A highly efficient and selective turn‐on fluorescent sensor for Hg2+, Ag+ and Ag nanoparticles based on a coumarin dithioate derivative

Based on chelation‐enhanced fluorescence, a new fluorescent coumarin derivative probe 3(1‐(7‐hydroxy‐4‐methylcoumarin)ethylidene)hydrazinecarbodithioate for Hg²⁺, Ag⁺ and Ag nanoparticles is reported. Fluorescent probe acts as a rapid and highly selective “off–on” fluorescent probe and fluorescence enhancement by factors 5 to12 times was observed upon selective complexation with Hg²⁺, Ag⁺ and Ag nanoparticles. The molar ratio plots indicated the formation of 1:1 complexes between Hg²⁺ and Ag⁺ with the probe. The linear response range covers a concentration range 0.1 × 10^–5–1.9 × 10^–5 mol/L, 0.1 × 10^–5–2.3 × 10^–5 mol/L and 0.146 × 10^–12–2.63 × 10^–12 mol/L for Hg²⁺, Ag⁺ and Ag nanoparticles, respectively. The interference effect of some anions and cations was also tested. Copyright © 2013 John Wiley & Sons, Ltd.     

A ratiometric fluorescent detection of Zn(II) in aqueous solutions using pyrene-appended histidine

A fluorescent chemosensor, Py-His, based on histidine was easily synthesized in solid phase synthesis. Py-His displayed a highly sensitive ratiometric response to Zn(II) with potent binding affinity (K_a = 1.17 × 10¹³ M^?2) in aqueous solutions. The detection limit of Py-His for Zn(II) was calculated as 80.8 nM. Moreover, Py-His distinguished Zn(II) and Hg(II) by different ratiometric response type; the chemosensor showed a more enhanced increase of excimer emission intensity to Zn(II) than Hg(II). Upon addition of Ag(I) and Cu(II), Py-His showed a turn-off response mainly due to the quenching effect of these metal ions. The binding stoichiometry (2:1 or 1:1) of Py-His to target metal ions played a critical role in the fluorescent response type (ratiometric and turn off response) to target metal ions. The role of imidazole group of Py-His for ratiometric detection of Zn(II) was proposed by pH titration experiments.     

A highly selective fluorescent sensor for mercury ion (II) based on azathia-crown ether possessing a dansyl moiety

An intramolecular charge transfer (ICT) fluorescent sensor 1 using a dansyl moiety as the fluorophore and an azathia-crown ether as the receptor was designed, synthesized and characterized. The ions-selective signaling behaviors of the sensor 1 were investigated in CH(3) CN-H(2) O (1:1, v/v) by fluorescence spectroscopy. It exhibited remarkable fluorescence quenching upon addition of Hg(2+), which was attributed to the 1:1 complex formation between 1 and Hg(2+), while other selected metal ions induced basically no spectral changes. The sensor 1 showed a rapid and linear response towards Hg(2+) in the concentration range from 5.0 × 10(-7) to 1.0 × 10(-5) mol L(-1) with the detection limit of 1.0 × 10(-7) mol L(-1). Furthermore, the whole process could be carried out in a wide pH range of 2.0-8.0 and was not disturbed by other metal ions. Thus, the sensor 1 was used for practical determination of Hg(2+) in different water samples with satisfactory results.     

A sugar-aza-crown ether-based fluorescent sensor for Cu and Hg ions

A sugar-aza-crown ether (SAC)-based fluorescent sensor 4 was prepared. It contains a pyrene as the fluorophore and its fluoroionophoric properties toward transition metal ions were investigated. Chemosensor 4 exhibits highly selective recognition toward Cu²⁺ and Hg²⁺ ions among a series of tested metal ions in methanol solution. The association constants for 4*Cu²⁺ and 4*Hg²⁺ in methanol solution were calculated to be 7.4 × 10¹ M⁻¹ and 4.4 × 10³ M⁻¹, respectively. Chemosensor 4 formed complexes with the Cu²⁺ or Hg²⁺ ion at a 1:1 ligand-to-metal ratio with a detection limit of 1.3 × 10⁻⁴ M Cu²⁺ and 1.26 × 10⁻⁵ M Hg²⁺, respectively.     

Two new reversible naphthalimide‐based fluorescent chemosensors for Hg2+

Naphthalimide‐based fluorescent probes 1 and 2 were synthesized, and were designed to form probe–Hg complexes through Hg²⁺ ions coordinated to the amide group and imidazole group. They showed high sensitivity and were selective ‘naked‐eye’ chemosensors for Hg²⁺ in phosphate buffer. The fluorescence of compounds 1 and 2 could be quenched up to 90% by the addition of Hg²⁺. Reversible probes can detect Hg²⁺ ions over a wide pH range (7.0–10.0). Copyright © 2015 John Wiley & Sons, Ltd.     

