Structural and thermodynamic properties of starches extracted from GBSS and GWD suppressed potato lines

A combined DSC–SAXS approach was employed to study the effects of amylose and phosphate esters on the assembly structures of amylopectin in B-type polymorphic potato tuber starches. Amylose and phosphate levels in the starches were specifically engineered by antisense suppression of the granule bound starch synthase (GBSS) and the glucan water dikinase (GWD), respectively. Joint analysis of the SAXS and DSC data for the engineered starches revealed that the sizes of amylopectin clusters, thickness of crystalline lamellae and the polymorphous structure type remained unchanged. However, differences were found in the structural organization of amylopectin clusters reflected in localization of amylose within these supramolecular structures. Additionally, data for annealed starches shows that investigated potato starches possess different types of amylopectin defects. The relationship between structure of investigated potato starches and their thermodynamic properties was recognized.     

Gel formation in mixtures of high amylopectin potato starch and potato starch

The effects of starch granules on the rheological behaviour of gels of native potato and high amylopectin potato (HAPP) starches have been studied with small deformation oscillatory rheometry. The influence of granule remnants on the rheological properties of samples treated at 90 °C was evident when compared with samples treated at 140 °C, where no granule remnants were found. The presence of amylose in native potato starch gave to stronger network formation since potato starch gave higher moduli values than HAPP, after both 90 and 140 °C treatments. In addition, amylose may have strengthened the network of HAPP because higher moduli values were obtained when native potato starch was added to the system. The moduli values of the mixtures also increased with increasing polysaccharide concentration in the system, which is due to an increment in the polysaccharide chain contacts and entanglements. Finally, it was found that a mixture of commercial amylose from potato starch and HAPP resulted in lower values of G′ compared to native potato starch. This indicates that the source of amylose is important for the properties in a blend with native amylopectin.     

Characterization of Molecular Structure of Starch Granules in Suspension-cultured Cells from Ipomoea cordatotriloba Denn.

The molecular structure of starch granules formed in suspension-cultured cells of Ipomoea cordatotriloba Denn. was characterized by its chain length distribution, which was compared to those of the starches from the root and leaf of the original plant. The cultured cell starches were spherical and had a very small granule size (about 2 μm). The debranched starches roughly separated into three fractions during gel-permeation chromatography, and the fractions were defined as Fr.1, 2, and 3, respectively. The chain length distribution of the debranched cultured cell starch showed that the high molecular weight fraction (Fr.1), referred to as an amylose fraction, was much less than those of the root and leaf starches. The ratio of the two lower fractions (Fr.3/Fr.2) of the cultured cell starch, which was mainly derived from unit chains of amylopectin, was greatest among the starches, suggesting that the amylopectin from the cultured cell starch has much shorter unit chains. By X-ray diffraction analysis, it was found that both cultured cell and leaf starch granules have low crystallinity.     

Physico-chemical and degradative properties of in-planta re-structured potato starch

Starch re-structured directly in potato tubers by antisense suppression of starch branching enzyme (SBE), granule bound starch synthase (GBSS) or glucan water dikinase (GWD) genes was studied with the aim at disclosing the effects on resulting physico-chemical and enzyme degradative properties. The starches were selected to provide a combined system with specific and extensive alterations in amylose and covalently esterified glucose-6-phosphate (G6P) contents. As an effect of the altered chemical composition of the starches their hydrothermal characteristics varied significantly. Despite of the extreme alterations in phosphate content, the amylose content had a major affect on swelling power, enthalpy for starch gelatinization and pasting parameters as assessed by Rapid Visco Analysis (RVA). However, a combined influence of the starch phosphate and long glucan chains as represented by high amylose or long amylopectin chain length was indicated by their positive correlation to the final viscosity and set back (RVA) demonstrating the formation of a highly hydrated and gel-forming system during re-structuring of the starch pastes. Clear inverse correlations between glucoamylase-catalyzed digestibility and amylopectin chain length and starch phosphate and lack of such correlation with amylose content indicates a combined structuring role of the phosphate groups and amylopectin chains on the starch glucan matrix.     

