Structural Changes of Ag+�CNa+ Annealed Ion-Exchanged Silicate Glasses Scanning Electron Microscopy, Far-Infrared Reflectivity, UV-Visible Absorption, and TEM Investigation

The effect of silver ionic exchange on the glass structure in a molten bath at 350 °C was presented in a previous paper Catan et al. [1] (J NonCryst Solids 354:1026–1031, 2008). In this paper, the experiment is driven for a temperature near 310 °C, the eutectic of a 10% AgNO₃–NaNO₃ molten salt. The various exchanged silicate glasses are further annealed to obtain silver particles in the matrix. Infrared spectroscopy combined with UV/Visible spectroscopy and scanning electron microscopy analysis allowed to correlate the silver-ion penetration and particle formation with the degree of polymerisation of the silicate network. The previous results have demonstrated an insertion of silver ions in the glass structure that is about 10% higher than the departure of sodium ions. Infrared results obtained after ion exchange have proved that local alterations lead to a higher degree of depolymerisation of the silicate network. Here, the annealing of the samples promotes the formation of silver nanoparticles, the infrared measurements prove that the aggregation is correlated to a repolymerisation of the silicate network. Transmission electron microscopy (TEM) is used to evaluate the distribution size of the silver particles after annealing and to correlate it to the evolution of the absorption curves. The TEM observations prove that the particle are below the incident wavelength but shape factor could lead to scattering contribution when particle growths and to absorption spectra evolution.     

Plasmonic Coupling in Er3+:Au Tellurite Glass

In this paper, we report on luminescence and absorbance effects of Er⁺³:Au-doped tellurite glasses synthesized by a melting-quenching and heat treatment technique. After annealing times of 2.5, 5.0, 7.5, and 10.0 h, at 300 °C, the gold nanoparticles (GNP) effects on the Er⁺³ are verified from luminescence spectra and the corresponding levels lifetime. The localized surface plasmon resonance around 800 nm produced a maximum fluorescence enhancement for the band ranging from 800 to 840 nm, corresponding to the transitions ⁴H_11/2 → ⁴I_13/2 (805 nm) and ⁴S_3/2 → ⁴I_13/2 (840 nm), with annealing time till 7.5 h. The measured lifetime of the levels ⁴H_11/2 and ⁴S_3/2 confirmed the lifetime reduction due to the energy transfer from the GNP to Er⁺³, causing an enhanced photon emission rate in these levels.     

Highly Sensitive Resonance Scattering Detection of DNA Hybridization Using Aptamer-Modified Gold Nanopaticle as Catalyst

Gold nanoparticle particles in size of 10 nm were used to label the thiol-modified single-stranded DNA aptamer (SH-ssDNA) to obtain an aptamer-modified gold nanoparticle probe (AussDNA) for target DNA (tDNA). In pH 7.4 NaH₂PO₄–Na₂HPO₄ buffer solution, the hybridization reaction between AussDNA and tDNA took place to form larger aptamer-modified gold nanoparticle cluster complex. The excess aptamer-modified gold nanoparticle probe in the supernatant solutions was obtained by centrifuging and can be used as nanocatalyst for the 0.276 mmol/L CuSO₄-65.4 mmol/L potassium-sodium tartrate-0.37 mmol/L glucose system at 70 °C. The cubic Cu₂O particles generated by the nanocatalytic reducing exhibit a strong resonance scattering (RS) peak at 620 nm. In the selected conditions, the RS intensity at 620 nm decreased with addition of tDNA, and the decreased intensity ΔI _{620 nm} is proportional to tDNA concentration (C _tDNA) from 0.12 to 72 pM, with regress equation of ΔI _620 nm = 1.29C _tDNA + 4.05, correlation coefficient of 0.9917, and detection limit of 0.084 pM tDNA.     