A highly selective and simple fluorescent sensor for mercury (II) ion detection based on cysteamine‐capped CdTe quantum dots synthesized by the reflux method

Cysteamine (CA)‐capped CdTe quantum dots (QDs) (CA–CdTe QDs) were prepared by the reflux method and utilized as an efficient nano‐sized fluorescent sensor to detect mercury (II) ions (Hg²⁺). Under optimum conditions, the fluorescence quenching effect of CA–CdTe QDs was linear at Hg²⁺ concentrations in the range of 6.0–450 nmol/L. The detection limit was calculated to be 4.0 nmol/L according to the 3σ IUPAC criteria. The influence of 10‐fold Pb²⁺, Cu²⁺ and Ag⁺ on the determination of Hg²⁺ was < 7% (superior to other reports based on crude QDs). Furthermore, the detection sensitivity and selectivity were much improved relative to a sensor based on the CA–CdTe QDs probe, which was prepared using a one‐pot synthetic method. This CA–CdTe QDs sensor system represents a new feasibility to improve the detection performance of a QDs sensor by changing the synthesis method. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural investigations of pyridin-4-yl indolizine modified beta-cyclodextrin derivatives as fluorescent chemosensors for organic guest molecules

In order to investigate the substituent effects on their conformations and spectroscopic properties, a series of pyridin-4-ylindolizine modified beta-cyclodextrin derivatives were studied by 2D NMR (ROESY spectra) in D2O, circular dichro?sm, and fluorescence spectroscopy. It was found that the linked indolizin-beta-cyclodextrin compounds exhibited two types of conformations, as a function of the substituent, in which fluorescent moieties formed either an intramolecular complex or were not included in the hydrophobic cavity of the macrocycle. Under addition of organic guest species in a phosphate buffer at neutral pH, the variation of emission fluorescence intensity showed that these compounds are of significance for detection of volatile organic molecules and adamantane derivatives and might be used as molecular chemosensor.     

Multimode selective detection of mercury by chiroptical fluorescent sensors based on methionine/cysteine

Two multimode Hg(II) sensors, L‐MethBQA and L‐CysBQA, were obtained by fusing methionine or S‐methyl cysteine, into a bis‐quinolyl amine‐based chiral podand scaffold. Quinolyl groups serve as the fluorophore and possess nitrogen lone pairs capable of chelating metal ions. On exposure to Hg²⁺ or Zn²⁺, these sensors show signal enhancement in fluorescence. However, Cu²⁺ quenches their fluorescence in 30:70 acetontrile/water. L‐CysBQA complexes with Hg²⁺, producing an exciton‐coupled circular dichroism spectrum with the opposite sign to the one that is produced by Cu²⁺ or Zn²⁺ complexation. L‐CysBQA binds Hg²⁺ more strongly than Zn²⁺ and is shown to differentiate Hg²⁺ from other metal ions, such as Zn²⁺, Cu²⁺, Ni²⁺, and Pb²⁺, exceptionally well. The synergistic use of relatively soft sulfur, quinoline‐based chiral ligands and chiroptically enhanced fluorescence detection results in high sensitivity and selectivity for Hg²⁺. Chirality, 2011. © 2011 Wiley‐Liss, Inc.     

Tetrasubstituted cyclopentenone‐based fluorescent chemosensors for the selective detection of Fe3+ and Cu2+ ions

Fluorescent chemosensors based on 4‐hydroxy cyclopentenones were synthesized by the base catalyzed reaction of 1,5‐diphenyl‐pentane‐1,3,5‐trione with benzil and thenil. The molecule obtained by the benzil reaction was found to be useful for the selective detection of Fe³⁺ by fluorescence turn‐off, while the molecule synthesized by the thenil reaction was useful for selective detection of Cu²⁺ by fluorescent turn‐on. Details of the synthesis, complexation mode, nature of binding, reversibility, and pH studies of the two sensors are discussed. The studies revealed that the sensors were suitable for determining Fe³⁺ and Cu²⁺ content in real water samples.     