Preparation and characterization of soluble starches having different molecular sizes and composition,by acid hydrolysis in different alcohols

Potato and waxy-maize starches were separately modified for 1 h at 65° with 0.36% hydrochloric acid in methanol, ethanol, 2-propanol, and 1-butanol. All of the modified starches were readily soluble in hot water, to give crystal-clear solutions up to a concentration of at least 20% (w/v). The modified granules were studied by light-microscopy and iodine-iodide staining. All of the modified starches retained their granule appearance, although with various degrees of damage that progressively increased from methanol to 1-butanol. Both hydrolysis and alcoholysis occurred, but to different extents in the different alcohols. The highest proportion of alcoholysis occurred in methanol where 50% of the resulting molecules were glycosides, the lowest in 1-butanol where 6% were glycosides. The number-average molecular weights of the modified starches also progressively decreased from 126,670 for the methanol-modified waxy-maize starch to 4,750 for the 1-butanol-modified potato starch. The methanol- and ethanol-modified potato starches were fractionated into amylose and amylopectin components. The 2-propanol- and 1-butanol-modified potato starches gave only an amylopectin component. The amylose components were characterized by gel-permeation chromatography on Bio-Gel A-5m, and the amylopectin components, on Bio-Gels A-150m and A-0.5m. The molecular sizes of the amylose and amylopectin components progressively decreased from methanol- to 1-butanol-modified starches. Furthermore, the polymodal composition of the amylopectin component was decreased to give a more homogeneous product. Waxy-maize starch was modified in methanol and 2-propanol and gave products that were of lower molecular size and more homogeneous than the polymodal native starch. It is shown that the differential effect of the different alcohols on the modification of the starch granules is produced by effecting different concentrations of acid inside the granule, where hydrolysis occurs in the 10–12% of water contained in the granule. It is postulated that 2-propanol and 1-butanol dissolve the double-helical, crystalline regions in the starch granule to give different types of products under otherwise identical conditions of modification.     

Effect of acid–alcohol treatment on the molecular structure and physicochemical properties of maize and potato starches

The molecular structure and physicochemical properties of acid–alcohol treated maize and potato starches (0.36% HCl in methanol at 25 °C for 1–15 days) were investigated. The yields of the modified starches were ranging from 91 to 100%. The average granule size of modified starches decreased slightly. The solubility of starches increased with the increase of treatment time, and the pasting properties confirmed the high solubility of modified starches. The gelatinization temperatures and range of gelatinization increased with the increase of treatment time except T_o (onset temperature) of maize starch. Molecular structures of modified starches suggested the degradation of starches occurred mostly within the first 5 days of treatment, and degradation rate of potato starch was higher than maize starch both in amylopectin and in amylose. Maize starch was found less susceptible to acid–alcohol degradation than potato starch.     

Relationship between the distribution of the chain length of amylopectin and the crystalline structure of starch granules

The distributions of chain lengths in the amylopectins of starches from 20 species (11 A-, 6 B-, and 3 C-type) were characterised by h.p.l.c. in terms of the relationship between the molecular structure of the amylopectin and the crystalline structure of the starch granule. The weight-average chain-lengths of the amylopectins of the A-, B-, and C-type starches were in the ranges 23–29, 30–44, and 26–29, respectively. Gel-permeation chromatograms of the amylopectins debranched with isoamylase showed bimodal distributions of fractions containing long and short chains for 17 specimens (including corn, rice, potato, etc.) and trimodal distributions, of which the fraction containing short chains had twin peaks, for wheat, tapioca, and tulip amylopectins. The correlation coefficients between the average chain-lengths of amylopectins and the fractions of long and short chains and the ratio of the fractions of short and long chains by weight were 0.90, 0.69, and ?0.95, respectively. In general, amylopectin molecules of A-type starches have shorter chains in both the long- and short-chain fractions and larger amounts of the short-chain fractions than those of the B-type starches. The chain lengths of amylopectins of the C-type starches were intermediate and it is inferred that these starches possibly yield any type of crystalline structure depending on the environmental temperature and other factors, whereas the A- and B-type starches are insensitive to temperature.     

Screening for and Identification of Starch-, Amylopectin-, and Pullulan-Degrading Activities in Bifidobacterial Strains

Forty-two bifidobacterial strains were screened for α-amylase and/or pullulanase activity by investigating their capacities to utilize starch, amylopectin, or pullulan. Of the 42 bifidobacterial strains tested, 19 were capable of degrading potato starch. Of these 19 strains, 11 were able to degrade starch and amylopectin, as well as pullulan. These 11 strains, which were shown to produce extracellular starch-degrading activities, included 5 strains of Bifidobacterium breve, 1 B. dentium strain, 1 B. infantis strain, 3 strains of B. pseudolongum, and 1 strain of B. thermophilum. Quantitative and qualitative enzyme activities were determined by measuring the concentrations of released reducing sugars and by high-performance thin-layer chromatography, respectively. These analyses confirmed both the inducible nature and the extracellular nature of the starch- and pullulan-degrading enzyme activities and showed that the five B. breve strains produced an activity that is consistent with type II pullulanase (amylopullulanase) activity, while the remaining six strains produced an activity with properties that resemble those of type III pullulan hydrolase.     

