A recombinant virus between the Sabin 1 and Sabin 3 vaccine strains of poliovirus as a possible candidate for a new type 3 poliovirus live vaccine strain.

Biological tests including the monkey neurovirulence test performed on recombinants between the virulent Mahoney and attenuated Sabin 1 strains of type 1 poliovirus indicated that the genome region encoding mainly the viral capsid proteins had little correlation with the neurovirulence or attenuation phenotype of the virus. The results suggested that new vaccine strains of type 2 and type 3 polioviruses may be constructed in vitro by replacing the sequence encoding the antigenic determinants in viral capsid proteins of the Sabin 1 genome by the corresponding sequences of the type 2 and type 3 genome, respectively. Accordingly, we constructed recombinants between the Sabin 1 and Sabin 3 strains of poliovirus in which genome sequences of the Sabin 1 strain encoding most or all capsid proteins were replaced by the corresponding genome sequences of the Sabin 3 strain. One of the recombinant viruses thus constructed was fully viable and showed antigenicity and immunogenicity identical to those of type 3 poliovirus. The monkey neurovirulence tests and in vitro phenotypic marker tests (temperature sensitivity of growth, sodium bicarbonate concentration dependency of growth under agar overlay, and size of plaque) were performed on the recombinant virus. The stability of the virus in regard to the temperature sensitivity phenotype was also tested. The results suggested that the recombinant virus is a possible candidate for a new type 3 poliovirus vaccine strain.     

Long-term excretion of vaccine-derived poliovirus by a healthy child

A child was found to be excreting type 1 vaccine-derived poliovirus (VDPV) with a 1.1% sequence drift from Sabin type 1 vaccine strain in the VP1 coding region 6 months after he was immunized with oral live polio vaccine. Seventeen type 1 poliovirus isolates were recovered from stools taken from this child during the following 4 months. Contrary to expectation, the child was not deficient in humoral immunity and showed high levels of serum neutralization against poliovirus. Selected virus isolates were characterized in terms of their antigenic properties, virulence in transgenic mice, sensitivity for growth at high temperatures, and differences in nucleotide sequence from the Sabin type 1 strain. The VDPV isolates showed mutations at key nucleotide positions that correlated with the observed reversion to biological properties typical of wild polioviruses. A number of capsid mutations mapped at known antigenic sites leading to changes in the viral antigenic structure. Estimates of sequence evolution based on the accumulation of nucleotide changes in the VP1 coding region detected a "defective" molecular clock running at an apparent faster speed of 2.05% nucleotide changes per year versus 1% shown in previous studies. Remarkably, when compared to several type 1 VDPV strains of different origins, isolates from this child showed a much higher proportion of nonsynonymous versus synonymous nucleotide changes in the capsid coding region. This anomaly could explain the high VP1 sequence drift found and the ability of these virus strains to replicate in the gut for a longer period than expected.     

Complete nucleotide sequences of all three poliovirus serotype genomes. Implication for genetic relationship, gene function and antigenic determinants

The complete nucleotide sequences of the genomes of the type 2 ( P712 , Ch, 2ab ) and type 3 (Leon 12a1b ) poliovirus vaccine strains were determined. Comparison of the sequences with the previously established genome sequence of type 1 (LS-c, 2ab ) poliovirus vaccine strain revealed that 71% of the nucleotides in the genome RNAs were common, that the 5' and 3' termini of the genomes were highly homologous, and that more than 80% of the nucleotide differences in the coding region occurred in the third letter position of in-phase codons, resulting in a low frequency of amino acid difference. These results strongly suggested that the serotypes of poliovirus derived from a common prototype. A comparison of the amino acid sequences predicted from the genome sequences showed highest variation in the capsid protein region, whereas non-structural proteins are highly conserved. Initiation of polyprotein synthesis occurs in all three strains more than 740 nucleotides downstream from the 5' end. An analysis of the non-coding region suggests that small peptides that could potentially originate from this region are conserved. The amino acid sequences immediately surrounding the cleavage signals, however, show a higher than average degree of variation. The analysis of the amino acid sequences of the capsid protein VP1 of all serotypes has led to the prediction of potential antigenic sites on the virion involved in neutralization.     

