Combinatorial optimization of the DNA cleaving Ni(II) x Xaa-Xaa-His metallotripeptide domain

A positional-scanning combinatorial protocol was employed to optimize the deoxyribose-based cleavage of B-form DNA by Ni(II) x Xaa-Xaa-His metallopeptides. This procedure employed 18 naturally occurring amino acids (excluding Cys and Trp) to generate two libraries in which the first and second positions of the peptide ligand were varied. Increased direct DNA cleavage relative to Ni(II) x Gly-Gly-His was observed when (1) the amino-terminal peptide position contained Pro, Met, Arg, or Lys (with Pro exhibiting the greatest activity) and (2) the second peptide position contained Lys, Arg, Met, Ser, or Thr (with Lys exhibiting the greatest activity); the optimized metallopeptide, Ni(II) x Pro-Lys-His, was found to cleave DNA an order of magnitude better than Ni(II) x Gly-Gly-His. While metal complexation and the A/T-rich site selectivity of the optimized metallopeptides were not altered, DNA binding affinity was slightly increased relative to Ni(II) x Gly-Gly-His, however, not to an extent necessary to account for the observed increase in reactivity. Examination of molecular models of Ni(II) x Pro-Lys-His bound to the minor groove of DNA via hydrogen bonding of the His N3 imidazole hydrogen to the N3 of adenine or O2 of thymine suggests that the Pro residue can make hydrophobic contacts with the sugars lining the walls of the groove while the Lys residue is able to form a salt bridge with a proximal phosphate; with these interactions, the metal center is poised to abstract the C4'-H of an adjacent nucleotide suggesting that noncovalent interactions result in a positioning which contributes to increased DNA cleavage activity.     

A Comparative study of Fe(II) and Fe(III) interactions with DNA duplex: major and minor grooves bindings

The involvement of the Fe cations in autoxidation in cells and tissues is well documented. DNA is a major target in such reaction, and can chelate Fe cation in many ways. The present study was designed to examine the interaction of calf-thymus DNA with Fe(II) and Fe(III), in aqueous solution at pH 6.5 with cation/DNA (P) (P = phosphate) molar ratios (r) of 1:160 to 1:2. Capillary electrophoresis and Fourier transform infrared (FTIR) difference spectroscopic methods were used to determine the cation binding site, the binding constant, helix stability and DNA conformation in Fe-DNA complexes. Structural analysis showed that at low cation concentration (r = 1/80 and 1/40), Fe(II) binds DNA through guanine N-7 and the backbone PO(2) group with specific binding constants of K(G) = 5.40 x 10(4) M(1) and K(P) = 2.40 x 10(4) M(1). At higher cation content, Fe(II) bindings to adenine N-7 and thymine O-2 are included. The Fe(III) cation shows stronger interaction with DNA bases and the backbone phosphate group. At low cation concentration (r = 1:80), Fe(III) binds mainly to the backbone phosphate group, while at higher metal ion content, cation binding to both guanine N-7 atom and the backbone phosphate group is prevailing with specific binding constants of K(G) = 1.36 x 10(5) M(-1) and K(P) = 5.50 x 10(4) M(-1). At r = 1:10, Fe(II) binding causes a minor helix destabilization, whereas Fe(III) induces DNA condensation. No major DNA conformational changes occurred upon iron complexation and DNA remains in the B-family structure.     

Chimeric HTH motifs based on EF-hands

The design of a new peptide construct from two structurally equivalent basis motifs is reported. A chimera was designed from the helical regions of a helix-turn-helix (HTH) domain, incorporating the consensus EF-hand Ca-binding loop at the turn. Two 33-residue peptides were constructed: one (P3, designed) includes the 12-residue consensus EF-hand loop, while the other (P2, control) contains the reversed EF-hand loop sequence. The Eu(III) and Ca(II) binding properties of P2 and P3 were investigated by circular dichroism and NMR. The designed peptide (P3) is 25% helical in its Eu(III)-saturated form, and 14% helical with excess Ca(II). Both the free and Eu-bound peptides have inherent solution structure, as demonstrated by the helicity induced by the addition of trifluoroethanol solvent. While Eu(III) binding stabilizes the structure of P3, it destabilizes the structure of P2. The NMR titration of P3 with Eu(III) resulted in new resonances characteristic of Ca-bound EF-hand loops. As observed for isolated EF-hands, the resonances appear within the first 0.5 equivalents of Eu(III) added, suggesting that one metal ion organizes two equivalents of peptide to fold into the back-to-back dimer structure of native EF-hands. The EuP3 chimera, but not EuP2, has significant affinity for supercoiled plasmid DNA, causing a gel shift at concentrations as low as 10 microM EuP3 (50 microM base pairs). These results show our chimeric peptide combines the characteristics of the parent motifs, maintaining both metal binding and DNA affinity.     

