一株石油烃降解菌的细胞疏水性及其乳化性质

【目的】从新疆油田石油污染土壤中分离到一株在25 °C条件下利用烃类产生生物表面活性剂的菌株红球菌(Rhodococcus sp.) HL-6, 对其菌体细胞疏水性及所产表面活性剂进行研究。【方法】通过细胞粘附性、表面张力及乳化活性测定对菌株所产表面活性剂进行性质研究。【结果】菌株HL-6在亲水性和疏水性基质中均能产生生物表面活性剂, 在疏水性基质中可以将培养液表面张力由初始的62.487 mN/m降到30.667 mN/m, 培养液在pH 6?9及NaCl浓度1%?5%范围内乳化效果良好, 在4 °C到55 °C范围内乳化效果均为100%, 菌株对柴油的耐受能力很高, 在30%柴油浓度下依然生长良好并且有44%的乳化活性。【结论】HL-6菌株的细胞表面具有很强的疏水性, 这有助于菌体细胞对烃类的摄取。该菌株能够利用烃类基质生产生物表面活性剂, 可以明显降低培养液表面张力并且对石油烃具有良好的乳化作用。说明菌株HL-6能够适应海洋滩涂石油污染的环境, 并可用于严重石油污染区域的生物修复。     

Isolation and characterization of a biosurfactant‐producing Fusarium sp. BS‐8 from oil contaminated soil

This study reports characterization of a biosurfactant‐producing fungal isolate from oil contaminated soil of Missa Keswal oil field, Pakistan. It was identified as Fusarium sp. BS‐8 on the basis of macroscopic and microscopic morphology, and 18S rDNA gene sequence homology. The biosurfactant‐producing capability of the fungal isolates was screened using oil displacement activity, emulsification index assay, and surface tension (SFT) measurement. The optimization of operational parameters and culture conditions resulted in maximum biosurfactant production using 9% (v/v) inoculum at 30°C, pH 7.0, using sucrose and yeast extract, as carbon and nitrogen sources, respectively. A C:N ratio of 0.9:0.1 (w/w) was found to be optimum for growth and biosurfactant production. At optimal conditions, it attained lowest SFT (i.e., 32 mN m^?1) with a critical micelle concentration of ≥ 1.2 mg mL^?1. During 5 L shake flask fermentation experiments, the biosurfactant productivity was 1.21 g L^?1 pure biosurfactant having significant emulsifying index (E₂₄, 70%) and oil‐displacing activity (16 mm). Thin layer chromatography and Fourier transform infrared spectrometric analyses indicated a lipopeptide type of the biosurfactant. The Fusarium sp. BS‐8 has substantial potential of biosurfactant production, yet it needs to be fully characterized with possibility of relatively new class of biosurfactants. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1065–1075, 2014     

Isolation of biosurfactant-producing <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> RS29 from oil-contaminated soil and evaluation of different nitrogen sources in biosurfactant production

An efficient biosurfactant-producing native Pseudomonas aeruginosa RS29 has been isolated from crude oil contaminated soil. Isolation was followed by optimization of different factors to achieve maximum production of biosurfactant in terms of surface tension reduction (STR) and emulsification index (E24). The isolated strain produced highest biosurfactant in the presence of glycerol after 48 h of incubation at 37.5°C, with pH range of 7–8 and at salinity <0.8% (w/v). The extent of STR and the E24 of medium with different nitrogen sources were investigated and found to be maximal for sodium nitrate (26.3 mN/m, E24?=?80%) and potassium nitrate (26.4 mN/m, E24?=?79%). The production of biomass by the designated strain was found to be maximal in ammonium-nitrate-containing medium as compared to the other nitrogen sources. A kinetic study revealed that biosurfactant production is positively correlated with growth of P. aeruginosa, and highest STR was achieved (27.0 mN/m) after 44 h of growth. The biosurfactant was produced as a primary metabolite and 6 g/L crude biosurfactant was extracted by chloroform:methanol (2:1). The critical micelle concentration of the biosurfactant was 90 mg/L. The absorption bands of the FTIR spectra confirmed the rhamnolipid nature of the biosurfactant. The biosurfactant was thermostable (up to 121°C for 15 min) and could withstand a wide range of pH (2–10) and NaCl concentration (2%–10% w/v). The extracted biosurfactant had good foaming and emulsifying activities and was of satisfactory quality in terms of stability (temperature, pH and salinity) and foaming activity.     

