Plastid marker gene excision by the phiC31 phage site-specific recombinase

Marker genes are essential for selective amplification of rare transformed plastid genome copies to obtain genetically stable transplastomic plants. However, the marker gene becomes dispensable when homoplastomic plants are obtained. Here we report excision of plastid marker genes by the phiC31 phage site-specific integrase (Int) that mediates recombination between bacterial (attB) and phage (attP) attachment sites. We tested marker gene excision in a two-step process. First we transformed the tobacco plastid genome with the pCK2 vector in which the spectinomycin resistance (aadA) marker gene is flanked with suitably oriented attB and attP sites. The transformed plastid genomes were stable in the absence of Int. We then transformed the nucleus with a gene encoding a plastid-targeted Int that led to efficient marker gene excision. The aadA marker free Nt-pCK2-Int plants were resistant to phosphinothricin herbicides since the pCK2 plastid vector also carried a bar herbicide resistance gene that, due to the choice of its promoter, causes a yellowish-golden (aurea) phenotype. Int-mediated marker excision reported here is an alternative to the currently used CRE/loxP plastid marker excision system and expands the repertoire of the tools available for the manipulation of the plastid genome.     

Gene activation in plastids by the CRE site-specific recombinase

We developed a novel system for gene activation in plastids that uses the CRE/loxP site-specific recombination system to create a translatable reading frame by excision of a blocking sequence. To test the system, we introduced an inactive gfp* gene into the tobacco plastid genome downstream of the selectable spectinomcyin resistance (aadA) marker gene. The aadA gene is the blocking sequence, and is flanked by directly oriented loxP sites for excision by the CRE. In the non-activated state, gfp* is transcribed from the aadA promoter, but the mRNA is not translated due to the lack of an AUG translation initiation codon. Green Fluorescent Protein (GFP) expression is activated by excision of the aadA coding segment to link up the gfp* coding region with the translation initiation codon of aadA. Tobacco plants that carry the inactive gfp* gene do not contain detectable levels of GFP. However, activation of gfp* resulted in GFP accumulation, proving the utility of CRE-induced protein expression in tobacco chloroplasts. The gene activation system described here will be useful to probe plastid gene function and for the production of recombinant proteins in chloroplasts.     

Persistence of unselected transgenic DNA during a plastid transformation and segregation approach to herbicide resistance

The use of a nonlethal selection scheme, most often using the aadA gene that confers resistance to spectinomycin and streptomycin, has been considered critical for recovery of plastid transformation events. In this study, the plastid-lethal markers, glyphosate or phosphinothricin herbicides, were used to develop a selection scheme for plastids that circumvents the need for integration of an antibiotic resistance marker. The effect of selective agents on tobacco (Nicotiana tabacum) mesophyll chloroplasts was first examined by transmission electron microscopy. We found that at concentrations typically used for selection of nuclear transformants, herbicides caused rapid disintegration of plastid membranes, whereas antibiotics had no apparent effect. To overcome this apparent herbicide lethality to plastids, a "transformation segregation" scheme was developed that used two independent transformation vectors for a cotransformation approach and two different selective agents in a phased selection scheme. One transformation vector carried an antibiotic resistance (aadA) marker used for early nonlethal selection, and the other transformation vector carried the herbicide (CP4 or bar) resistance marker for use in a subsequent lethal selection phase. Because the two markers were carried on separate plasmids and were targeted to different locations on the plastid genome, we reasoned that segregation of the two markers in some transplastomic lines could occur. We report here a plastid cotransformation frequency of 50% to 64%, with a high frequency (20%) of these giving rise to transformation segregants containing exclusively the initially nonselected herbicide resistance marker. Our studies indicate a high degree of persistence of unselected transforming DNA, providing useful insights into plastid chromosome dynamics.     