A comparative study of calf thymus DNA binding to Cr(III) and Cr(VI) ions. Evidence for the guanine N-7-chromium-phosphate chelate formation

Chromium(VI) salts are well known to be mutagens and carcinogens and to easily cross the cell membranes. Because they are powerful oxidizing agents, Cr(VI) reacts with intracellular materials to reduce to trivalent form, which binds DNA. This study was designed to investigate the interaction of calf thymus DNA with Cr(VI) and Cr(III) in aqueous solution at pH 6.5-7.5, using Cr(VI)/DNA(P) molar ratios (r) of 1:20 to 2:1 and Cr(III)/DNA(P) molar ratios (r) of 1:80 to 1:2. UV-visible and Fourier transform infrared (FTIR) difference spectroscopic methods were used to determine the metal ion-binding sites, binding constants, and the effect of cation complexation on DNA secondary structure. Spectroscopic results showed no interaction of Cr(VI) with DNA at low anion concentrations (r = 1:20 to 1:1), whereas some perturbations of DNA bases and backbone phosphate were observed at very high Cr(VI) contents (r > 1) with overall binding constant of K = 508 M(-1). Cr(III) chelates DNA via guanine N-7 and the nearest PO(2) group with overall binding constant of K = 3.15 x 10(3) M(-1). Evidence for cation chelate formation comes from major shiftings and intensity variations of the guanine band at 1717 and the phosphate asymmetric stretching vibration at 1222 cm(-1). At low Cr(III) concentration (r = 1:40), the number of Cr(III) ions bound to DNA were 6-7 cations/500 base pairs, and this increased to 30-35 cations/500 base pairs at high metal ion content (r = 1:4). DNA condensation occurred at high cation concentration (r = 1:10). No major alteration of DNA conformation was observed, and the biopolymer remained in the B family structure upon chromium complexation.     

X-ray structures of five renin inhibitors bound to saccharopepsin: exploration of active-site specificity

Saccharopepsin is a vacuolar aspartic proteinase involved in activation of a number of hydrolases. The enzyme has great structural homology to mammalian aspartic proteinases including human renin and we have used it as a model system to study the binding of renin inhibitors by X-ray crystallography. Five medium-to-high resolution structures of saccharopepsin complexed with transition-state analogue renin inhibitors were determined. The structure of a cyclic peptide inhibitor (PD-129,541) complexed with the proteinase was solved to 2.5 A resolution. This inhibitor has low affinity for human renin yet binds very tightly to the yeast proteinase (K(i)=4 nM). The high affinity of this inhibitor can be attributed to its bulky cyclic moiety spanning P(2)-P(3)' and other residues that appear to optimally fit the binding sub-sites of the enzyme. Superposition of the saccharopepsin structure on that of renin showed that a movement of the loop 286-301 relative to renin facilitates tighter binding of this inhibitor to saccharopepsin. Our 2.8 A resolution structure of the complex with CP-108,420 shows that its benzimidazole P(3 )replacement retains one of the standard hydrogen bonds that normally involve the inhibitor's main-chain. This suggests a non-peptide lead in overcoming the problem of susceptible peptide bonds in the design of aspartic proteinase inhibitors. CP-72,647 which possesses a basic histidine residue at P(2), has a high affinity for renin (K(i)=5 nM) but proves to be a poor inhibitor for saccharopepsin (K(i)=3.7 microM). This may stem from the fact that the histidine residue would not bind favourably with the predominantly hydrophobic S(2) sub-site of saccharopepsin.     

Cellular activity of Rev response element RNA targeting metallopeptides

The cellular chemistry of metallopeptide complexes designed to target and inactivate an HIV Rev response element (RRE) RNA sequence in vivo has been evaluated by use of an efficient cellular fluorescence assay. Transcribed messenger RNA encoding the green fluorescent protein (GFP) that includes a target RNA sequence is sensitive to cleavage chemistry mediated by metal derivatives of GGH(G) _x TRQARRNRR RRWRERQR (x = 0, 1, 2, 4, 6). This results in a significant decrease in expression of GFP that can be quantified by fluorimetry. Optimal inactivation of the target RRE RNA was achieved with linkers where x = 0 or 1. Neither the Rev control peptide (lacking metal-binding or linker sequences) nor the metal-binding motif alone had any significant effect. Consequently, both the cleavage motif and the RNA targeting motif are essential to promote cellular cleavage of the target RRE RNA. However, target inactivation was also observed in experiments with metal-free peptide, consistent with recruitment of intracellular metal ion by the peptide following cellular uptake, with subsequent cleavage of the RRE target RNA. The RRE RNA cleavage activities of metallopeptide complexes were further confirmed by in vitro experiments and mammalian cell assays.     

