Expression and purification of histidine-tagged proteins from the gram-positive Streptococcus gordonii SPEX system

Streptococcus gordonii (S. gordonii) has been used as a gram-positive bacterial expression vector for secreted or surface-anchored recombinant proteins. Fusion of the gram-positive bacterial N-terminal signal sequence to the target protein is all that is required for efficient export. This system is termed SPEX for Surface Protein EXpression and has been used to express proteins for a variety of uses. In this study, the SPEX system has been further developed by the construction of vectors that express polyhistidine-tagged fusion proteins. SPEX vectors were constructed with an N-terminal or C-terminal histidine tag. The C-repeat region (CRR) from Streptococcus pyogenes M6 protein and the Staphylococcus aureus nuclease A (NucA) enzyme were tested for expression. The fusion proteins were purified using metal affinity chromatography (MAC). Results show that the fusion proteins were expressed and secreted from S. gordonii with the His tag at either the N- or C-terminal position and could be purified using MAC. The M6 fusions retained immunoreactivity after expression and purification as determined by immunoblots and ELISA analyses. In addition, NucA fusions retained functional activity after MAC purification. The M6-His and NucA-His fusions were purified approximately 15- and 10-fold respectively with approximately 30% recovery of protein using MAC. This study shows that the polyhistidine tag in either the N- or C-terminal position is a viable way to purify secreted heterologous proteins from the supernatant of recombinant S. gordonii cultures. This study further illustrates the value of the SPEX system for secreted expression and purification of proteins.     

Cleavage and purification of intein fusion proteins using the Streptococcus gordonii spex system

A gram-positive bacterial expression vector using Streptococcus gordonii has been developed for expression and secretion, or surface anchoring of heterologous proteins. This system, termed Surface Protein Expression system or SPEX, has been used to express a variety of surface anchored and secreted proteins. In this study, the Mycobacterium xenopi (Mxe) GyrA intein and chitin binding domain from Bacillus circulans chitinase Al were used in conjunction with SPEX to express a fusion protein to facilitate secretion, cleavage, and purification. Streptococcus gordonii was transformed to express a secreted fusion protein consisting of a target protein with a C-terminal intein and chitin-binding domain. Two target proteins, the C-repeat region of the Streptococcus pyogenes M6 protein (M6) and the nuclease A (NucA) enzyme of Staphylococcus aureus, were expressed and tested for intein cleavage. The secreted fusion proteins were purified from culture medium by binding to chitin beads and subjected to reaction conditions to induce intein self-cleavage to release the target protein. The M6 and NucA fusion proteins were shown to bind chitin beads and elute under cleavage reaction conditions. In addition, NucA demonstrated enzyme activity both before and after intein cleavage.     

Development of PLEX, a plasmid-based expression system for production of heterologous gene products by the gram-positive bacteria Streptococcus gordonii

While Escherichia coli expression systems have been widely utilized for the production of heterologous proteins, these systems have limitations with regard to the production of particular protein products, including poor expression, expression of insoluble proteins into inclusion bodies, and/or expression of a truncated product. Using the surface protein expression (SPEX) system, chromosomally integrated heterologous genes are expressed and secreted into media by the naturally competent gram-positive organism Streptococcus gordonii. After E. coli turned out to be an inappropriate expression system to produce sufficient quantities of intact product, we successfully utilized SPEX to produce the heterologous antigen BH4XCRR that is designed from sequences homologous to the S. pyogenes M-protein C-repeat region. To further enhance production of this product by S. gordonii, we sought to develop a novel system for the production and secretion of heterologous proteins. We observed that under various growth conditions, S. gordonii secreted high levels of a 172 kDa protein, which was identified by N-terminal sequence analysis as the glucosyltransferase GTF. Here we report on the development of a plasmid-based expression system, designated as PLEX, which we used to enhance production of BH4XCRR by S. gordonii. A region from the S. gordonii chromosome that contains the positive regulatory gene rgg, putative gtfG promoter, and gtfG secretion-signal sequence was cloned into the E. coli/Streptococcus shuttle plasmid pVA838. Additionally, the bh4xcrr structural gene was cloned into the same plasmid downstream and in-frame with rgg and gtfG. This plasmid construct was transformed into S. gordonii and BH4XCRR was detected in culture supernatants from transformants at greater concentrations than in supernatants from a SPEX strain expressing the same product. BH4XCRR was easily purified from culture supernatant using a scalable two-step purification process involving hydrophobic-interaction and gel-filtration chromatography.     

