Three-dimensional structure of the central mitotic spindle of Diatoma vulgare

Central mitotic spindles in Diatoma vulgare have been investigated using serial sections and electron microscopy. Spindles at both early stages (before metaphase) and later stages of mitosis (metaphase to telophase) have been analyzed. We have used computer graphics technology to facilitate the analysis and to produce stereo images of the central spindle reconstructed in three dimensions. We find that at prometaphase, when the nuclear envelope is dissassembling, the spindle is constructed from two sets of polar microtubules (MTs) that interdigitate to form a zone of overlap. As the chromosomes become organized into the metaphase configuration, the polar MTs, the spindle, and the zone of overlap all elongate, while the number of MTs in the central spindle decreases from greater than 700 to approximately 250. Most of the tubules lost are short ones that reside near the spindle poles. The previously described decrease in the length of the zone of overlap during anaphase central spindle elongation is clearly demonstrated in stereo images. In addition, we have used our three- dimensional data to determine the lengths of the spindle MTs at various times during mitotis. The distribution of lengths is bimodal during prometaphase, but the short tubules disappear and the long tubules elongate as mitosis proceeds. The distributions of MT lengths are compared to the length distributions of MTs polymerized in vitro, and a model is presented to account for our findings about both MT length changes and microtubule movements.     

Interpolar spindle microtubules in PTK cells

Spindle microtubules (MTs) in PtK1 cells, fixed at stages from metaphase to telophase, have been reconstructed using serial sections, electron microscopy, and computer image processing. We have studied the class of MTs that form an interdigitating system connecting the two spindle poles (interpolar MTs or ipMTs) and their relationship to the spindle MTs that attach to kinetochores (kMTs). Viewed in cross section, the ipMTs cluster with antiparallel near neighbors throughout mitosis; this bundling becomes much more pronounced as anaphase proceeds. While the minus ends of most kMTs are near the poles, those of the ipMTs are spread over half of the spindle length, with at least 50% lying > 1.5 microns from the poles. Longitudinal views of the ipMT bundles demonstrate a major rearrangement of their plus ends between mid- and late anaphase B. However, the minus ends of these MTs do not move appreciably farther from the spindle midplane, suggesting that sliding of these MTs contributes little to anaphase B. The minus ends of ipMTs are markedly clustered in the bundles of kMTs throughout anaphase A. These ends lie close to kMTs much more frequently than would be expected by chance, suggesting a specific interaction. As sister kinetochores separate and kMTs shorten, the minus ends of the kMTs remain associated with the spindle poles, but the minus ends of many ipMTs are released from the kMT bundles, allowing the spindle pole and the kMTs to move away from the ipMTs as the spindle elongates.     

The effects of diazepam on mitosis and the microtubule cytoskeleton II. Observations on newt epithelial and PtK1 cells

Summary The effects of diazepam (DZP) on mitosis and the microtubule (MT) cytoskeleton were examined using live and fixed PtK₁ and newt (Taricha granulosa) epithelial lung cells. DZP treatment caused rapid shortening of spindle MTs at prometaphase and metaphase, inducing movement of the poles together while chromosome oscillations continued. DZP treatment slowed the rate of anaphase A but did not detectably affect anaphase B, cell cleavage or interphase cells. Our results suggest that DZP inhibits mitosis by affecting prometaphase and metaphase MTs. Its action is not equivalent to that of common anti-MT drugs, since only a small subpopulation of MTs are significantly susceptible. Likewise, its effects are not equivalent to those generated by metabolic inhibitors. The related benzodiazepines, medazepam and oxazepam, induce effects equivalent to those of DZP.     

Analysis of the distribution of spindle microtubules in the diatom Fragilaria.

