and to isolation of cell organelles, including silica deposition vesicles. We suppose that the dissection action of the submillimeter irradiation results from unusual ultrasonic waves produced by the short (30–100 ps) but high-power (1 MW) terahertz laser impulses at 5.6 MHz frequency.     

Diatom elemental and morphological changes in response to iron limitation: a brief review with potential paleoceanographic applications

Diatoms are a major group of phytoplankton that account for approximately 40% of the ocean carbon fixation and the vast majority of biogenic silica production through the construction of their cell walls (termed frustules). These frustules accumulate and are partially preserved in the ocean sediments. Diatom growth and nutrient utilization in high‐nitrate, low‐chlorophyll regions of the world’s oceans are mostly regulated by iron availability. Diatoms acclimate to iron limitation by decreasing cell size. The associated increase in surface area‐to‐volume ratio and decrease in diffusive boundary layer thickness may improve nutrient uptake kinetics. In parallel, cellular silicon (Si) contents are elevated in iron‐limited diatoms relative to nitrogen (N) and carbon (C). Variations in degree of silicification and nutritional requirements of iron‐limited diatoms have been hypothesized to account for higher cellular Si and/or lower cellular N and C, respectively. However, in some diatoms, frustule silicification does not significantly change when cells are iron‐limited. Instead, changes in the Si‐containing valve surface area relative to volume within these diatoms is hypothesized to be responsible for the variations in the cellular Si : N and Si : C ratios. In particular, some examined iron‐limited pennate diatoms have reduced widths relative to their lengths (i.e. lower length‐normalized widths, LNW) compared to iron‐replete cells. In the pennate diatom Fragilariopsis kerguelensis, the mean LNWs of valves preserved in sediments throughout the Southern Ocean (a well‐characterized iron‐limited region) is positively correlated with satellite‐derived, climatological net primary productivity in the overlying waters. Because of the specific morphological changes in pennate diatom frustules in response to iron availability, the valve morphometerics (e.g. LNWs) can potentially be used as a diagnostic tool for iron‐limited diatom growth and relative changes in the Si : N (and Si : C) ratios in extant diatom assemblages as well as those preserved in the sediments.     

The effect of bacteria on the solubilization of silica in diatom frustules

P atrick , S heila & H olding , A.J. 1985. The effect of bacteria on the solubilization of silica in diatom frustules. Journal of Applied Bacteriology 59 , 7–16.
Natural bacterial populations in samples of water from Loch Leven and Lough Neagh increased the rate of solubilization of frustule silica from an axenic Cyclotella meneghiniana culture, compared with sterile autolysis, at 25C. In the inoculated cultures 50–60% of the silica was solubilized over a period of 30 d. Bacterial populations in Loch Leven water also enhanced the solubilization of silica from non-axenic cultures of Asterionella formosa, Tabellaria flocculosa, Navicula pellicu-losa and C. meneghiniana , compared with control cultures sterilized with mercuric chloride. Similar results were obtained with Lough Neagh populations incubated with A. formosa . In comparison with untreated cells, the treatment of diatom cells with ultra-sonication did not increase the release of silica. Pure cultures of bacteria from Loch Leven water enhanced the release of silica from non-axenic A. formosa and axenic C. meneghiniana compared with sterile control treatments. The variation in the ability of cultures to solubilize the frustule silica appeared to be related to their potential to produce hydrolytic enzymes. Natural populations of Loch Leven and Lough Neagh water bacteria and certain bacterial cultures caused the diatoms to aggregate, which did not enhance the release of silica.     

The Probable Mechanism for Silicon Capture by Diatom Algae: Assimilation of Polycarbonic Acids with Diatoms—Is Endocytosis a Key Stage in Building of Siliceous Frustules?

Many organisms including unicellular (diatoms, radiolaria, and chrysophytes), higher plants (rice and horsetail) and animals (sponges) use silica as a main part of skeletons. The bioavailable form of silicon is silicic acid and the mechanism of silicic acid penetration into living cells is still an enigma. Macropinocytosis was assumed as a key stage of the silicon capture by diatoms but assimilation of monomeric silicic acid by this way requires enormous amounts of water to be passed through the cell. We hypothesized that silicon can be captured by diatoms via endocytosis in the form of partially condensed silicic acid (oligosilicates) whose formation on the diatom surface was supposed. Oligosilicates are negatively charged nanoparticles and similar to coils of poly(acrylic acid) (PAA). We have synthesized fluorescent tagged PAA as well as several neutral and positively charged polymers. Cultivation of the diatom Ulnaria ferefusiformis in the presence of these polymers showed that only PAA is able to penetrate into siliceous frustules. The presence of PAA in the frustules was confirmed with chromatography and PAA causes various aberrations of the valve morphology. Growth of U. ferefusiformis and two other diatoms in the presence of tri- and tetracarbonic fluorescent tagged acids points to the ability of diatoms to recognize substances that bear four acidic groups and to include them into siliceous frustules. Thus, partial condensation of silicic acid is a plausible first stage of silicon assimilation.     