Removal of antibiotic resistance genes from transgenic tobacco plastids

Removal of antibiotic resistance genes from genetically modified (GM) crops removes the risk of their transfer to the environment or gut microbes. Integration of foreign genes into plastid DNA enhances containment in crops that inherit their plastids maternally. Efficient plastid transformation requires the aadA marker gene, which confers resistance to the antibiotics spectinomycin and streptomycin. We have exploited plastid DNA recombination and cytoplasmic sorting to remove aadA from transplastomic tobacco plants. A 4.9 kbp insert, composed of aadA flanked by bar and uidA genes, was integrated into plastid DNA and selected to remove wild-type plastid genomes. The bar gene confers tolerance to the herbicide glufosinate despite being GC-rich. Excision of aadA and uidA mediated by two 174 bp direct repeats generated aadA-free T(0) transplastomic plants containing the bar gene. Removal of aadA and bar by three 418 bp direct repeats allowed the isolation of marker-free T(2) plants containing a plastid-located uidA reporter gene.     

A guide to choosing vectors for transformation of the plastid genome of higher plants

Plastid transformation, originally developed in tobacco (Nicotiana tabacum), has recently been extended to a number of crop species enabling in vivo probing of plastid function and biotechnological applications. In this article we report new plastid vectors that enable insertion of transgenes in the inverted repeat region of the plastome between the trnV and 3'rps12 or trnI and trnA genes. Efficient recovery of transplastomic clones is ensured by selection for spectinomycin (aadA) or kanamycin (neo) resistance genes. Expression of marker genes can be verified using commercial antibodies that detect the accumulation of neomycin phosphotranseferase II, the neo gene product, or the C-terminal c-myc tag of aminoglycoside-3'-adenylytransferase, encoded by the aadA gene. Aminoglycoside-3'-adenylytransferase, the spectinomycin inactivating enzyme, is translationally fused with green fluorescent protein in two vectors so that transplastomic clones can be selected by spectinomycin resistance and visually identified by fluorescence in ultraviolet light. The marker genes in the new vectors are flanked by target sites for Cre or Int, the P1 and phiC31 phage site-specific recombinases. When uniform transformation of all plastid genomes is obtained, the marker genes can be excised by Cre or Int expressed from a nuclear gene. Choice of expression signals for the gene of interest, complications caused by the presence of plastid DNA sequences recognized by Cre, and loss of transgenes by homologous recombination via duplicated sequences are also discussed to facilitate a rational choice from among the existing vectors and to aid with new target-specific vector designs.     

苏云金芽孢杆菌(Bt)晶体毒蛋白基因在烟草叶绿体中的表达

将全长３．５ｋｂ的Ｂｔ基因３’端缺失,得到长为２．１ｋｂ、１．８ｋｂ的基因。分别将这３个长度（１．８ｋｂ、２．１ｋｂ、３．５ｋｂ）的基因置于水稻叶绿体ｐｓｂＡ基因的启动子和终止子调控之下,并与选择标记基因ａａｄＡ（编码氨基糖苷－３’－腺苷酸转移酶,具壮观霉素抗性）表达盒相连;以烟草叶绿体基因ｔｒｎＨ－ｐｓｂＡ－ｔｒｎＫ为同源片段,构建成叶绿体转化载体ｐＢＴ３、ｐＢＴ８和ｐＢＴ２２。用基因枪把Ｂｔ基     

Transfer of transformed chloroplasts from Nicotiana tabacum to the Lycium barbarum plants

Plastid transformation is an attractive technology for obtaining crop plants with new useful characteristics and for fundamental researches of plastid functioning and nuclear-plastid interaction. The aim of our experiments was to obtain plants with Lycium barbarum nucleus and transformed Nicotiana tabacum plastids. Plastome of previously engineered transplastomic tobacco plants contains reporter uidA gene and selective aadA gene that confers resistance to antibiotics spectinomycin and streptomycin. Asymmetric somatic hybridization was performed for transferring transformed tobacco plastids from transplastomic tobacco plants into recipient L. barbarum wild type plants. Hybrid L. barbarum plants containing transformed tobacco plastome with active aadA and uidA genes were obtained as a result of the experiments. The work shows the possibility of obtaining transplastomic plants by transferring the transformed plastids to remote species by using somatic hybridization technology. The developed technique is especially effective for obtaining transplastomic plants that have low regeneration and transformation ability.     

