Gas-phase removal of biofilms from various surfaces using carbon dioxide aerosols

The present study evaluated the removal of Escherichia coli XL1-blue biofilms using periodic jets of carbon dioxide aerosols (a mixture of solid and gaseous CO₂) with nitrogen gas. The aerosols were generated by the adiabatic expansion of high-pressure CO₂ gas through a nozzle and used to remove air-dried biofilms. The areas of the biofilms were measured from scanning electron micrographs before and after applying the aerosols. The removal efficiency of the aerosol treatment was measured with various air-drying times of the biofilms before the treatment, surface materials, and durations of CO₂ aerosols in each 8-s aerosol–nitrogen cleaning cycle. Nearly 100% of the fresh biofilms were removed from the various surfaces very reliably within 90 s. This technique can be useful for removing unsaturated biofilms on solid surfaces and has potential applications for cleaning bio-contaminated surfaces.     

Removal of different-age biofilms using carbon dioxide aerosols

Many techniques to inactivate or remove biofilms in a wide variety of applications have been developed. Most of these techniques have been applied to biofilms at their initial stage of growth, since they are generally difficult to eradicate once established. The removal of established biofilms has received relatively little attention. In this paper, we report the effectiveness of periodic jets of carbon dioxide aerosols (a mixture of solid and gaseous CO₂) to remove Escherichia coli (XL1-blue) biofilms of different ages (up to 3 weeks) on silicon surfaces. The biofilms were not immersed in liquids after growth/rinsing and were treated with the CO₂ aerosols. The CO₂ aerosols were generated by the adiabatic expansion of high-pressure CO2 gas through a nozzle. The surface area of the biofilms was measured from fluorescent images before and after applying the aerosols for 11, 20, and 30 cycles (each cycle: 8 sec), to compute the removal efficiency. The removal efficiencies decreased with increasing growth time and for the 3-week-old biofilms, they ranged from 91.5 to 99.6% within 4 min. This technique was highly effective for removing both fresh and old biofilms, but some of the biofilm debris such as growth media remained. Further, this CO₂ aerosol technique was compared with other removal techniques.     

Combined application of bacterial predation and carbon dioxide aerosols to effectively remove biofilms

This study evaluated predation with Bdellovibrio bacteriovorous and CO(2) aerosol spraying to remove fluorescent Escherichia coli biofilms from silicon chips. Initial tests found that 7.5×10(5) viable E. coli cells were dispersed into the surrounding environment during aerosol treatment. The total number dispersed per test decreased to only 16 for predated biofilms. This is nearly 50,000-fold lower compared to untreated chips and 1000-fold lower compared to chips soaked in HEPES buffer only. Both scanning electron microscopy (SEM) and fluorescent microscopy analyses confirmed that predation alone did not completely eradicate the biofilm population. When used in conjunction with CO(2) aerosols, however, no fluorescent signals remained and the SEM pictures showed a pristine surface devoid of bacteria. Consequently, this study demonstrates these two methods can be used with each other to significantly remove biofilms from surfaces while also significantly reducing the likelihood of human exposure to potential pathogens during their removal.     

Elimination of adhering bacteria from surfaces by pulsed laser beams

As an alternative to the use of chemicals for cleaning and disinfecting surfaces of equipment in food industry, the efficacy of pulsed laser beams for removal and killing of adherent bacteria from stainless steel surfaces was assessed. Escherichia coli biofilms were produced under dynamic conditions in diluted nutritive medium incubated at 37°C for 24 h. Influence of energy density and number of shots were tested at three wavelengths (1064, 532 and 355 nm). With one 20 ns pulse, results range from 3·5 decimal reductions of the microbial load with ≤50 MW cm⁻² without visible alteration of the surface, to more than 6 decimal reductions with ≤600 MW cm⁻². The measured effect was largely attributed to removal of the micro-organisms and transfer to the surrounding air. The treatment could therefore be improved with respect to the numbers remaining associated with the surface by venting.     