The spindle of the colonial diatom Fragilaria contains two distinct sets of spindle microtubules (MTs): (a) MTs comprising the central spindle, which is composed of two half-spindles interdigitated to form a region of "overlap"; (b) MTs which radiate laterally from the poles. The central spindles from 28 cells are reconstructed by tracking each MT of the central spindle through consecutive serial sections. Because the colonies of Fragilaria are flat ribbons of contiguous cells (clones), it is possible, by using single ribbons of cells, to compare reconstructed spindles at different mitotic stages with minimal intercellular variability. From these reconstructions we have determined: (a) the changes in distribution of MTs along the spindle during mitosis; (b) the change in the total number of MTs during mitosis; (c) the length of each MT (measured by the number of sections each traverses) at different mitotic stages; (d) the frequency of different classes of MTs (i.e., free, continuous, etc.); (e) the spatial arrangement of MTs from opposite poles in the overlap; (f) the approximate number of MTs, separate from the central spindle, which radiate from each spindle pole. From longitudinal sections of the central spindle, the lengths of the whole spindle, half-spindle, and overlap were measured from 80 cells at different mitotic stages. Numerous sources of error may create inaccuracies in these measurements; these problems are discussed. The central spindle at prophase consists predominantly of continuous MTs (pole to pole). Between late prophase and prometaphase, spindle length increases, and the spindle is transformed into two half-spindles (mainly polar MTs) interdigitated to form the overlap. At late anaphase-telophase, the overlap decreases concurrent with spindle elongation. Our interpretation is that the MTs of the central spindle slide past one another at both late prophase and late anaphase. These changes in MT distribution have the effect of elongating the spindle and are not involved in the poleward movement of the chromosomes. Some aspects of tracking spindle MTs, the interaction of MTs in the overlap, formation of the prophase spindle, and our interpretation of rearrangements of MTs, are discussed.     

Dynamics of spindle microtubule organization: kinetochore fiber microtubules of plant endosperm

Organization of kinetochore fiber microtubules (MTs) throughout mitosis in the endosperm of Haemanthus katherinae Bak. has been analysed using serial section reconstruction from electron micrographs. Accurate and complete studies have required careful analysis of individual MTs in precisely oriented serial sections through many (45) preselected cells. Kinetochore MTs (kMTs) and non-kinetochore MTs (nkMTs) intermingle within the fiber throughout division, undergoing characteristic, time- dependent, organizational changes. The number of kMTs increases progressively throughout the kinetochore during prometaphase-metaphase. Prometaphase chromosomes which were probably moving toward the pole at the time of fixation have unequally developed kinetochores associated with many nkMTs. The greatest numbers of kMTs (74-109/kinetochore), kinetochore cross-sectional area, and kMT central density all occur at metaphase. Throughout anaphase and telophase there is a decrease in the number of kMTs and, in the kinetochore cross-sectional area, an increased obliquity of kMTs and increased numbers of short MTs near the kinetochore. Delayed kinetochores possess more kMTs than do kinetochores near the poles, but fewer kMTs than chromosomes which have moved equivalent distances in other cells. The frequency of C-shaped proximal MT terminations within kinetochores is highest at early prometaphase and midtelophase, falling to zero at midanaphase. Therefore, in Haemanthus, MTs are probably lost from the periphery of the kinetochore during anaphase in a manner which is related to both time and position of the chromosome along the spindle axis. The complex, time-dependent organization of MTs in the kinetochore region strongly suggests that chromosome movement is accompanied by continual MT rearrangement and/or assembly/disassembly.     

Microtubule flux and sliding in mitotic spindles of Drosophila embryos

We proposed that spindle morphogenesis in Drosophila embryos involves progression through four transient isometric structures in which a constant spacing of the spindle poles is maintained by a balance of forces generated by multiple microtubule (MT) motors and that tipping this balance drives pole-pole separation. Here we used fluorescent speckle microscopy to evaluate the influence of MT dynamics on the isometric state that persists through metaphase and anaphase A and on pole-pole separation in anaphase B. During metaphase and anaphase A, fluorescent punctae on kinetochore and interpolar MTs flux toward the poles at 0.03 microm/s, too slow to drive chromatid-to-pole motion at 0.11 microm/s, and during anaphase B, fluorescent punctae on interpolar MTs move away from the spindle equator at the same rate as the poles, consistent with MT-MT sliding. Loss of Ncd, a candidate flux motor or brake, did not affect flux in the metaphase/anaphase A isometric state or MT sliding in anaphase B but decreased the duration of the isometric state. Our results suggest that, throughout this isometric state, an outward force exerted on the spindle poles by MT sliding motors is balanced by flux, and that suppression of flux could tip the balance of forces at the onset of anaphase B, allowing MT sliding and polymerization to push the poles apart.     