The Relative Rates of Thiol–Thioester Exchange and Hydrolysis for Alkyl and Aryl Thioalkanoates in Water

This article reports rate constants for thiol–thioester exchange (k _ex), and for acid-mediated (k _a), base-mediated (k _b), and pH-independent (k _w) hydrolysis of S-methyl thioacetate and S-phenyl 5-dimethylamino-5-oxo-thiopentanoate—model alkyl and aryl thioalkanoates, respectively—in water. Reactions such as thiol–thioester exchange or aminolysis could have generated molecular complexity on early Earth, but for thioesters to have played important roles in the origin of life, constructive reactions would have needed to compete effectively with hydrolysis under prebiotic conditions. Knowledge of the kinetics of competition between exchange and hydrolysis is also useful in the optimization of systems where exchange is used in applications such as self-assembly or reversible binding. For the alkyl thioester S-methyl thioacetate, which has been synthesized in simulated prebiotic hydrothermal vents, k _a = 1.5 × 10⁻⁵ M⁻¹ s⁻¹, k _b = 1.6 × 10⁻¹ M⁻¹ s⁻¹, and k _w = 3.6 × 10⁻⁸ s⁻¹. At pH 7 and 23°C, the half-life for hydrolysis is 155 days. The second-order rate constant for thiol–thioester exchange between S-methyl thioacetate and 2-sulfonatoethanethiolate is k _ex = 1.7 M⁻¹ s⁻¹. At pH 7 and 23°C, with [R″S(H)] = 1 mM, the half-life of the exchange reaction is 38 h. These results confirm that conditions (pH, temperature, pK _a of the thiol) exist where prebiotically relevant thioesters can survive hydrolysis in water for long periods of time and rates of thiol–thioester exchange exceed those of hydrolysis by several orders of magnitude.     

Fabrication and characterization of silver nanoparticle and its potential antibacterial activity

In the present research silver nanoparticle was fabricated by chemical reduction of silver salt (Silver nitrate, AgNO₃) solution. Sodium citrate was used as a reducer. The formation of silver nanoparticle was observed visually by color change (greenish yellow). The surface plasmon resonance peak in absorption spectra of silver nanoparticle showed an absorption maximum at 420 nm in UV-VIS spectrometry. The X-ray diffraction pattern showed the presence of sharp reflections at 111, 200, 220, and 311. This would indicate the presence of silver nanoparticle. The scanning electron micrograph revealed that the average size of silver nanoparticle was 21.22 ± 5.17 nm. Silver nanoparticle exhibited better antimicrobial activity against Staphylococcus aureus than the other bacterial pathogens. The correlation coefficient between silver nanoparticles and selected bacterial pathogens revealed that there is a strong negative correlation with Escherichia coli, S. aureus and Klebsiella pneumonia (r = −0.975, −0.993, and −0.998, respectively).     

The influence of nanoscopically thin silver films on bacterial viability and attachment

The physicochemical and bactericidal properties of thin silver films have been analysed. Silver films of 3 and 150 nm thicknesses were fabricated using a magnetron sputtering thin-film deposition system. X-ray photoelectron and energy dispersive X-ray spectroscopy and atomic force microscopy analyses confirmed that the resulting surfaces were homogeneous, and that silver was the most abundant element present on both surfaces, being 45 and 53 at.% on the 3- and 150-nm films, respectively. Inductively coupled plasma time of flight mass spectroscopy (ICP-TOF-MS) was used to measure the concentration of silver ions released from these films. Concentrations of 0.9 and 5.2 ppb were detected for the 3- and 150-nm films, respectively. The surface wettability of the films remained nearly identical for both film thicknesses, displaying a static water contact angle of 95°, while the surface free energy of the 150-nm film was found to be slightly greater than that of the 3-nm film, being 28.8 and 23.9 mN m⁻¹, respectively. The two silver film thicknesses exhibited statistically significant differences in surface topographic profiles on the nanoscopic scale, with R _a, R _q and R _max values of 1.4, 1.8 and 15.4 nm for the 3-nm film and 0.8, 1.2 and 10.7 nm for the 150-nm film over a 5 × 5 μm scanning area. Confocal scanning laser microscopy and scanning electron microscopy revealed that the bactericidal activity of the 3-nm silver film was not significant, whereas the nanoscopically smoother 150-nm silver film exhibited appreciable bactericidal activity towards Pseudomonas aeruginosa ATCC 9027 cells and Staphylococcus aureus CIP 65.8 cells, obtaining up to 75% and 27% sterilisation effect, respectively.     