Proteolytic release of keratinocyte transglutaminase.

Human keratinocytes express a particulate transglutaminase that can be released from the membrane by limited proteolysis with trypsin or plasmin to yield a form that is congruent to 80 kDa. The enzyme from cultured cells was also releasable by endogenous proteolysis to yield a catalytically active fragment of congruent to 80 kDa. Endogenous release was strongly dependent upon temperature and Ca2+ concentration and was inhibited by iodoacetate, but not by leupeptin, antipain or phenylmethanesulphonyl fluoride. These phenomena raise the possibility of partial translocation of transglutaminase activity to the cytoplasm by proteolysis to which the enzyme is subject during terminal differentiation. In addition, hydrodynamic measurements showed that the endogenously released enzyme was monomeric in solution (79 kDa), whereas that solubilized by hydroxylamine without proteolysis appeared dimeric (190 kDa). The latter dimeric state may reflect either an altered conformation of the enzyme or post-translational modification beyond fatty acid esterification.     

Role of the C terminus in antigen P1 surface localization in Streptococcus mutans and two related cocci.

The C terminus of the major surface protein P1 from Streptococcus mutans is composed of a hydrophilic domain, an LPNTGV motif, a hydrophobic domain, and a charged tail. These features are shared by surface proteins from many gram-positive coccal bacteria. To investigate the role of the C-terminal domains in antigen P1 surface localization, full-length and truncated P1 gene constructs, which were expressed on the shuttle vector pDL276, were transformed into the P1-negative mutant S. mutans SM3352, Streptococcus gordonii DL-1, and Enterococcus faecalis UV202. Transformants were tested for expression of P1 by enzyme-linked immunosorbent assaying and Western blotting. The results showed that full-length P1 was expressed by transformants of all three bacteria and was localized on the cell surface. A fusion protein composed of the Staphylococcus aureus fibronectin binding protein C terminus and the P1 protein N terminus was found to surface localize in S. mutans. Deletion of the entire C-terminal domains resulted in P1 being expressed in the culture supernatant. A P1 truncation, which carried only the hydrophilic domain at its C terminus, was found partially associated with the cell surface. This truncated P1 was readily removed from the isolated cell wall by hot sodium dodecyl sulfate-mercaptoethanol extraction. In contrast, the full-length P1 remained associated with the isolated cell wall after similar treatment, suggesting covalent linkages between the full-length P1 and the cell wall. The results described above showed that antigen P1 was anchored to the cell wall by its C-terminal domains probably via covalent linkages with the cell wall. The results also support a universal mechanism involving the C-terminal domains for protein surface localization among this group of gram-positive bacteria.     

Chemical cross-linking of the cytosolic and nuclear forms of the Ah receptor in hepatoma cell line 1c1c7.

Both cytosolic and high salt nuclear extracts were isolated from Hepa 1c1c7 cells incubated with 2-azido-3[125I]iodo-7,8-dibromo-dibenzo-p-dioxin ([125I]N3Br2DpD). The [125I]N3Br2DpD-labeled cytosolic fraction was subjected to chemical cross-linking with dimethyl pimelimidate and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Chemical cross-linking of the cytosolic form of the AhR revealed monomeric (97 kDa), dimeric (185 kDa), trimeric (281 kDa), and tetrameric (327 kDa) complexes. In a time course of exposure to the cross-linking reagent, the largest form given above became the predominant AhR form observed in the cytosolic extracts. The 327 kDa cytosolic species apparently consists of a 97 kDa AhR, an approximately 88 kDa protein, an approximately 96 kDa protein, and an approximately 46 kDa protein. Nuclear extracts from [125I]N3Br2DpD-labeled Hepa 1c1c7 cells were applied to sucrose density gradients. The 6 S nuclear receptor peak fractions were pooled and subjected to chemical cross-linking. Analysis by SDS-PAGE revealed a monomeric (97 kDa) ligand binding protein and a dimeric (182 kDa) complex. This would suggest that the nuclear 6 S AhR consists of a 97 kDa AhR and an approximately 85 kDa protein. These findings would indicate that the AhR exists in cytosol as a tetrameric species, while in the nucleus the AhR exists as a heterodimer.     