The energetics of the interaction of BamHI endonuclease with its recognition site GGATCC

The interaction of BamHI endonuclease with DNA has been studied crystallographically, but has not been characterized rigorously in solution. The enzyme binds in solution as a homodimer to its recognition site GGATCC. Only six base-pairs are directly recognized, but binding affinity (in the absence of the catalytic cofactor Mg(2+)) increases 5400-fold as oligonucleotide length increases from 10 to 14 bp. Binding is modulated by sequence context outside the recognition site, varying about 30-fold from the bes t (GTG or TAT) to the worst (CGG) flanking triplets. BamHI, EcoRI and EcoRV endonucleases all have different context preferences, suggesting that context affects binding by influencing the free energy levels of the complexes rather than that of the free DNA. Ethylation interference footprinting in the absence of divalent metal shows a localized and symmetrical pattern of phosphate contacts, with strong contacts at NpNpNpGGApTCC. In the presence of Mg(2+), first-order cleavage rate constants are identical in the two GGA half-sites, are the same for the two nicked intermediates and are unaffected by substrate length in the range 10-24 bp. DNA binding is strongly enhanced by mutations D94N, E111A or E113K, by binding of Ca(2+) at the active site, or by deletion of the scissile phosphate GpGATCC, indicating that a cluster of negative charges at the catalytic site contributes at least 3-4 kcal/mol of unfavorable binding free energy. This electrostatic repulsion destabilizes the enzyme-DNA complex and favors metal ion binding and progression to the transition state for cleavage.     

Structure, binding interface and hydrophobic transitions of Ca2+-loaded calbindin-D(28K)

Calbindin-D(28K) is a Ca2+-binding protein, performing roles as both a calcium buffer and calcium sensor. The NMR solution structure of Ca2+-loaded calbindin-D(28K) reveals a single, globular fold consisting of six distinct EF-hand subdomains, which coordinate Ca2+ in loops on EF1, EF3, EF4 and EF5. Target peptides from Ran-binding protein M and myo-inositol monophosphatase, along with a new target from procaspase-3, are shown to interact with the protein on a surface comprised of alpha5 (EF3), alpha8 (EF4) and the EF2-EF3 and EF4-EF5 loops. Fluorescence experiments reveal that calbindin-D(28K) adopts discrete hydrophobic states as it binds Ca2+. The structure, binding interface and hydrophobic characteristics of Ca2+-loaded calbindin-D(28K) provide the first detailed insights into how this essential protein may function. This structure is one of the largest high-resolution NMR structures and the largest monomeric EF-hand protein to be solved to date.     

Influence of Cr(III) and Cr(VI) on the interaction between sparfloxacin and calf thymus DNA

Cr(III) and Cr(VI) have different binding capacity with sparfloxacin, and have different combination modes with calf thymus DNA. Selecting these two different metal ions, the influence of them on the binding constants between sparfloxacin (SPFX) and calf thymus DNA, as well as the related mechanism has been studied by using absorption and fluorescence spectroscopy. The result shows that Cr(III) has weaker binding capacity to SPFX in the SPFX-Cr(III) binary system, but influences the binding between SPFX and DNA obviously in SPFX-DNA-Cr(III) ternary system. However, although Cr(VI) has a stronger binding capacity to SPFX, it has no effect on the binding between SPFX and DNA. Referring to the different modes of Cr(III) and Cr(VI) binding to DNA, the mechanism of the influence of metal ions on the binding between SPFX and DNA has been proposed. SPFX can directly bind to DNA by chelating DNA base sites. If a metal ion at certain concentration binds mainly to DNA bases, it can decrease the binding constants between SPFX and DNA through competing with SPFX. While if a metal ion at certain concentration mainly binds to phosphate groups of DNA, it can increase the binding constants by building a bridge between SPFX and DNA. If a metal ion at certain concentrations binds neither to bases nor phosphate groups in DNA, it will have no effect on the binding constant between SPFX and DNA. Our result supports Palumbo's conclusion that the binding between SPFX and the phosphata groups is the precondition for the combination between SPFX and DNA, which is stabilized through stacking interactions between the condensed rings of SPFX and DNA bases.     