The Potential of Bacterial Isolates for Emulsification with a Range of Hydrocarbons

A study was undertaken to investigate the distribution of biosurfactant producing and crude oil degrading bacteria in the oil contaminated environment. This research revealed that hydrocarbon contaminated sites are the potent sources for oil degraders. Among 32 oil degrading bacteria isolated from ten different oil contaminated sites of gasoline and diesel fuel stations, 80% exhibited biosurfactant production. The quantity and emulsification activity of the biosurfactants varied. Pseudomonas sp. DS10‐129 produced a maximum of 7.5 ± 0.4 g/l of biosurfactant with a corresponding reduction in surface tension from 68 mN/m to 29.4 ± 0.7 mN/m at 84 h incubation. The isolates Micrococcus sp. GS2‐22, Bacillus sp. DS6‐86, Corynebacterium sp. GS5‐66, Flavobacterium sp. DS5‐73, Pseudomonas sp. DS10‐129, Pseudomonas sp. DS9‐119 and Acinetobacter sp. DS5‐74 emulsified xylene, benzene, n‐hexane, Bombay High crude oil, kerosene, gasoline, diesel fuel and olive oil. The first five of the above isolates had the highest emulsification activity and crude oil degradation ability and were selected for the preparation of a mixed bacterial consortium, which was also an efficient biosurfactant producing oil emulsifying and degrading culture. During this study, biosurfactant production and emulsification activity were detected in Moraxella sp., Flavobacterium sp. and in a mixed bacterial consortium, which have not been reported before.     

A practical approach to biosurfactant production using nonaseptic fermentation of mixed cultures

Non-aseptic production of biosurfactant from molasses by a mixed culture was investigated in stirred batch reactors. Biosurfactant production was quantified by surface tension reduction, critical micelle dilution (CMD), and emulsification capacity (EC). Biosurfactant production was directly correlated with biomass production, and was improved by pH control and addition of yeast extract. Centrifugation of the whole broth increased emulsifying capacity and reduced surface tension. Acidification of the whole broth increased the emulsification capacity but reduced the apparent biosurfactant concentration (CMD), without affecting the surface tension. The emulsification capacity of the cell-free broth was equivalent to that of a 100 mg/L solution of sodium dodecyl sulfate. The emulsification capacity of the whole broth and cell-free broth were reduced by about 50% at and above NaCl concentrations of 100mM. Preliminary characterization suggests that the biosurfactant activity is primarily associated with one or more protease-sensitive species, released from cells in larger quantities after more vigorous centrifugation.     

一株产生脂肽的枯草芽孢杆菌的分离鉴定及脂肽对原油的作用

从大庆油田地层水中分离到一组能高效产生生物表面活性剂的菌株,采用sfp基因PCR鉴定的方法从中分离到一株芽孢杆菌ZW-3,该菌株能够产生大量表面活性物质,采用细菌生理生化鉴定结合16S rDNA序列的系统发育学分析确定该菌株为枯草芽孢杆菌(Bacillus subtilis),通过薄层层析色谱(TLC)、高效液相色谱(HPLC)分析其代谢产物,初步鉴定为脂肽(Lipopeptide);该脂肽生物表面活性剂理化性质显示它能使培养基的表面张力从68.92mN/m降低25.19mN/m、原油/水的界面张力从23.53mN/m降低到4.57mN/m,与1.8%的NaOH溶液复配可以将油水界面张力降低到1.2×10-3 mN/m,其临界胶束浓度为33.3mg/L(3.24×10-5 mol/L),并具有较好的乳化活性和发泡性能,说明该菌株代谢的脂肽生物表面活性剂在提高石油采收率中具有广泛的应用前景.     