New insights into the complex architecture of siliceous copepod teeth

Copepods belong to the dominant marine zooplankton taxa and play an important role in particle and energy fluxes of the marine water column. Their mandibular gnathobases possess tooth-like structures, so-called teeth. In species feeding on large proportions of diatoms these teeth often contain silica, which is very probably the result of a coevolution with the siliceous diatom frustules. Detailed knowledge of the morphology and composition of the siliceous teeth is essential for understanding their functioning and their significance in the context of feeding interactions between copepods and diatoms. Based on analyses of the gnathobases of the Antarctic copepod Rhincalanus gigas, the present study clearly shows, for the first time, that the silica in the siliceous teeth features large proportions of crystalline silica that is consistent with the mineral α-cristobalite and is doped with aluminium. The siliceous structures have internal chitinous fibre networks, which are assumed to serve as scaffolds during the silicification process. The compact siliceous teeth of R. gigas are accompanied by structures with large proportions of the elastic protein resilin, likely reducing the mechanical damage of the teeth when the copepods feed on diatoms with very stable frustules. The results indicate that the coevolution with diatom frustules has resulted in gnathobases exhibiting highly sophisticated composite structures.     

Size variations of planktonic Aulacoseira Thwaites (Diatomae) in water and in sediment from Finnish lakes of varying trophic state

We measured siliceous frustules of diatoms belonging to the genus Aulacoseira Thwaites in phytoplankton samples of 33 lakes in Finland, and found some significant relationships between the frustule dimensions and the concentrations of total phosphorous, phosphate phosphorus, total nitrogen and nitrate nitrogen in lake water. The size alterations appeared to be species specific and the studied taxa showed different patterns of morphometic change along the nutrient gradients. Some taxa were clearly smaller in eutrophic and mesotrophic lakes. We also observed size reductions of diatoms in the upper parts of sediment cores from two lakes which have apparently become more nutrient rich during recent decades.      

Influence of bacteria and salinity on diatom biogenic silica dissolution in estuarine systems

Dissolution of diatom biogenic silica (bSiO₂) in estuaries and its control by water salinity and bacteria were investigated using the river euryhaline species Cyclotella meneghiniana as a model. Laboratory-controlled bioassays conducted at different salinities with an estuarine bacteria inoculum showed a faster dissolution of diatom bSiO₂ at the lowest salinity where bacteria were the most abundant. However in another experiment, salinity increase clearly enhanced the dissolution of cleaned frustules (organic matter free). The presence of active bacteria might therefore predominate on the effect of salinity for freshly lysed diatoms whereas salinity might rather control dissolution of organic-matter-free frustule remains. Incubation of cultivated diatoms at different protease concentrations revealed that high proteolytic activities had little effect on bSiO₂ dissolution at a 1-month scale in spite of an efficient removal of organic matter from the frustules. Altogether it is hypothesized that bacterial colonization increases bSiO₂ dissolution by creating a microenvironment at the diatom surface with high ectoproteolytic activity but also via the release of metabolic byproducts since the presence of organic matter seems generally to facilitate diatom bSiO₂ dissolution.     

Purification of biosilica from living diatoms by a two-step acid cleaning and baking method

Due to their sustainability, intact cell walls, availability of pure cultures, and others, living diatoms show a lot of promise for the application in various fields in particular for micro/nano-devices. In order to purify the biosilica structures of diatoms called frustules, a two-step acid cleaning and baking method was employed. By this path, organic matter and inorganic impurities can be removed very effectively. In addition, the highest quality of frustules was achieved when the samples were cleaned in an excess of boiling 10~15 % HCl and subsequently heated to 600 °C at a heating rate of 3 °C min^?1 for 6 h. In our operation, the native frustule morphology was maintained completely, and dry frustules with more than 90 % SiO₂ in weight can be obtained, and furthermore, the surface area of them reached a good value of 48.47 m² g^?1.     

Judging Diatoms by Their Cover: Variability in Local Elasticity of Lithodesmium undulatum Undergoing Cell Division

Unique features of diatoms are their intricate cell covers (frustules) made out of hydrated, amorphous silica. The frustule defines and maintains cell shape and protects cells against grazers and pathogens, yet it must allow for cell expansion during growth and division. Other siliceous structures have also evolved in some chain-forming species as means for holding neighboring cells together. Characterization and quantification of mechanical properties of these structures are crucial for the understanding of the relationship between form and function in diatoms, but thus far only a handful of studies have addressed this issue. We conducted micro-indentation experiments, using atomic force microscopy (AFM), to examine local variations in elastic (Young''s) moduli of cells and linking structures in the marine, chain-forming diatom Lithodesmium undulatum. Using a fluorescent tracer that is incorporated into new cell wall components we tested the hypothesis that new siliceous structures differ in elastic modulus from their older counterparts. Results show that the local elastic modulus is a highly dynamic property. Elastic modulus of stained regions was significantly lower than that of unstained regions, suggesting that newly formed cell wall components are generally softer than the ones inherited from the parent cells. This study provides the first evidence of differentiation in local elastic properties in the course of the cell cycle. Hardening of newly formed regions may involve incorporation of additional, possibly organic, material but further studies are needed to elucidate the processes that regulate mechanical properties of the frustule during the cell cycle.