Cleavage of double helical DNA by Cu2+ ion in the presence of bisintercalator containing penta(ethylene glycol) connector chain

In designing new DNA recognizing and cleaving reagents, we introduce herein a bisacridine derivative (referred to as bisacridine) in which two acridine heterocycles are connected by a penta(ethylene glycol) bridging chain. This compound offers two possible functions: 1, stabilization of DNA bisacridine intercalator complex by metal ion. The penta(ethylene glycol) chain stabilizes metal ions binding to the phosphate site of DNA, where the penta(ethylene glycol) chain constitutes a part of a pseudomacrocyclic ligand for metal binding; and 2, enhancement of metal-assisted hydrolytic cleavage of DNA by means of a metal concentration effect by the pseudomacrocyclic ethereal chain. The binding isotherms of bisacridine with DNA in the presence of metal ions showed that the binding was mainly governed by the cation exchange reaction on the anionic DNA polymer chain, i.e., the exchange between metal ions and the cationic bisacridine. The bisacridine showed an increase DNA binding ability compared to quinacrine, the monoacridine counterpart, and caused an enhancement of DNA cleavage in the presence of Cu2+ ions. Additional experiments which included DNase 1 footprinting in the presence of bisacridine and the DNA cleavage by Cu2+/bisacridine using a 32P end-labelled DNA fragment, suggested that the Cu2(+)-assisted DNA cleavage sites in the presence of bisacridine were in reasonable overlap with the DNA binding sites of bisacridine.     

Effects of backbone contacts 3' to the abasic site on the cleavage and the product binding by human apurinic/apyrimidinic endonuclease (APE1)

The mammalian apurinic/apyrimidinic (AP) endonuclease (APE1) is a multifunctional protein that plays essential roles in DNA repair and gene regulation. We decomposed the APEs into 12 blocks of highly conserved sequence and structure (molegos). This analysis suggested that residues in molegos common to all APEs, but not to the less specific nuclease, DNase I, would dictate enhanced binding to damaged DNA. To test this hypothesis, alanine was substituted for N226 and N229, which form hydrogen bonds to the DNA backbone 3' of the AP sites in crystal structures of the APE1/DNA complex. While the cleavage rate at AP sites of both N226A and N229A mutants increased, their ability to bind to damaged DNA decreased. The ability of a double mutant (N226A/N229A) to bind damaged DNA was further decreased, while the V(max) was almost identical to that of the wild-type APE1. A double mutant at N226 and R177, a residue that binds to the same phosphate as N229, had a significantly decreased activity and substrate binding. As the affinity for product DNA was decreased in all the mutants, the enhanced reaction rate of the single mutants could be due to alleviation of product inhibition of the enzyme. We conclude that hydrogen bonds to phosphate groups 3' to the cleavage site is essential for APE1's binding to the product DNA, which may be necessary for efficient functioning of the base excision repair pathway. The results indicate that the molego analysis can aid in the redesign of proteins with altered binding affinity and activity.     

Binding effect and design of a competitive inhibitory peptide for HMG-CoA reductase through modeling of an active peptide backbone

This study presents an application of two approaches in the design of constrained and unconstrained peptides in an investigation of the peptide binding effect for HMG-CoA reductase (HMGR). In previous works, hypocholesterolemic peptides isolated from soybean were determined as competitive inhibitory peptides for HMGR. Based on the modeling of an active peptide backbone in the active site of HMGR, two peptide libraries for constrained and unconstrained peptides were designed using different amino acids varying in hydrophobicity and electronic properties. Active peptides were selected by the design parameter 'V' or 'Pr', which reflects the probability of active peptide conformations for constrained and unconstrained peptides, respectively. Using peptides designed as mimics of HMGR substrates, and a combination of in vitro test and circular dichroism study, it was found that: (1) peptide binding causes an ordering of secondary structure, reflecting an increase of alpha-helical content; (2) HMGR binds the peptide without closure of the active site; and (3) peptide binding induces the protein aggregation. The GFPDGG peptide (IC(50)=1.5 microM), designed on the basis of the rigid peptide backbone, increases the inhibitory potency more than 300 times compared to the first isolated LPYP peptide (IC(50)=484 microM) from soybean. The obtained data imply the possibility of designing a highly potent inhibitory peptide for HMGR and confirm that changes of the secondary structure in the enzyme play an important role in the mechanism of HMGR inhibition.     