Quantitative analysis of an anaphase B switch: predicted role for a microtubule catastrophe gradient

Anaphase B in Drosophila embryos is initiated by the inhibition of microtubule (MT) depolymerization at spindle poles, which allows outwardly sliding interpolar (ip) MTs to drive pole-pole separation. Using fluorescence recovery after photobleaching, we observed that MTs throughout the preanaphase B spindle are very dynamic and display complete recovery of fluorescence, but during anaphase B, MTs proximal to the poles stabilize and therefore display lower recovery than those elsewhere. Fluorescence microscopy of the MT tip tracker EB1 revealed that growing MT plus ends localize throughout the preanaphase B spindle but concentrate in the overlap region of interpolar MTs (ipMTs) at anaphase B onset. None of these changes occurred in the presence of nondegradable cyclin B. Modeling suggests that they depend on the establishment of a spatial gradient of MT plus-end catastrophe frequencies, decreasing toward the equator. The resulting redistribution of ipMT plus ends to the overlap zone, together with the suppression of minus-end depolymerization at the poles, could constitute a mechanical switch that initiates spindle elongation.     

Verteilung der Mikrotubuli in Metaphase- und Anaphase-Spindeln der Spermatocyten von Pales ferruginea

One metaphase I spindle, seven anaphase I spindles of different stages, and one metaphase II spindle were sectioned in series. The ultrastructure of chromosomes was examined and microtubules (MTs) were counted. The main results of the study are summarized as follows: 1. The autosomes move at the periphery of the continuous MTs during anaphase while the sex chromosomes move more or less within this group of MTs. 2. In metaphase the antosomes have few coarse surface projections, in anaphase many, but more delicate projections of irregular shape which seem to transform into regular radial lamellae at the end of movement. 3. In metaphase continuous MTs have no contact with the chromosomal surface, while during anaphase movement continuous MTs lie closer to the chromosomes, and finally arrange themselves between the radial surface lamellae. There they show lateral filamentous connections with the chromosomal surface. 4. The MT distribution profiles of metaphase and anaphase are different. While the highest density of MTs is observed in the middle region of the spindle in metaphase, there are two density zones during autosomal movement, each in one half spindle in front of the autosomes. After the autosomes have reached the poles the distribution profile is again similar to the metaphase condition. The MT distribution in metaphase II is the same as in metaphase I. Possible explanations for these observations are discussed in detail. 5. There is an overall decrease in MT content during anaphase. 6. With the onset of anaphase MTs are seen within the spindle mantle, closely associated with mitochondria. — Several theoretical aspects of anaphase mechanism are briefly discussed.     

Microtubule organization and distribution of gamma-tubulin in male meiosis of lepidoptera

Meiotic spindles in males of higher Lepidotera are unusual in that the bulk of the spindle microtubules (MTs) ends about halfway between the equatorial plate and the centrosomes in metaphase. It appears worthwhile to determine how the MTs are nucleated, while their pole proximal ends are distant from the centrosomes. To this end, spermatocytes of Phragmatobia fuliginosa (Arctiidae), collected in the field, were double-labeled with antibodies to beta- and gamma-tubulin. The former antibody reveals the entire microtubular cytoskeleton, and the latter is directed against a newly-discovered tublin isoform that is prevalent in microtubule-organizing centers (MTOCs). The immunocytochemical work was supplemented by a fine structural analysis of MTOCs and spindles. Gamma-tubulin was clearly detected at the spindle poles, and prominent microtubular asters originated from these sites. Additionally, MT arrays at both sides of the equatorial plate in metaphase spermatocytes contained gamma-tubulin. The staining persisted in late anaphase, when kinetochore MTs are depolymerized. This indicates that at least nonkinetochore MTs contain gamma-tubulin. The analysis of ultrathin sections through spindles revealed large amounts of pericentriolar material at the spindles poles, in prometaphase through anaphase. The spindle MTs appeared as regular, straight elements in longitudinal sections. We assume that gamma-tubulin is located at the pole proximal ends of the MTs and/or is associated with the spindle MTs throughout their lengths. In order to distinguish between these possibilities, testes of Ephestia kuehniella (Pyralidae), a laboratory species, were cold-treated prior to double-labeling with antibodies to beta- and gamma-tubulin. The treatment was expected to depolymerize MTs. Astral MTs, which were nucleated end-on by gamma-tubulin-containing material, indeed depolymerized. In contrast, the gamma-tubulin-containing spindle MTs persisted. It is, therefore, conceivable that gamma-tubulin is associated with MTs throughout their lengths in male meiosis of Lepidoptera species. It is plausible that this association stabilizes the MTs against cold-induced disassembly. © 1996 Wiley-Liss, Inc.     