Origins of B-type crystallinity in glycerol-plasticised, compression-moulded potato starches

The amount of B-type crystallinity in compression-moulded, glycerol-plasticised potato starches was strongly dependent on both the properties of the potato starch used and the applied processing conditions. The presence of amylose and the morphology of the potato starch used, but also processing parameters such as moulding temperature and water content during moulding affected the amount of B-type crystallinity in the materials and thus the ultimate mechanical properties of the plasticised starches. This indicated that the direct relation between composition and physical properties of processed starches is not always valid; processing parameters are important tools for controlling the physical properties of processed starches as they influence the amount of B-type crystallinity in the material. It was shown that the total amount of B-type crystallinity in the glycerol-plasticised potato starches should be considered as a summation of residual amylopectin crystallinity and recrystallisation of both amylose and amylopectin, being strongly dependent on the applied processing conditions. In order to explain the observed amount of B-type crystallinity in these starches, partial (co-)crystallisation of both amylose and amylopectin should occur at high moulding temperatures. The measured mechanical properties of the plasticised potato starches correlated well with the amount of B-type crystallinity observed in the materials.     

Comparison of potato amylopectin starches and potato starches — influence of year and variety

Starches from three potato varieties and their respective transformants producing amylopectin starch were studied over a period of 3 years. The gelatinisation, swelling and dispersion properties were studied using differential scanning calorimetry (DSC), X-ray diffraction, swelling capacity measurements and a Brabender Viscograph.

The potato amylopectin starches (PAP) exhibited higher endothermic temperatures as well as higher enthalpies than the normal potato starches (NPS). PAP samples gave rise to an exceptionally sharp viscosity peak during gelatinisation and a relatively low increase in viscosity on cooling. Swelling capacity measurements showed that PAP granules swelled more rapidly, and that the dispersion of the swollen granules occurred at a lower temperature (85°C). Analysis of variance (ANOVA) also revealed that the year influenced the DSC results, and that both year and variety affect some of the Brabender parameters. Furthermore, the PAP and NPS samples were subjected to heat–moisture treatment at three different moisture levels, and the Brabender viscosity properties were studied.     

Origin of defects in assembled supramolecular structures of sweet potato starches with different amylopectin chain-length distribution

A combined approach of fluorophore-assisted capillary electrophoresis (FACEL), high-sensitivity differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), small-angle X-ray scattering (SAXS), and light (LM) and scanning electron microscopy (SEM) was applied to study the effects of changes in amylopectin chain-length distribution on the assembly structures of sweet potato starches with similar amylose levels. It was shown that unlike ordinary sweet potato starch, starch extracted from Quick Sweet cultivar of sweet potato had anomalous high level of amylopectin chains with a degree of polymerization (DP) 6–12. Joint analysis of the obtained data revealed that amylopectin chains with DP 10–24 are, apparently, the dominant material for the formation of supramolecular structures in starch granules. In contrast, amylopectin chains with DP < 10 facilitated the formation of defects within crystalline lamellae. An increase in relative content of amylopectin chains with DP < 10 is accompanied by the correlated structural alterations manifested at all levels of starch granule organization (crystalline lamellae, amylopectin clusters, semi-crystalline growth rings, and granule morphology). Thus, the short amylopectin chains with DP < 10 were considered as an origin of the defectiveness in starch supramolecular structures.     

Structure function relationships of transgenic starches with engineered phosphate substitution and starch branching

Potato tuber starch was genetically engineered in the plant by the simultaneous antisense suppression of the starch branching enzyme (SBE) I and II isoforms. Starch prepared from 12 independent lines and three control lines were characterised with respect to structural and physical properties. The lengths of the amylopectin unit chains, the concentrations of amylose and monoesterified phosphate were significantly increased in the transgenically engineered starches. Size exclusion chromatography with refractive index detection (SEC-RI) indicated a minor decrease in apparent molecular size of the amylose and the less branched amylopectin fractions. Differential scanning calorimetry (DSC) revealed significantly higher peak temperatures for gelatinisation and retrogradation of the genetically engineered starches whereas the enthalpies of gelatinisation were lower. Aqueous gels prepared from the transgenic starches showed increased gel elasticity and viscosity. Principle component analysis (PCA) of the data set discriminated the control lines from the transgenic lines and revealed a high correlation between phosphate concentration and amylopectin unit chain length. The PCA also indicated that the rheological characteristics were primarily influenced by the amylose concentration. The phosphate and the amylopectin unit chain lengths had influenced primarily the pasting and rheological properties of the starch gels.     