Effectiveness of cleaning techniques used in the food industry in terms of the removal of bacterial biofilms

The effectiveness of cleaning was investigated through food factory trials and laboratory experiments using a naturally occurring biofilm from a food factory environment and generated biofilms. The efficacy of factory cleaning and disinfection programmes was assessed by swabbing and total viable count (TVC) analysis of surfaces before cleaning, after cleaning and after disinfection. Cleaning produced a 0.91 log reduction in the attached population. Investigation of the effectiveness of a variety of cleaning methods in the removal of a naturally occurring food factory biofilm showed that the high pressure spray and the mechanical floor scrubber, which use a high degree of mechanical action, were most effective. Cleaning trials with biofilms of Pseudomonas aeruginosa or Staphylococcus aureus showed that spraying with water at pressures of 34.5, 51.7 and 68.9 bar did not significantly increase the removal, as assessed by direct epifluorescent microscopy (DEM) and swabbing and TVC analysis, beyond the three log reduction observed at 17.2 bar. The effect of spray time at 17.2 bar showed that increasing spray time from 1 to 10 s did not significantly increase removal of Ps. aeruginosa biofilm. Investigation of the optimum distance of the spray lance from the surface at 17.2 bar was found to be between 125 and 250 mm. The use of an alkaline, acidic or neutral detergent prior to spraying with water at 17.2 bar did not significantly increase the removal of Ps. aeruginosa or Staph. aureus. However, the acidic and alkaline products significantly (P = 0.05) affected the viability of Staph. aureus and Ps. aeruginosa, respectively, thereby minimizing the potential for the spread of contamination.     

Atmospheric pressure plasma: a high-performance tool for the efficient removal of biofilms

Introduction

The medical use of non-thermal physical plasmas is intensively investigated for sterilization and surface modification of biomedical materials. A further promising application is the removal or etching of organic substances, e.g., biofilms, from surfaces, because remnants of biofilms after conventional cleaning procedures are capable to entertain inflammatory processes in the adjacent tissues. In general, contamination of surfaces by micro-organisms is a major source of problems in health care. Especially biofilms are the most common type of microbial growth in the human body and therefore, the complete removal of pathogens is mandatory for the prevention of inflammatory infiltrate. Physical plasmas offer a huge potential to inactivate micro-organisms and to remove organic materials through plasma-generated highly reactive agents.

Method

In this study a Candida albicans biofilm, formed on polystyrene (PS) wafers, as a prototypic biofilm was used to verify the etching capability of the atmospheric pressure plasma jet operating with two different process gases (argon and argon/oxygen mixture). The capability of plasma-assisted biofilm removal was assessed by microscopic imaging.

Results

The Candida albicans biofilm, with a thickness of 10 to 20 µm, was removed within 300 s plasma treatment when oxygen was added to the argon gas discharge, whereas argon plasma alone was practically not sufficient in biofilm removal. The impact of plasma etching on biofilms is localized due to the limited presence of reactive plasma species validated by optical emission spectroscopy.     

Removing biofilms from microstructured titanium ex vivo: a novel approach using atmospheric plasma technology

The removal of biofilms from microstructured titanium used for dental implants is a still unresolved challenge. This experimental study investigated disinfection and removal of in situ formed biofilms from microstructured titanium using cold atmospheric plasma in combination with air/water spray. Titanium discs (roughness (Ra): 1.96 µm) were exposed to human oral cavities for 24 and 72 hours (n = 149 each) to produce biofilms. Biofilm thickness was determined using confocal laser scanning microscopy (n = 5 each). Plasma treatment of biofilms was carried out ex vivo using a microwave-driven pulsed plasma source working at temperatures from 39 to 43°C. Following plasma treatment, one group was air/water spray treated before re-treatment by second plasma pulses. Vital microorganisms on the titanium surfaces were identified by contact culture (Rodac agar plates). Biofilm presence and bacterial viability were quantified by fluorescence microscopy. Morphology of titanium surfaces and attached biofilms was visualized by scanning electron microscopy (SEM). Total protein amounts of biofilms were colorimetrically quantified. Untreated and air/water treated biofilms served as controls. Cold plasma treatment of native biofilms with a mean thickness of 19 µm (24 h) to 91 µm (72 h) covering the microstructure of the titanium surface caused inactivation of biofilm bacteria and significant reduction of protein amounts. Total removal of biofilms, however, required additional application of air/water spray, and a second series of plasma treatment. Importantly, the microstructure of the titanium discs was not altered by plasma treatment. The combination of atmospheric plasma and non-abrasive air/water spray is applicable for complete elimination of oral biofilms from microstructured titanium used for dental implants and may enable new routes for the therapy of periimplant disease.     