Construction of poliovirus intertypic recombinants by use of cDNA.

We investigated the use of infectious cDNA for the production of poliovirus type 1-type 3 recombinants. One such recombinant virus was produced, but a second construct involving the transfer of part of the capsid protein region was not infectious. Our results suggest that the approach may prove valuable but that not all cDNA constructs will give rise to viable viruses.     

Coinfection with recombinant vaccinia viruses expressing poliovirus P1 and P3 proteins results in polyprotein processing and formation of empty capsid structures.

The assembly process of poliovirus occurs via an ordered proteolytic processing of the capsid precursor protein, P1, by the virus-encoded proteinase 3CD. To further delineate this process, we have isolated a recombinant vaccinia virus which expresses, upon infection, the poliovirus P1 capsid precursor polyprotein with an authentic carboxy terminus. Coinfection of HeLa cells with the P1-expressing vaccinia virus and with a second recombinant vaccinia virus which expresses the poliovirus proteinase 3CD resulted in the correct processing of P1 to yield the three individual capsid proteins VP0, VP3, and VP1. When extracts from coinfected cells were fractionated on sucrose density gradients, the VP0, VP3, and VP1 capsid proteins were immunoprecipitated with type 1 poliovirus antisera from fractions corresponding to a sedimentation consistent for poliovirus 75S procapsids. Examination of these fractions by electron microscopy revealed structures which lacked electron-dense cores and which corresponded in size and shape to those expected for poliovirus empty capsids. We conclude that the expression of the two poliovirus proteins P1 and 3CD in coinfected cells is sufficient for the correct processing of the capsid precursor to VP0, VP3, and VP1 as well as for the assembly of poliovirus empty capsid-like structures.     

Natural type 3/type 2 intertypic vaccine-related poliovirus recombinants with the first crossover sites within the VP1 capsid coding region

Background

Ten uncommon natural type 3/type 2 intertypic poliovirus recombinants were isolated from stool specimens from nine acute flaccid paralysis case patients and one healthy vaccinee in China from 2001 to 2008.

Principal Findings

Complete genomic sequences revealed their vaccine-related genomic features and showed that their first crossover sites were randomly distributed in the 3′ end of the VP1 coding region. The length of donor Sabin 2 sequences ranged from 55 to 136 nucleotides, which is the longest donor sequence reported in the literature for this type of poliovirus recombination. The recombination resulted in the introduction of Sabin 2 neutralizing antigenic site 3a (NAg3a) into a Sabin 3 genomic background in the VP1 coding region, which may have been altered by some of the type 3-specific antigenic properties, but had not acquired any type 2-specific characterizations. NAg3a of the Sabin 3 strain seems atypical; other wild-type poliovirus isolates that have circulated in recent years have sequences of NAg3a more like the Sabin 2 strain.

Conclusions

10 natural type 3/type 2 intertypic VP1 capsid-recombinant polioviruses, in which the first crossover sites were found to be in the VP1 coding region, were isolated and characterized. In spite of the complete replacement of NAg3a by type 2-specific amino acids, the serotypes of the recombinants were not altered, and they were totally neutralized by polyclonal type 3 antisera but not at all by type 2 antisera. It is possible that recent type 3 wild poliovirus isolates may be a recombinant having NAg3a sequences derived from another strain during between 1967 and 1980, and the type 3/type 2 recombination events in the 3′ end of the VP1 coding region may result in a higher fitness.     