A carbonothioate‐based highly selective fluorescent probe with a large Stokes shift for detection of Hg2+

Mercury (Hg) is one of the heavy metal pollutants in the environment. Even a very small amount of mercury can cause serious harm to human beings. Herein, we reported a new carbonothioate‐based fluorescent probe for the detection of Hg²⁺ without interference from other metal ions. This probe possessed a very large Stokes shift (192 nm), which could improve the detection sensitivity by minimizing the interferences resulted from self‐absorption or auto‐fluorescence. With the addition of Hg²⁺ to the probe solution, considerable fluorescence enhancement was observed. Additionally, the Hg²⁺ concentration of 0–16 μM and fluorescence intensity showed a good linear relationship (y = 22106× + 53108, R² = 0.9955). Finally, the proposed probe was used to detect Hg²⁺ in real water samples, and its result was satisfactory. Therefore, our proposed probe would provide a promising method for the determination of Hg²⁺ in the environment.     

A highly selective colorimetric and long‐wavelength fluorescent probe for the detection of Hg2+

Currently, the fluorescent probe is an important method for detecting heavy metal ions, especially mercury ion (Hg²⁺), which is harmful to the health of humans and the environment due to its toxicity and extensive use. In this paper, we designed and synthesized a colorimetric and long‐wavelength fluorescent probe Hg‐P with high sensitivity and excellent selectivity, which could detect Hg²⁺ by the changes of visual color, fluorescence and absorption spectroscopy. With the addition of Hg²⁺ to probe Hg‐P solution, its color changed from yellow to pink, and showed a 171 nm red‐shifted absorption spectrum. Probe Hg‐P was used in real water and soil solution samples to detect Hg²⁺, and the result is satisfactory. Therefore, this new probe shows great value and application in detecting Hg²⁺ in the environment.     

A water-soluble 1,8-naphthalimide-based 'turn on' fluorescent chemosensor for selective and sensitive recognition of mercury ion in water

A water-soluble 1,8-naphthalimide-based fluorescent chemosensor 1, bearing two acetic carboxylic moieties, exhibited high selectivity and sensitivity for recognition of Hg(2+) ion in water over other heavy and transition metal (HTM) ions with fluorescent enhancement. An increase in the fluorescent intensity at 562 nm was due to the formation of a 1:1 1-Hg(2+) inclusion complex.     

A colorimetric sensor for the selective detection of fluoride ions

A colorimetric receptor L was prepared. Receptor L can selectively sense F^? based on distinct color changes among a series of ions. It can selectively sense F^? through an intramolecular hydrogen bond interaction. A Job plot indicated a 1:1 complexation stoichiometry between receptor L and F^?. The association constant for L –F^? in CH₃CN was determined as 9.70 × 10⁴ M^?1 using a Stern–Volmer plot.     

A highly selective fluorescent probe for pyrophosphate detection in aqueous solutions

A novel and simple fluorescence enhancement method is introduced for selective pyrophosphate (PPi) sensing in an aqueous solution. The method is based on a 1:1 metal complex formation between tris(8‐hydroxyquinoline‐5‐sulphonate) thulium(III) [Tm(QS)₃] and PPi ion. The linear response covers a concentration range of 1.6 × 10^?7–1.0 × 10^?5 mol/L PPi and the detection limit is 2.3 × 10^?8 mol/L. The association constant of Tm(QS)₃–PPi complex was calculated as 2.6 × 10⁵ mol/L. Tm(QS)₃ shows a selective and sensitive fluorescence enhancement toward PPi ion in comparion with I₃^?, NO₃^?, CN^?, CO₃^2?, Br^?, Cl^?, F^?, H₂PO₄^? and SO₄^2?, which is attributed to higher stability of the inorganic complex between pyrophosphate ion and Tm(QS)₃. Copyright © 2011 John Wiley & Sons, Ltd.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

A peptide-based fluorescent ratiometric sensor for quantitative detection of proteins

A ratiometric fluorescent sensor was obtained by solid-phase synthesis of a peptide singly labeled at its N-terminus with a 3-hydroxychromone (3HC) derivative, an environmentally sensitive fluorophore with a two-band emission. The construct contains the binding site recognized by an antibody fragment, scFv1F4_Q34S, with nanomolar (nM) affinity. The dye only marginally affected the kinetic and equilibrium binding parameters of the scFv-peptide interaction, as measured by surface plasmon resonance. On interaction with the antibody fragment, the sensor showed up to 47% change in the ratio of its two emission bands, indicating an enhanced screening of the 3HC fluorophore from bulk water. Competition with two unlabeled peptides of different lengths led to a dynamic displacement of the construct governed by the relative binding constants. Calibration showed that the response is proportional to the ratio of scFv1F4_Q34S to labeled peptide. The detection limit of scFv1F4_Q34S was 15 nM. In a more complex medium (100 μg/ml bovine serum albumin), the scFv could be detected in the 50- to 100-nM range. This work demonstrates that, with the perspective of further improvements of the dye spectroscopic properties, fluorescent ratiometric sensing based on small synthetic peptides represents a promising tool for quantitative target detection.     