Combined application of bacterial predation and carbon dioxide aerosols to effectively remove biofilms

This study evaluated predation with Bdellovibrio bacteriovorous and CO₂ aerosol spraying to remove fluorescent Escherichia coli biofilms from silicon chips. Initial tests found that 7.5×10⁵ viable E. coli cells were dispersed into the surrounding environment during aerosol treatment. The total number dispersed per test decreased to only 16 for predated biofilms. This is nearly 50,000-fold lower compared to untreated chips and 1000-fold lower compared to chips soaked in HEPES buffer only. Both scanning electron microscopy (SEM) and fluorescent microscopy analyses confirmed that predation alone did not completely eradicate the biofilm population. When used in conjunction with CO₂ aerosols, however, no fluorescent signals remained and the SEM pictures showed a pristine surface devoid of bacteria. Consequently, this study demonstrates these two methods can be used with each other to significantly remove biofilms from surfaces while also significantly reducing the likelihood of human exposure to potential pathogens during their removal.     

Biofilm characteristics and evaluation of the sanitation procedures of thermophilic Aeribacillus pallidus E334 biofilms

The ability of Aeribacillus pallidus E334 to produce pellicle and form a biofilm was studied. Optimal biofilm formation occurred at 60 °C, pH 7.5 and 1.5% NaCl. Extra polymeric substances (EPS) were composed of proteins and eDNA (21.4 kb). E334 formed biofilm on many surfaces, but mostly preferred polypropylene and glass. Using CLSM analysis, the network-like structure of the EPS was observed. The A. pallidus biofilm had a novel eDNA content. DNaseI susceptibility (86.8% removal) of eDNA revealed its importance in mature biofilms, but the purified eDNA was resistant to DNaseI, probably due to its extended folding outside the matrix. Among 15 cleaning agents, biofilms could be removed with alkaline protease and sodium dodecyl sulphate (SDS). The removal of cells from polypropylene and biomass on glass was achieved with combined SDS/alkaline protease treatment. Strong A. pallidus biofilms could cause risks for industrial processes and abiotic surfaces must be taken into consideration in terms of sanitation procedures.     

Removal of biofilms by intermittent low-intensity ultrasonication triggered bursting of microbubbles

In this study, a chemical-free cleaning method for biofilms removal is presented, which is based on intermittent low-intensity ultrasonication (US) triggered bursting of microbubbles (MB) in such a sequence that MB were continuously introduced into the reaction vessel for 15?min, while US was activated for 2?s after every 2?min of microbubbling. It was found that the fixed biomass, and the extracellular proteins and polysaccharides of 24-h old biofilms grown on a nylon membrane surface were reduced, respectively, by 75, 79 and 72% after treatment by the US?+?MB method. Fourier transform infrared (FTIR) analysis further revealed that the chemical composition of the biofilms was not altered by the US?+?MB treatment, suggesting that biofilms were removed through physical forces due to the generation of a shock wave and a high-speed water jet through US-triggered bursting of the MB. The proposed method can be considered a chemical-free technology for biofilm removal.     

Enhancement of Anaerobic Digestion Using Particulate Growth Systems

Attached media reactors are used for enhancement of wastewater treatment processes including anaerobic condition. Selection of a suitable biofilm carrier is a compelling method to improve anaerobic digestion systems. This study investigates the performance of four fibrous biofilms installed in batch biogas reactors for treatment of cow manure. BioCords HS1, HS2, LS1, and LS2 are manufactured by Bishop Water Technologies, ON, Canada. Effluents and attached growth media were analyzed after batch experiment; methane production, methane yield, transfer efficiencies, organic and solid removal efficiencies, pH, and attached volatile suspended solid (VSS) were measured; VSS attached to biofilms mainly correlated with the specific surface area of each biofilm. Additionally, SEM (scanning electron microscopy) was used for further understanding of biofilm formation process for BioCords and the dissimilarity in their performance. The results indicated that BioCord LS2 had positive impact on achieving higher methane production and removal efficiencies compared to other support media utilized in batch reactors. It was also demonstrated from the experiment that BioCord LS2 potentially could generate higher methane production than conventional batch bioreactor.     