Experimental and theoretical investigations on the structure-properties interrelationship of the gadolinium-vanadate-germanate glasses

Glasses in the system xGd₂O₃·(100-x)[GeO₂·V₂O₅] with 0 ≤ × ≤ 20 mol% have been prepared from the melt quenching method. In this paper, we investigated changes in germanium coordination number in gadolinium-vanadate-germanate glasses through molar volume analysis, measurements of densities, investigations of FTIR and UV-VIS spectroscopy, calculations of density functional theory (DFT). Analyzing the structural changes resulted from the IR spectra we found that the gadolinium ions have a pronounced affinity toward [VO₄] structural units which contain non-bridging oxygens necessary for the charge compensation. The introduction of the excess of oxygen yields the formation of [VO₅] structural units. This attains maximum value at 5 mol% Gd₂O₃, in agreement with the density measurements. Further, the addition of the surplus of oxygen implies the transformation of [VO₅] to [VO₄] structural units and the formation of VO₄⁻³ orthovanadate structural units. The UV-VIS spectra show a broad UV absorption band located in the 300–500 nm region. These bands are assumed to originate from the combination of vanadium ions possibly present in the three states of valence. The presence of Ge-Ge wrong bonds attains its maximum values in the samples with x = 5 and 15 mol% Gd₂O₃ (bands centered in the 250–300 nm range). DFT calculations show the massive vibrations of the [VO_n] structural units coupled with each other via [GeO₆] and [GeO₄] structural units. This leads to the splitting of the bridge modes and a multiplication of the number of these bands.     

A novel cold-adapted lipase from <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. XMZ-26: gene cloning and characterisation

Acinetobacter sp. XMZ-26 (ACCC 05422) was isolated from soil samples obtained from glaciers in Xinjiang Province, China. The partial nucleotide sequence of a lipase gene was obtained by touchdown PCR using degenerate primers designed based on the conserved domains of cold-adapted lipases. Subsequently, a complete gene sequence encoding a 317 amino acid polypeptide was identified. Our novel lipase gene, lipA, was overexpressed in Escherichia coli. The recombinant protein (LipA) was purified by Ni-affinity chromatography, and then deeply characterised. The LipA resulted to hydrolyse pNP esters of fatty acids with acyl chain length from C2 to C16, and the preferred substrate was pNP octanoate showing a k _cat = 560.52 ± 28.32 s⁻¹, K _m = 0.075 ± 0.008 mM, and a k _cat/K _m = 7,377.29 ± 118.88 s⁻¹ mM⁻¹. Maximal LipA activity was observed at a temperature of 15°C and pH 10.0 using pNP decanoate as substrate. That LipA peaked at such a low temperature and remained most activity between 5°C and 35°C indicated that it was a cold-adapted enzyme. Remarkably, this lipase retained much of its activity in the presence of commercial detergents and organic solvents, including Ninol, Triton X-100, methanol, PEG-600, and DMSO. This cold-adapted lipase may find applications in the detergent industry and organic synthesis.     

Effects of nonspecific ion-protein interactions on the redox chemistry of cytochrome c

 The effects of the ionic atmosphere on the enthalpic and entropic contributions to the reduction potential of native (state III) beef heart cytochrome c have been determined through variable-temperature direct electrochemistry experiments. At neutral or slightly alkaline pH values, from 5 to 50  °C, the reduction enthalpy and entropy become less negative with decreasing ionic strength. The reduction entropy extrapolated at null ionic strength is approximately zero, indicating that, in the absence of the screening effects of the salt ions on the network of the electrostatic interactions at the protein-solvent interface, the solvation properties and the conformational flexibility of the two redox states are comparable. The moderate decrease in E°′ observed with increasing ionic strength [ΔE°′_IS =(E°′) _{I =0.1 M}–(E°′) _{I =0 M}=–0.035 V at 25  °C], once the compensating enthalpic and entropic effects of the salt-induced changes in the hydrogen bonding within the hydration sphere of the molecule in the two redox states are factorized out, results in being ultimately determined by the stabilizing enthalpic effect of the negatively charged ionic atmosphere on the ferri form. At pH 9, the ionic strength dependence of the reduction termodynamics of cytochrome c follows distinctive patterns, possibly as a result of specific binding of the hydroxide ion to the protein. A decrease in ionic strength at constant pH, as well as a pH increase at constant ionic strength, induces a depression of the temperature of the transition from the low-T to high-T conformer of cytochrome c, which suggests that a temperature-induced decrease in the pK _a for a residue deprotonation is the key event of this conformational change. Received: 7 April 1999 / Accepted: 19 July 1999     

Cloning and characterization of a thermostable and halo-tolerant endoglucanase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis> MB4

