Purification and Characterization of β-Fructofuranosidase from Aspergillus japonicus TIT-KJ1

A β-fructofuranosidase (EC 3.2.1.26) was purified to homogeneity from Aspergillus japonicus TIT-KJ1. The enyme had an optimum pH for activity of 5.4 and pH stability at 7.0–8.4. The optimum temperature at pH 5.4 was 60°C. The enzyme had a molecular weight of 236,000 with two subunits and an isoelectric point of pH 4.0. The enzyme was inactivated by 5 mM Hg^{2 +} and Ag⁺. The enzyme had a high transfructosylating activity. Treatment of 50% (w/v) sucrose with the enzyme under optimum conditions afforded more than 55% fructooligosaccharides.     

Characterization of an Invertase with pH Tolerance and Truncation of Its N-Terminal to Shift Optimum Activity toward Neutral pH

Most invertases identified to date have optimal activity at acidic pH, and are intolerant to neutral or alkaline environments. Here, an acid invertase named uninv2 is described. Uninv2 contained 586 amino acids, with a 100 amino acids N-terminal domain, a catalytic domain and a C-terminal domain. With sucrose as the substrate, uninv2 activity was optimal at pH 4.5 and at 45°C. Removal of N-terminal domain of uninv2 has shifted the optimum pH to 6.0 while retaining its optimum temperaure at 45°C. Both uninv2 and the truncated enzyme retained highly stable at neutral pH at 37°C, and they were stable at their optimum pH at 4°C for as long as 30 days. These characteristics make them far superior to invertase from Saccharomyces cerevisiae, which is mostly used as industrial enzyme.     

Studies on the growth of a thermotolerant yeast strain,Kluyveromyces marxianus IMB3, on sucrose containing media

A thermotolerant alcohol-producing yeast strain, Kluyveromyces marxianus IMB3 was shown to grow on sucrose (10% [w/v]) containing media at 45 °C. Under such conditions the organism reached stationary phase within 20 hours and yielded ethanol concentrations in the region of 33g/L. During growth on sucrose containing media the organism was found to produce a cell- associated activity capable of hydrolysing sucrose. This activity was shown to have a Km of 5.0mM when sucrose was used as the substrate. In addition the enzyme was shown to have a pH optimum of 5.0 and a temperature optimum of 50–55 °C and under those conditions the enzyme was shown to be relatively thermostable.     

Optimization, production, and partial characterization of an alkalophilic amylase produced by sponge associated marine bacterium Halobacterium salinarum MMD047

An endosymbiont Halobacterium salinarum MMD047, which could produce high yields of amylase, was isolated from marine sponge Fasciospongia cavernosa, collected from the peninsular coast of India. Maximum production of enzyme was obtained in minimal medium supplemented with 1% sucrose. The enzyme was found to be produced constitutively even in the absence of starch. The optimum temperature and pH for the enzyme production was 40°C and 8.0, respectively. The enzyme exhibited maximum activity in pH range of 6∼10 with an optimum pH of 9.0. The enzyme was stable at 40°C and the enzyme activity decreased dramatically above 50°C. Based on the present findings, the enzyme was characterized as relatively heat sensitive and alkalophilic amylase which can be developed for extensive industrial applications.     

Immobilized Sclerotinia sclerotiorum invertase to produce invert sugar syrup from industrial beet molasses by product

The fungus Sclerotinia sclerotiorum produces invertase activity during cultivation on many agroindustrial residues. The molasses induced invertase was purified by DEAE-cellulose chromatography. The molecular mass of the purified enzyme was estimated at 48 kDa. Optimal temperature was determined at 60 °C and thermal stability up to 65 °C. The enzyme was stable between pH 2.0 and 8.0; optimum pH was about 5.5. Apparent K_m and V_max for sucrose were estimated to be respectively 5.8 mM and 0.11 μmol/min. The invertase was activated by β-mercaptoethanol. Free enzyme exhibited 80 % of its original activity after two month’s storage at 4 °C and 50 % after 1 week at 25 °C. In order to investigate an industrial application, the enzyme was immobilized on alginate and examined for invert sugar production by molasses hydrolysis in a continuous bioreactor. The yield of immobilized invertase was about 78 % and the activity yield was 59 %. Interestingly the immobilized enzyme hydrolyzed beet molasses consuming nearly all sucrose. It retained all of its initial activity after being used for 4 cycles and about 65 % at the sixth cycle. Regarding productivity; 20 g/l of molasses by-product gave the best invert sugar production 46.21 g/day/100 g substrate related to optimal sucrose conversion of 41.6 %.     