Rate studies of the amylose–iodine reaction in unfractionated starch samples of various plant origin

The initial rate of the fast reaction among amylose, iodine, and iodide ions was studied in unfractionated corn, potato, rice, wheat, and arrowroot starches. It was found that the reaction followed the same rate equation as the one established in a previous study using pure amylose fractions containing no amylopectin. There were significant differences, however, among the rate constants of the various starches investigated. These variations were explained in terms of the different average molecular weights of the amylose fractions of these starches. Since whole potato starch indicated a rate constant well within the fange of those of pure amylose fraction (obtained from the same potato starch samples), it was concluded, that amylopectin did not interfere significantly with the rate of the complexation reaction.     

Chemical and physical properties of ginkgo (Ginkgo biloba) starch

Starch isolated from mature Ginkgo biloba seeds and commercial normal maize starches were subjected to α-amylolysis and acid hydrolysis. Ginkgo starch was more resistant to pancreatic α-amylase hydrolysis than the normal maize starch. The chain length distribution of debranched amylopectin of the starches was analyzed by using high performance anion-exchange chromatography equipped with an amyloglucosidase reactor and a pulsed amperometric detector. The chain length distribution of ginkgo amylopectin showed higher amounts of both short and long chains compared to maize starch. Naegeli dextrins of the starches prepared by extensive acid hydrolysis over 12 days demonstrated that ginkgo starch was more susceptible than normal maize to acid hydrolysis. Ginkgo dextrins also demonstrate a lower concentration of singly branched chains than maize dextrins, and unlike maize dextrin, debranched ginkgo shows no multiple branched chains. The ginkgo starch displayed a C-type X-ray diffraction pattern, compared to an A-type pattern for maize. Ginkgo starch and maize starch contained 24.0 and 17.6% absolute amylose contents, respectively.     

Phosphate esters in amylopectin clusters of potato tuber starch

Starch phosphate is important in starch metabolism and in order to deduce its location and structural effects in clusters and building blocks of amylopectin, these were isolated from a normal potato (WT) and two starches with antisense suppressed glucan water dikinase (asGWD) activity and starch branching enzyme (asSBE) activity possessing suppressed and increased phosphate contents, respectively. Neutral N-chains and phosphorylated P-chains of the amylopectin macromolecules were similar in WT and asGWD, whereas asSBE possessed considerably longer P-chains. Cluster β-limit dextrins were isolated by α-amylase treatment and successive β-amylolysis. Cluster sizes were generally smaller in asSBE. The building block composition of neutral N-clusters were very similar in WT and asGWD, while asSBE was different, containing less blocks with degree of polymerization (DP)>14. Phosphate content of the P-clusters of WT and asGWD was rather similar, while asSBE contained highly phosphorylated P-clusters with proportionally more P-chains and a low degree of branching. The average chain lengths of the P-clusters were, however, similar in all samples. Our data demonstrate only minor effect on the cluster structure in relation to phosphate deposition suggesting conserved reaction patterns of starch phosphorylation. Models are suggested to account for the principle structural and functional effects of starch phosphate esters.     

Acetyl substitution patterns of amylose and amylopectin populations in cowpea starch modified with acetic anhydride and vinyl acetate

To study the effect of reagent type on the distribution pattern of acetyl groups in acetylated cowpea starch, amylose and amylopectin populations were isolated from the starch granules after modification to a low degree of substitution (DS < 0.1) with acetic anhydride and vinyl acetate, respectively. Slowly reacting reagent vinyl acetate resulted in higher DS values for the amylopectin populations when compared to the rapidly reacting reagent acetic anhydride. The two reagents had similar effects on the acetylation level of amylose, suggesting that the amorphous regions of granules were easily accessible for both reagents. The acetyl substitution patterns were analyzed by enzymatic degradation followed by characterization of the obtained fragments using chromatographic and mass spectrometric techniques. The distributions of acetyl groups along the amylose and amylopectin chains were more clustered for modification with vinyl acetate as compared with modification with acetic anhydride. Between the two acetylation types, pronounced differences in the acetyl substitution patterns were observed for the large fragments obtained after -amylase digestion; only slight differences were exhibited for the small fragments obtained by exhaustive enzymatic digestion of amylose and amylopectin populations.     