A novel fluorescent sensor based on electrosynthesized benzene sulfonic acid‐doped polypyrrole for determination of Pb(II) and Cu(II)

To develop conducting organic polymers (COPs) as luminescent sensors for determination of toxic heavy metals, a new benzene sulfonic acid‐doped polypyrrole (PPy‐BSA) thin film was electrochemically prepared by cyclic voltammetry (CV) on flexible indium tin oxide (ITO) electrode in aqueous solution. PPy‐BSA film was characterized by FTIR spectrometry, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The optical properties of PPy‐BSA were investigated by ultraviolet (UV)‐visible absorption and fluorescence spectrometry in dimethylsulfoxide (DMSO) diluted solutions. PPy‐BSA fluorescence spectra were strongly quenched upon increasing copper(II) ion (Cu²⁺) and lead(II) ion (Pb²⁺) concentrations in aqueous medium, and linear Stern–Volmer relationships were obtained, which indicated the existence of a main dynamic fluorescence quenching mechanism. BSA‐PPy sensor showed a high sensitivity for detection of both metallic ions, Cu²⁺ and Pb²⁺, with very low limit of detection values of 3.1 and 18.0 nM, respectively. The proposed quenching‐fluorimetric sensor might be applied to the determination of traces of toxic heavy metallic ions in water samples.     

Development of a fluorescent probe for detection of citrulline based on photo-induced electron transfer

Peptidyl arginine deiminases (PADs) catalyze the post-translational deimination of peptidyl arginine residues to form citrulline residues. Aberrant citrullination of histones by one of the PAD isozymes, PAD4, is associated with various diseases, including rheumatoid arthritis, so high-throughput screening systems are needed to identify PAD4 inhibitors as chemical tools to investigate the role of PAD4, and as candidate therapeutic agents. Here, we utilized the addition-cyclization reaction between phenylglyoxal and citrulline under acidic conditions to design turn-on fluorescent probes for citrulline based on the donor-excited photoinduced electron transfer (d-PeT) mechanism. Among several derivatives of phenylglyoxal bearing a fluorescent moiety, we found that FGME enabled detection of citrulline without a neutralization process, and we used it to establish a simple methodology for turn-on fluorescence detection of citrulline.     

A universal fluorescent aptasensor based on AccuBlue dye for the detection of pathogenic bacteria

We report a universal fluorescent aptasensor based on the AccuBlue dye, which is impermeant to cell membranes, for the detection of pathogenic bacteria. The sensor consists of AccuBlue, an aptamer strand, and its complementary strand (cDNA) that partially hybridizes to the aptamer strand. We have fabricated two models by changing the sequence of the reaction between the elements in the system. One is the “signal on” model in which the aptamer is first bound to the target, followed by the addition of cDNA and AccuBlue, at which time the cDNA hybridizes with the free unreacted aptamer and forms a double-stranded DNA (dsDNA) duplex. Such hybridization causes AccuBlue to insert into the dsDNA and exhibit significantly increased fluorescence intensity because of the specific intercalation of the AccuBlue into dsDNA rather than single-stranded DNA (ssDNA). The other model, “signal off,” involves hybridization of the aptamer with cDNA first, resulting in high fluorescence intensity on the addition of AccuBlue. When the target is added, the aptamer binds the target, causing the cDNA to detach from the dsDNA duplex and resulting in low fluorescence as a result of the liberation of AccuBlue. Because this design is based purely on DNA hybridization, and AccuBlue is impermeant to cell membranes, it could potentially be adapted to a wide variety of analytes.     

A latent green fluorescent styrylcoumarin probe for the selective growth and detection of Gram negative bacteria

A novel, green fluorescent β-alanylstyrylcoumarin derivative was synthesized and evaluated for its performance as a fluorogenic enzyme substrate on a range of clinically relevant microorganisms. The substrate was selectively hydrolysed by β-alanyl aminopeptidase producing P. aeruginosa resulting in an on-to-off fluorescent signal. Growth inhibitory effect of the substrate was observed on Gram positive bacteria and yeasts. Meanwhile, Gram negative species, despite their extremely protective cell envelope, showed ready uptake and accumulation of the substrate within their healthy growing colonies displaying intense green fluorescence.