Production of alkaline protease by an alkaliphilic bacteria isolated from an alkaline soda lake

A new alkaliphilic strain of Microbacterium producing an alkaline protease was isolated from an alkaline soda lake in Ethiopia. High level of protease activity was produced in the presence of glucose and sucrose as carbon sources. The optimum temperature and pH for activity were 65°C and 9.5-11.5 respectively. Above 50°C, Ca²⁺ was required for enzyme activity and stability. At 55 and 60°C it retained 100 and 85% of its original activity respectively after 1 h incubation. The enzyme was stable over the pH range of 5-12. This revised version was published online in November 2006 with corrections to the Cover Date.     

Production and Properties of a Soymilk-clotting Enzyme System from a Microorganism

Some microorganisms, including some bacteria isolated from soil, were found to secrete an extracellular soymilk-clotting enzyme. Among them, strain No. K-295G-7 showed the highest soymilk-clotting activity and stability of the production of the soymilk-clotting enzyme. The enzyme system (culture filtrate) coagulated protein in soymilk, a curd being formed at pH 5.8~6.7 and at 55~75°C. The optimum temperature for the soymilk-clotting activity was 75°C and the enzyme system was stable at temperatures below 50°C down to 35°C. About 80~100% of the original activity remained after 1 hr at pH 5~7 and 35°C.     

Continuous production of fructooligosaccharides using fructosyltransferase immobilized on ion exchange resin

A continuous production of fructooligosaccharides from sucrose was investigated by fructosyltransferase immobilized on a high porous resin, Diaion HPA 25. The optimum pH (5.5) and temperature (55°C) of the enzyme for activity was unaltered by immobilization, and the immobilized enzyme became less sensitive to the pH change. The optimal operation conditions of the immobilized enzyme column for maximizing the productivity were as follows: 600 g/L of sucrose feed concentration, flow rate of superficial space velocity 2.7 h^?1. When the enzyme column was run at 50°C, about 8% loss of the initial activity of immobilized enzyme was observed after 30 days of continuous operation, during which high productivity of 1174 g/L·h was achieved. The kinds of products obtained using the immobilized enzyme were almost the same as those using soluble enzymes or free cells.     

Purification and characterization of cell-associated glucosyltransferase synthesizing insoluble glucan from Streptococcus mutans serotype c

Streptococcus mutans Ingbritt (serotype c) was shown to have a significant amount of cell-associated glucosyltransferase activity which synthesizes water-insoluble glucan from sucrose. The enzyme was extracted from the washed cells with SDS, renatured with Triton X-100, adsorbed to 1,3-alpha-D-glucan gel, and then eluted with SDS. The enzyme preparation was electrophoretically homogeneous, and the specific activity was 7.3 i.u. (mg protein)-1. The enzyme had an Mr of 158,000 as determined by SDS-PAGE, and was a strongly hydrophilic protein, as judged by its amino acid composition. The enzyme gradually aggregated in the absence of SDS. The enzyme had an optimum pH of 6.5 and a Km value of 16.3 mm for sucrose. Activity was stimulated 1.7-fold by dextran T10, but was not stimulated by high concentrations of ammonium sulphate. Below a sodium phosphate buffer concentration of 50 mm, activity was reduced by 75%. This enzyme synthesized an insoluble D-glucan consisting of 76 mol% 1,3-alpha-linked glucose and 24 mol% 1,6-alpha-linked glucose.     