A β-1,4-endoglucanase (Cel5A) was cloned from the genomic DNA of saccharolytic thermophilic eubacterium Thermoanaerobacter tengcongensis MB4 and functionally expressed in Escherichia coli. Substrate specificity analysis revealed that Cel5A cleaves specifically the β-1,4-glycosidic linkage in cellulose with high activity (294 U mg⁻¹; carboxymethyl cellulose sodium (CMC)). On CMC, kinetics of Cel5A was determined (K _m 1.39 ± 0.12 g l⁻¹; k _cat/K _m 1.41 ± 0.13 g⁻¹ s⁻¹). Cel5A displays an activity optimum between 75 and 80 °C. Residues Glu187 and Glu289 were identified as key catalytic amino acids by sequence alignment. Interestingly, derived from a non-halophilic bacterium, Cel5A exhibits high residual activities in molar concentration of NaCl (3 M, 49.3%) and KCl (4 M, 48.6%). In 1 M NaCl, 82% of Cel5A activity is retained after 24 h incubation. Molecular Dynamics studies performed at 0 and 3 M NaCl, correlate the Cel5A stability to the formation of R-COO⁻···Na⁺ ···⁻OOC-R salt bridges within the Cel5A tertiary structure, while activity possibly relates to the number of Na⁺ ions trapped into the negatively charged active site, involving a competition mechanism between substrate and Na⁺. Additionally, Cel5A is remarkably resistant in ionic liquids 1-butyl-3-methyllimidazolium chloride (1 M, 54.4%) and 1-allyl-3-methylimidazolium chloride (1 M, 65.1%) which are promising solvents for cellulose degradation and making Cel5A an attractive candidate for industrial applications.     

Influence of the Selected Antioxidants on the Stability of the Celsior Solution Used for Perfusion and Organ Preservation Purposes

The purpose of the following research was to improve the original Celsior solution in order to obtain a higher degree of stability and effectiveness. The solution was modified by the addition of selected antioxidants such as vitamin C, cysteine, and fumaric acid in the following concentrations: 0.1, 0.3, and 0.5 mmol/l. The solution’s stability was estimated using an accelerated stability test based on changes in histidine concentrations in the solution using Pauly’s method for determining concentrations. Elevated temperatures, the factor accelerating substances’ decomposition reaction rate, were used in the tests. The research was conducted at four temperatures at intervals of 10°C: 60 ± 0.2°C, 70 ± 0.2°C, 80 ± 0.2°C, and 90 ± 0.2°C. It was stated that the studied substances’ decomposition occurred in accordance with the equation for first-order reactions. The function of the logarithmic concentration (log%C) over time was revealed to be rectilinear. This dependence was used to determine the kinetics of decomposition reaction rate parameters (the rate constant of decomposition k, activation energy E _a, and frequency factor A). On the basis of these parameters, the stability of the modified solution was estimated at +5°C. The results obtained show that the proposed antioxidants have a significant effect on lengthening the Celsior solution’s stability. The best results were reached when combining two antioxidants: vitamin C and cysteine in 0.5 mmol/l concentrations. As a result, the Celsior solution’s stability was lengthened from 22 to 299 days, which is 13.5 times. Vitamin C at a concentration of 0.5 mmol/l increased the solution’s stability by 5.2 times (t ₉₀ = 115 days), cysteine at a concentration of 0.5 mmol/l caused a 4.4 times stability increase (t ₉₀ = 96 days), and fumaric acid at a concentration of 0.5 mmol/l extended the stability by 2.1 times (t ₉₀ = 48 days) in relation to the original solution.     

Aflatoxins in peanut butter in Khartoum State,Sudan

Forty-three peanut butter samples from Khartoum State, Sudan, were analyzed for aflatoxins (AFs, AFB₁ + AFB₂ + AFG₁ + AFG₂) using high performance liquid chromatography (HPLC) with fluorescence detection after extraction with methanol:water (8:1, v/v) and clean-up using chloroform. All samples were contaminated with AFs, with total AF levels ranging between 26.7 and 853 μg/kg, and a mean total AF level of 287 ± 200.5 μg/kg. The highest concentrations were found for AFB₁, (28 positive samples, maximum 534 μg/kg), while AFG₁ was most frequently detected (43 positive samples, maximum 401 μg/kg). AFB₂ (42 positive samples, maximum 3.2 μg/kg) and AFG₂ (4 positive samples, maximum 30 μg/kg) were also present in these samples. The mean AF contamination levels found in this study exceeded by far all international regulations concerning maximum levels for this group of toxins. From the data, it is concluded that the levels of AF contamination in peanut butter from the Kartoum area are quite alarming, and may pose serious health hazards to consumers. Therefore, an intervention strategy to manage AF in peanut butter is urgently needed.     