Construction of marker-free transplastomic tobacco using the Cre-loxP site-specific recombination system

Incorporation of a selectable marker gene in the plastid genome is essential to uniformly alter the thousands of genome copies in a tobacco cell. When transformation is accomplished, however, the marker gene becomes undesirable. Here we describe plastid transformation vectors, the method of plastid transformation using tobacco leaves and alternative protocols for marker gene excision with the P1 bacteriophage Cre-loxP site-specific recombination system. Plastid vectors carry a marker gene flanked with directly oriented loxP sites and a gene of interest, which are introduced into plastids by the biolistic process. The transforming DNA integrates into the plastid genome by homologous recombination via plastid targeting sequences. Marker gene excision is accomplished by a plastid-targeted Cre protein expressed from a nuclear gene. Expression may be from an integrated gene introduced by Agrobacterium transformation (Transformation Protocol), by pollination (Pollination Protocol) or from a transient, non-integrated T-DNA (Transient Protocol). Transplastomic plants are obtained in about 3 months, yielding seed after 2 months. The time required to remove the plastid marker and nuclear genes and to obtain seed takes 10-16 months, depending on which protocol is used.     

Next generation synthetic vectors for transformation of the plastid genome of higher plants

Plastid transformation vectors are E. coli plasmids carrying a plastid marker gene for selection, adjacent cloning sites and flanking plastid DNA to target insertions in the plastid genome by homologous recombination. We report here on a family of next generation plastid vectors carrying synthetic DNA vector arms targeting insertions in the rbcL-accD intergenic region of the tobacco (Nicotiana tabacum) plastid genome. The pSS22 plasmid carries only synthetic vector arms from which the undesirable restriction sites have been removed by point mutations. The pSS24 vector carries a c-Myc tagged spectinomycin resistance (aadA) marker gene whereas in vector pSS30 aadA is flanked with loxP sequences for post-transformation marker excision. The synthetic vectors will enable direct manipulation of passenger genes in the transformation vector targeting insertions in the rbcL-accD intergenic region that contains many commonly used restriction sites. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Construction of a tobacco master line to improve Rubisco engineering in chloroplasts

The inability to assemble Rubisco from any photosynthetic eukaryote within Escherichia coli has hampered structure-function studies of higher plant Rubisco. Precise genetic manipulation of the tobacco chloroplast genome (plastome) by homologous recombination has facilitated the successful production of transplastomic lines that have either mutated the Rubisco large subunit (L) gene, rbcL, or replaced it with foreign variants. Here the capacity of a new tobacco transplastomic line, (cm)trL, to augment future Rubisco engineering studies is demonstrated. Initially the rbcL was replaced with the selectable marker gene, aadA, and an artificial codon-modified (cm)rbcM gene that codes for the structurally novel Rubisco dimer (L(2), approximately 100 kDa) from Rhodosprillum rubrum. To obtain (cm)trL, the aadA was excised by transiently introducing a T-DNA encoding CRE recombinase biolistically. Selection using aadA enabled transplantation of mutated and wild-type tobacco Rubisco genes into the (cm)trL plastome with an efficiency that was 3- to 10-fold higher than comparable transformations into wild-type tobacco. Transformants producing the re-introduced form I tobacco Rubisco variants (hexadecamers comprising eight L and eight small subunits, approximately 520 kDa) were identified by non-denaturing PAGE with fully segregated homoplasmic lines (where no L(2) Rubisco was produced) obtained within 6-9 weeks after transformation which enabled their Rubisco kinetics to be quickly examined. Here the usefulness of (cm)trL in more readily examining the production, folding, and assembly capabilities of both mutated tobacco and foreign form I Rubisco subunits in tobacco plastids is discussed, and the feasibility of quickly assessing the kinetic properties of those that functionally assemble is demonstrated.     

Precise excision of plastid DNA by the large serine recombinase Bxb1

Marker genes are essential for the selection and identification of rarely occurring transformation events generated in biotechnology. This includes plastid transformation, which requires that multiple copies of the modified chloroplast genome be present to obtain genetically stable transplastomic plants. However, the marker gene becomes dispensable when homoplastomic plants are obtained. Here, we demonstrate the precise excision of attP‐ and attB‐flanked DNA from the plastid genome mediated by the large serine recombinase Bxb1. We transformed the tobacco plastid genome with the pTCH‐PB vector containing a stuffer fragment of DNA flanked by directly oriented nonhomologous attP and attB recombinase recognition sites. In the absence of the Bxb1 recombinase, the transformed plastid genomes were stable and heritable. Nuclear‐transformed transgenic tobacco plants expressing a plastid‐targeted Bxb1 recombinase were crossed with transplastomic pTCH‐PB plants, and the T₁ hybrids exhibited efficient excision of the target sequence. The Bxb1–att system should prove to be a useful tool for site‐specifically manipulating the plastid genome and generating marker‐free transplastomic plants.     