Removal of Burkholderia cepacia biofilms with oxidants

Iodine is used to disinfect the water system aboard US space shuttles and is the anticipated biocide for the international space station. Water quality on spacecraft must be maintained at the highest possible levels for the safety of the crew. Furthermore, the treatment process used to maintain the quality of water on research must be robust and operate for long periods with minimal crew intervention. Biofilms are recalcitrant and pose a major threat with regard to chronic contamination of spacecraft water systems. We measured the effectiveness of oxidizing biocides on the removal and regrowth of Burkholderia (Pseudomonas) cepacia biofilms. B. cepacia, isolated from the water distribution system of the space shuttle Discovery, was grown in continuous culture to produce a bacterial contamination source for biofilm formation and removal studies. A 10(7) CFU ml-1 B. cepacia suspension, in distilled water, was used to form biofilms on 3000 micrometers2 glass surfaces. Rates of attachment were measured directly with image analysis and were found to be 7.8, 15.2, and 22.8 attachment events h-1 for flow rates of 20.7, 15.2, and 9.8 ml min-1, respectively. After 18 h of formation, the B. cepacia biofilms were challenged with oxidants (ozone, chlorine, and iodine) and the rates of biofilm removal determined by image analysis. Fifty percent of the biofilm material was removed in the first hour of continous treatment with 24 mg l-1 chlorine or 2 mg l-1 ozone. Iodine (48 mg l-1) did not remove any measurable cellular material after 6 h continuous contact. After this first removal of biofilms by the oxidants, the surface was allowed to refoul and was again treated with the biocide. Iodine was the only compound that was unable to remove cellular debris from either primary or secondary biofilms. Moreover, treating primary biofilms with iodine increased the rate of formation of secondary biofilms, from 4.4 to 5.8 attachment events h-1. All the oxidants tested inactivated the B. cepacia associated with both primary and secondary biofilms. The amount of biocide needed to inactivate 50% of planktonic B. cepacia in 10 min at 25 degrees C was 8.4, 0.5, and 0.2 mg l-1 for iodine, chlorine, and ozone, respectively. The data suggest that iodine maynot be the best chemical for treating of biofilms when removal of cellular material is required.     

A synergistic d-tyrosine and tetrakis hydroxymethyl phosphonium sulfate biocide combination for the mitigation of an SRB biofilm

Microbiologically influenced corrosion (MIC) is a major problem in various industries such as oil and gas, and water utilities. Billions of dollars are lost to microbiologically influenced corrosion (MIC) each year in the US. The key to MIC control is biofilm mitigation. Sulfate-reducing bacteria (SRB) are often the culprits. They are also involved in souring and biofouling. SRB biofilms are notoriously difficult to eradicate. Due to environmental concerns and increasing costs, better biocide treatment strategies are desired. Recent studies suggested that D: -tyrosine and some other D: -amino acids may signal biofilm dispersal. Experimental results in this work indicated that D: -tyrosine is an effective biocide enhancer for tetrakis hydroxymethyl phosphonium sulfate (THPS) that is a green biocide. Desulfovibrio vulgaris (ATCC 7757) was used in biofilm prevention and biofilm removal tests. It was found that 100?ppm D: -tyrosine alone and 50?ppm THPS alone were both ineffective against the SRB biofilm. However, when 1?ppm D: -tyrosine was combined with 50?ppm THPS, the synergy between the two chemicals successfully prevented the establishment of the SRB biofilm on C1018 mild steel coupon surfaces in batch treatment tests. It also eradicated established SRB biofilms from coupon surfaces in both 1 and 3-h shock treatment tests.     

Hydrodynamic deformation and removal of Staphylococcus epidermidis biofilms treated with urea, chlorhexidine, iron chloride, or DispersinB

The force-deflection and removal characteristics of bacterial biofilm were measured by two different techniques before and after chemical, or enzymatic, treatment. The first technique involved time lapse imaging of a biofilm grown in a capillary flow cell and subjected to a brief shear stress challenge imparted through increased fluid flow. Biofilm removal was determined by calculating the reduction in biofilm area from quantitative analysis of transmission images. The second technique was based on micro-indentation using an atomic force microscope. In both cases, biofilms formed by Staphylococcus epidermidis were exposed to buffer (untreated control), urea, chlorhexidine, iron chloride, or DispersinB. In control experiments, the biofilm exhibited force-deflection responses that were similar before and after the same treatment. The biofilm structure was stable during the post-treatment shear challenge (1% loss). Biofilms treated with chlorhexidine became less deformable after treatment and no increase in biomass removal was seen during the post-treatment shear challenge (2% loss). In contrast, biofilms treated with urea or DispersinB became more deformable and exhibited significant biofilm loss during the post-treatment flow challenge (71% and 40%, respectively). During the treatment soak phase, biofilms exposed to urea swelled. Biofilms exposed to iron chloride showed little difference from the control other than slight contraction during the treatment soak. These observations suggest the following interpretations: (1) chemical or enzymatic treatments, including those that are not frankly antimicrobial, can alter the cohesion of bacterial biofilm; (2) biocidal treatments (e.g., chlorhexidine) do not necessarily weaken the biofilm; and (3) biofilm removal following treatment with agents that make the biofilm more deformable (e.g., urea, DispersinB) depend on interaction between the moving fluid and the biofilm structure. Measurements such as those reported here open the door to development of new technologies for controlling detrimental biofilms by targeting biofilm cohesion rather than killing microorganisms.     