Thermoluminescence studies on the facultative crassulacean-acid- metabolism plant Mesembryanthemum crystallinum L.

Thermoluminescence (TL) signals were measured from leaves of the facultative CAM (crassulacean acid metabolism) plant Mesembryanthemum crystallinum L.. Following the induction of CAM by salt treatment, a TL band at 46 °C was induced, which was charged by a single-turnover flash. The intensity of the 46 °C-band depends on the number of excitation flashes and oscillates with a period of four. A similar band was induced in C₃ plants by far-red illumination. Under CAM conditions, the intensity of the 46 °C-band underlies a diurnal rhythm. The maximal intensity of the 46 °C-band is observed in the morning after onset of the light and in the evening. At around 12 a.m. it is suppressed. The intensity of the 46 °C-band relates to diurnal changes in the ratio of dihydroxy acetone phosphate/3-phosphoglycerate (DHAP/PGA) which is an indicator of the energy status of the chloroplast. During high-intensity illumination, the 46 °C-band disappears, but it is restored in the dark. We propose that the 46 °C-band is an indicator of the metabolic state of the leaf, originating from photosystem II centres initially in the S₂(S₃)Q_B oxidation state, in which the electron acceptor Q_B becomes reduced either by reverse electron flow or reduction of the plastoquinone pool via an NAD(P)H plastoquinone oxidoreductase. We present evidence that the redox state of the electron-transport chain is different under conditions of CAM compared to C₃ metabolism and that changes induced by CAM can be monitored by measuring the amplitude of the 46 °C-band after flash excitation. Received: 7 August 1997 / Accepted: 22 December 1997     

Enzyme characteristics of aminotransferase FumI of Sphingopyxis sp. MTA144 for deamination of hydrolyzed fumonisin B₁

Fumonisins are carcinogenic mycotoxins that are frequently found as natural contaminants in maize from warm climate regions around the world. The aminotransferase FumI is encoded as part of a gene cluster of Sphingopyxis sp. MTA144, which enables this bacterial strain to degrade fumonisin B₁ and related fumonisins. FumI catalyzes the deamination of the first intermediate of the catabolic pathway, hydrolyzed fumonisin B₁. We used a preparation of purified, His-tagged FumI, produced recombinantly in Escherichia coli in soluble form, for enzyme characterization. The structure of the reaction product was studied by NMR and identified as 2-keto hydrolyzed fumonisin B₁. Pyruvate was found to be the preferred co-substrate and amino group receptor (K _M = 490 μM at 10 μM hydrolyzed fumonisin B₁) of FumI, but other α-keto acids were also accepted as co-substrates. Addition of the co-enzyme pyridoxal phosphate to the enzyme preparation enhanced activity, and saturation was already reached at the lowest tested concentration of 10 μM. The enzyme showed activity in the range of pH 6 to 10 with an optimum at pH 8.5, and in the range of 6°C to 50°C with an optimum at 35°C. The aminotransferase worked best at low salt concentration. FumI activity could be recovered after preincubation at pH 4.0 or higher, but not lower. The aminotransferase was denatured after preincubation at 60°C for 1 h, and the residual activity was also reduced after preincubation at lower temperatures. At optimum conditions, the kinetic parameters K _M = 1.1 μM and k _cat = 104/min were determined with 5 mM pyruvate as co-substrate. Based on the enzyme characteristics, a technological application of FumI, in combination with the fumonisin carboxylesterase FumD for hydrolysis of fumonisins, for deamination and detoxification of hydrolyzed fumonisins seems possible, if the enzyme properties are considered.     