Preparation and characterization of new and improved soluble-starches, -amylose, and -amylopectin by reaction with benzaldehyde/zinc chloride

Seven different starches from potato, rice, maize, waxymaize, amylomaize-VII, shoti, and tapioca, and potato amylose and potato amylopectin have been reacted with benzaldehyde, catalyzed by ZnCl₂, to give new water-soluble starches and water soluble-amylose and soluble-amylopectin. In contrast to the native starches, aqueous solutions of the modified starches could not be precipitated with 2-, 3-, or 4-volumes of ethanol. β-Amylase gave no reaction with the modified starches, in contrast to the native starches, indicating that the modification occurred exclusively at the nonreducing-ends, giving 4,6-benzylidene-d-glucopyranose at the nonreducing-ends. Reactions of α-amylase with native and modified potato and rice starches gave a decrease in the triiodide blue color and an increase in the reducing-value that were similar for the native- and modified-starches, indicating the modified starches had not been significantly altered by the modification. The benzaldehyde-modified starches and benzaldehyde-modified potato amylose and potato amylopectin components, therefore, have a starch structure very much like their native counterparts, in contrast to the Lintner, Small, and the alcohol/acid-hydrolyzed soluble-starches that have undergone acid hydrolysis. The benzaldehyde-modified starches and starch components have significantly higher water solubility than their native counterparts even though the structures of the modified starches had only been slightly altered from the structures of their native counterparts. They all gave crystal-clear solutions that did not retrograde.     

Distribution of methyl substituents in amylose and amylopectin from methylated potato starches

Granular potato starches were methylated in aqueous suspension with dimethyl sulfate to molar substitution (MS) values up to 0.29. Fractions containing mainly amylose or amylopectin were obtained after aqueous leaching of the derivatised starch granules. Amylopectin in these fractions was precipitated with Concanavalin A to separate it from amylose. Amylose remained in solution and was enzymatically converted into D-glucose for quantification, thereby taking into account the decreased digestibility due to the presence of methyl substituents. It was found that the MS of amylose was 1.6-1.9 times higher than that of amylopectin in methylated starch granules. The distributions of methyl substituents in trimers and tetramers, prepared from amylose- or amylopectin-enriched fractions, were determined by FAB mass spectrometry and compared with the outcome of a statistically random distribution. It turned out that substituents in amylopectin were distributed heterogeneously, whereas substitution of amylose was almost random. The results are rationalised on the basis of an organised framework that is built up from amylopectin side chains. The crystalline lamellae are less accessible for substitution than amorphous branching points and amylose.     

The cluster structure of barley amylopectins of different genetic backgrounds

The unit chains of amylopectin are organized into clusters. In this study, the cluster structure was analysed in detail in four different genotypes of barley, of which two possessed the amo1 genetic background. Amylose content of the barley starches differed from 0 to 32.6%. Isolated amylopectin was hydrolysed with α-amylase from Bacillus subtilis into domains, defined as groups of clusters, which were size-fractionated by methanol. The domain fractions were further treated with α-amylase to release single clusters. Amylopectin, domains and clusters were subsequently treated with phosphorylase and β-amylase to produce φ,β-limit dextrins and the detailed internal structures of these different structure levels were investigated. Analysis was performed with gel-permeation and anion-exchange chromatography. Equal amount of A-chains were detected in all barleys, but the distribution of B-chains differed. At least two types of domain structures were identified in all four barley varieties. Large domains were built up by large clusters and small domains by small clusters. In all four barley samples the number of long chains was small suggesting that shorter chains with a degree of polymerization of 25-35 also are involved in the interconnection of clusters. The cluster structure of the amylopectin correlated with the genetic background. The two barley samples with amo1 genetic background possessed a more dense structure. Internal chain lengths in these two barleys were shorter resulting in larger domains built up by larger clusters.     

Change of granular and molecular structures of waxy maize and potato starches after treated in alcohols with or without hydrochloric acid

Starches from waxy maize and potato were treated in methanol and 2-propanol either with or without 0.36% hydrochloric acid at 65 °C for 1 h. The granule morphology, molecular structure and pasting properties of the starches were determined and the effects of treatments on the granule and molecular structures of starch were investigated. Starch treated in alcohols without acid showed loss of native order through the hilum of granules, and no obvious molecular degradation was found. However, acid–alcohol treated starch showed many cracks inside granules, and both waxy maize and potato starches showed obvious molecular degradation after treated. Furthermore, the amylose chains and long chains of amylopectin of starch were more easily degraded with acid–alcohol treatment. The pasting viscosity of acid–alcohol treated starches were also obviously less than that of their counterpart native starch and starch after alcohol treatment. The extent of degradation of molecules and the decrease of pasting viscosity on potato starch after acid–alcohol treated were more obvious than that of waxy maize starch. The result indicates that the degradation preferentially occur in the amorphous region when starch treated by acid–alcohol, and the degradation of starch molecules enhances the amorphous excretion and the occurrence of cracks inside the granules.