FURTHER OBSERVATIONS ON THE CLUSTERS OF GRANULAR MATERIAL AROUND THE CENTRIOLE IN THE SEA URCHIN EGG: CHANGES IN DISTRIBUTION DURING MITOSIS*

Changes in the distribution of pericentriolar material, which was called “clusters of granular material”, in a previous paper were observed during mitosis of the sea urchin egg by electron microscopy using thick sections. At prophase, small clusters in an early stage of formation were observed near the nucleus. At prometaphase, the clusters appeared to aggregate loosely at the poles of the spindle. They formed large masses at metaphase, while at late anaphase they became reduced in size and formed an array at right angles to the spindle axis. Some clusters still remained near the karyomeres at telophase and then became closely associated with the daughter nucleus. The clusters were closely associated with the astral microtubules and spindle microtubules at prophase and prometaphase, respectively. The granular material is suggested to be a nucleating site of microtubule assembly during mitosis.     

Slk19 enhances cross-linking of microtubules by Ase1 and Stu1

The Saccharomyces cerevisiae protein Slk19 has been shown to localize to kinetochores throughout mitosis and to the spindle midzone in anaphase. However, Slk19 clearly also has an important role for spindle formation and stabilization in prometaphase and metaphase, albeit this role is unresolved. Here we show that Slk19’s localization to metaphase spindles in vivo and to microtubules (MTs) in vitro depends on the MT cross-linking protein Ase1 and the MT cross-linking and stabilizing protein Stu1. By analyzing a slk19 mutant that specifically fails to localize to spindles and MTs, we surprisingly found that the presence of Slk19 amplified the amount of Ase1 strongly and that of Stu1 moderately at the metaphase spindle in vivo and at MTs in vitro. Furthermore, Slk19 markedly enhanced the cross-linking of MTs in vitro when added together with Ase1 or Stu1. We therefore suggest that Slk19 recruits additional Ase1 and Stu1 to the interpolar MTs (ipMTs) of metaphase spindles and thus increases their cross-linking and stabilization. This is in agreement with our observation that cells with defective Slk19 localization exhibit shorter metaphase spindles, an increased number of unaligned nuclear MTs, and most likely reduced ipMT overlaps.     

The kinetochore fiber structure in the acentric spindles of the green algaOedogonium

Summary The microtubule (MT) arrangement in three kinetochore fibers in the acentric spindles of the green algaOedogonium cardiacum were reconstructed from serial sections of prometaphase and metaphase cells. The majority of the MTs attached to the kinetochore (kMTs) are relatively short, extending less than a third of the distance to the putative spindle pole region, and none extended the full distance. Fine filaments and a matrix described earlier (Schibler andPickett-Heaps 1980) were associated with the MTs all along the fibers. Live cells ofOedogonium were also studied by time lapse cinematography for correlation with the ultrastructural observations. Late prometaphase and metaphase kinetochore fibers appear to move independently as if unattached at their poleward ends. These observations suggest that kinetochore fibers inOedogonium are not attached to a specific pole structure from late prometaphase until the inception of anaphase. The results are discussed with reference to spindle structure and function in general.     

Microtubule organization in cultured soybean and black spruce cells: Interphase —mitosis transition and spindle morphology

Summary Microtubule (MT) distribution during the cell cycle, especially spindle organization, has been investigated using immunofluorescence light microscopy in cultured cells of two higher plant species, soybean (angiosperm) and black spruce (gymnosperm). In soybean, the prophase and metaphase spindles were different in morphology and structure. The prophase spindle covering the nucleus was barrel-shaped and MTs extended between poles. The metaphase spindle consisted mainly of short MT bundles on either side of the chromosome mass. During prometaphase, the polarity and shape of the prophase spindle disappeared, suggesting that the metaphase spindle is newly formed in prometaphase and not derived from the prophase spindle. A striking feature of MT organization in black spruce was sharply defined poles during prometaphase and anaphase. They were located close to the cell edge, suggesting that a structure in the cytoplasm or associated with the plasma membrane is responsible for their formation. In black spruce the metaphase spindle was long with pointed poles and MT fir tree structures. In contrast, the metaphase spindle of soybean was short with very broad poles and lacked MT fir trees. These results suggest that MT fir tree structure may not be necessary for a functional spindle.     