Rapid purification and structural study of DNA topoisomerase I from human Burkitt lymphoma Raji cells

We have developed a rapid purification method for DNA topoisomerase I from Raji cells, a human Burkitt lymphoma cell line, using ammonium sulfate fractionation followed by chromatography on a Mono S column (FPLC, Pharmacia). By this method, the enzyme could be purified to near homogeneity within one day. Electrophoresis on sodium dodecyl sulfate polyacrylamide gel revealed that the final preparation is mainly composed of a 100-kDa protein. The major enzyme activity sedimented through a glycerol density gradient at 5.7S, accompanied with a minor peak at 8.7S. The former may correspond to the monomer of the 100-kDa polypeptide, and the latter, to its dimeric form. The gel filtration study of the crude extract revealed an active molecular species of 200 kDa, in addition to 100 kDa, and lower molecular weight forms. These results suggest that DNA topoisomerase I is largely in monomeric form, but also has a minor population of the dimeric form.     

Purification and properties of the catalytic domain of human 3-hydroxy-3-methylglutaryl-CoA reductase expressed in Escherichia coli

Three fragments of the cDNA encoding human 3-hydroxy-3-methylglutaryl-CoA reductase, all incorporating the majority of the catalytic domain of the protein, were subcloned into Escherichia coli expression vectors containing the pL promoter. The two larger expressed fragments (58 and 52 kDa) were soluble and had enzymatic activity, while the smallest (48 kDa) was insoluble. The two active fragments were purified by a combination of conventional techniques and affinity chromatography. A number of properties of the two enzymes were compared including specific activity, kinetic parameters, relative solubility, and cold lability. The 52-kDa enzyme was observed to change from a dimeric to monomeric form and to lose activity at 4 degrees C. In contrast, the 58-kDa enzyme was found to be much less cold labile, and was dimeric at both 20 and 4 degrees C. In order to resolve the number of subunits required to form an active site, the number of inhibitor binding sites for a known inhibitor was determined to be one per subunit in the 58-kDa enzyme.     

Surface display of a functional single-chain Fv antibody on staphylococci.

Two different host-vector expression systems designed for cell surface display of chimeric receptors on Staphylococcus xylosus and Staphylococcus carnosus have been evaluated for surface display of a mouse immunoglobulin G1(kappa) [IgG1(kappa)] anti-human IgE single-chain Fv (scFv) antibody fragment. To achieve surface anchoring of the chimeric receptors containing the scFv, the cell surface attachment regions from Staphylococcus aureus protein A were used in both expression systems. The different chimeric receptors could be recovered from cell wall extracts of both S. xylosus and S. carnosus, and surface localization was demonstrated by taking advantage of a serum albumin-binding reporter region present within the two types of receptors. In addition, the two different recombinant staphylococci carrying hybrid receptors containing the scFv were demonstrated to react with the antigen, which was human IgE, in whole-cell enzyme-linked immunosorbent assays. This is the first report of an antibody fragment expressed in a functional form anchored to the surface of gram-positive bacteria. The potential use of recombinant gram-positive bacteria as whole-cell diagnostic devices or alternatives to filamentous phages for surface display of scFv libraries is discussed.     