Inoculation of 1-aminocyclopropane-1-carboxylate deaminase–producing bacteria along with biosurfactant application enhances the phytoremediation efficiency of Medicago sativa in hydrocarbon-contaminated soils

Phytoremediation efficiency of Alfa alfa (Medicago sativa) was evaluated in hydrocarbon-contaminated soil with the combined application of 1-aminocyclopropane-1-carboxylate (ACC) deaminase–producing Bacillus sp. PVMX4 and an isolated biosurfactant from this strain. Results on the plant growth–promoting (PGP) traits of Bacillus sp. PVMX4 revealed that phosphate (P) solubilization, indole-3-acetic acid (IAA) production, and ACC deaminase activity were not affected by low-concentration hydrocarbon amendment in the form of crude oil. Bacillus sp. PVMX4 was able to utilize crude oil as a sole carbon source in mineral salt medium (MSM), and this strain synthesized significant quantities of biosurfactant in growth medium quantified by an emulsification index of 69.2 EI_24% and surface tension reduction of 26.2 mN/m at the end of the experimental period. Biosurfactant, when partially purified and characterized by thin-layer chromatography (TLC) and Fourier transform infrared spectroscopy (FT-IR), revealed it to be a lipopeptide-type biosurfactant. Pilot-scale phytoremediation studies conducted under growth chamber conditions in hydrocarbon-contaminated soil using Medicago sativa along with combined application of ACC deaminase–containing bacteria and biosurfactant recorded 76.4% hydrocarbon degradation.     

Isolation and characterization of biosurfactant production under extreme environmental conditions by alkali-halo-thermophilic bacteria from Saudi Arabia

Twenty three morphologically distinct microbial colonies were isolated from soil and sea water samples, which were collected from Jeddah region, Saudi Arabia for screening of the most potent biosurfactant strains. The isolated bacteria were selected by using different methods as drop collapse test, oil displacement test, blue agar test, blood hemolysis test, emulsification activity and surface tension. The results showed that the ability of Virgibacillus salarius to grow and reduce surface tension under a wide range of pH, salinities and temperatures gives bacteria isolate an advantage in many applications such as pharmaceutical, cosmetics, food industries and bioremediation in marine environment. The biosurfactant production by V. salarius decreased surface tension and emulsifying activity (30 mN/m and 80%, respectively). In addition to reducing the production cost of biosurfactants by tested several plant-derived oils such as jatropha oil, castor oils, jojoba oil, canola oil and cottonseed oil. In this respect the feasibility to reusing old frying oil of sunflower for production rhamnolipids and sophorolipids, their use that lead to solve many ecological and industrial problems.     

A Comparative Study on Biosurfactant Activity of Crude Oil–Degrading Bacteria and Its Correlation to Total Petroleum Hydrocarbon Degradation

In this study, 11 bacteria isolated from Tapis crude oil–contaminated sites were identified by using biochemical tests and 16S rDNA gene sequencing. Their abilities to biodegrade Tapis crude oil was determined by gas chromatography before they were further screened for biosurfactant activity by employing qualitative (blood agar hemolysis, microplate assay, drop-collapse test), semiquantitative (emulsification formation), and quantitative (surface tension measurement) methods. Four isolates, namely, Acinetobacter baumanii UKMP-12T, Pseudomonas aeruginosa UKMP-14T, Rhodococcus sp. UKMP-5T, and Rhodococcus sp. UKMP-7T, exhibited high percentages in total petroleum hydrocarbon (TPH) degradation. A strong correlation between the emulsification index (E ₂₄) and surface tension measurement (r _s = +.866) as shown by Spearman rank correlation analysis suggested that these two methods were more reliable to predict biosurfactant activity. The TPH removal was also positively correlated to the ability of bacterial isolates to reduce the surface tension of growth medium, as revealed by Pearson correlation test (r_p = +.886). In conclusion, not all the biosurfactant detection protocols employed were effective. Nevertheless, the measurement of surface tension and E ₂₄ determination provided a rather rapid, easy, reproducible, and accurate result in identifying bacteria with biosurfactant-producing ability.     