Expression of poliovirus complementary DNA coding for viral antigenic determinants in Escherichia coli

DNA sequences coding for the immunogenic capsid protein VP1 and/or VP3 of poliovirus strain LSc-2ab (Sabin 1) were prepared by digesting the cloned complementary DNA with restriction endonuclease PstI. The DNA fragments were inserted into the unique PstI site of Escherichia coli plasmid vectors pBR322, pKT 280 and/or pKT 287 that lay in the region expressed under control of the penicillinase promoter system. In the expression vectors, poliovirus sequences were designed to be read in phase and therefore to be expressed as fusion proteins with the bacterial peptides. In addition, the Escherichia coli tryptophan operon promoter-operator system was inserted upstream of the penicillinase system to obtain stronger expression of the poliovirus sequences. Escherichia coli transformed with these plasmids appeared to produce the antigenic polypeptides, which were detected by immunoprecipitation with antibodies to capsid proteins VP1 and/or VP3 followed by SDS-polyacrylamide gel electrophoresis.     

Mapping of sequences required for mouse neurovirulence of poliovirus type 2 Lansing.

Intracerebral inoculation of mice with poliovirus type 2 Lansing induces a fatal paralysis, while most other poliovirus strains are unable to cause disease in the mouse. To determine the molecular basis for Lansing virus neurovirulence, we determined the complete nucleotide sequence of the Lansing viral genome from cloned cDNA. The deduced amino acid sequence was compared with that of two mouse-avirulent strains. There are 83 amino acid differences between the Lansing and Sabin type 2 strain and 179 differences between the Lansing and Mahoney type 1 strain scattered throughout the genome. To further localize Lansing sequences important for mouse neurovirulence, four intertypic recombinants were isolated by exchanging DNA restriction fragments between the Lansing 2 and Mahoney 1 infectious poliovirus cDNA clones. Plasmids were transfected into HeLa cells, and infectious recombinant viruses were recovered. All four recombinant viruses, which contained the Lansing capsid region and different amounts of the Mahoney genome, were neurovirulent for 18- to 21-day-old Swiss-Webster mice by the intracerebral route. The genome of neurovirulent recombinant PRV5.1 contained only nucleotides 631 to 3413 from Lansing, encoding primarily the viral capsid proteins. Therefore, the ability of Lansing virus to cause paralysis in mice is due to the viral capsid. The Lansing capsid sequence differs from that of the mouse avirulent Sabin 2 strain at 32 of 879 amino acid positions: 1 in VP4, 5 in VP2, 4 in VP3, and 22 in VP1.     

Myristylation of poliovirus capsid precursor P1 is required for assembly of subviral particles.

The poliovirus capsid precursor polyprotein, P1, is cotranslationally modified by the addition of myristic acid. We have examined the importance of myristylation of the P1 capsid precursor during the poliovirus assembly process by using a recently described recombinant vaccinia virus expression system which allows the independent production of the poliovirus P1 protein and the poliovirus 3CD proteinase (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 65:2088-2092, 1991). We constructed a site-directed mutation in the poliovirus cDNA encoding an alanine at the second amino acid position of P1 in place of the glycine residue required for the myristic acid addition and isolated a recombinant vaccinia virus (VVP1myr-) that expressed a nonmyristylated form of the P1 capsid precursor. The 3CD proteinase expressed by a coinfecting vaccinia virus, VVP3, proteolytically processed the nonmyristylated precursor P1 expressed by VVP1myr-. However, the processed capsid proteins, VP0, VP3, and VP1, did not assemble into 14S or 75S subviral particles, in contrast to the VP0, VP3, and VP1 proteins derived from the myristylated P1 precursor. When cells were coinfected with VVP1myr- and poliovirus type 1, the nonmyristylated P1 precursor expressed by VVP1myr- was processed by 3CD expressed by poliovirus, and the nonmyristylated VP0-VP3-VP1 (VP0-3-1) protomers were incorporated into capsid particles and virions which sedimented through a 30% sucrose cushion. Thus, the nonmyristylated P1 precursor and VP0-3-1 protomers were not excluded from sites of virion assembly, and the assembly defects observed for the nonmyristylated protomers were overcome in the presence of myristylated capsid protomers expressed by poliovirus. We conclude that myristylation of the poliovirus P1 capsid precursor plays an important role during poliovirus assembly by facilitating the appropriate interactions required between 5S protomer subunits to form stable 14S pentamers. The results of these studies demonstrate that the independent expression of the poliovirus P1 and 3CD proteins by using recombinant vaccinia viruses provides a unique experimental tool for analyzing the dynamics of the poliovirus assembly process.     