Impact of cleaning and disinfection agents on biofilm structure and on microbial transfer to a solid model food

AIM: To determine how single cells and microcolonies transfer to food from open surfaces in the meat industry. METHODS AND RESULTS: Biofilms of four bacterial strains isolated from food processing surfaces were established on stainless steel substrates conditioned with meat exudate in the presence or absence of CaCl(2). Image analysis of the biofilms showed that the addition of calcium resulted in an increase of the number and size of microcolonies with two strains: Staphylococcus sciuri and Pseudomonas fluorescens. Image analysis of the biofilms of those two strains grown in the presence of calcium was performed before and after contacts with tryptone soya agar as a solid model food. For the biofilms treated or not with a chlorinated alkaline agent, where a decrease in surface coverage occurred, it was accompanied by a decrease in the percentage of the coverage accounted for by microcolonies (P(m)). Attachment strength was greater for P. fluorescens than for S. sciuri. When the P. fluorescens biofilms were treated with a solution containing glutaraldehyde, the contacts did not modify their structure. By contrast, their treatment with chlorinated alkaline resulted, after contacts, in the smallest coverage and P(m). With S. sciuri, a decrease in coverage after contacts always occurred and was the greatest for the untreated biofilms. CONCLUSIONS: After contacts between biofilms and a solid model food, microcolonies were preferentially detached compared with single cells. A chlorinated alkaline product either decreased biofilm attachment strength (P. fluorescens) or unexpectedly increased it (S. sciuri), whereas a glutaraldehyde-based disinfectant increased both attachment strength and microcolony cohesion. SIGNIFICANCE AND IMPACT OF THE STUDY: The contaminating potential of a surface depends not only on the level of contamination but also on the nature, structure and history of the contamination.     

Removal and transfer of viruses on food contact surfaces by cleaning cloths

Contamination of food contact surfaces with pathogens is considered an important vehicle for the indirect transmission of food-borne diseases. Five different cleaning cloths were assessed for the ability to remove viruses from food contact surfaces (stainless steel surface and nonporous solid surface) and to transfer viruses back to these surfaces. Cleaning cloths evaluated include two different cellulose/cotton cloths, one microfiber cloth, one nonwoven cloth, and one cotton terry bar towel. Four viral surrogates (murine norovirus [MNV], feline calicivirus [FCV], bacteriophages PRD1 and MS2) were included. Removal of FCV from stainless steel was significantly greater (P ≤ 0.05) than that from nonporous solid surface, and overall removal of MNV from both surfaces was significantly less (P ≤ 0.05) than that of FCV and PRD1. Additionally, the terry towel removed significantly fewer total viruses (P ≤ 0.05) than the microfiber and one of the cotton/cellulose cloths. The cleaning cloth experiments were repeated with human norovirus. For transfer of viruses from cloth to surface, both cellulose/cotton cloths and microfiber transferred an average of 3.4 and 8.5 total PFU, respectively, to both surfaces, and the amounts transferred were significantly different (P ≤ 0.05) from those for the nonwoven cloth and terry towel (309 and 331 total PFU, respectively). There was no statistically significant difference (P > 0.05) in the amount of virus transfer between surfaces. These data indicate that while the cleaning cloths assessed here can remove viruses from surfaces, some cloths may also transfer a significant amount of viruses back to food contact surfaces.     

Destruction of oral biofilms formed in situ on machined titanium (Ti) surfaces by cold atmospheric plasma

The decontamination of implant surfaces represents the basic procedure in the management of peri-implant diseases, but it is still a challenge. The study aimed to evaluate the degradation of oral biofilms grown in situ on machined titanium (Ti) discs by cold atmospheric plasma (CAP). ～ 200 Ti discs were exposed to the oral cavities of five healthy human volunteers for 72?h. The resulting biofilms were divided randomly between the following treatments: CAP (which varied in mean power, treatment duration, and/or the gas mixture), and untreated and treated controls (diode laser, air-abrasion, chlorhexidine). The viability, quantity, and morphology of the biofilms were determined by live/dead staining, inoculation onto blood agar, quantification of the total protein content, and scanning electron microscopy. Exposure to CAP significantly reduced the viability and quantity of biofilms compared with the positive control treatments. The efficacy of treatment with CAP correlated with the treatment duration and plasma power. No single method achieved complete biofilm removal; however, CAP may provide an effective support to established decontamination techniques for treatment of peri-implant diseases.     