Ni(II) and Cu(II) binding with a 14-aminoacid sequence of Cap43 protein, TRSRSHTSEGTRSR

The tetradecapeptide containing the 10 aminoacid repeated sequence on the C-terminus of the Ni(II)-induced Cap43 protein, was analyzed for Ni(II) and Cu(II) binding. A combined pH-metric and spectroscopic UV-VIS, EPR, CD and NMR study of Ni(II) and Cu(II) binding to the blocked CH3CO-Thr-Arg-Ser-Arg-Ser-His-Thr-Ser-Glu-Gly-Thr-Arg-Ser-Arg-NH2 (Ac-TRSRSHTSEGTRSR-Am) peptide, modeling a part of the C-terminal sequence of the Cap43 protein, revealed the formation of octahedral complexes involving imidazole nitrogen of histidine, at pH 5.5 and pH 7 for Cu(II) and Ni(II), respectively; a major square planar 4N-Ni(II) complex (about 100% at pH 9, log K* = -28.16) involving imidazole nitrogen of histidine and three deprotonated amide nitrogens of the backbone of the peptide was revealed; a 3N-Cu(II) complex (maximum about 70% at pH 7, log K*=-13.91) and a series of 4N-Cu(II) complexes starting at pH 5.5 (maximum about 90% at pH 8.7, log K* = -21.39 for CuH(-3)L), were revealed. This work supports the existence of a metal binding site at the COOH-terminal part of the Cap43 peptide.     

Investigation of restriction enzyme cofactor requirements: a relationship between metal ion properties and sequence specificity

Restriction enzymes are important model systems for understanding the mechanistic contributions of metal ions to nuclease activity. These systems are unique in that they combine distinct functions which have been shown to depend on metal ions: high-affinity DNA binding, sequence-specific recognition of DNA, and Mg(II)-dependent phosphodiester cleavage. While Ca(II) and Mn(II) are commonly used to promote DNA binding and cleavage, respectively, the metal ion properties that are critical to the support of these functions are not clear. To address this question, we assessed the abilities of a series of metal ions to promote DNA binding, sequence specificity, and cleavage in the representative PvuII endonuclease. Among the metal ions tested [Ca(II), Sr(II), Ba(II), Eu(III), Tb(III), Cd(II), Mn(II), Co(II), and Zn(II)], only Mn(II) and Co(II) were similar enough to Mg(II) to support detectable cleavage activity. Interestingly, cofactor requirements for the support of DNA binding are much more permissive; the survey of DNA binding cofactors indicated that Cd(II) and the heavier and larger alkaline earth metal ions Sr(II) and Ba(II) were effective cofactors, stimulating DNA binding affinity 20-200-fold. Impressively, the trivalent lanthanides Tb(III) and Eu(III) promoted DNA binding as efficiently as Ca(II), corresponding to an increase in affinity over 1000-fold higher than that observed under metal-free conditions. The trend for DNA binding affinity supported by these ions suggests that ionic radius and charge are not critical to the promotion of DNA binding. To examine the role of metal ions in sequence discrimination, we determined specificity factors [K(a)(specific)/K(a)(nonspecific)] in the presence of Cd(II), Ba(II), and Tb(III). Most interestingly, all of these ions compromised sequence specificity to some degree compared to Ca(II), by either increased affinity for a noncognate sequence, decreased affinity for the cognate sequence, or both. These results suggest that while amino acid-base contacts are important for specificity, the properties of metal ion cofactors at the catalytic site are also critical for sequence discrimination. This insight is invaluable to our efforts to understand and subsequently design sequence-specific nucleases.     

Silver(I) complexes with DNA and RNA studied by Fourier transform infrared spectroscopy and capillary electrophoresis