Encapsidation of poliovirus replicons encoding the complete human immunodeficiency virus type 1 gag gene by using a complementation system which provides the P1 capsid protein in trans.

Poliovirus genomes which contain small regions of the human immunodeficiency virus type 1 (HIV-1) gag, pol, and env genes substituted in frame for the P1 capsid region replicate and express HIV-1 proteins as fusion proteins with the P1 capsid precursor protein upon transfection into cells (W. S. Choi, R. Pal-Ghosh, and C. D. Morrow, J. Virol. 65:2875-2883, 1991). Since these genomes, referred to as replicons, do not express capsid proteins, a complementation system was developed to encapsidate the genomes by providing P1 capsid proteins in trans from a recombinant vaccinia virus, VV-P1. Virus stocks of encapsidated replicons were generated after serial passage of the replicon genomes into cells previously infected with VV-P1 (D. C. Porter, D. C. Ansardi, W. S. Choi, and C. D. Morrow, J. Virol. 67:3712-3719, 1993). Using this system, we have further defined the role of the P1 region in viral protein expression and RNA encapsidation. In the present study, we constructed poliovirus replicons which contain the complete 1,492-bp gag gene of HIV-1 substituted for the entire P1 region of poliovirus. To investigate whether the VP4 coding region was required for the replication and encapsidation of poliovirus RNA, a second replicon in which the complete gag gene was substituted for the VP2, VP3, and VP1 capsid sequences was constructed. Transfection of replicon RNA with and without the VP4 coding region into cells resulted in similar levels of expression of the HIV-1 Gag protein and poliovirus 3CD protein, as indicated by immunoprecipitation using specific antibodies. Northern (RNA) blot analysis of RNA from transfected cells demonstrated comparable levels of RNA replication for each replicon. Transfection of the replicon genomes into cells infected with VV-P1 resulted in the encapsidation of the genomes; serial passage in the presence of VV-P1 resulted in the generation of virus stocks of encapsidated replicons. Analysis of the levels of protein expression and encapsidated replicon RNA from virus stocks after 21 serial passages of the replicon genomes with VV-P1 indicated that the replicon which contained the VP4 coding region was present at a higher level than the replicon which contained a complete substitution of the P1 capsid sequences. These differences in encapsidation, though, were not detected after only two serial passages of the replicons with VV-P1 or upon coinfection and serial passage with type 1 Sabin poliovirus.(ABSTRACT TRUNCATED AT 400 WORDS)     

Natural recombination event within the capsid genomic region leading to a chimeric strain of human enterovirus B

Recombination between two strains is a known phenomenon for enteroviruses replicating within a single cell. We describe a recombinant strain recovered from human stools, typed as coxsackievirus B4 (CV-B4) and CV-B3 after partial sequencing of the VP1 and VP2 coding regions, respectively. The strain was neutralized by a polyclonal CV-B3-specific antiserum but not by a CV-B4-specific antiserum. The nucleotide sequence analysis of the whole structural genomic region showed the occurrence of a recombination event at position 1950 within the VP3 capsid gene, in a region coding for the 2b antigenic site previously described for CV-B3. This observation evidences for the first time the occurrence of an interserotypic recombination within the VP2-VP3-VP1 capsid region between two nonpoliovirus enterovirus strains. The neutralization pattern suggests that the major antigenic site is located within the VP2 protein.     

A poliovirus type 1 neutralization epitope is located within amino acid residues 93 to 104 of viral capsid polypeptide VP1.