Trehalose 6-phosphate synthase from Selaginella lepidophylla: purification and properties

A protein of 440 kDa with trehalose 6-phosphate synthase activity was purified with only one purification step by immobilized metal affinity chromatography, from fully hydrated Selaginella lepidophylla plants. The enzyme was purified 50-fold with a yield of 89% and a specific activity of 7.05 U/mg protein. This complex showed two additional aggregation states of 660 and 230 kDa. The three complexes contained 50, 67, and 115 kDa polypeptides with pI of 4.83, 4.69, and 4.55. The reaction was highly specific for glucose 6-phosphate and UDP-glucose. The optimum pH was 7.0 and the enzyme was stable from pH 5.0 to 10. The enzyme was activated by low concentrations of Ca2+, Mg2+, K+, and Na+ and by fructose 6-phosphate, fructose, and glucose. Proline had an inhibitory effect, while sucrose and trehalose up to 0.4M did not have any effect on the activity. Neither the substrates nor final product had an inhibitory effect.     

Improving of Catalase Stability Properties by Encapsulation in Alginate/Fe3O4 Magnetic Composite Beads for Enzymatic Removal of H2O2

The aim of this study was enhancing of stability properties of catalase enzyme by encapsulation in alginate/nanomagnetic beads. Amounts of carrier (10–100 mg) and enzyme concentrations (0.25–1.5 mg/mL) were analyzed to optimize immobilization conditions. Also, the optimum temperature (25–50°C), optimum pH (3.0–8.0), kinetic parameters, thermal stability (20–70°C), pH stability (4.0–9.0) operational stability (0–390 min), and reusability were investigated for characterization of the immobilized catalase system. The optimum pH levels of both free and immobilized catalase were 7.0. At the thermal stability studies, the magnetic catalase beads protected 90% activity, while free catalase maintained only 10% activity at 70°C. The thermal profile of magnetic catalase beads was spread over a large area. Similarly, this system indicated the improving of the pH stability. The reusability, which is especially important for industrial applications, was also determined. Thus, the activity analysis was done 50 times in succession. Catalase encapsulated magnetic alginate beads protected 83% activity after 50 cycles.     

Production of extracellular alkaline lipase by a new thermophilicBacillus sp

A thermophilic soil isolate—Bacillus sp. RS-12, grew optimally at 50°C and not below 40°C. Production of an extracellular lipase by this organism was substantially enhanced when the type and concentration of carbon and nitrogen sources and initial pH of the culture medium were consecutively optimized. The lipase production was found to be growth-associated with maximum secretion in the late exponential growth phase,i.e. 15h of incubation. The enzyme activity as high as 0.98 nkat/mL was obtained under optimum conditions. Tween 80 (0.5%) and yeast extract (0.5%) were found to be the best carbon and nitrogen sources inducing maximum enzyme yield with initial pH 8.0 at 50°C. The kinetic characteristics of the crude lipase indicated the highest activity at 50–55°C and pH 8.0. It had a half life of 60, 18 and 15 min at 65, 70 and 75°C, respectively.     

Properties and use of invertase entrapped in fibers

Invertase was entrapped in cellulose triacetate fibers and the properties of the insoluble derivative were studied. Fiber-entrapped invertase was found very stable under operating conditions. For some insoluble preparations a half-life value of 5,300 days was calculated; a sample of invertase fibers, continuously hydrolyzing sucrose, maintained unchanged its activity for five years. The activity displayed by invertase fibers was 15–65% of that of the free enzyme, depending on the amount of entrapped enzyme and on the porosity of the fibers. At very high substrate concentrations the activity of the entrapped invertase approximated to that of the free enzyme. The pH optimum for activity was around 4.5 for the free and entrapped invertase. The native and entrapped enzyme was unstable at temperatures higher than 35°C. The continuous hydrolysis of sucrose using invertase fiber was studied and the potential industrial application of entrapped enzyme is discussed.     