A study of the efficacy of ultrasonic waves in removing biofilms

doi:10.1111/j.1741‐2358.2009.00325.x
A study of the efficacy of ultrasonic waves in removing biofilms Objective: The removal of adherent biofilms was assessed using ultrasonic waves in a non‐contact mode. Materials and Methods: In in vitro experiments, Streptococcus mutans (S. mutans) biofilms were exposed to ultrasonic waves at various frequencies (280 kHz, 1 MHz, or 2 MHz), duty ratios (0–90%), and exposure times (1–3 minutes), and the optimal conditions for biofilm removal were identified. Furthermore, the effect of adding a contrast medium, such as micro bubbles (Sonazoid^®), was examined. The spatial distribution and architecture of S. mutans biofilms before and after ultrasonic wave exposure were examined via scanning electron microscopy. The biofilm removal effect was also examined in in vivo experiments, using a custom‐made oral cleaning device. Results: When a 280 kHz probe was used, the biofilm‐removing effect increased significantly compared to 1 and 2 MHz probes; more than 80% of the adherent biofilm was removed with a duty cycle of 50–90% and a 3 minutes exposure time. The maximum biofilm‐removing effect was observed with a duty cycle of 80%. Furthermore, the addition of micro bubbles enhanced this biofilm‐removing effect. In in vivo experiments, moderate biofilm removal was observed when a 280 kHz probe was used for 5 minutes. Conclusions: This study demonstrated that ultrasonic wave exposure in a non‐contact mode effectively removed adherent biofilms composed of S. mutans in vitro.     

Nonuniform spatial patterns of respiratory activity within biofilms during disinfection.

Fluorescent stains in conjunction with cryoembedding and image analysis were applied to demonstrate spatial gradients in respiratory activity within bacterial biofilms during disinfection with monochloramine. Biofilms of Klebsiella pneumoniae and Pseudomonas aeruginosa grown together on stainless steel surfaces in continuous-flow annular reactors were treated with 2 mg of monochloramine per liter (influent concentration) for 2 h. Relatively little biofilm removal occurred as evidenced by total cell direct counts. Plate counts (of both species summed) indicated an average 1.3-log decrease after exposure to 2 mg of monochloramine per liter. The fluorogenic redox indicator 5-cyano-2,3-ditolyl tetrazolium chloride (CTC) and the DNA stain 4',6-diamidino-2-phenylindole (DAPI) were used to differentiate respiring and nonrespiring cells in biofilms. Epifluorescence micrographs of frozen biofilm cross sections clearly revealed gradients of respiratory activity within biofilms in response to monochloramine treatment. These gradients in specific respiratory activity were quantified by calculating the ratio of CTC and DAPI intensities measured by image analysis. Cells near the biofilm-bulk fluid interface lost respiratory activity first. After 2 h of biocide treatment, greater respiratory activity persisted deep in the biofilm than near the biofilm-bulk fluid interface.     

Susceptibility of Staphylococcus aureus biofilms to reactive discharge gases

Formation of bacterial biofilms at solid–liquid interfaces creates numerous problems in both industrial and biomedical sciences. In this study, the susceptibility of Staphylococcus aureus biofilms to discharge gas generated from plasma was tested. It was found that despite distinct chemical/physical properties, discharge gases from oxygen, nitrogen, and argon demonstrated very potent and almost the same anti-biofilm activity. The bacterial cells in S. aureus biofilms were killed (>99.9%) by discharge gas within minutes of exposure. Under optimal experimental conditions, no bacteria and biofilm re-growth from discharge gas treated biofilms was found. Further studies revealed that the anti-biofilm activity of the discharge gas occurred by two distinct mechanisms: (1) killing bacteria in biofilms by causing severe cell membrane damage, and (2) damaging the extracellular polymeric matrix in the architecture of the biofilm to release biofilm from the surface of the solid substratum. Information gathered from this study provides an insight into the anti-biofilm mechanisms of plasma and confirms the applications of discharge gas in the treatment of biofilms and biofilm related bacterial infections.