Using nuclease Bal31, deletions were generated within the poliovirus type 1 cDNA sequences, coding for capsid polypeptide VP1, within plasmid pCW119. The fusion proteins expressed in Escherichia coli by the deleted plasmids reacted with rabbit immune sera directed against poliovirus capsid polypeptide VP1 (alpha VP1 antibodies). They also reacted with a poliovirus type 1 neutralizing monoclonal antibody C3, but reactivity was lost when the deletion extended up to VP1 amino acids 90-104. Computer analysis of the protein revealed a high local density of hydrophilic amino acid residues in the region of VP1 amino acids 93-103. A peptide representing the sequence of this region was chemically synthesized. Once coupled to keyhole limpet hemocyanin, this peptide was specifically immunoprecipitated by C3 antibodies. The peptide also inhibited the neutralization of poliovirus type 1 by C3 antibodies. We thus conclude that the neutralization epitope recognized by C3 is located within the region of amino acids 93-104 of capsid polypeptide VP1.     

Engineering a poliovirus type 2 antigenic site on a type 1 capsid results in a chimaeric virus which is neurovirulent for mice.

Poliovirus type 2 (PV-2) Lansing strain produces a fatal paralytic disease in mice after intracerebral injection, whereas poliovirus type 1 (PV-1) Mahoney strain causes disease only in primates. Atomic models derived from the three-dimensional crystal structure of the PV-1 Mahoney strain have been used to locate three antigenic sites on the surface of the virion. We report here the construction of type 1-type 2 chimaeric polioviruses in which antigenic site 1 from the PV-1 Mahoney strain was substituted by that of the PV-2 Lansing strain by nucleotide cassette exchange in a cloned PV-1 cDNA molecule. These chimaeras proved to have mosaic capsids with composite type 1 and type 2 antigenicity, and induced a neutralizing response against both PV-1 and PV-2 when injected into rabbits. Moreover, a six-amino-acid change in PV-1 antigenic site 1 was shown to be responsible for a remarkable host-range mutation in so far as one of the two type 1-type 2 chimaera was highly neurovirulent for mice.     

An antigen chimera of poliovirus induces antibodies against human papillomavirus type 16.

It has been established that the surface of poliovirus type 1 can be extensively modified to incorporate antigenic domains from other poliovirus serotypes and from unrelated viruses. The fact that the modified (chimeric) viruses exhibit dual antigenicity and immunogenicity led us to explore the possibility of using the Sabin vaccine strain of poliovirus type 1 as a vector for the presentation of antigenic domains from human papillomavirus type 16 (HPV-16), a virus associated with the development of cervical carcinoma. We report here the construction and characterization of a chimeric poliovirus containing a 16-residue sequence derived from the major capsid protein (L1) of HPV-16. This virus chimera stimulated the production in rabbits of antibodies which recognized the HPV-16-derived peptide and an L1 fusion protein synthesized in Escherichia coli and detected HPV-16 in human biopsy material by immunoperoxidase staining. The possibility that poliovirus-HPV chimeras could be used as vaccines against HPV-16 is discussed.     

Identification of a new neutralization antigenic site on poliovirus coat protein VP2

Major neutralization antigenic sites have been previously mapped by us on VP1, the largest capsid protein of poliovirus type 1. Here we report the first identification of the primary sequence of a neutralization antigenic site on capsid protein VP2. Inspection of the amino acid sequence of VP2 led to the selection and synthesis of a peptide (n = 12) that, after linking to a carrier protein, induced an antiviral neutralizing antibody response in rabbits. The response was augmented by a single subsequent inoculation of intact virus; thus, the peptide was also capable of priming the production of neutralizing antibodies. These antibodies were directed only against the site specified by the synthetic peptide. Although the VP2-specific neutralization antigenic site appears not to be strongly immunogenic in the intact virion, it can nevertheless contribute to neutralization of poliovirus. This observation may be important for the development of peptide vaccines.     

Structural factors modulate the activity of antigenic poliovirus sequences expressed on hybrid hepatitis B surface antigen particles.