Exo-inulinase of Aspergillus niger N402: A hydrolytic enzyme with significant transfructosylating activity

The purified exo-inulinase enzyme of Aspergillus niger N402 (AngInuE; heterologously expressed in Escherichia coli) displayed a sucrose:inulin (S/I) hydrolysis ratio of 2.3, characteristic for a typical exo-inulinase. The enzyme also had significant transfructosylating activity with increasing sucrose concentrations, producing various oligosaccharides. The AngInuE protein molecular mass was 57 kDa, close to the calculated value for the mature protein. AngInuE thus was active as a monomeric, non-glycosylated protein. Contradictory data on hydrolysis/transfructosylation activity ratios have been published for the (almost) identical (but monomeric or dimeric and glycosylated) exo-inulinases of other aspergilli. Our data clearly show that the AngInuE enzyme, produced in and purified from E. coli, is a broad specificity exo-inulinase that also has significant transfructosylating activity with sucrose. Analysis of site-directed mutants of AngInuE showed that the glycoside hydrolase family 32 conserved domain G is important for catalytic efficiency, with a clear role in hydrolysis of both sucrose and fructans.     

食品级分泌表达载体的构建及报告蛋白在乳酸乳球菌中的表达

为构建乳酸乳球菌食品级分泌表达载体,通过PCR扩增质粒pMG36e的p32启动子片段及乳酸乳球菌MG1363未知分泌蛋白(Usp45)基因的核糖体结合位点、分泌信号肽和成熟肽前11个氨基酸的编码序列(SPusp45),克隆到食品级载体pSH91中,构建食品级分泌性表达载体pSQ;克隆报告基因金黄色葡萄球菌核酸酶(NucA)成熟肽的编码序列nucA到pSQ中分泌信号后,转化乳酸乳球菌MBP71,构建了乳酸乳球菌食品级分泌性表达系统L lactis/pSQ-nucA;通过TB-D法和酶谱法检测L lactis/pSQ-nucA的表达形式、表达量并与以前构建的L lactis/pSQZ-nucA系统表达能力进行比较,结果发现L lactis/pSQ-nucA能够分泌性表达NucA,分泌性表达的NucA量大约是胞内NucA的10倍;L lactis/pSQ-nucA的表达量高于lactis/pSQZ-nucA.为进一步目的蛋白的的分泌性表达及食品级疫苗的研制奠定了基础.     

Cell wall sorting of lipoproteins in Staphylococcus aureus.

Many surface proteins are thought to be anchored to the cell wall of gram-positive organisms via their C termini, while the N-terminal domains of these molecules are displayed on the bacterial surface. Cell wall anchoring of surface proteins in Staphylococcus aureus requires both an N-terminal leader peptide and a C-terminal cell wall sorting signal. By fusing the cell wall sorting of protein A to the C terminus of staphylococcal beta-lactamase, we demonstrate here that lipoproteins can also be anchored to the cell wall of S. aureus. The topology of cell wall-anchored beta-lactamase is reminiscent of that described for Braun's murein lipoprotein in that the N terminus of the polypeptide chain is membrane anchored whereas the C-terminal end is tethered to the bacterial cell wall.     

Gene disruption identifies a 290 kDa cell-surface polypeptide conferring hydrophobicity and coaggregation properties in Streptococcus gordonii

The C-terminal coding region of the gene (denoted cshA) encoding a high-molecular-mass (290 kDa) cell-surface polypeptide in the oral bacterium Streptococcus gordonii was cloned and sequenced. Insertion of ermAM into the S. gordonii chromosome at the 3' end of the coding region of cshA led to the production of isogenic mutants that secreted a truncated form (260 kDa) of the CshA polypeptide into the growth medium. Mutants had reduced cell-surface hydrophobicity and were impaired in their ability to coaggregate with oral actinomyces. The results identify a carboxyl terminus-anchored cell-surface protein determinant of hydrophobicity and coaggregation in S. gordonii.     