Covalent immobilization of recombinant <Emphasis Type="Italic">Rhizobium etli</Emphasis> CFN42 xylitol dehydrogenase onto modified silica nanoparticles

Rare sugars have many applications in food industry, as well as pharmaceutical and nutrition industries. Xylitol dehydrogenase (XDH) can be used to synthesize various rare sugars enzymatically. However, the immobilization of XDH has not been performed to improve the industrial production of rare sugars. In this study, silica nanoparticles which have high immobilization efficiency were selected from among several carriers for immobilization of recombinant Rhizobium etli CFN42 xylitol dehydrogenase (ReXDH) and subjected to characterization. Among four different chemical modification methods to give different functional groups, the silica nanoparticle derivatized with epoxy groups showed the highest immobilization efficiency (92%). The thermostability of ReXDH was improved more than tenfold by immobilization on epoxy-silica nanoparticles; the t _1/2 of the ReXDH was enhanced from 120 min to 1,410 min at 40 °C and from 30 min to 450 min at 50 °C. The K _m of ReXDH was slightly altered from 17.9 to only 19.2 mM by immobilization. The immobilized ReXDH had significant reusability, as it retained 81% activity after eight cycles of batch conversion of xylitol into l-xylulose. A ∼ 71% conversion and a productivity of 10.7 g h^-1 l^-1 were achieved when the immobilized ReXDH was employed to catalyze the biotransformation of xylitol to l-xylulose, a sugar that has been used in medicine and in the diagnosis of hepatitis. These results suggest that immobilization of ReXDH onto epoxy-silica nanoparticles has potential industrial application in rare sugar production.     

Heterologous expression and characterization of Choline Oxidase from the soil bacterium Arthrobacter nicotianae

In the course of a microbial screening of soil samples for new oxidases, different enrichment strategies were carried out. With choline as the only carbon source, a microorganism was isolated and identified as Arthrobacter nicotianae. From this strain, a gene coding for a choline oxidase was isolated from chromosomal DNA. This gene named codA was cloned in Escherichia coli BL21-Gold and the protein (An_CodA) heterologously overexpressed as a soluble intracellular protein of 59.1 kDa. Basic biochemical characterization of purified protein revealed a pH optimum of 7.4 and activity over a broad temperature range (15–70 °C). Specific activities were determined toward choline chloride (4.70 ± 0.12 U/mg) and the synthetic analogs bis(2-hydroxyethyl)-dimethylammonium chloride (0.05 ± 0.45 × 10^–2 U/mg) and tris-(2-hydroxyethyl)-methylammonium methylsulfate (0.01 ± 0.12 × 10^–2 U/mg). With increasing number of oxidizable groups, a significant decrease in activity was noted. Determination of kinetic parameters in atmorspheric oxygen resulted in K _M = 1.51 ± 0.09 mM and V _max = 42.73 ± 0.42 mU/min for choline chloride and K _M = 4.77 ± 0.76 mM and V _max = 48.40 ± 2.88 mU/min for the reaction intermediate betaine aldehyde respectively. Nuclear magnetic resonance spectroscopic analysis of the products formed during the enzyme reaction with choline chloride showed that in vitro the intermediate betaine aldehyde exists also free in solution.     

FTIR, Raman, and UV-Vis spectroscopic and DFT investigations of the structure of iron-lead-tellurate glasses

In this work, the effects of iron ion intercalations on lead–tellurate glasses were investigated via FTIR, Raman and UV-Vis spectroscopies. This homogeneous glass system has compositions xFe₂O₃·(100−x)[4TeO₂·PbO₂], where x = 0–60 mol%. The presented observations in these mechanisms show that the lead ions have a pronounced affinity towards [TeO₃] structural units, resulting in the deformation of the Te–O–Te linkages, and leading to the intercalation of [PbO _n ] (n = 3, 4) and [FeO _n ] (n = 4, 6) entities in the [TeO₄] chain network. The formation of negatively charged [FeO₄]¹⁻ structural units implies the attraction of Pb²⁺ ions in order to compensate for this electrical charge. Upon increasing the Fe₂O₃ content to 60 mol%, the network can accommodate an excess of oxygen through the formation of [FeO₆] structural units and the conversion of [TeO₄] into [TeO₃] structural units. For even higher Fe₂O₃ contents, Raman spectra indicate a greater degree of depolymerization of the vitreous network than FTIR spectra do. The bands due to the Pb–O bond vibrations are very strongly polarized and the [TeO₄] structural units convert into [TeO₃] units via an intermediate coordination stage termed “[TeO₃₊₁]” structural units. Our UV-Vis spectroscopic data show two mechanisms: (i) the conversion of the Fe³⁺ to Fe²⁺ at the same time as the oxidation of Pb²⁺ to Pb⁺⁴ ions for samples with low Fe₂O₃ contents; (ii) when the Fe₂O₃ content is high (x ≥ 50 mol%), the Fe²⁺ ions capture positive holes and are transferred to Fe³⁺ ions through a photochemical reaction, while the Pb²⁺ ions are formed by the reduction of Pb⁴⁺ ions. DFT calculations show that the addition of Fe₂O₃ to lead–tellurate glasses seems to break the axial Te–O bonds, and the [TeO₄] structural units are gradually transformed into [TeO₃₊₁]- and [TeO₃]-type polyhedra. Analyzing these data further indicates a gradual conversion of the lead ions from covalent to ionic environment. There is then a charge transfer between the tri- and tetracoordinated tellurium atoms due to the capacity of the lead–tellurate network to form the appropriate coordination environments containing structural units of opposite charge, such as iron ions, [FeO₄]¹⁻.     