Studies on bioemulsifier production by Acinetobacter strains isolated from healthy human skin

AIMS: In recent years, interest has been growing in the search for novel bioemulsifiers. Many bacterial genera including Acinetobacter have been reported to produce bioemulsifiers. The present study aims to screen Acinetobacter isolates from healthy human skin for bioemulsifier production. Methods and Results: Acinetobacter junii SC14 produced maximum bioemulsifier in the presence of almond oil during stationary growth phase at 37 degrees C and pH 7.2. Partially purified, nondialysable bioemulsifier from SC14 was a proteoglycan. The protein and polysaccharide fractions resulted in 95.2% reconstitution of the emulsification activity. The role of esterase in the release of cell-bound emulsifier and the contribution of capsular polysaccharide to the emulsification activity were observed. CONCLUSION: Acinetobacter strains from human skin exhibited better emulsification activity than that by burn wound or soil isolates, owing to the inherent differences in chemical microenvironment of their habitats. SIGNIFICANCE AND IMPACT OF THE STUDY: Investigation of skin commensals, especially acinetobacters, would lead to the discovery of novel bioemulsifiers with interesting properties. Attempts of screening and strain improvement directed towards skin commensals will open up new avenues for strains producing bioemulsifier on a commercial scale.     

Use of response surface optimization for the production of biosurfactant from Rhodococcus spp. MTCC 2574

The production of biosurfactant from Rhodococcus spp. MTCC 2574 was effectively enhanced by response surface methodology (RSM). Rhodococcus spp. MTCC 2574 was selected through screening of seven different Rhodococcus strains. The preliminary screening experiments (one-factor at a time) suggested that carbon source: mannitol, nitrogen source: yeast extract and meat peptone and inducer: n-hexadecane are the critical medium components. The concentrations of these four media components were optimized by using central composite rotatable design (CCRD) of RSM. The adequately high R2 value (0.947) and F score 19.11 indicated the statistical significance of the model. The optimum medium composition for biosurfactant production was found to contain mannitol (1.6 g/L), yeast extract (6.92 g/L), meat peptone (19.65 g/L), n-hexadecane (63.8 g/L). The crude biosurfactant was obtained from methyl tert-butyl ether extraction. The yield of biosurfactant before and after optimization was 3.2 g/L of and 10.9 g/L, respectively. Thus, RSM has increased the yield of biosurfactant to 3.4-fold. The crude biosurfactant decreased the surface tension of water from 72 mN/m to 30.8 mN/m (at 120 mg L(-1)) and achieved a critical micelle concentration (CMC) value of 120 mg L(-1).     

泡菜水中产生物表面活性剂酵母菌株的筛选

[背景]由微生物产生的生物表面活性剂(biosurfactant,BS)具有低毒性、高效性、生物可降解性等多种特性,能在一定程度上缓解化学表面活性剂所造成的环境问题,因此筛选高产、安全的BS生产菌株备受研究者的关注.[目的]从泡菜水中筛选能代谢合成药食两用型BS的微生物菌株.[方法]运用滴崩法和排油圈法从传统发酵食品泡...     

Production and properties of a biosurfactant synthesized byArthrobacter protophormiae — an antarctic strain

This study reports the production of biosurfactant by a psychrophilic strain ofArthrobacter protophormiae during growth on an immiscible carbon source, w-hexadecane. The biosurfactant reduces the surface tension of the medium from 68.0 mN/m to 30.60 mN/m and exhibits good emulsification activity. The strain could grow and produce biosurfactant in the presence of high NaCl concentrations (10.0 to 100.0 g/1). Although the biosurfactant was isolated by growing the organism under psychrophilic conditions (10‡C) it exhibited stable activity over a wide range of temperature (30‡C to 100‡C). It retained its surface-active properties at p^H2 to 12. The biosurfactant was effective in recovering up to 90% of residual oil from an oil saturated sandpack column, indicating its potential value in enhanced oil recovery.     