Characterization of a nuclear phosphatidylinositol 4-kinase in carrot suspension culture cells

We have shown previously that a nuclear phosphatidylinositol (PI) 4-kinase activity was present in intact nuclei isolated from carrot suspension culture cells (Daucus carota L.). Here, we further characterized the enzyme activity of the nuclear enzyme. We found that the pH optimum of the nuclear-associated PI kinase varied with assay conditions. The enzyme had a broad pH optimum between 6.5–7.5 in the presence of endogenous substrate. When the substrate was added in the form of phosphatidylinositol/phosphatidylserine (PI/PS) mixed micelles (1 mM PI and 400 μM PS), the enzyme had an optimum of pH 6.5. In comparison, the pH optimum was 7.0 when PI/Triton X-100 mixed micelles (1 mM PI in 0.025 %, v/v final concentration of Triton X-100) were used. The nuclear-associated PI kinase activity increased 5-fold in the presence of low concentrations of Triton X-100 (0.05 to 0.3 %, v/v); however, the activity decreased by 30 % at Triton X-100 concentrations greater than 0.3 % (v/v). Calcium at 10 μM inhibited 100 % of the nuclear-associated enzyme activity. The K_m for ATP was estimated to be between 36 and 40 μM. The nuclear-associated PI kinase activity was inhibited by both 50 μM ADP and 10 μM adenosine. Treatment of intact nuclei with DNase, RNase, phospholipase A₂ and Triton X-100 did not solubilize the enzyme activity. Based on sensitivity to calcium, ADP, detergent, pH optimum and the product analysis, the nuclear-associated PI 4-kinase was compared with previously reported PI kinases from plants, animals and yeast.     

Purification and characterization of a pectin-releasing enzyme produced by Kluyveromyces wickerhamii

A pectin-releasing enzyme produced by Kluyveromyces wickerhamii IFO 1675 (PPase-W) was purified to homogeneity from a culture filtrate by cation-exchange and size-exclusion chromatographies. This enzyme had a molecular weight of 35,000 determined by both size exclusion chromatography and ultracentrifugal analysis, and of 40,000 by SDS-PAGE. It contained 2.4% sugar, and its isoelectric point was at pH 5.2. PPase-W catalyzed the release of highly polymerized pectin from various protopectins, and also showed endopolygalacturonase (endo-PGase) activity. The purified enzyme had optimum PGase activity at about pH 5.2 and 50°C and was stable in the range of pH from 4.0 to 7.0 and up to 50°C. The properties of PPase-W were compared with those of PPase-F from Kluyveromyces fragilis IFO 0288, and some differences were found. Also, some preliminary data dealing with the relationship between enzyme activities (PPase and endo-PGase) and protein structure are discussed.     

Purification and evaluation of the enzymatic properties of a novel fructosyltransferase from Aspergillus oryzae: a potential biocatalyst for the synthesis of sucrose 6-acetate

A novel fructosyltransferase (AoFT) capable of synthesizing sucrose 6-acetate (S6A) from sucrose and glucose 6-acetate has been purified to homogeneity from Aspergillus oryzae ZZ-01. Its molecular mass was ~50 kDa by SDS-PAGE; optimal activity was at 45 °C and it was stable from pH 4.5 to 7.5 with an optimum pH of 6. Mg²⁺, K⁺ (5 mM), propanol, toluene (50 %, v/v), Tween 20 or Triton X-100 (1 %, w/v) increased the transfructosylation activity by 20, 17, 17, 10, 25 and 20 %, respectively. An overall conversion of 32 % was achieved under optimal conditions over 24 h. This is the first report that the purified and characterized the fructosyltransferase from Aspergillus capable of synthesis of S6A from sucrose and glucose 6-acetate.     