Ochratoxin A production in aniseed-based media by selected fungal strains and in anise fruits (<Emphasis Type="Italic">Pimpinella anisum</Emphasis> L.)

The growth conditions and ochratoxin A (OTA) production of Aspergillus strains were studied in aniseed (Pimpinella anisum L.)-based media. The results showed that methanol/NaHCO₃ (50:50, v/v) mixture for extraction and competitive direct ELISA analytical method are capable of detecting low OTA concentrations in this raw material, which were confirmed by HPLC with fluorescence detection (R ² = 0.994). In aniseed meal extract agar artificially contaminated with selected fungi, the higher OTA values obtained were 283.8 ± 28.1 μg L^-1 for A. carbonarius and between 1.7 ± 0.1 μg L^-1 and 16.5 ± 12.8 μg L^-1 for A. steynii strains. While the optimal conditions of growth for A. carbonarius and A. steynii are 28°C and 0.98 a _w, the optimal production of OTA was observed at 0.99 a _w for both A. carbonarius and A. steynii but at 22°C and 28°C, respectively. Except in one sample, all the aniseed samples analysed were negative for OTA natural contamination. This study demonstrates that aniseed can be a matrix capable to contamination with OTA, at least produced by A. carbonarius and A. steynii strains, regardless of the antimicrobial properties of aniseed essential oil.     

Biosynthesis of silver nanoparticles by a new strain of <Emphasis Type="Italic">Streptomyces</Emphasis> sp. compared with <Emphasis Type="Italic">Aspergillus</Emphasis><Emphasis Type="Italic">fumigatus</Emphasis>

Locally isolated strains of a thermoalkalotolerant Streptomyces sp. and Aspergillus fumigatus were used for the in vitro biosynthesis of silver nanoparticles from AgNO₃ solutions. An autolysed cell-free culture filtrate from each strain was used, indicating that the formation mechanism depends on intra-cellular components for both organisms, since culture broths had no significant nanoparticle formation potential. Nanoparticle formation was indicated by a change of the solution from colourless or light brown to dark brown after 24 h or more, and UV–visible spectroscopy and x-ray diffraction analysis confirmed the formation by both organisms. The initial formation kinetics were faster with Aspergillus, but formation continued for a longer period with Streptomyces, resulting in higher concentrations after 48 h. Transmission electron microscope images revealed well dispersed nanoparticles with diameters ranging from 15 to 45 nm from A. fumigatus, while those from Streptomyces sp. had a narrower size distribution of 15–25 nm. The higher productivity and preferred narrower size distribution of Streptomyces, together with its well established industrial use, may make it the preferred choice for further optimization studies.     

Kinetic studies of electron transfer in the cyt b 5 : metHb system

 The kinetics of methemoglobin reduction by cytochrome b ₅ has been studied by stopped-flow and saturation transfer NMR. A forward rate constant k _f = 2.44×10⁴ M^–1 s^–1 and a reverse rate constant k _b = 540 M^–1s^–1 have been observed at 10 mm, pH 6.20, 25  °C. The ratio k _f/k _b = k _eq = 43.6 is in good agreement with the equilibrium constant calculated from the electrochemical potential between cyt b ₅ and methemoglobin. A bimolecular collisional mechanism is proposed for the electron transfer from cyt b ₅ to methemoglobin based on the kinetic data analysis. The dependence of the rate constants on ionic strengths supports such collisional mechanism. It is also found that the reaction rate strongly depends on the conformations of methemoglobin. Received: 20 February 1996 / Accepted: 4 June 1996