We have studied the functional expression of antigenic poliovirus fragments carried by various hybrid hepatitis B surface antigen (HBsAg) particles. Several constructions were made by using two different insertion sites in the HBsAg molecule (amino acid positions 50 and 113) and two different sequences, one derived from poliovirus type 1 (PV-1) and the other from PV-2. The inserted fragments each encompassed residues 93 to 103 of the capsid protein VP1, a segment which includes the linear part of the neutralization antigenic site 1 of the poliovirus. The antigenicity and immunogenicity of the hybrid particles were evaluated and compared in terms of poliovirus neutralization. A high level of antigenic and immunogenic activity of the PV-1 fragment was obtained by insertion at position 113 but not at position 50 of HBsAg. However, a cooperative effect was observed when two PV-1 fragments were inserted at both positions of the same HBsAg molecule. Antibodies elicited by the PV-2 fragment inserted at amino acid position 113 did not bind or neutralize the corresponding poliovirus strain. They did, however, bind a chimeric poliovirus in which the homologous antigenic fragment of PV-1 had been replaced by that of PV-2. The only virions that were neutralized by these antibodies were certain mutants carrying amino acid substitutions within the PV-2 fragment. These results show that position, constraints from the carrier protein, and nature of the inserted sequences are critically important in favoring or limiting the expression of antigenic fragments as viral neutralization immunogens.     

Limited expression of poliovirus by vaccinia virus recombinants due to inhibition of the vector by proteinase 2A.

A recombinant vaccinia virus was constructed that expressed poliovirus coat precursor protein P1 fused to about two-thirds of the 2A proteinase. The truncated 2A segment could be cleaved away from the P1 region by coinfecting with poliovirus type 1, 2, or 3 or with human rhinovirus 14 but not with encephalomyocarditis virus. Further cleavage of the vector-derived P1 to yield mature poliovirus capsid proteins was not observed. Attempts to isolate vaccinia virus recombinants containing portions of the poliovirus genome that encompassed the complete gene for proteinase 2A were unsuccessful, unless expression of functional 2A was abolished by insertion of a frameshift mutation. We conclude that an activity of the 2A proteinase, probably its role in translational inhibition, prevented isolation of vaccinia virus recombinants that expressed 2A.     

Structural factors that control conformational transitions and serotype specificity in type 3 poliovirus.

The three-dimensional structure of the Sabin strain of type 3 poliovirus has been determined at 2.4 A resolution. Significant structural differences with the Mahoney strain of type 1 poliovirus are confined to loops and terminal extensions of the capsid proteins, occur in all of the major antigenic sites of the virion and typically involve insertions, deletions or the replacement of prolines. Several newly identified components of the structure participate in assembly-dependent interactions which are relevant to the biologically important processes of viral assembly and uncoating. These include two sites of lipid substitution, two putative nucleotides and a beta sheet formed by the N-termini of capsid proteins VP4 and VP1. The structure provides an explanation for the temperature sensitive phenotype of the P3/Sabin strain. Amino acids that regulate temperature sensitivity in type 3 poliovirus are located in the interfaces between promoters, in the binding site for a lipid substituent and in an assembly-dependent extended beta sheet that stabilizes the association of pentamers. Several lines of evidence indicate that these structural components also control conformational transitions at various stages of the viral life cycle.     

Poliovirus capsid proteins derived from P1 precursors with glutamine-valine cleavage sites have defects in assembly and RNA encapsidation.