Continuous hydrolysis of sucrose by invertase adsorbed in a tubular reactor

Studies were made of invertase adsorption on Amberlite ion exchange resins. Up to 4000 units of adsorbed enzymatic activity (aea) were obtainedper g of IRA 93 resin; for an aea of 1600 units, the maximum ratio of aea over units of soluble enzyme used for adsorption was close to 50%. Nodesorption occurred during extensive washing at 30°C with 0.01M sodiumacetate buffer at pH 5. Progressive desorption of aea from the invertase–IRA 93 complex occurred when buffer molarity and temperature were increased. Desorption differed only slightly when the buffer pH was 3 or 5. Theoptimum pH of aea was 3.2 with IRA 93 resin, and varied between 3.2 and 5.1with other resins, depending on their anionic or cationic nature. Batch hydrolysis of sucrose by IRA 93–adsorbed invertase followed 1st order kinetics with respect to the substrate concentration, as in the case of soluble invertase. Continuous sucrose hydrolysis with IRA 93–adsorbed invertase was performed in a tubular reactor, and the percent conversion was experimentally determined as a function of the flow rate. The reaction was experimentally determined 50% (w/v) sucrose solution, at pH4 and 30°C; at the selected flow rate, the ratio of sucrose hydrolysis remained constant and close to 76%. This shows that invertase was not desorbed from the tubular reactor. Some continuous hydrolyses were performed with an industrial sucrose solution: enzymatic activity seemed to be stable for anextended period for time (1 month) at 30°C and pH 3 or 4.     

Comparison of proteolytic activities of the enzyme complex from mammalian pancreas and pancreatin

The proteolytic activity and thermal stability of the enzyme complex of a cell suspension from pig and bovine pancreas glands was compared with those of pancreatin. The enzyme complex displayed the highest thermal stability and activity at 50°C. The kinetic constants, energies of activation and inactivation of the enzyme complex, and pH optimum (7.0 ± 0.1) at which this complex had the maximum proteolytic activity were determined. Pancreatin had a pH optimum of 8.0 ±0.1.     

Biochemical characterization and evaluation of invertases produced from Saccharomyces cerevisiae CAT-1 and Rhodotorula mucilaginosa for the production of fructooligosaccharides

Abstract

Invertases are used for several purposes; one among these is the production of fructooligosaccharides. The aim of this study was to biochemically characterize invertase from industrial Saccharomyces cerevisiae CAT-1 and Rhodotorula mucilaginosa isolated from Cerrado soil. The optimum pH and temperature were 4.0 and 70?°C for Rhodotorula mucilaginosa invertase and 4.5 and 50?°C for Saccharomyces cerevisiae invertase. The pH and thermal stability from 3.0 to 10.5 and 75?°C for R. mucilaginosa invertase, respectively. The pH and thermal stability for S. cerevisiae CAT-1 invertase from 3.0 to 7.0, and 50?°C, respectively. Both enzymes showed good catalytic activity with 10% of ethanol in reaction mixture. The hydrolysis by invertases occurs predominantly when sucrose concentrations are ≤5%. On the other hand, the increase in the concentration of sucrose to levels above 10% results in the highest transferase activity, reaching about 13.3?g/L of nystose by S. cerevisiae invertase and 12.6?g/L by R. mucilaginosa invertase. The results demonstrate the high structural stability of the enzyme produced by R. mucilaginosa, which is an extremely interesting feature that would enable the application of this enzyme in industrial processes.     

Production and Properties of Alkaline Dextranase from a Newly Isolated Brevibacterium

About 500 strains of dextranase producing microorganisms were examined in detail for pH- activity and enzyme stability. A gram positive bacterium identified as belonging to the genus Brevibacterium was found to produce alkaline dextranase. Maximal dextranase synthesis was obtained when grown aerobically at 26°C for 3 days in a medium containing 1 % dextran, 2% ethanol, 1 % polypeptone and 0.05 % yeast extract together with trace amounts of inorganic salts.

Brevibacterium dextranase had an optimum pH of 8.0 for activity at 37°C and an optimal temperature at 53°C at pH 7.5. The enzyme was quite stable over the range of pH 5.0 to 10.5 on 24 hr incubation at 37°C, especially on alkaline pH. The enzyme was also heat stable at 60°C for 10 min.