Kinetochore-microtubule interactions: steps towards bi-orientation

Eukaryotic cells segregate their chromosomes accurately to opposite poles during mitosis, which is necessary for maintenance of their genetic integrity. This process mainly relies on the forces generated by kinetochore-microtubule (KT-MT) attachment. During prometaphase, the KT initially interacts with a single MT extending from a spindle pole and then moves towards a spindle pole. Subsequently, MTs from the other spindle pole also interact with the KT. Eventually, one sister KT becomes attached to MTs from one pole while the other sister to those from the other pole (sister KT bi-orientation). If sister KTs interact with MTs with aberrant orientation, this must be corrected to attain proper bi-orientation (error correction) before the anaphase is initiated. Here, I discuss how KTs initially interact with MTs and how this interaction develops into bi-orientation; both processes are fundamentally crucial for proper chromosome segregation in the subsequent anaphase.     

Mechanism for Anaphase B: Evaluation of “Slide-and-Cluster” versus “Slide-and-Flux-or-Elongate” Models

Elongation of the mitotic spindle during anaphase B contributes to chromosome segregation in many cells. Here, we quantitatively test the ability of two models for spindle length control to describe the dynamics of anaphase B spindle elongation using experimental data from Drosophila embryos. In the slide-and-flux-or-elongate (SAFE) model, kinesin-5 motors persistently slide apart antiparallel interpolar microtubules (ipMTs). During pre-anaphase B, this outward sliding of ipMTs is balanced by depolymerization of their minus ends at the poles, producing poleward flux, while the spindle maintains a constant length. Following cyclin B degradation, ipMT depolymerization ceases so the sliding ipMTs can push the poles apart. The competing slide-and-cluster (SAC) model proposes that MTs nucleated at the equator are slid outward by the cooperative actions of the bipolar kinesin-5 and a minus-end-directed motor, which then pulls the sliding MTs inward and clusters them at the poles. In assessing both models, we assume that kinesin-5 preferentially cross-links and slides apart antiparallel MTs while the MT plus ends exhibit dynamic instability. However, in the SAC model, minus-end-directed motors bind the minus ends of MTs as cargo and transport them poleward along adjacent, parallel MT tracks, whereas in the SAFE model, all MT minus ends that reach the pole are depolymerized by kinesin-13. Remarkably, the results show that within a narrow range of MT dynamic instability parameters, both models can reproduce the steady-state length and dynamics of pre-anaphase B spindles and the rate of anaphase B spindle elongation. However, only the SAFE model reproduces the change in MT dynamics observed experimentally at anaphase B onset. Thus, although both models explain many features of anaphase B in this system, our quantitative evaluation of experimental data regarding several different aspects of spindle dynamics suggests that the SAFE model provides a better fit.     

Ultraviolet microbeam irradiations of mitotic diatoms: investigation of spindle elongation

Our simple instrumentation for generating a UV-microbeam is described UV microbeam irradiations of the central spindle in the pennate diatom Hantzschia amphioxys have been examined through correlated birefringence light microscopy and TEM. A precise correlation between the region of reduced birefringence and the UV-induced lesion in the microtubules (MTs) of the central spindle is demonstrated. The UV beam appears to dissociate MTs, as MT fragments were rarely encountered. The forces associated with metaphase and anaphase spindles have been studied via localized UV-microbeam irradiation of the central spindle. These spindles were found to be subjected to compressional forces, presumably exerted by stretched or contracting chromosomes. Comparisons are made with the results of other writers. These compressional forces caused the poles of a severed anaphase spindle to move toward each other and the center of the cell. As these poles moved centrally, the larger of the two postirradiational central spindle remnants elongated with a concomitant decrease in the length of the overlap. Metaphase spindles, in contrast, did not elongate nor lose their overlap region. Our interpretation is that the force for anaphase spindle elongation in Hantzschia is generated between half-spindles in the region of MT overlap.     

Microtubule dynamics in the spindle. Theoretical aspects of assembly/disassembly reactions in vivo

The mitotic spindle contains several classes of microtubules (MTs) whose lengths change independently during mitosis. Precise control over MT polymerization and depolymerization during spindle formation, anaphase chromosome movements, and spindle breakdown is necessary for successful cell division. This model proposes the site of addition and removal of MT subunits in each of four classes of spindle MTs at different stages of mitosis, and suggests how this addition and removal is controlled. We propose that spindle poles and kinetochores significantly alter the assembly-disassembly kinetics of associated MT ends. Control of MT length is further modulated by localized forces affecting assembly and disassembly kinetics of individual sets of MTs.     