Exo-inulinase of Aspergillus niger N402: A hydrolytic enzyme with significant transfructosylating activity

The purified exo-inulinase enzyme of Aspergillus niger N402 (AngInuE; heterologously expressed in Escherichia coli) displayed a sucrose:inulin (S/I) hydrolysis ratio of 2.3, characteristic for a typical exo-inulinase. The enzyme also had significant transfructosylating activity with increasing sucrose concentrations, producing various oligosaccharides. The AngInuE protein molecular mass was 57 kDa, close to the calculated value for the mature protein. AngInuE thus was active as a monomeric, non-glycosylated protein. Contradictory data on hydrolysis/transfructosylation activity ratios have been published for the (almost) identical (but monomeric or dimeric and glycosylated) exo-inulinases of other aspergilli. Our data clearly show that the AngInuE enzyme, produced in and purified from E. coli, is a broad specificity exo-inulinase that also has significant transfructosylating activity with sucrose. Analysis of site-directed mutants of AngInuE showed that the glycoside hydrolase family 32 conserved domain G is important for catalytic efficiency, with a clear role in hydrolysis of both sucrose and fructans.     

Sorting of protein A to the staphylococcal cell wall.

The cell wall of gram-positive bacteria can be thought of as representing a unique cell compartment, which contains anchored surface proteins that require specific sorting signals. Some biologically important products are anchored in this way, including protein A and fibronectin binding protein of Staphylococcus aureus and streptococcal M protein. Studies of staphylococcal protein A and Escherichia coli alkaline phosphatase show that the signal both necessary and sufficient for cell wall anchoring consists of an LPXTGX motif, a C-terminal hydrophobic domain, and a charged tail. These sequence elements are conserved in many surface proteins from different gram-positive bacteria. We propose the existence of a hitherto undescribed sorting mechanism that positions proteins on the surface of gram-positive bacteria.     

Staphylococcus aureus sortase A exists as a dimeric protein in vitro

We report the first direct observation of the self-association behavior of the Staphylococcus aureus sortase A (SrtA) transpeptidase. Formation of a SrtA dimer was observed under native conditions by polyacrylamide gel electrophoresis and fast protein liquid chromatography (FPLC). Subsequent peptide mass fingerprinting and protein sequencing experiments confirmed the dimeric form of the SrtA protein. Furthermore, SrtA can be selectively cross-linked both in vitro and in Escherichia coli. Multiple samples of enzyme were subjected to analytical sedimentation equilibrium ultracentrifugation to obtain an apparent Kd for dimer formation of about 55 microM. Finally, enzyme kinetic studies suggested that the dimeric form of SrtA is more active than the monomeric enzyme. Discovery of SrtA dimerization may have significant implications for understanding microbial physiology and developing new antibiotics.     

Characterization of Streptococcus suis Genes Encoding Proteins Homologous to Sortase of Gram-Positive Bacteria

Many surface proteins which are covalently linked to the cell wall of gram-positive bacteria have a consensus C-terminal motif, Leu-Pro-X-Thr-Gly (LPXTG). This sequence is cleaved, and the processed protein is attached to an amino group of a cross-bridge in the peptidoglycan by a specific enzyme called sortase. Using the type strain of Streptococcus suis, NCTC 10234, we found five genes encoding proteins that were homologous to sortases of other bacteria and determined the nucleotide sequences of the genetic regions. One gene, designated srtA, was linked to gyrA, as were the sortase and sortase-like genes of other streptococci. Three genes, designated srtB, srtC, and srtD, were tandemly clustered in a different location, where there were three segments of directly repeated sequences of approximately 110 bp in close vicinity. The remaining gene, designated srtE, was located separately on the chromosome with a pseudogene which may encode a transposase. The deduced amino acid sequences of the five Srt proteins showed 18 to 31% identity with the sortases of Streptococcus gordonii and Staphylococcus aureus, except that SrtA of S. suis had 65% identity with that of S. gordonii. Isogenic mutants deficient for srtA, srtBCD, or srtE were generated by allelic exchanges. The protein fraction which was released from partially purified cell walls by digestion with N-acetylmuramidase was profiled by two-dimensional gel electrophoresis. More than 15 of the protein spots were missing in the profile of the srtA mutant compared with that of the parent strain, and this phenotype was completely complemented by srtA cloned from S. suis. Four genes encoding proteins corresponding to such spots were identified and sequenced. The deduced translational products of the four genes possessed the LPXTG motif in their C-terminal regions. On the other hand, the protein spots that were missing in the srtA mutant appeared in the profiles of the srtBCD and srtE mutants. These results provide evidence that the cell wall sorting system involving srtA is also present in S. suis.     