Ag(I) is a strong nucleic acids binder and forms several complexes with DNA such as types I, II, and III. However, the details of the binding mode of silver(I) in the Ag-polynucleotides remains unknown. Therefore, it was of interest to examine the binding of Ag(I) with calf-thymus DNA and bakers yeast RNA in aqueous solutions at pH 7.1-6.6 with constant concentration of DNA or RNA and various concentrations of Ag(I). Fourier transform infrared spectroscopy and capillary electrophoresis were used to analyze the Ag(I) binding mode, the binding constant, and the polynucleotides' structural changes in the Ag-DNA and Ag-RNA complexes. The spectroscopic results showed that in the type I complex formed with DNA, Ag(I) binds to guanine N7 at low cation concentration (r = 1/80) and adenine N7 site at higher concentrations (r = 1/20 to 1/10), but not to the backbone phosphate group. At r = 1/2, type II complexes formed with DNA in which Ag(I) binds to the G-C and A-T base pairs. On the other hand, Ag(I) binds to the guanine N7 atom but not to the adenine and the backbone phosphate group in the Ag-RNA complexes. Although a minor alteration of the sugar-phosphate geometry was observed, DNA remained in the B-family structure, whereas RNA retained its A conformation. Scatchard analysis following capillary electrophoresis showed two binding sites for the Ag-DNA complexes with K(1) = 8.3 x 10(4) M(-1) for the guanine and K(2) = 1.5 x 10(4) M(-1) for the adenine bases. On the other hand, Ag-RNA adducts showed one binding site with K = 1.5 x 10(5) M(-1) for the guanine bases.     

A transition state analog for phosphate diester cleavage catalyzed by a small enzyme-like metal ion complex

The values of K(i) for methylphosphate dianion (MP(2-)) inhibition of the cleavage of 2-hydroxypropyl-4-nitrophenyl phosphate (HpPNP) catalyzed by 1,3-bis(1,4,7-triazacyclonon-1-yl)-2-hydroxypropane (Zn(2)(1)(H(2)O)) approach a small limiting value of 6 microM at pH相似文献   

Solution structures of the YAP65 WW domain and the variant L30 K in complex with the peptides GTPPPPYTVG, N-(n-octyl)-GPPPY and PLPPY and the application of peptide libraries reveal a minimal binding epitope.

The single mutation L30 K in the Hu-Yap65 WW domain increased the stability of the complex with the peptide GTPPPPYTVG (K(d)=40(+/-5) microM). Here we report the refined solution structure of this complex by NMR spectroscopy and further derived structure-activity relationships by using ligand peptide libraries with truncated sequences and a substitution analysis that yielded acetyl-PPPPY as the smallest high-affinity binding peptide (K(d)=60 microM). The structures of two new complexes with weaker binding ligands chosen based on these results (N-(n-octyl)-GPPPYNH(2) and Ac-PLPPY) comprising the wild-type WW domain of Hu-Yap65 were determined. Comparison of the structures of the three complexes were useful for identifying the molecular basis of high-affinity: hydrophobic and specific interactions between the side-chains of Y28 and W39 and P5' and P4', respectively, and hydrogen bonds between T37 (donnor) and P5' (acceptor) and between W39 (donnor) and T2' (acceptor) stabilize the complex.The structure of the complex L30 K Hu-Yap65 WW domain/GTPPPPYTVG is compared to the published crystal structure of the dystrophin WW domain bound to a segment of the beta-dystroglycan protein and to the solution structure of the first Nedd4 WW domain and its prolin-rich ligand, suggesting that WW sequences bind proline-rich peptides in an evolutionary conserved fashion. The position equivalent to T22 in the Hu-Yap65 WW domain sequence is seen as responsible for differentiation in the binding mode among the WW domains of group I.     

The metal-binding properties of DREAM: evidence for calcium-mediated changes in DREAM structure.

DREAM, an EF-hand protein, associates with and modulates the activity of presenilins and Kv4 potassium channels in neural and cardiac tissues and represses prodynorphin and c-fos gene expression by binding to DNA response elements in these genes. Information concerning the metal-binding properties of DREAM and the consequences of metal binding on protein structure are important in understanding how this protein functions in cells. We now show that DREAM binds 1 mol of calcium/mol of protein with relatively high affinity and another 3 mol of calcium with lower affinity. DREAM binds 1 mol of magnesium/mol of protein. DREAM, pre-loaded with 1 mol of calcium, binds 1 mol of magnesium, thus demonstrating that the magnesium-binding site is distinct from the high affinity calcium-binding site. Analysis of metal binding to mutant DREAM protein constructs localizes the high affinity calcium-binding site and the magnesium-binding site to EF-hands 3 or 4. Binding of calcium but not magnesium changes the conformation, stability, and alpha-helical content of DREAM. Calcium, but not magnesium, reduces the affinity of apo-DREAM for specific DNA response elements in the prodynorphin and c-fos genes. We conclude that DREAM binds calcium and magnesium and that calcium, but not magnesium, modulates DREAM structure and function.