Rhamnolipid production using Shewanella seohaensis BS18 and evaluation of its efficiency along with phytoremediation and bioaugmentation for bioremediation of hydrocarbon contaminated soils

Abstract

This study reports the combined use of a rhamnolipid type biosurfactant (BS) along with phytoremediation and bioaugmentation (BA) for bioremediation of hydrocarbon-contaminated soils. Bacterial isolates obtained from hydrocarbon contaminated soil were screened for rhamnolipid production and isolate BS18, identified as Shewanella seohaensis, was selected for bioremediation experiments. Growth of BS18 in mineral salt medium (MSM) with diesel oil as the carbon source showed a maximum biomass of 8.2?g L^?1, rhamnolipid production of 2.2?mg g^?1 cell dry weight, surface tension reduction of 28.6?mN/m and emulsification potential (EI₂₄%) of 65.6. Characterization of rhamnolipid based on Fourier transmittance infrared (FTIR) analysis confirmed the presence of OH, CH₂/CH₃, C=O, and COO stretching vibrations, respectively, which are distinctive features of rhamnolipid type BSs. In bioremediation experiments, the lowest hydrocarbon concentration of 2.1?mg g^?1 of soil for non-sterilized soil and 4.3?mg g^?1 of soil for sterilized soil was recorded in the combined application of rhamnolipid, phytoremediation, and BA. This treatment also yielded the highest hydrocarbon degrading bacterial population (6.4 Log Cfu g^?1 of soil), highest plant biomass (8.3?g dry weight plant^?1), and the highest hydrocarbon uptake (512.3?mg Kg^?1 of plant).     

Screening of biosurfactant-producing Bacillus strains using glycerol from the biodiesel synthesis as main carbon source

Glycerol, a co-product of biodiesel production, was evaluated as carbon source for biosurfactant production. For this reason, seven non-pathogenic biosurfactant-producing Bacillus strains, isolated from the tank of chlorination at the Wastewater Treatment Plant at Federal University of Ceara, were screened. The production of biosurfactant was verified by determining the surface tension value, as well as the emulsifying capacity of the free-cell broth against soy oil, kerosene and N-hexadecane. Best results were achieved when using LAMI005 and LAMI009 strains, whose biosurfactant reduced the surface tension of the broth to 28.8?±?0.0 and 27.1?±?0.1?mN?m(-1), respectively. Additionally, at 72?h of cultivation, 441.06 and 267.56?mg?L(-1) of surfactin were produced by LAMI005 and LAMI009, respectively. The biosurfactants were capable of forming stable emulsions with various hydrocarbons, such as soy oil and kerosene. Analyses carried out with high performance liquid chromatography (HPLC) showed that the biosurfactant produced by Bacillus subtilis LAMI009 and LAMI005 was compatible with the commercially available surfactin standard. The values of minimum surface tension and the CMC of the produced biosurfactant indicated that it is feasible to produce biosurfactants from a residual and renewable and low-cost carbon source, such as glycerol.     

Characterization of new biosurfactant produced by Klebsiella sp. Y6-1 isolated from waste soybean oil

To obtain predominant bacteria degrading crude oil, we isolated some bacteria from waste soybean oil. Isolated bacterial strain had a marked tributyrin (C4:0) degrading activity as developed clear zone around the colony after incubation for 24h at 37 degrees C. It was identified as Klebsiella sp. Y6-1 by analysis of 16S rRNA gene. Crude biosurfactant was extracted from the culture supernatant of Klebsiella sp. Y6-1 by organic solvent (methanol:chloroform:1-butanol) after vacuum freeze drying and the extracted biosurfactant was purified by silica gel column chromatography. When the purified biosurfactant dropped, it formed degrading zone on crude oil plate. When a constituent element of the purified biosurfactant was analyzed by TLC and SDS-PAGE, it was composed of peptides and lipid. The emulsification activity and stability of biosurfactant was measured by using hydrocarbons and crude oil. The emulsification activity and stability of the biosurfactant showed better than the chemically synthesized surfactant. It reduced the surface tension of water from 72 to 32 mN/m at a concentration of 40 mg/l.     

Optimization of low-cost biosurfactant production from agricultural residues through response surface methodology