Comparison of transformation protocols in Streptococcus gordonii and evaluation of native promoter strength using a multiple-copy plasmid

An active area of research in the development of Streptococcus gordonii for use as a bacterial commensal vector involves the identification and utilization of strong promoters for high-level expression of heterologous products. Escherichia coli plasmid vectors containing different streptococcal promoters often fail to become established in E. coli for unknown reasons. Therefore, it is desirable at times to transform S. gordonii, which is naturally competent, with small quantities of nascently ligated DNA without using E. coli first to amplify or screen the product. By comparing the efficiency of two methods used to induce competence in S. gordonii, it was shown that the use of a synthetic competence stimulating peptide substantially enhanced plasmid uptake by S. gordonii. We amplified the amylase-binding protein (abpA) promoter from the S. gordonii genome and, using a synthetic peptide to induce competence, directly introduced plasmid DNA containing this promoter into S. gordonii as an unamplified product of ligation. This plasmid facilitated abundant secretion of a heterologous product by S. gordonii. By assessing the levels of heterologous product secreted by two plasmid constructs, it was possible to evaluate the relative strength of two native promoters.     

The YSIRK-G/S motif of staphylococcal protein A and its role in efficiency of signal peptide processing

Many surface proteins of pathogenic gram-positive bacteria are linked to the cell wall envelope by a mechanism requiring a C-terminal sorting signal with an LPXTG motif. Surface proteins of Streptococcus pneumoniae harbor another motif, YSIRK-G/S, which is positioned within signal peptides. The signal peptides of some, but not all, of the 20 surface proteins of Staphylococcus aureus carry a YSIRK-G/S motif, whereas those of surface proteins of Listeria monocytogenes and Bacillus anthracis do not. To determine whether the YSIRK-G/S motif is required for the secretion or cell wall anchoring of surface proteins, we analyzed variants of staphylococcal protein A, an immunoglobulin binding protein with an LPXTG sorting signal. Deletion of the YSIR sequence or replacement of G or S significantly reduced the rate of signal peptide processing of protein A precursors. In contrast, cell wall anchoring or the functional display of protein A was not affected. The fusion of cell wall sorting signals to reporter proteins bearing N-terminal signal peptides with or without the YSIRK-G/S motif resulted in hybrid proteins that were anchored in a manner similar to that of wild-type protein A. The requirement of the YSIRK-G/S motif for efficient secretion implies the existence of a specialized mode of substrate recognition by the secretion pathway of gram-positive cocci. It seems, however, that this mechanism is not essential for surface protein anchoring to the cell wall envelope.     

Isolation and characterization of an unprocessed extracellular myeloperoxidase in HL-60 cell cultures

Extracellular myeloperoxidase of human myeloid leukemia HL-60 cells was purified to homogeneity from its culture supernatant by ammonium sulfate fractionation, CM-Sepharose column chromatography, and monoclonal antibody-Sepharose affinity column chromatography. The yield of enzyme activity was 38% that of the ammonium sulfate fraction. On sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the purified preparation gave a single band of approximately 84 kDa. Analysis of protein blot with antibodies specific for the light and heavy chains of myeloperoxidase indicated that the enzyme contained a light and a heavy chain in a single polypeptide. The amino-terminal amino acid sequence of the enzyme began at amino acid residue 155 of the 745-amino acid sequence predicted from myeloperoxidase cDNA, indicating that the enzyme consisted of 591 amino acids. Sucrose density gradient centrifugation of the enzyme showed that the enzyme was a monomeric form. In pulse-chase experiments on HL-60 cells with [35S]methionine, pulse-labeled myeloperoxidase precursors were shown to be processed to a light chain and a heavy chain of cellular enzyme. During a 3-day chase period, newly formed processed monomeric enzyme was converted to a dimeric form.