Assembly of poliovirus virions requires proteolytic cleavage of the P1 capsid precursor polyprotein between two separate glutamine-glycine (QG) amino acid pairs by the viral protease 3CD. In this study, we have investigated the effects on P1 polyprotein processing and subsequent assembly of processed capsid proteins caused by substitution of the glycine residue at the individual QG cleavage sites with valine (QG-->QV). P1 cDNAs encoding the valine substitutions were created by site-directed mutagenesis and were recombined into wild-type vaccinia virus to generate recombinant vaccinia viruses which expressed the mutant P1 precursors. The recombinant vaccinia virus-expressed mutant P1 polyproteins were analyzed for proteolytic processing defects in cells coinfected with a recombinant vaccinia virus (VVP3) that expresses the poliovirus 3CD protease and for processing and assembly defects by using a trans complementation system in which P1-expressing recombinant vaccinia viruses provide capsid precursor to a defective poliovirus genome that does not express functional capsid proteins (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 67:3684-3690, 1993). The QV-substituted precursors were proteolytically processed at the altered sites both in cells coinfected with VVP3 and in cells coinfected with defective poliovirus, although the kinetics of cleavage at the altered sites were slower than those of cleavage at the wild-type QG site in the precursor. Completely processed capsid proteins VP0, VP3, and VP1 derived from the mutant precursor containing a valine at the amino terminus of VP3 (VP3-G001V) were unstable and failed to assemble stable subviral structures in cells coinfected with defective poliovirus. In contrast, capsid proteins derived from the P1 precursor with a valine substitution at the amino terminus of VP1 (VP1-G001V) assembled empty capsid particles but were deficient in assembling RNA-containing virions. The assembly characteristics of the VP1-G001V mutant were compared with those of a previously described VP3-VP1 cleavage site mutant (K. Kirkegaard and B. Nelsen, J. Virol. 64:185-194, 1990) which contained a deletion of the first four amino-terminal residues of VP1 (VP1-delta 1-4) and which was reconstructed for our studies into the recombinant vaccinia virus system. Complete proteolytic processing of the VP1-delta 1-4 precursor also occurred more slowly than complete cleavage of the wild-type precursor, and formation of virions was delayed; however, capsid proteins derived from the VP1-G001V mutant assembled RNA-containing virions less efficiently than those derived from the VP1-delta 1-4 precursor.(ABSTRACT TRUNCATED AT 400 WORDS)     

Complementation of a poliovirus defective genome by a recombinant vaccinia virus which provides poliovirus P1 capsid precursor in trans.

Defective interfering (DI) RNA genomes of poliovirus which contain in-frame deletions in the P1 capsid protein-encoding region have been described. DI genomes are capable of replication and can be encapsidated by capsid proteins provided in trans from wild-type poliovirus. In this report, we demonstrate that a previously described poliovirus DI genome (K. Hagino-Yamagishi and A. Nomoto, J. Virol. 63:5386-5392, 1989) can be complemented by a recombinant vaccinia virus, VVP1 (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 65:2088-2092, 1991), which expresses the poliovirus capsid precursor polyprotein, P1. Stocks of defective polioviruses were generated by transfecting in vitro-transcribed defective genome RNA derived from plasmid pSM1(T7)1 into HeLa cells infected with VVP1 and were maintained by serial passage in the presence of VVP1. Encapsidation of the defective poliovirus genome was demonstrated by characterizing poliovirus-specific protein expression in cells infected with preparations of defective poliovirus and by Northern (RNA) blot analysis of poliovirus-specific RNA incorporated into defective poliovirus particles. Cells infected with preparations of defective poliovirus expressed poliovirus protein 3CD but did not express capsid proteins derived from a full-length P1 precursor. Poliovirus-specific RNA encapsidated in viral particles generated in cells coinfected with VVP1 and defective poliovirus migrated slightly faster on formaldehyde-agarose gels than wild-type poliovirus RNA, demonstrating maintenance of the genomic deletion. By metabolic radiolabeling with [35S]methionine-cysteine, the defective poliovirus particles were shown to contain appropriate mature-virion proteins. This is the first report of the generation of a pure population of defective polioviruses free of contaminating wild-type poliovirus. We demonstrate the use of this recombinant vaccinia virus-defective poliovirus genome complementation system for studying the effects of a defined mutation in the P1 capsid precursor on virus assembly. Following removal of residual VVP1 from defective poliovirus preparations, processing and assembly of poliovirus capsid proteins derived from a nonmyristylated P1 precursor expressed by a recombinant vaccinia virus, VVP1 myr- (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 66:4556-4563, 1992), in cells coinfected with defective poliovirus were analyzed. Capsid proteins generated from nonmyristylated P1 did not assemble detectable levels of mature virions but did assemble, at low levels, into empty capsids.(ABSTRACT TRUNCATED AT 400 WORDS)