Biosurfactants are surface-active compounds capable of reducing surface tension and interfacial tension. Biosurfactants are produced by various microorganisms. They are promising replacements for chemical surfactants because of biodegradability, nontoxicity, and their ability to be produced from renewable sources. However, a major obstacle in producing biosurfactants at the industrial level is the lack of cost-effectiveness. In the present study, by using corn steep liquor (CSL) as a low-cost agricultural waste, not only is the production cost reduced but a higher production yield is also achieved. Moreover, a response surface methodology (RSM) approach through the Box–Behnken method was applied to optimize the biosurfactant production level. The results found that biosurfactant production was improved around 2.3 times at optimum condition when the CSL was at a concentration of 1.88 mL/L and yeast extract was reduced to 25 times less than what was used in a basic soybean oil medium (SOM). The predicted and experimental values of responses were in reasonable agreement with each other (Pred-R² = 0.86 and adj-R² = 0.94). Optimization led to a drop in raw material price per unit of biosurfactant from $47 to $12/kg. Moreover, the biosurfactant product at a concentration of 84 mg/L could lower the surface tension of twice-distilled water from 72 mN/m to less than 28 mN/m and emulsify an equal volume of kerosene by an emulsification index of (E24) 68% in a two-phase mixture. These capabilities made these biosurfactants applicable in microbial enhanced oil recovery (MEOR), hydrocarbon remediation, and all other petroleum industry surfactant applications.     

Isolation and characterization of a biosurfactant from Deinococcus caeni PO5 using jackfruit seed powder as a substrate

Biosurfactant-producing bacteria were isolated from various sources in the south of Thailand. Isolates were screened for biosurfactant production using jackfruit seed powder (JSP) as a novel and promising substrate. The highest biosurfactant activity was obtained with a bacterial strain which was identified by 16S rRNA gene sequence analysis as Deinococcus caeni PO5. D. caeni PO5 was able to grow and reduce the surface tension of the culture supernatant from 67.0 to 25.0 mN/m after 87 h of cultivation when 40 g/l of JSP and 1 g/l of commercial monosodium glutamate were used as carbon and nitrogen sources, respectively. The biosurfactant obtained by ethyl acetate extraction showed high surface tension reduction (47.0 mN/m), a small critical micelle concentration value (8 mg/l), thermal and pH stability with respect to surface tension reduction and emulsification activity, and a high level of salt tolerance. Chemical characterization by biochemical testing, Fourier transform infrared spectroscopy, and mass spectra revealed that the obtained biosurfactant was a glycolipid-type biosurfactant. The obtained biosurfactant was capable of forming stable emulsions with various hydrocarbons and had the ability to enhance oil recovery, the solubility of polyaromatic hydrocarbons, heavy metal removal, and antimicrobial activity.     

一株来自大西洋表层海水的烷烃降解菌Gordonia sp. S14-10的分离鉴定及其降解相关特性的分析

摘要：【目的】本研究的目的是从大西洋表层海水分离筛选新的烷烃降解菌,了解其降解基因及降解特性,为海洋石油污染的生物治理提供材料。【方法】以柴油与原油作为混合碳源从大西洋表层海水样品中富集、并分离筛选出降解能力较强的烷烃降解菌。根据16S rRNA基因和其看家基因secA1序列确定其系统进化地位。分析了烷烃降解范围、表面活性剂产生能力及其他生理生化特性;利用已报道的兼并引物进行了烷烃羟化酶基因的PCR扩增及系统进化分析。【结果】分离筛选得到1株能够降解C10?C36直链烷烃的菌株S14-10。经16S rR     

Isolation and functional characterization of a biosurfactant produced by a new and promising strain of Oleomonas sagaranensis AT18

Biosurfactant-producing bacteria were isolated from mangrove sediment in southern Thailand. Isolates were screened for biosurfactant production by using the surface tension test. The highest reduction of surface tension was achieved with a bacterial strain which was identified by 16S rRNA gene sequencing as Oleomonas sagaranensis AT18. It has also been investigated using different carbon and nitrogen sources. It showed that the strain was able to grow and reduce the surface tension of the culture supernatant to 25?mN/m. In all 5.30?g of biosurfactant yield was obtained after 54?h of cultivation by using molasses and NaNO(3) as carbon and nitrogen sources, respectively. The biosurfactant recovery by chloroform:methanol extraction showed a small critical micelle concentration value (8?mg/l), thermal and pH stability with respect to surface tension reduction. It also showed emulsification activity and a high level of salt concentration. The biosurfactant obtained was confirmed as a glycolipid by using a biochemical test, FT-IR and mass spectra. The crude biosurfactant showed a broad spectrum of antimicrobial activity and also had the ability to emulsify oil and enhance PAHs solubility.