Small serine recombination systems ParA‐MRS and CinH‐RS2 perform precise excision of plastid DNA

Selectable marker genes (SMGs) are necessary for selection of transgenic plants. However, once stable transformants have been identified, the marker gene is no longer needed. In this study, we demonstrate the use of the small serine recombination systems, ParA‐MRS and CinH‐RS2, to precisely excise a marker gene from the plastid genome of tobacco. Transplastomic plants transformed with the pTCH‐MRS and pTCH‐RS2 vectors, containing the visual reporter gene DsRed flanked by directly oriented MRS and RS2 recognition sites, respectively, were crossed with nuclear‐genome transformed tobacco plants expressing plastid‐targeted ParA and CinH recombinases, respectively. One hundred per cent of both types of F₁ hybrids exhibited excision of the DsRed marker gene. PCR and Southern blot analyses of DNA from F₂ plants showed that approximately 30% (CinH‐RS2) or 40% (ParA‐MRS) had lost the recombinase genes by segregation. The postexcision transformed plastid genomes were stable and the excision events heritable. The ParA‐MRS and CinH‐RS2 recombination systems will be useful tools for site‐specific manipulation of the plastid genome and for generating marker‐free plants, an essential step for reuse of SMG and for addressing concerns about the presence of antibiotic resistance genes in transgenic plants.     

烟草质体多顺反子定点整合表达载体的构建和转化

构建了烟草质体多顺反子定点整合表达载体pLM4(-psaA-Prrn-RBS-man-RBS-gfp-RBS-aadA-psbA3'-psbC-).用基因枪将该载体轰击烟草叶片5次,用添加了壮观霉素的选择分化培养基筛选,获得质体转基因烟草6株.用PCR、激光扫描、Western blot和RFLP等方法检测都证实多顺反子表达盒中的3个基因甘露聚糖酶基因(man)、绿荧光蛋白基因(gfp)、氨基糖苷3'-腺苷酰基转移酶基因(aadA)已整合到烟草质体基因组中,且均得到表达.     

A set of novel Ti plasmid-derived vectors for the production of transgenic plants

Summary We describe in this paper the construction and use of a set of novel Ti plasmid-derived vectors that can be used to produce transgenic plants. These vectors are based on one of two strategies: 1) double recombination into the wild-type Ti plasmid of genetic information flanked by two T-DNA fragments on a wide-host range plasmid; 2) the binary vector strategy. The vector based on the double recombination principle contains a kanamycin resistance gene for use as a plant selectable marker, a polylinker for the insertion of foreign genes, and a nopaline synthase gene. The vector was constructed such that a disarmed T-DNA results from the double recombination event. The binary vector combines several advantageous features including an origin of replication that is stable in Agrobacterium in the absence of selection, six unique sites for insertion of foreign genes, an intact nopaline synthase gene, and a kanamycin resistance marker for selection of transformed plant cells. All of these vectors have been used to produce tobacco plants transformed with a variety of foreign genes.     

Studies on Insect Resistance of Bt Transplastomic Plants and the Phenotype of Their Progenies

Insecticidal protein gene CrylA (c) from Bacillus thuringiensis (Bt toxin gene) was placed under the control of psbA5'- and 3'- regulatory regions of rice (Oryza sativa L. ) chloroplast to construct Bt expression cassette, which was ligated with selectable marker aadA cassette and homology regions of tobacco ( Nicotiana tabacum L. ) chloroplast genome to generate transformation vector pTRS8. Leaves of tobacco plant cv. NC89 were transformed with particle bombardment method, plastid transformants were selected by their resistance to 500 mg/L of spectinomycin. Some transplastomic plants were toxic to the third-instar larvae of Helicoverpa zea, and the growth of the survived insects was remarkably inhibited. Genetic and molecular analyses of T1 and T2 progenies of plants with highly efficient insect resistance showed that Bt toxin gene had been inherited in progenies, and spectinomycin resistance was inherited maternally.