Light and electron microscopy of rat kangaroo cells in mitosis

Kinetochores in rat kangaroo (PtK₂) cells in prophase of mitosis are finely fibrillar, globular bodies, 5000–8000 Å in diameter. Sister kinetochores are attached to opposite lateral faces in the primary constriction of chromosomes. No microtubules (MTs) occur in prophase nuclei. During prometaphase the ball-shaped kinetochores differentiate into trilaminar plaques. An outer kinetochore layer, less electron dense than chromatin, appears first in the fibrillar matrix. The inner layer, continuous with, but more electron dense than the chromosome, is formed later. Kinetochore-spindle MT interaction is evident at the very beginning of prometaphase. As a result, kinetochore shape is very variable, but three types of kinetochores can be distinguished by fine structure analysis. A comparison of kinetochore structure and chromosome position in the mitotic spindle yielded clues regarding initial orientation and congression. At the time the nuclear envelope (NE) breaks down chromosomes near asters orient first. Chromosomes approximately equidistant from the two spindle poles amphi-orient immediately. Chromosomes closer to one pole probably achieve mono-orientation first, then amphi-orient and congress. In normal metaphase all the chromosomes lie at or near the spindle equator and kinetochores are structurally uniform. Paraxial and para-equatorial sections revealed that they are trilaminar, roughly circular plaques of 4000–6000 Å diameter. Inner and outer layers are 400 Å, and the electron translucent middle layer which separates them is 270 Å thick. From 16 to 40 MTs are anchored in the outer layer. In cold-treated cells the kinetochores are trilaminar, but in colcemid-treated cells the inner layer is lacking. Both kinetochores and their MTs are disorganized beginning in late anaphase. In telophase the inner layer persists for some time as an electron dense patch apposed to the NE, while the outer layer disintegrates.     

Indirect immunofluorescence of microtubules in Dictyostelium discoideum. A study with polyclonal and monoclonal antibodies to tubulins

Amebae of D. discoideum on coverslips were fixed in situ with glutaraldehyde and permeabilized with Triton X-100. Of six antibodies tested, only a monoclonal antibody to yeast tubulin consistently gave bright fluorescence. Counterstaining with DAPI facilitated the identification of interphase and mitotic stages. Most microtubules (MTs) in interphase amebae emanated from a nucleus-associated centre that had a non-fluorescent core. Amebae in early stages of mitosis lacked cytoplasmic MTs almost entirely. The nascent spindle in prophase appeared as a brightly fluorescent dot, whereas the prometaphase spindle was a short rod. Spindles in metaphase and anaphase nuclei were more elongate, some consisting of several fluorescent lines. Astral MTs were prominent on spindles in anaphase and telophase. Asters are obviously converted to the interphase complex of MTs in post-mitotic cells, while the shaft-like remnant of the central spindle disappears. The cyclical changes in the MT system related to cell division resemble those observed in higher eukaryotes and probably reflect changes in the locomotory behavior of the amebae rather than changes in cell shape.     

An immunofluorescence study of mitosis in a mite-pathogen,Neozygites sp. (Zygomycetes: Entomophthorales)

Summary Mitosis in a mite-pathogenic species ofNeozygites (Zygomycetes: Entomophthorales) was investigated by indirect immunofluorescence microscopy using an antibody against -tubulin for visualization of microtubules (MTs). DAPI and rhodamine-conjugated phalloidin were used to stain chromatin and actin, respectively. Salient features of mitosis inNeozygites sp. are (1) a strong tendency for mitotic synchrony in any given cell, (2) conical protrusions at the poles of metaphase and anaphase nuclei revealed by actin staining, (3) absence of astral and other cytoplasmic MTs, (4) a spindle that occupies most of the nuclear volume at metaphase, (5) a spindle that remains symmetrical throughout most of mitosis, (6) kinetochore MTs that shorten during anaphase A, (7) a central spindle that elongates during anaphase B, pushing the daughter nuclei into the cell apices, and (8) interpolar MTs that continue to elongate even after separation of the daughter nuclei. Cortical cytoplasmic MTs are present in a few interphasic and post-cytokinetic cells. The data presented show thatNeozygites possesses features unique to this genus and support the erection of theNeozygitaceae as a separate family in theEntomophthorales.Abbreviations DAPI 4,6-diamidino-2-phenylindole - MT microtubule - SPB spindle pole body